HDCP support for T60p Soundmax HD driver

Hello,
I would like to be able to playback audio that requires HDCP compliance. When I try to play the HD source, it fails with an error that My audio card does not support protected audio playback.
I have tried to disable the digital audio out in the Soundmax control panel, but it does not help.
Is there a newer Soundmax HD driver available for Xp-32 bit ?

I tried many times to uninstall and re-install the driver and I'm having some really bad issues now. So currently, if I try to record from the microphone, it will not work until I plug in an external mic first, then unplug it. However, if I do the hack to unlock the wave-out as a recording device and install that driver, my internal microphone will work without plugging in and unplugging an external one. The problem is that now upon every restart of the system, I get an error message stating that the SoundMax HD driver failed to load. However, when I reinstall KB888111, which enables the HD audio bus, it works again until the next time I restart the sytsem. The whole audio driver set is now totally shot .... can someone point me out to a fix?
On another note, I recall that the installation of the audio driver was paired with the modem driver as well. I currently have the modem disabled since I don't use it. Does disabling the modem have any impact on the system?
Message Edited by singularity2006 on 02-18-2008 04:55 PM
T61_Wide | Model No. 7662 - CTO
Core 2 Duo T7250 | 2GB OCZ DDR2-800
82566MM Gigabit | 4965AGN Centrino Pro

Similar Messages

Support for Apache Drill ODBC driver

Hi,
Any plans to support for Apache Drill ODBC driver?
Thanks,
Kam

I would appreciate it if you would direct me to some information on the fact that 8i does not support the OpenLink ODBC driver.
Thanks

Does OS 9 have built in support for external Iomega Zip drives?

Hi,
Does OS 9.x have built-in support for external SCSI Iomega Zip drives?

Yeah, you are correct, but Iomega's drivers & APPs were one really destabilizing factor for OS9, as well as ruining a few ZIP Disks with that Death Head crash, and being a nuisance. Intech's drivers gave twice the R&W speed, never failed, never crashed, could Format & Partition them... also worked for MOs, JAZZ, SyJets, other Syquests from 44MB to 550MB, and any other drive regardless of IDE, SCSI, FW, USB.

SOLARIS OS Support for Advance Format Hard Drives

Hello,
I am fairly new to the UNIX Operating System so I'm hoping that someone can help me. Does Solaris support the new Advance Format hard drives (4k sector boundaries)? I cannot find any mention of the advance format drive in the Oracle literature. I believe, based on my recent reading that Open Source Solaris depends on ZFS to handle the support of the new 4kbyte sector size.
Thank you in advance for any information you can supply.
Steve

Moderator Action:
This post has been moved to the Solaris 10 forum.
@ O.P.,
You originally posted your inquiry to the Clustering forum, which has nothing to do with the topic of disk cluster size.
Glance at the documentation for Oracle Cluster 4.0 to see what clustering is all about.

W510 Support for SSDs using hard drive caddy?

I just bought a Crucial M4 512GB SSD and I cannot get this thing to work in the hard drive caddy. Works fine in the primary slot, but can't initialize/partition/format/anything when using it with my official Lenovo hard drive caddy. So what SSDs does the caddy support?

Ok, I feel a little dumb. I got the M4 working. In the past, I've been able to hot swap my 2nd drives. Apparently this no longer works (need to figure out why). I plugged in my old HDD while booted up and got the same "drive not initialized" error on it. After a reboot, the HDD was up and running. So tried the same with the SSD and it's working. I thought I had done this as part of my troubleshooting but I guess not :/

G5 2.3ghz DP support for 3TB as boot drive?

Hi all,
I've read mixed reports as to whether the G5's can use the newer 3TB drives as boot drives? I have box running 10.4.11 and want to fill both drive bays with 3TB drives. Don't plan on RAIDing them just want to make sure I can use one them as a boot drive.
Cheers.

OK, you can put 3 TB drives in and so long as they can throttle back to SATA-1, you will be OK there. However, there is a rub having to do with Apple Partition Map (APM).
G5 computers must boot from an APM drive. GUID will not work. Unfortunately, the largest partition size that APM will support is about 2.2 TB. Thus, to get full use of your 3TB as a boot device, you would have to partition it into at least two partitions, neither of which is greater than about 2.2 TB, using Apple Partition Map. This should be doable, but I haven't gotten a 3TB drive to try it on, so YMMV. Nonetheless, the PPC Macs can only boot from an APM disc.

Support for Iomega Zip drives?

Does OS 8 have built-in support for external Iomega Zip drives?
Does anyone know if OS 7.x does?

I don't know about System 7.5, but I have a PowerMac 6500/300 that came with both System 7.6.1 and an internal ZIP drive. I think you do need to download some drivers from Iomega to get it to work however. I do know that when I tried a clean install of OS 8 some years back, I couldn't use the ZIP drive. I think I also had to upgrade the ZIP drivers at some point, but I can't remember if it was when I upgraded to OS 8, applied the 8.1 patch, or upgraded to 8.5 and applied the 8.6 patch.
All I know is that you can use both the internal and the external ZIP drives with 7.6.1 if you download a driver from Iomega. Weather or not you can still do so is another issue. I could extract them from the RestoreCD, but it wouldn't have an installer.

Looking for a soundmax that supports my computer hardware...

Like the title says, I turned on my computer this morning and a message popped out that my Soundmax didn't load properly and needed to reinstall it. So I go to unistall a program in control panel and in my lack of knowledge in computers made me uninstall it(I should have rolled it back in device manager maybe...). Then after restarting, I don't have the soundmax installer in unistall a program and I have been desperately looking for a working one but all I got was errors saying it doesn't support my computer hardware even though it was made for my computer though. Anyone know how to get back Soundmax? And no I don't have a recovery partition...
I'm using HP Compaq dc7900 Small Form Factor Windows Vista Business 32-bit
This question was solved.
View Solution.

Have you tried this one?
http://drivers.softpedia.com/get/SOUND-CARD/OTHER-SOUNDCARDS/HP-ADI-SoundMAX-Audio-Driver-61015880-6...
*** Say 'Thanks' with Kudos ***

Why No Support For HP hd7500s Personal Media Drive?

I have a Personal Media Drive hd7500s (750 gb), installed in the equipment bay, that my HP Pavillion has stopped recognizing. There is power to the drive as indicated by the lights on the front. General Troubleshooting info at this site suggests I attempt to hook it up as an external drive, using the USB connection. Before I can, however, the USB port on the back of the personal media drive appears to have a plastic protective cap on the USB contacts; but I am wary of using any more plier force than I've already applied to remove this unsuccessfully. So I went to this site looking for tech data on my drive.
No matter how many different ways I enter the SKU, the model number, even the serial number of this HP Personal Media Drive, the search returns nothing. What gives??

Apparently HP does not offer support for this device. Seems pretty bad as I purchased mine about a year ago and if I had known HP was not going to support it I would not have purchased it....SUPRISE, I guess that is why they did not tell me!!!

S205 :Sad with Lenovo Driver support for Win 8

Sorry for my bad english, but I need to tell you my frustrating experience.
Due to low cost new windows 8 OS 64bit, I buy a lincense for mine Lenovo S205, conforted with some new Driver updated for 8 on Lenovo site.
I saw something strange in the Driver's page for ex. the wireless driver is called Cybertan\LiteOn and we have a Ralink RT 3090 wifi module.(or in some market Atheros AR9285)... Hummm realy strange.
I cross my fingers, I pray god and I start downloadin ALL the driver and start upgrading my system.
At restart I have my new Win8 64bit system and thank of god the most important driver (Ralink wifi) was autodetected and recognized by Win8 whitout install the strange Cybertan\LiteOn from Lenovo that doubt was working in a ralink device.
But at this point strarts the big issues with the unrecognized devices, that tahnks of god were less than expected but drivers fron Lenovo site were all wrong !!!!! Yes wrong, it seems a joke but was the true,
I think,(to tell the true I'm sure) no one from Lenovo tech checked the drivers in a S205 models, and I can explain why with the above sad experience:
- SOUND: windows only install generic HD drivers and the sound quality as expected was crappy. So I try the lenovo driver Conexant but it does not properly work, SmatAudio icon in the ControlPannel was not present, no conexant pannel to manage sound, and nothing changed, windows continue with is own generym Microsoft HD drivers. I remeber that Lenovo model U300S and U300E have the same soundcard I dowload their Conexant Win8 driver (with a different number so I hope it was teh latest) and my idea was great, the Conexant U300 driver works on my S205 lenovo and Win8 detect the conexant soundcard and SmartAudio is present and working. There is only a isse concerning SRS Sound that is present on my system but if I try to lounch nothing appens, so I think is not correctly working. But so far so god sound is better than before with generic MS drivers, but to do so I have to choose a different driver from a different Lenovo pc, not an easy step for a normal user.
- OSD: on screen display (FN+F keys) in 7 they was insert in the Lenovo Energy Mnagement, so to works you need to instal it. I make the same in win 8 with the new Lenovo Energy Management provides by Lenovo site, Lenovo Energy Management is working but OSD no !!!!
Windows 8 detect and show you in autonomy soud level and brightnes when you press FN+Arrow keys ant that are the most important but ALL the FN+F Keys are not showed on screen even if probably they are working (for ex. Fn+F6 correctly enabel1disable touchpad) but not icon showen on screen !! Well I can leave without OSD but once again seems Lenovo don't try EnergyManagement on a Win8 pc.
- CARD READER: Windows detect and unknow device called USB CRW and I though correctly was the card reader, in fact I try a sd and win8 was not able to read it. So I install the Realtek CardReader downloaded from Lenovo site, It was extracted and installed but I don't know why the driver seems bugged, the pattern contains only some icon but not exe ord driver, in fact the Card reader even if I try the driver more times it was not decetced. I tryed the old Windows 7 driver for my S205 and thank of god it was working and now my cardreader is detected and working. Once angain the win8 driver provided by Lenovo fails and I need the oldest win 7 driver that maks the job.
- TOUCHPAD: Synaptics touchpad was detected by windows 8 but all the basic features as the scrolling or 2 fingers was not working. So I try the Synaptics drivers provided by Lenovo and it was only for 32bit system even if is clearly showed as 32 and 64bit driver. The driver itself promp me that is not working on a 64bit system and i need to contact the producer :-(
Hahahaha very hilarious so I have to download the driver from Synaptics server that is so slow that I need 2 hours to finaly have my touchpad driver. Once again an epic fail from lenovo site.
CONCLUSION: Lenovo is the new n.1 pc producer in the world but it seems realy not professional when check his drivers and public it on the website. Could be s205 is the cheapest and not business line notebook but ... I am realy sad whit the way Lenovo put new drivers without any preventive control in the homesite driver's page.
It seems it was a lottery, extracting a number and put the corresponding driver on the S205 drivers page :-(
Sir this is not the good behaviour, is the bast way to loose users !!!! Very disappointed, very sad and I hope this post can help S205 users taht want use the new Windows 8 system to catch the correct solutions
I hope too some Lenovo developers can read this, try win8 on a s205 notebook and solve all the problems, because even if I solve with my 20 years pc experience all the issue, still remais some problems as SRS Sound seems not working (if It can work on our system, but if it can't why put in on our s205 driver too) and no OSD for every FN keys working.
There are not present some utility for win 8 as for example the CAPSLOCK keys utility that was present for 7 but not for 8 (I have to try if the older work on 8) or the Lenovo OneKey that seems not ready for 8..
So far so good winodws 8 works great on S205 and is a good choice if you catch the correct drivers as I explain here.
Hoping this help Lenovo not making the same mistakes in the future, and learn from their errors.
Once angain sorry for my language mistake but I'm not English
Hore this post can help in some case
Bye

Hi Romagnolo1973!
Thank you for posting all the things you learned, and how you got your S205 working with Windows 8! Hopefully this will help others.
To be fair to Lenovo, they list Windows 8 as not supported on the S205.
http://download.lenovo.com/express/WIN8-INDEX.html
As you found, it is sometimes possible to work around the problems and get things working to your satisfaction!
I don't work for Lenovo. I'm a crazy volunteer!

Printer Driver Support for Computers Running Windows 8 Release Preview

Printer driver support for computers running Windows 8 Release Preview
HP is working to help customers have the best experience with HP printers connected to PCs running the final release of Windows 8. The pre-release time is a development period when HP develops and tests printer driver solutions. HP’s current plan is for Windows 8 compatible printers to be available when the new operating system is released to the public. HP is working with Microsoft to include drivers in the Windows 8 operating system for HP printers introduced in recent years.
There may be a variety of sources for a printer driver/solution for your HP printer on a computer running Windows 8 Release Preview.
inOS:
An in-Operating System (inOS) driver is a basic driver that is included within the operating system. You do not need to download or install any software from HP. Windows 8 Relase Preview contains several inOS drivers. If an inOS driver is available for your printer, you will have at least basic print capability with USB and Network and basic scan capability with USB only (if your printer supports scanning).
Windows Update:
There might be a more functional or more up-to-date driver available for your printer through Microsoft Windows Update. If Windows Update is enabled, then the Windows Update process activates automatically when you connect (USB and Network connections) the printer to the computer. It searches online for the most recent print driver on the Windows Update site. If the online driver is more functional than the currently installed driver in Windows 8, the computer downloads and installs this driver.
HP Supplied Printer Driver/Solutions:
Although HP does not formally support any pre-release versions of Windows Operating Systems, including Windows 8 Release Preview, we may supply some full functionality drivers* prior to the official release of Windows 8. These drivers may be supplied as a courtesy to our valued HP customers through this Support Forum, though no formal support will be available otherwise. We welcome feedback within these support forums. Please check back for further updates as the official release of Windows 8 approaches.
* Full feature drivers provide full product functionality, plus valuable software to help you get the most out of your printer.

Hi vireshr,
Check out the following thread.
http://h30434.www3.hp.com/t5/Windows-8-Release-Preview/How-to-Get-Your-Inkjet-Printer-Working-with-W...
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Oracle VM Server 2.2.1 - support for NTFS external drive?

Hi,
Another "newbie" question here... we have just installed Oracle VM Server 2.2.1 on a Dell box and now we want to install some Template VM's that we downloaded. The problem is - they are on an external Hard Drive that is an NTFS drive.
So - when we connect the drive it's detected ok - but we can't mount it as the NTFS filesystem support doesn't appear to be installed as standard?
If it isn't - how/where do we get NTFS support into the Kernel?
Any help appreciated.
Regards,
Bren

Hi Bren,
unfortunately as far as I know native NTFS support is in RHEL/OEL 5.4. And since Oracle VM is based on OEL 5.3 there is no direct support for NTFS.
However there is an "unofficial" and probably not supported possibility to install FUSE and get NTFS3g to get what you want:
Point the yum update server to OVS 2.2.1 and OEL 5.3 (on which OVS is based) on public-yum.oracle.com:
# vi /etc/yum.repos.d/public-yum-el5.repo
[el5_u3_base]
name=Enterprise Linux $releasever U3 - $basearch - base
baseurl=http://public-yum.oracle.com/repo/EnterpriseLinux/EL5/3/base/$basearch/
gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-el5
gpgcheck=1
enabled=1
[ovm22_2.2.1_base]
name=OracleVM 2 - 2.2.1 - $basearch - base
baseurl=http://public-yum.oracle.com/repo/OracleVM/OVM2/2.2.1/base/$basearch/
gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-el5
gpgcheck=1
enabled=1
Then you are able to install gcc compiler, which is needed for FUSE:
# yum install gcc
Insert the OVS Server CD or use the OVS repository from public-yum to install the develop kernel:
# yum install kernel-ovs-devel
Download the required FUSE packages and NTFS3g:
http://ntfs-3g.org
http://fuse.sourceforge.net/
# wget http://marush.com/wp-content/uploads/2009/04/ntfs-3g-200944-el5i686.rpm
# wget http://switch.dl.sourceforge.net/sourceforge/fuse/fuse-2.7.4.tar.gz
Install Fuse:
# tar -xvzf fuse-2.7.4.tar.gz
# cd fuse-2.7.4
# ./configure
# make
# make install
# modprobe fuse
# cd ..
Install NTFS3g:
# rpm -Uvh ntfs-3g-200944-el5i686.rpm
Then you should be able to mount the ntfs filesystem:
# mkdir /ntfs
# echo "/dev/sda3 /ntfs ntfs-3g defaults 0 0" >> /etc/fstab
# mount -a
Note however, that this probably is not supported.
So mounting the drive on a windows computer and copying the files via. pscp might probably be the easier and supported way...
Regards
Sebastian

How does a customer request new Driver support for BOE XI 3.1?

Hello:
I would like to know the process to request product enhancements/feature support?
We are running BOE XI 3.1 on HPUX-IA64 going to Neoview 2.4.
I would like to know how to request support for the HP Neoview JDBC driver.
What is the process?
Currently as of SP3 the platform support doc only has HP ODBC 2.4 listed.
Thanks,
Dwayneat

Hi,
Raise a ticket with SAP support.
-Gokul.

Native error code -2147217887 0x80040e21 Microsoft OLE DB Provider for ODBC Drivers: ODBC driver does not support the requested properties.

I configured MySQL in TestStand and making a query in TestStand like this:
Command :=> "SELECT * FROM crc_table ; " or "SELECT CRC_Value FROM crc_table ; " returns the total number of records without any errors.
But when I add the "where" clause
"SELECT crc_table.CRC_Value FROM crc_table where crc_table.File_ID= Locals.File_ID and crc_table.Version_ID = Locals.Version_ID and crc_table.Link_ID = Locals.Link_ID; "
I get the error as:
Error, The following SQL command failed: 'SELECT crc_table.CRC_Value FROM crc_table where crc_table.File_ID= Locals.File_ID and crc_table.Version_ID = Locals.Version_ID and crc_table.Link_ID = Locals.Link_ID; ...' Native error code -2147217887 0x80040e21 Microsoft OLE DB Provider for ODBC Drivers: ODBC driver does not support the requested properties. [Error Code: -10, User-defined error code.]
I tried the same syntax in MySQL Query Browser and got the correct result:
SELECT crc_table.CRC_Value FROM crc_table where crc_table.File_ID= "FID1" and crc_table.Version_ID = "VID1" and crc_table.Link_ID = "L1";
I would appreciate your help.
Thank you,
Vidula

Vidula,
I am not completely sure if this is the cause of the error but it is something that will cause problems if it is not fixed. In your SQL statement you must properly concatenate your strings with your variables. In the statement you posted you were simply putting the variable names in the string, not actually pulling their values. To do so properly your query should look something like this:
"SELECT crc_table.CRC_Value FROM crc_table where crc_table.File_ID='"+Locals.File_ID+"' and crc_table.Version_ID = '"+ Locals.Version_ID+"' and crc_table.Link_ID = '"+Locals.Link_ID+"' ;"
This way we are using the values of the variables in conjunction with the text strings. In this case the usage of single quotes (') casts the variables as strings so you may need to change this character sequence, but from the second example you gave I think that your variables are of type string so this should work fine.
Message Edited by herosphro on 04-01-2008 03:52 PM
John B.
Applications Engineer
National Instruments

LabVIEW RT driver support for CEI-620?

Hi All,
I am using PXI-8106 to run heavy-duty communication and one chasis holds the CEI-620 card (third party ARINC429 card from GE, formerly Condor Engineering). Currently on the PXI controller only runs LabVIEW RT (Pharlap) since I did not want to install Windows OS to slow the performance. Now here it is the problem, GE does not provide LabVIEW RT driver support for CEI-620 (they do have LabVIEW RT support for CEI-830 though, but that card is PMC interface). Basically right now MAX can not recognize the CEI-620 card on the host side, and I can not deploy my ARINC429 application VI to the target PXI controller. I am wondering anybody here has encountered the same problem and develop the LabVIEW RT driver for CEI-620 on his own?
Thanks.
Martin Ding
Senior Project Engineer
S-TEC Corporation

Hi,
Unfortunately I don't have much more information to offer. I would suggest checking to make sure you have all the correct device information whe you create the ini file. I think you should still be able to develop a driver for a poll based device. It should be easier to generate an ini file if you do not require interrupt information. Make sure you have the correct identification information and try using the VISA Driver Development Wizard again.
Eric A.
National Instruments
Distributed I/O Product Support Engineer

HDCP support for T60p Soundmax HD driver

Similar Messages

Maybe you are looking for