HDD and RAM Upgrade Questions...

I am thinking about upgrading my HDD and memory. My computer is a Qosmio X870-BT3G23. HDD is about 1TB and also have 12GB RAM. I am not sure how to upgrade my RAM as I heard the other 2 memory slots are not user accessable. How would I go about upgrading HDD and transfer all my stuff over? I think my computer has slots for 2 HDDs, but not sure... Thoughts on both HDD and RAM upgrade appreciated 
Qosmio X870-BT3G23

Skeet, here are the SPECIFICATIONS for your machine if you have not seen them.  And on pages 44-53 of your User's Guide is a very thorough description of the adding memory process. As far as transferring files are concerned, at the Start screen, type Easy Transfer, hit Enter and follow instructions.
The specifications indicate you can have 16GB memory in the two accessible memory slots without concerning yourself about the 2 hidden slots. I personally can't imagine why anyone could need more than 16GB memory and 1TB HDD but, of course, that's your call.
C.B.
Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

Similar Messages

  • MacBook 7,1 HDD and RAM upgrade advice and brand recommendations

    Question
    I'm upgrading a MacBook 7,1 from it's original HDD and RAM and I'm wanting to get ideally 8 GB RAM (2x4GB RAM) and a 1TB@7200RPM HDD. What brands do people recommend?
    Reasoning
    I now need to do a lot more video editing on this MacBook (FCPX, Motion 5, Compressor 4) and don't have the money now to get a new MacBook Pro, especially considering my current MacBook has only been in use for 1.5 years.
    Also, If anyone has a better suggestion than upgrading my HDD and RAM, or doesn't think these upgrades will function well with my MacBook, please tell me.
    MacBook 7,1 original specs
    2.4GHz Intel Core 2 Duo Processor
    2GB 1067 MHz DDR3 Memory @ 5400 RPM
    250 GB HDD

    Faster RAM will have a great chance to lead to problems. If it works it will not be noticeably faster; The bus speed is still 1066. Ram being cheap I would either put in more ram and not faster ram, buy from high reputation suppliers like Crucial, OWC.
    The 7200 will not lead to problems, be sure that it is compatible, the fastest way to replace if you are using (snow) leopard OS: make a clone of the existing drive to the new one, boot from it when still outside, to test;  replace the internal disk with the new one, et voila...

  • Another RAM upgrade question

    Hi everyone,
    I know there seems to be lots of RAM upgrade questions here but hey thats what forums are for.
    I'm looking to upgrade my macbook's RAM it's currently got 2GB (2x1GB)
    Is it possible to purchase 1x4GB and put that with one of my current 1GB sticks to create a total of 5GB?
    I would be interested to know if this is possible or if anyone has tried it.
    Thanks in advance
    Scott

    This will work if your MacBook is late '07 or newer.

  • Kernel Power error after Win 7 and RAM upgrade

    Hello,
    I posted earlier on the subject of win7 and ram upgrades.  I did both and it seemed to go fine.  I did the ram first ... replaced a 667Mhz 1gb with a 800Mhz 2gb.  A couple of days later the computer just shut itself down and restarted.  Since then it has done it another 5 times, seemingly at random.  Yesterday I decided to spend some time looking into it and found the 'event log'.  All the shutdowns are recorded as 'critical'.  A search on the web/here showed other occurences of the fault associated with drivers as much as anything.
    After I did the win update I did update almost every driver with ones from this site.
    Other than the shutdowns the only issues I have which are of very mild concern are the length of time the fingerprint reader takes to be present and that occasionally the cursor is unavailable for about a minute after logging on. When you try and control it it jumps about anywhere but where you want it to go.   I rolled back the alps driver and that seems to have sorted the cursor issue.
    So, details of the shutdown from the event log are as follows.
    Log Name:      System
    Source:        Microsoft-Windows-Kernel-Power
    Date:          16/01/2011 16:21:31
    Event ID:      41
    Task Category: (63)
    Level:         Critical
    Keywords:      (2)
    User:          SYSTEM
    Computer:      (removed by me)
    Description:
    The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."
    There's more (I've shown it all below) but it's not that important.  When I looked into it I found details of the problem on the microsoft knowledge base.  Its described here http://support.microsoft.com/kb/2028504.
    I believe I fit into scenario 3 for cause and resolution.
    So, it seems that win7 and mixed speed ram may be a problem on some computers ... probably only a tiny number, but it looks like the HP3507 is one of them.  I did see somewhere that I could down speed from 667 to 266 which might help with memory compatability but I can't see anywhere on the the insydeH20 bios where to do it.  BIOS is version F18 .... upgraded from F15 as part of the Win7/RAM ugrade.  
    Before I swap back to the 'old' memory I'll see if anybody here can come up with any ideas.  It may be that I have to sell off the expensive 2gb memory (ddr2 800mhz 200 pin) for £39.99 from maplin at a bargain price and get 2gb of 667Mhz from somewhere.
    The full 'detail' regarding the fault is below.
    Bye for now.
    Phil
    Log Name:      SystemSource:        Microsoft-Windows-Kernel-Power
    Date:          16/01/2011 16:21:31
    Event ID:      41
    Task Category: (63)
    Level:         Critical
    Keywords:      (2)
    User:          SYSTEM
    Computer:      (removed by me)
    Description:
    The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
        <EventID>41</EventID>
        <Version>2</Version>
        <Level>1</Level>
        <Task>63</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8000000000000002</Keywords>
        <TimeCreated SystemTime="2011-01-16T16:21:31.187617000Z" />
        <EventRecordID>194889</EventRecordID>
        <Correlation />
        <Execution ProcessID="4" ThreadID="8" />
        <Channel>System</Channel>
        <Computer>Home_Laptop</Computer>
        <Security UserID="S-1-5-18" />
      </System>
      <EventData>
        <Data Name="BugcheckCode">0</Data>
        <Data Name="BugcheckParameter1">0x0</Data>
        <Data Name="BugcheckParameter2">0x0</Data>
        <Data Name="BugcheckParameter3">0x0</Data>
        <Data Name="BugcheckParameter4">0x0</Data>
        <Data Name="SleepInProgress">false</Data>
        <Data Name="PowerButtonTimestamp">0</Data>
      </EventData>
    </Event>

    Hi DWeiland and Schwede,
    Thanks for your replies. Yes I did the runtime engine registry change and also mass compiled the LV7.1 folder and my sourcecode. I still see the problem as I have set the LV adapter as Lv 7.1.1 runtime engine. Now I have changed it to LV7.1 development system. With this setting, it is not giving any error. Thus I don’t see any problem now. The older version of the code had the adapter as the runtime engine for some reason, now I have changed the setting to the development system. I hope that it shouldn’t be a problem.
    Thanks again!
    Thank you,
    Sasi

  • HDD/RAM upgrade question - 400 mhz sawtooth

    Hello!
    My Sister has a Sawtooth G4 - Well, I believe it's a sawtooth anyway. I don't know for sure, so I'll post a bunch of specs:
    It's a 400mhz model, early 2000. It shipped with a 10GB HDD, and 128 RAM. I believe it also has a 100 Mbps Ethernet. It has a DVI and VGA monitor video card, but i'm not sure the Video RAM level. It has an internal FW 400 port as well. The internal Airport card is shot - er, maybe the extension.
    It has major issues with the system - and it seems to stem from a botched OS 9.2 install. It's running 9.1, but with trouble. For one, I can't open the extension manager. For two, it's slow, and acts funny.
    Well, I thought i'd be nice, and try to get the G4 working for my Sister. It seems that it may require an Clean install of OS 9.0. Oh well, I can do that easily enough. However, before I go through all that trouble, I'm contemplating upgrading the hard drive (at least). With only 10GB, it's not very useful for iTunes, Photoshop, or our old OS 9 games - things she'd like to have.
    I looked at the specs for the Mac at:
    http://www.lowendmac.com/ppc/g4saw.shtml
    It takes an 3.5 inch Ultra ATA drive? I've seen those around - and a 60GB drive or so is becoming pretty cheap. (I've seen 80G for under $50) I just figured i'd ask if anyone has tips on what to buy, how to install it, and Particularly if I need any special adapters for the G4. It does have a slot for a second internal HDD. I've also heard that a fast, second internal HDD can overheat the computer - is this a common issue I should be worried about?
    The same questions go for the RAM. I'd like to add at least an extra 128MB, but I'm not entirely sure what to get. The above site mentions that it uses PC100 SDRAM in DIMM mode? Hmmm... I'll have to look around.
    Please excuse any silly questions, I'm just far more familiar with more current systems, and it's 1 AM
    Thanks,
    Dan
    PS: It looks to have a slot for a floppy drive under the DVD-ROM drive. I have a bunch of files on our OLD PowerBook 5300 that i'd like to move - but I need a floppy drive. Our old external USB floppy drive is.... very dead. The external floppy drives i've seen at stores seem to be pretty expensive, but internal drives are still fairly cheap (some under $30). How hard would it be to find/buy/install a compatible floppy drive? What format would it need to be? If such an upgrade runs over the $40-50 that a new USB drive costs, it's not really worth it.
    15" Powerbook G4 (May 2005 ed), iMac DV (9.2.2)   Mac OS X (10.4.6)   1G Ram, 192 (iMac)

    Wow, thanks again!
    I figured out that this is the AGP graphics Sawtooth - not the Yikes model. Where do these names come from?
    As per upgrading to OS X - we have a G5 which she can use, and a XP box - which is down with the flu for the third (or fourth?) time. Therefore, the G4 will stay OS 9. She just wants to have a reliable machine that can play DVDs and music, and play some of our old OS 9 games. It's not intended to run any new programs, just the old ones that she can't run now. When I mentioned photoshop - it's a "Limited edition" of version 5.0 - and it's far, far, FAR more reliable on the G4 than on our 2-year-old XP box, despite the G4 running 9.1 with a wimpy 128 meg ram!
    The main reason for upgrading the HDD was to make it more practical for games and MP3s - via iTunes 2! It won't play AAC, but it plays MP3s fine. She has at least 8 Gig of music - too much for a 10G drive! (Even half of it leaves precious little expansion room)
    I'm watching for a "small" HDD - it seems that our local Fry's is no longer selling anything smaller than 100G - which was $100! Or perhaps they were just sold out at the time. I'll keep an eye out for another sale. In fact, asking my friend for an old drive is a good idea. They have parts from at least a dozen old windows and linux boxes floating around - so they likely have a drive or two. If it's a used HDD, loaded with Windows (probably 95-2000), will it confuse the system before re-formatting?
    As per RAM:
    I'm quite aware of the lack of RAM. However, I'll have to watch for sales! I'm not aware of any "Mom and Pop" stores close by, although that's a fantastic idea. A PC 133 128 MB card runs $40-50 at the local computer stores, but only $15 at OWC! Therefore, if I don't find suitable RAM locally, I'll order some. I wouldn't mind an extra 256 (or 512) for my iMac either.
    Speaking of iMac - I've determined that it's the iMac DV Special ED from March 2000. (400mhz, originally 13 Gig Drive - now 60, 9.2.2) The question is whether or not it maxes out at 512 MB or 1 GB of RAM. One of the Apple support sites I found ( http://docs.info.apple.com/article.html?artnum=58007 ) said that the slot loading iMacs max out at 512. It makes no distinction between any slot loading iMac. However at http://www.lowendmac.com/imacs/dvse.shtml, it mentions that this model specifically can accept 1 gig of RAM. I'll assume that the Apple article is correct, but I'd love to get a full 650 MB if I can! (I'd love to add a 512 to the 128 I have now)
    It's amazing, really - after 4 years of constant use, a hard drive motor failure (hence the 60G HDD), and a year and a half burried on a desk, the iMac is becoming more handy by the day. It's good at capturing the Video and audio from say, Halo, while my PB's too busy to run anything else (via S-Video and audio through our DV cam). It makes a great DVD player, an iTunes Jukebox, and game machine - most of my games are still OS 9. To top it off, it makes a great wireless base-station for my Nintendo DS at school, where there's no WiFi! With 30 gig of space left on the HDD, it has plenty of room for whatever I want to do with it. Guess you can "teach and old dog new tricks!'
    Well, I guess this means my question is answered for now - once I find the things I need, i may have some more questions, Thanks again!
    -Dan

  • Questions regarding Hard Drive and RAM upgrade

    I just purchased a Macbook white (Late 2006 model) for my son off ebay. I know next to nothing about hard drives and RAM.
    I only paid $400 for this thing so I'm willing to put some extra cash into it.
    What is the maximum hard drive I can put in this thing? Also, does the size of the hard drive depend on the amount of RAM I can put in it?
    Like I said, I dont know very much about this stuff at all. Could someone please give me specific examples of the size hard drive & RAM I can put in.
    Thank you.

    Replacing the Hard Drive and RAM is very easy. Apple has a PDF file with instructions for replacing a hard drive and RAM. You'll need a #0 phillips screwdriver for the "L" bracket and a Torx 6 driver for the caddy screws.
    http://manuals.info.apple.com/en/MacBook13inch_HardDriveDIY.pdf
    http://manuals.info.apple.com/enUS/MacBook_13inch_MemoryDIY.pdf

  • HP 530 notebook PC - hard drive and RAM upgrade

    Hello, I'm using HP 530 and I want to upgrade it's hard drive.
    In documentation specified that my notebook supports only 80/120Gb hard drives and up to 2Gb RAM.
    Is it true? Can't i use more capacious HDD or RAM.
    And what type of HDD i should by? Is it compatible with SATA2 2,5" drives?
    I have model with Intel 945GME chipset (p/n ke666aa#acb)
    PS: sorry for bad english
    UPD:
    Thank you very much for answers!
    Yesterday I plugged 2Gb RAM module and with existing 1Gb module I get 3Gb RAM and it works fine.
    Also I replaced my hard drive with SATA2 500Gb 7200rpm drive and it wotks fine too!
    This question was solved.
    View Solution.

    >> Is there any real limitations of HDD size for my HP 530?
    No, you can bet bigger HDD for (it uses SATA HDD)
    BH
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • RAM upgrade questions.

    Hey guys. This is my first thread, and quite honest, I'm not sure if I'm at the right place at all.
    Oh, well.
    I'm a proud owner of an (maybe older model) MSI GE60 2OC.
    It came with:
    Intel i5-4200M 2.5 GHz
    6GB ram
    GeForce GT 750M 2GB
    500GB hard drive
    - and some other cool stuff! :D
    However, I find my computer quite slow. And the "only" things I could "blame" would be my ram and perhaps my hard drive.
    So, I was wondering if it's possible for me to upgrade my current 6GB to 8GB (or more?) and if so, how is that done? (Thinking about finding the proper ram kit).
    And also, while at it, I'm sure it would also help getting a SSD?
    Sorry for the confusing questions - but I hope you guys can help me out :-)
    Thanks in advance!

    Upgrading the RAM is fairly simple. It can take up to 16GB (2 x 8GB) of DDR3-1600 or DDR3-1866 Unbuffered NON-ECC 1.35V modules. To install, you'll have to remove the back plate of the laptop (there will probably be a warranty sticker that you'll have to break to do so) and swap out the RAM that is installed.
    As for the SSD, the GE60 will have a 2.5" HDD installed, and it should have an open slot for an mSATA SSD as well. You could either replace the HDD with a 2.5" SSD, or just add in an mSATA SSD. You'll need a cloning utility (such as Acronis True Image) to clone your current HDD to the new SSD, so you can retain all of your data and the recovery partition.
    If you want to replace the HDD with a 2.5" SSD, you'll need to make a full disk image of the drive, restore it to the SSD, then swap the drives.
    If you want to add in an mSATA SSD, I would recommend cloning your OS partition to the mSATA to use as your boot drive, then format the OS partition of the HDD and use that partition for data storage. Just be sure to leave the recovery partition intact on the HDD. If you don't need to clone your current OS partition and you're okay with having a clean slate, you should be able to run the recovery from the HDD and reinstall the OS to the mSATA.

  • HDD and memory upgrade on Satellite A350

    Hi All
    I have a satellite a350 laptop can anyone tell me whats the biggest harddrive I can have and memory please
    Thanks

    Hi
    The RAM upgrade depends on the available chipset.
    Not quite sure about your A350-xxx model but many of the Sat A350 notebooks were quipped with an Intel GM45 Express chipset and in such case you could upgrade the memory max up to 8GB RAM
    Regarding the HDD: This notebook supports SATA HDD. This mean that you are not limited to an special size.
    Theoretically it could be possible to use 500GB, 750GB 2.5 SATA HDDs

  • Hard Drive and RAM upgrades for latest 15" MBP

    I'm minutes from ordering a new MBP. Only concerns are whether I get hte Apple upgrades or shop around.
    I like this Hard Drive...
    http://www.compu2000.com/index.php?l=product_detail&p=6433
    And this RAM upgrade...
    http://www.a-power.com/product-10937-311-4
    If these are equivalent to the apple options I can save hundreds and get a 320 GB drive, which will make a great portable.
    So, does my plan hold water?

    You're on your own for support when you do your own upgrades like this, but generally speaking, it works fine.
    Note that HDD is less risky than RAM. With RAM you run the risk of unstable behavior that is tougher to diagnose. That said, a quality RAM upgrade and some initial testing with any of many available tools is as good as a factory build.
    HDD upgrades are less risky, and I've upgraded (well, replaced after HDD death) ones in my MBPs many many times. I crunch my hard drives more than normal and have to generally replace them about every year. Some of the MBPs don't make this easy, and prepare to get all sorts of cozy with little 0 and 1 sized Phillips screwdrivers and some T6 as well, but it is doable (just not quite for the truly faint of heart).
    Again, you're on your own for support once you do this, so weigh that in your decision.

  • Basic RAM upgrade question

    Hi,
    I've read a lot of threads on ram upgrades, but still have a very basic question. I want to buy the $599 Mac Mini, which comes with 1G RAM. Clearly, the Mac RAM is overpriced, but I've been told by a friend to upgrade to at least 2G for $50 extra. I realize Crucial and others sell it cheaper, but I don't know about my ability to put it in.
    Is it worth another $100 to go from 2G to 4G. Will I see a noticeable performance increase if I'm using iMovie, Photoshop or Final Cut Express? Or surfing? Are we talking about a few extra seconds when rendering video but no other noticeable effects? I plan to keep this machine for our family machine now that my child is using iWeb.
    I'm sorry if this has been answered, but I'm on a very tight budget and worried about my job in this economy. Thanks for your help.

    If you are on a tight budget and have any concern about on-going warranty support for a new mini, then it is a better proposition to buy the $50 upgrade to 2Gb from Apple than to do the RAM upgrade yourself and go to 4Gb for little more. It's not that the upgrade is particularly difficult because it isn't, but if you are not reasonably confident in your skills and something goes wrong, Apple could declare the warranty void due to the work you've done on the inside of the system.
    There is a notable performance gain to be had from 4Gb as opposed to 2Gb, but much of the difference is less than obvious, particularly if you are careful about what apps you have running at any time. Running Photoshop, for example, would cause the system to slow down if you then launch another major app such as iMovie, but running it alone in 2Gb RAM would give you respectable performance. Final Cut Express isn't particularly demanding on the system so should run well, as would the vast majority of Intel-native applications. It's only if you are running any non-native processes (applications, drivers etc) that 2Gb would prove notably limiting.
    If it were me, I'd probably opt for the base model, buy 4Gb RAM from Crucial and do the upgrade myself. Next choice would be the base model, buy the RAM from Crucial and have a local Apple Approved Service Provider do the work for me - some AASPs charge a reasonable fee for this. Third choice would be to buy the base model with Apple-supplied 2Gb RAM and then at a later time replace that with 4Gb from Crucial as and when funds and circumstances reasonably permit it.

  • Some RAM upgrade questions

    I have an Imac which i purchaswed in Nov. 2007 with 1 gb of RAM. Am looking to add more ram and have the following questions:
    I am thinking of adding another 2 to give me a total of 3. Would this work.
    Does the ram have to exactly match (manufacturer) of my original Apple ram.
    I see ram from OWC, crucial, Ramjet, etc. Any positive or negative experiences?
    I am looking at getting 2 gb of ram from crucial and adding it myself.
    thoughts??
    THANX

    I see ram from OWC, crucial, Ramjet, etc. Any positive or negative experiences?
    I am looking at getting 2 gb of ram from crucial and adding it myself.
    thoughts??
    I did exactly the same thing as you: I purchased my iMac online in November 2007, with the minimum amount of RAM installed so that I could do my own RAM upgrade later. I then ordered 1 GB of RAM from Crucial, and I must say that their prices are superb, not to mention their excellent service and speedy shipping. Because I live in Canada, I had to pay customs duty, but the final price was STILL much less expensive than any other Canadian RAM dealer, let alone the astronomical prices on Apple's web site! In my humble opinion, Crucial is highly recommended.

  • Desktop RAM upgrade questions

    Hi, I have hp elite m9000t series desktop with 2 GB(1 x 1GB) ram and as per the specs and research in hp website it can support to 8gb. RAM is of DDR2-SDRAM (pc2-5300 / 667 MHZ) type. I have 2 more slots open, so guess that can add 4gb(2 x 2gb) of ram. Question is 1) do i need to buy the sam ddr2 667 mhz ram or can i go to higher speed models? 2) is it compatible to have 2 slots with 1 gb  each and another 2 slots with 2gb ram each? 3)what is the recomended RAM for window7 better peformance? i am planning to install VMware to do other OS like linux, etc.. given that i may need more RAM. Please suggest me on the memory upgrade..I am seriously looking towards windows7 release date, i am very much disappointed with vista, cant wait for windows 7.
    btw, i am planning to upgrade to 64bit windows 7 professional, currently i am running with home premium 32bit.

    It's best to install RAM which is just like the one you have right now, i.e. pc2-5300 / 667 MHZ. In fact, I would recommend using RAM from the same manufacturer as the one that is currently installed. Each slot should have the same amount of RAM. So I suggest you use 1+1 or 2+2 rather than 1+2. Since you'll be using VMWare(hope your processor supports Virtualization), I suggest you go for 2+2.
    Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"
    I am an ex-HP Employee.

  • Lenovo Yoga 11s SSD and RAM Upgrade - Great Results

    Picked up a Lenovo Yoga 11s from Best Buy.  I chose Best Buy for price, color, and processor.  They had a slightly better deal than Lenovo.com.  The clementine color looks great.  Quality is great.  I'm very happy with the purchase.  It has the i5 processor, 4GB RAM, 128GB SSD.
    I upgraded the SSD and RAM and found the upgrade relatively easy.  Here is a basic step by step and results.  (note the parts I chose increased the cost by close to $400.  I chose these parts based on quality, performance, and power usage.  There are cheaper alternatives, but I wanted an upgrade and money was not my concern.)
    Upgraded Parts
    RAM - Patriot Memory 8GB PC3-12800 1600MHZ CL11 1.35V - Purchased at Newegg, but could have saved a couple dollars on Amazon.
    I chose this part based on previous experience with Patriot and the low voltage RAM.  A lot of the RAM is higher voltage and I wanted to make sure I reduced heat and power usage.  When you look for 1.35V RAM, there are not a lot of options...
    MSata SSD Drive - Intel SSD 525 Series 240GB Drive
    Intel SSD Page
    I purchased through Newegg
    I chose the Intel drive based on previous experience with Intel.  They cost more, but I've found their performance to be good and reliability good.  There is also a good review on this drive on Tomshardware Tomshardware Intel 525 Review.  Toms review shows top performing drive and low power.  I also looked at many other manufacturers and Intel had the lower power consumption.  This means less heat and longer battery life.
    Cloning Software
    Intel provides a free cloning software from Acronis
    My Digital SSD MSata external case
    I purchased through Newegg.  
    Nice quality device.  I used this to help in cloning the OEM SSD to the new Intel drive.
    T5 Torx Screw Driver
    I purchased this from Home Depot T5 Torx Home Depot
    I read all the reviews, posts and issues around cloning the Win8 SSD drives.  Many people have/had issues.  I was prepared for problems.  Another reason I chose Intel, as they have migration software that I felt would be top notch.
    You need to have the Hardware Manual handy.  I read how to remove keyboard and top cover.  This is required to upgrade RAM and SSD.  It was very easy.  Take your time.  Note, this is very different than the Yoga 13 youtube video for part removal.  I think it's easier.  Here is the link to download manual Yoga 11s Hardware Manual.
    How to clone your SSD
    I expect if you're doing this project you can learn how to use the Intel software for cloning.  Read the web, watch their youtube video.  Read the manual...
    Remove your factory SSD and insert new Intel SSD (note, you must insert Intel drive in notebook for cloning.  Do not try and clone on the USB external drive.  Intel software will not detect drive properly).  Create a bootable version of the Intel software on a USB drive.  Install your factory OEM SSD in the external MSata SSD drive.  Go to BIOS and set boot to support legacy, no fast boot, boot to USB.  
    Boot to the Intel Acronis app on the USB drive.  Then connect your OEM SSD via second USB port.
    Then follow the wizard on Intel's software.  Cloning process took less than 5 minutes.
    Unplug your USB devices, go to BIOS and set all all your boot settings back to factory UEFI, fast boot etc.
    The PC booted to windows second try.  The first time it said it has issues and went through a process to repair.  It then said it failed.  I rebooted again and it went straight to windows.  Did all my windows updates and everything is fine. 
    Performance 
    Windows Performance Improvement
    Memory - Factory score was 5.9 - Patriot Memory is 8.2 *** Nice Improvement
    Hard Drive - Factory score was 6.2 - Intel 525 Drive is 8.2 *** Nice Improvement
    This pc is crazy fast booting and shutting down.  It boots in 7 seconds.  Not sure it's really faster than OEM, but I've never seen a pc boot this fast.
    Over all performance is fast.  I installed Office 2010 pro from a USB drive in under 5 minutes.  Web browsing is crazy fast.  I'm super impressed with the speed of this pc.  Much faster than I expected.
    Size, Shape, Weight, color is great.  Performance is great.  Happy with upgrades and quality of parts.  May be my best notebook purchase to date.  I don't have any battery life numbers to report yet.  Everything is new and I haven't really spent much time off the charger.
    Issues I've experienced during this upgrade of parts
    I first tried to clone the SSD drive by putting the Intel drive in the USB enclosure first.  The intel software would not work as the PC detects the external SSD drive as a SCSI drive and Intel cloning software could not identify the drive as an Intel Sata drive.  I called Intel and they had no advice or help.  I also tried a few other cloning softwares that ultimately did not work.  As a last resort I switched the drives and everything worked great.  Lesson learned, swap the drives first and use Intel software to clone.
    Factory restore - doesn't work.  Not sure why the factory restore is not working on my new Intel drive.  Windows works great!  All the partitions are there.  I suspect I messed up the OEM restore portion of the drive.  At one point I thought I had booted to the Intel drive, and tried the restore (I had about 7 failed cloning tries before the final one worked as I outlined above).  It went through the restore process and then failed.  However, what I later found was that I had actually booted to the OEM drive in the external USB case and I may have corrupted the restore functionality.
    I contacted Lenovo Support and explained I could not restore using the 1 key restore.  They walked me through some basic troubleshooting and then opted to mail me factory restore disk.  I have the disk and will keep them available for when/if I ever need to restore.
    Solved!
    Go to Solution.

    I upgraded from the Yoga 13 to the 11S and am happy to report that the machines are so identical that apparently you can just yank the SSD from one and drop it in the other. I had upgraded my 13" to 240gB SSD + 8gB RAM and simply plopped the two components into the 11S and after about 30 seconds of Windows alerting me that it was 'setting up devices' the machine booted normally and has been working perfectly since!

  • My Mid 2009 Macbook pro (Just purchased) will not turn on after hard drive change and ram upgrade

    So i purchased a mid 2009 Macbook Pro from a guy with 4 gb of ram and 250gb hard drive. It worked perfectly fine when i booted it with his hard drive and ram installed.
    I spilled beer in my old computer (late 2009 15" 500gb hard drive and 8gb ram) but took the hard drive to get tested and it worked fine. i later found out it was from a 2010.
    Like an idiot i assumed the pro i just purchased would be able to handle the same upgrades that were in my old computer so i threw in the 500gb hard drive (2010) and the 8gb of ram.
    The thing booted up fine, just a bit slow which i chalked up to my hard drive sitting unplugged for a long time.
    After about 3 minutes it crashed on me. Confused i replaced the 4gb of original ram back into it. (the 8gb ram was pny i bought from ebay so i thought it could be that) It decided not to turn on or show any lights on the front except for the battery meter.
    After this i replaced the original hard drive and still NO LUCK!! im really mad because i am in desperate need of the information on my original 500gb hard drive and im afraid i have destroyed 2 computers and about $1K worth of cash out the window.
    HELP please enlighten me on what i have done and if the situation can be fixed.

    UPDATE: Problem solved with the old hard drive in it, Now the less pressing issue:
    Will the computer run my 500gb hard drive with all my information on it? I need to forward a resume and it is on that hard drive.

Maybe you are looking for