HDD Drop - Rebooting NAS.
I have 2 WD red drives, below are the details. Model - WD30EFRX-68EUZN0 Firmware - 80.00A80 I am using them in my Qnap ts-451 nas with Raid 1 configuration, need to understand how do we capture HDD drop scenario? Can HDD Drop scenario can cause the system to reboot? As far as I am aware if it happens, it should cause problem in data accessibility or connection drop, but not the system reboot. Is any one aware of this issue happening with Qnap NAS and is WD working towards it?
Hello and welcome to the WD community.
I have not tried this, but is there a way that your NAS device can diagnose the drives inside of it ? Perhaps that way you can see what causes this issue.
Similar Messages
-
WRT160NL - Connection drops, Reboots, USB performance
WRT160NL - Connection drops, Reboots, USB performance
After reading many posts dating back several months regarding internittent connectivty drops, usb performance issues and users having to reboot there routers frequently with the WRT160NL, I was fairly convinced this is a FIRMWARE issue and not a config or hardware problem. Nevertheless after adjusting settings as per Linksys support, replacing my DSL modem, and yes RMA'ing my WRT160NL, I am still having these issues with this device which points definetly is the direction of "FIRWARE".
I'm hoping these posts are being acted on and escalated to Linksys(Cisco) so that we can get a resolution to our frustrating scenerio. I have seen post after post with similar issues and complaints. When are we going to see a FIRMWARE upgrade?Same issues, same problems. Tried all suggested configurations from this forum. WRT160NL slows down and locks up after running 12 to 24 hours. Can not access router set up page after that. Running latest fireware. Considering putting it on a timer to reboot it every 12 hours. Must be a fireware issue or the entire production run is defective and should be recalled.
-
New wrv210 issues, wifi drops, reboots
I just purchased a couple of these routers. One for home and for some business clients. So far I have only setup one at home and am kind of disappointed. I can consistently make the wifi drop by clicking to different menu items in the web config gui. In these cases, my wifi clients drop and cannot reconnect, even though the my ssid is still being broadcast by the router, but all clients on the ethernet switch can still ping the router and access the internet. A reboot is required to allow wireless clients to associate. For example, last night my browser was refreshing on the System Performance page for about 20 minutes. I clicked onto Router status and all wifi clients drop. If there is no easy solution to this I will get more technical information (packet captures of 802.11 association, wpa handshakes, etc).
In other cases, using the web interface will cause the router to reboot. I have a syslog server setup (on ethernet) but it doesn't receive anything except for URL Detections and New Connections.
I have a pretty simple setup at home, one ssid, 802.11b/g, wpa2 personal (I've tried Personal Mixed, too). The router seems to be running the latest firmware (2.0.0.11) and a recent hw revision (WRTR-221G_V01).
I am heading to a client location to setup the 2nd wrv210 now. Are these known issues? Are there any solutions?Hi,
The guys at Cisco Small Biz Support are great and RMA'd that first router. So I received the replacement yesterday and set it up. It's performing a lot better than the last one, except I get random reboots/lockups. Firmware 2.0.0.11. The remote syslog seems to work though, so I gathered some evidence last night while I was out to dinner (so network activity was idle/light, 192.168.2.1 is the wrv210 IP):
Mar 31 19:33:36 192.168.2.1 klogd: Packet type : 0 -- free socket buffer only
Mar 31 19:34:56 192.168.2.1 klogd: last message repeated 13 times
Mar 31 19:35:56 192.168.2.1 klogd: last message repeated 26 times
Mar 31 19:36:56 192.168.2.1 klogd: last message repeated 8 times
Mar 31 19:37:57 192.168.2.1 klogd: last message repeated 8 times
Mar 31 19:40:08 syslogd started: BusyBox v1.01 (2009.06.03-11:15+0000)
So a random restart while I wasn't home at 19:40 (PST), router restarts, boots, pppoe session starts (at&t adsl). I can see random iphones/wifi clients associating then the logs fill with:
Mar 31 20:17:04 192.168.2.1 klogd: Packet type : 0 -- free socket buffer only
Mar 31 20:18:07 192.168.2.1 klogd: last message repeated 36 times
Mar 31 20:19:10 192.168.2.1 klogd: last message repeated 36 times
Mar 31 20:20:11 192.168.2.1 klogd: last message repeated 18 times
Mar 31 20:21:29 192.168.2.1 klogd: last message repeated 33 times
Mar 31 20:22:29 192.168.2.1 klogd: last message repeated 30 times
Mar 31 20:23:29 192.168.2.1 klogd: last message repeated 22 times
Mar 31 20:24:29 192.168.2.1 klogd: last message repeated 18 times
Mar 31 20:25:29 192.168.2.1 klogd: last message repeated 26 times
Mar 31 20:26:29 192.168.2.1 klogd: last message repeated 22 times
Mar 31 20:27:29 192.168.2.1 klogd: last message repeated 38 times
Mar 31 20:28:29 192.168.2.1 klogd: last message repeated 16 times
Mar 31 20:29:29 192.168.2.1 klogd: last message repeated 12 times
Mar 31 20:29:41 syslogd started: BusyBox v1.01 (2009.06.03-11:15+0000)
Again it reboots, almost 50 min later.
Mar 31 21:30:46 192.168.2.1 klogd: rtl8651_user_pid set to 273
Mar 31 21:30:47 192.168.2.1 klogd: Packet type : 0 -- free socket buffer only
Mar 31 21:31:52 192.168.2.1 klogd: last message repeated 20 times
Mar 31 21:32:54 192.168.2.1 klogd: last message repeated 44 times
Mar 31 21:33:56 192.168.2.1 klogd: last message repeated 36 times
Mar 31 21:34:57 192.168.2.1 klogd: last message repeated 28 times
Mar 31 21:36:03 192.168.2.1 klogd: last message repeated 39 times
Mar 31 21:36:52 syslogd started: BusyBox v1.01 (2009.06.03-11:15+0000)
boom. another restart 67 minutes later....
Mar 31 22:20:35 192.168.2.1 klogd: last message repeated 19 times
Mar 31 22:21:29 syslogd started: BusyBox v1.01 (2009.06.03-11:15+0000)
Mar 31 22:21:29 192.168.2.1 klogd: klogd started: BusyBox v1.00-pre2 (2008.02.27-15:42+0000)
and again about 50 mins later. This happened all night.
I can only guess that some buffer is filling up and causing a restart. The funny thing is this happens less often while the network is utilized. I'd like to help figure this problem out any way I can. I've done the factory reset and re-configured. I'm about to try that again.
I also disabled the DoS attack stuff because:
Mar 31 12:18:59 192.168.2.1 [DoS] [Detected UDP Land Attack] (UDP) Incomming Source:76.214.xxx:33445 Destination:76.214.xxx:51414 [Droped]
the router was getting some strange false positives (same src/dst IP, my wan interface). Also it doesn't inspire a lot of confidence that there are typo's in the firmware! "Incomming" and "Droped"
Thanks in advance,
Keith -
Can I install a new internal HDD and reboot from time machine?
I'm away from home at the moment and my internal HDD has failed and I am putting in a new HDD I have the time machine backup on a external HDD but no OSX disks with me can I re boot OS from my time machine backup?
Allan Eckert wrote:
The only time the system on the DVD matters, is when you install from the DVD.
One exception: If you do a full system restore from a Snow Leopard backup using a Leopard Install disk, your Mac either won't start up or will kernel panic. See #E8 in Time Machine - Troubleshooting. -
Moved Library from external HDD to MyBook NAS...
Hello forum - I am both perplexed and frustrated. I have moved my entire itunes library from one external drive to another network drive. I re-pointed iTunes to it's appropriate library.itl file. All music, movies, audiobook, etc. seem to appear. Two things do not appear:
1. The bulk of my artwork. 99% of my library has artwork which I manually embedded which is what I find strange as it seems that often that is the suggested fix when it is missing. Any thoughts? Is there a way to have itunes re-scan a folder and re-populate?
2. The "Shared Library" icon on the left hand side is also vanished. It does appear that home Sharing is on - but no icon.
I'm using the latest version of itunes, OSX Mountain lion 10.8.2 on 15" MBPr 2.3GHz.
FWIW - originally library was on a WD MyBook external drive. I transferred it to a WD MyBook Live Duo drive which is plugged into my airport extreme (latest model).
Thanks in advance for any advice.
SteveOk - I may have resolved this (let you know in about 2 days...). New question;
I did a library re-organization with iTunes. The heirarchy of folders seems weird - is this normal or "ok"?
On external drive:
There is content located in Music, Movies, etc. but there is alos content including Music, Movies, etc in the "iTunes Media Folder" - is that the way it i ssupposed to be? Seems like all music should be in one place - yes/no?
Thanks - Steve -
My NAS to Timemachine drops when in wireless mode
Hi all,
Been searching for solution but coudn't find any. Hope someone here can help?!
I have a NAS (WD My World Book - White light edition) which recently upgraded to the latest firmware to work with Time machine appletalk 2.2.
All good when I am connected to my LAN, Lion picks up the NAS and able to backup. When I unplug the LAN cable and go wireless, Lion drops the NAS (no connection to Timemachine).
So I decided to plug the LAN cable back in, but unfortunately, Lion didnt seem to pick up the NAS again :-(.
The only way to solve it is to reboot my MBP while connecting to LAN.
Is this normal or a bug or something screwy with my MBP?I killed the mDNSResponder in Activity Monitor, plugged the cable back in, and now it can see my NAS.. weird.
But wireless is still a no go -
Changed HDD in NAS Drive, lost all links
Hello world,
I keep all photos in separate directory structure (16.000 photos in 140 directories), and have the mediathek on the local drive.
Now I have changed the HDDs in my NAS drive (dLink DNS 323, connection via smb), and restored all folders from a backup. In the finder I can see all photos (randomly tested).
Although the share-name and the user-ID are set up the same as before, Aperture lost the connection to all photos.
I am not going to believe that I have to refresh the links to every single photo...
Any idea anyone?
Greetings from GermanyHello,
usually using "Reconnect All" should suffice to reconnect all files, if you restored your library from a backup.
But I am not quite sure, how you restored your library - do I understand this correctly:
Your Aperture Library (Mediathek in german) is on the system drive?
Your referenced master image files / original image files are on a NAS drive?
You had to replace the drives in the NAS and restored from backup?
Then your estored files are no longer identical to the files Aperture is referencing, and you will have to reconnect.
In the long term the NAS setup might be risky; Apple recommends to keep the Aperture library on a local volume, MacOS X extended formatted - your NAS is neither local nor MacOS X extended, see this Support Article:
Aperture: Use locally mounted Mac OS X Extended volumes for your Aperture library:
http://support.apple.com/kb/TS3252
To reconnect your images quickly:
Make sure your NAS is properly mounted.
Create a smart album containing all referenced images:
File > New > Smart Album
Add rule: File status is referenced (or offline, or missing)
Select all images in the smart album.
From Aperture's main menu bar select: File > Locate referenced files
in the "Referenced Files" panel you see two panes:
In the upper pane select the first image with a missing original (master) image file.
In the lower pane point the File chooser to the location of the master on your NAS.
Now the "Reconnect" buttons should appear. Press "Reconnect All". If you are lucky, this will reconnect all missing original files at once.
Good Luck, und "Hummel Hummel" aus Hamburg von der Waterkant!
Léonie -
Finder hangs, internal HDD "not ejected properly"
My finder hangs and then it says "disc not ejected properly", which I'm pretty sure is referring to the internal HDD (in a 1TB Fusion). I know this because in iStats the HDD drops off the monitor.
Already had the HDD replaced once per Applecare when it failed their diagnostic test, but the issue came right back, and a clean install didn't work for long. Then, Apple "repaired" it because this HDD passed their test, 2 clean installs later and I still have same issue. Safe mode, PRAM/SMC reset, nothing has worked.
Anyone seen this or know what to do?Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
Running 10.8.5, I dropped MacBook Pro 2012 and HDD never rebooted again. Replaced with SSD and MacBook Pro works fine. Tried crashed HDD via external USB but neither Disk Utility nor Data Rescue 3 recognize crashed HDD. Have also tried leaving crashed HDD installed and booting from remote HDD or from Data Rescue in DVD drive, in both cases where damaged HDD is left installed and an alternative boot method is used, I get from the all gray screen to the Apple with a progress bar on bottom. Progress bar hits about 15% and then screen goes black (but unit does not shut down). Damaged HDD makes no noises.
My question is: what's the best way to recover data off of the crashed HDD if neither Disk Utility nor Data Rescue 3 recognize it? I have some accounting docs and home movies/photos that are lost and don't want to spend thousands to recover. I've heard of Linux (Ubuntu) programs to read and transfer directories or is this a Genuis Bar or Disc Savers type problem? Thanks!many HDD companies have data recovery services such as:
http://www.seagate.com/services-software/data-recovery-services/
You can read more here:
http://lifehacker.com/5982339/diy-data-recovery-tricks-for-when-your-hard-drive- goes-belly-up -
I dont know what's wrong with my iBook.
At first, safari kept on crashing. I deleted plists (Safari prefs files) and Safari ran again using new default plists... for awhile. Then it crashed and wouldnt start at all.
Then I got my first kernel panic (BSOD of OSX)
I reinstalled OSX TWICE trying to figure out if updates were causing the problem.
I also tried Apple Hardware test from my installation disc. Everyiting ok.
After that, I got a shock when my applications would not run! Safari would exit. YM crashed. MSNmsgr crashed. And then the kernel would panic (like BSOD).
I also removed RAM i recently installed.
PC2700 256MB Kingston.
According to Apple, the iBook G4 1ghz uses PC2100 RAM but is compatible with PC2700 RAM.
I tried Apple Hardware test again from my installation disc. Everyting is fine.
But the system hanged on startup. No login screen at all.
I tried reinstall OSX. But the installer (booted from DVD) does not detect my HDD!!!
shocked, i thought that my disk had failed.
Diskutility of the installer. cannot repair the volume.
HFS: volume okay
Volume ... corrupt.
So, I erased the HDD.
Rebooted and now installer recognizes the disc.
So i just reinstalled OSX for the FOURTH time.
Now im really confused...
What could have caused the HDD to become corrupt?
Was it incompatible RAM? (but the RAM should be compatible)
or is it my HDD failing?
I ran diskwarrior.
SMART HDD reports indicate that the disc is running normally.
I am really confused. Dont know what could be the cause of the problem.
I cannot risk my computer being unable to boot again as i use it for work. And when OSX cannot boot and I had to reinstall (note, Install and archive was not available as OS DVD was a lower version than the installed version) and all my files were gone. Luckily, i had a backup.Hi, and welcome to Apple Discussions.
It is doubtful that you have been seeing is a kernel panic, since a kernel panic does not give you a blue screen.
The hard drive can be corrupted if you do a forced shutdown instead of a normal one. If you were stuck on a blue screen repeatedly, it is my assumption that you did repeated forced shutdowns. Any and every time you do one, you should repair the hard drive before continuing to work.
I don't understand why Archive and Install was not available to you. I have started over after updates with my 10.3.0 CD and used Archive and Install. There should be no problem in that regard.
The iBook G4 Discussions can be found here. -
Strange problem when copying files to NAS
Hello all. I have a strange problem when trying to copy files from my intel iMac to my Seagate NAS. I am copying files from my HD and when the file is nearly copyied i get an error message saying that the file can't be copied because it is already in use by another application. Well... it surely isn't. I try copying them by ftp (Filezilla) and everything works fine. I can then access them through my media server but !!!! NOT THROUGH MY iMac!!!! It is like the files are not there!!!! But they definetely are! I tried fixing the disk permissions, rebooting NAS, iMac etc but nothing seems to solve the problem. Is there any suggestion of what might be wrong? I am under Mavericks and i am pretty sure that the problem started after the update. When copying from my external USB hard drive to my iMac HD everything works fine. The problem is from my iMac to my NAS.
Wow... thanks for the time you devote Linc.... Well below are the results of the above commands....
Step 1 returned no text.
Step 2 returned the following text:
com.tunabellysoftware.checkmytemp.GNTPClientService
jp.co.canon.MasterInstaller
com.WesternDigital.WDSmartWareD
com.wdc.WDDMservice
com.teamviewer.service
com.tappin.agent.plist
com.microsoft.office.licensing.helper
com.klieme.TimeMachineScheduler
com.adobe.SwitchBoard
com.adobe.fpsaud
Step 3 returned the following text:
com.adobe.PDApp.AAMUpdatesNotifier.59168.9D679ECB-757D-43DD-920E-153524EA697A
jp.co.canon.cijscannerregister.67792
jp.co.canon.ij.CNSSelectorAgent.66384
OpenObject.fuspredownloader.65328
com.tappin.TappIn.53712
com.ecamm.PhoneViewHelper.65680
com.pratikkumar.RemoteHelper.51424
com.elgato.eyetvhelper.10064
6.0.65152
com.tunabellysoftware.TemperatureGaugeHelper
com.paragon.ntfs.trial
com.teamviewer.desktop
com.teamviewer.teamviewer
com.sony.PMBPortable.AutoRun
com.google.keystone.user.agent
com.adobe.ARM.df0ab5bbe6f698196fcc21e3c1e66dcb758bd911f4d637272d9d8109
com.adobe.AAM.Scheduler-1.0
Step 4 returned the following text:
/Library/Components:
/Library/Extensions:
ATTOCelerityFC8.kext
ATTOExpressSASHBA2.kext
ATTOExpressSASRAID2.kext
ArcMSR.kext
CalDigitHDProDrv.kext
HighPointIOP.kext
HighPointRR.kext
PromiseSTEX.kext
SoftRAID.kext
/Library/Frameworks:
AEProfiling.framework
AERegistration.framework
Adobe AIR.framework
AudioMixEngine.framework
NyxAudioAnalysis.framework
PluginManager.framework
TSLicense.framework
WesternDigital
iLifeFaceRecognition.framework
iLifeKit.framework
iLifePageLayout.framework
iLifeSQLAccess.framework
iLifeSlideshow.framework
iTunesLibrary.framework
/Library/Input Methods:
/Library/Internet Plug-Ins:
AdobePDFViewer.plugin
AdobePDFViewerNPAPI.plugin
Aspera Web.plugin
Default Browser.plugin
EPPEX Plugin.plugin
Flash Player.plugin
Flip4Mac WMV Plugin.plugin
JavaAppletPlugin.plugin
NavIn.plugin
Quartz Composer.webplugin
QuickTime Plugin.plugin
SharePointBrowserPlugin.plugin
SharePointWebKitPlugin.webplugin
Silverlight.plugin
flashplayer.xpt
iPhotoPhotocast.plugin
nsIQTScriptablePlugin.xpt
/Library/Keyboard Layouts:
/Library/LaunchAgents:
com.adobe.AAM.Updater-1.0.plist
com.apple.NavService.plist
com.oracle.java.Java-Updater.plist
com.sony.PMBPortable.AutoRun.plist
com.teamviewer.teamviewer.plist
com.teamviewer.teamviewer_desktop.plist
/Library/LaunchDaemons:
com.WesternDigital.WDSmartWareD.plist
com.adobe.SwitchBoard.plist
com.adobe.fpsaud.plist
com.klieme.TimeMachineScheduler.plist
com.microsoft.office.licensing.helper.plist
com.oracle.java.Helper-Tool.plist
com.tappin.agent.plist
com.teamviewer.teamviewer_service.plist
com.wdc.WDDMservice.plist
jp.co.canon.MasterInstaller.plist
/Library/PreferencePanes:
EyeConnect.prefPane
Flash Player.prefPane
Flip4Mac WMV.prefPane
GRproofing.prefPane
Growl.prefPane
JavaControlPanel.prefPane
NTFSforMacOSX.prefPane
Perian.prefPane
TappIn.prefPane
TimeMachineScheduler.prefPane
/Library/PrivilegedHelperTools:
com.microsoft.office.licensing.helper
jp.co.canon.MasterInstaller
/Library/QuickLook:
GBQLGenerator.qlgenerator
QuickLookEyeTV.qlgenerator
iBooksAuthor.qlgenerator
iWork.qlgenerator
/Library/QuickTime:
AC3MovieImport.component
AppleIntermediateCodec.component
AppleMPEG2Codec.component
EyeTV MPEG Support.component
Perian.component
/Library/ScriptingAdditions:
Adobe Unit Types.osax
/Library/Spotlight:
GBSpotlightImporter.mdimporter
LogicPro.mdimporter
Microsoft Office.mdimporter
iBooksAuthor.mdimporter
iWork.mdimporter
/Library/StartupItems:
ChmodBPF
DynDNSUpdater
EyeConnect
/etc/mach_init.d:
/etc/mach_init_per_login_session.d:
/etc/mach_init_per_user.d:
Library/Address Book Plug-Ins:
SkypeABDialer.bundle
SkypeABSMS.bundle
Library/Fonts:
AC-CondensedScript_Unicode.otf
AC-CuttingEdge.otf
AC-FrenchToast.otf
AC-Gorgi.otf
AC-HiSchool.otf
AC-Hollow_Unicode.otf
AC-Lundi.otf
AC-Lycee.otf
AC-Pathetic_unicode.otf
AC-mutlu_unicode.otf
ACRealAdult.otf
AVI-BonatiPT-Bold.ttf
AVI-BonatiPT-BoldItalic.ttf
AVI-BonatiPT-Italic.ttf
AVI-BonatiPT-Normal.ttf
AVI-Jacobs-Bold.ttf
AVI-Jacobs-BoldItalic.ttf
AVI-Jacobs-Italic.ttf
AVI-Jacobs-Normal.ttf
AVI-Optima-Bold.ttf
AVI-Optima-BoldItalic.ttf
AVI-Optima-Italic.ttf
AVI-Optima-Normal.ttf
AVI-OptimaCollege-Italic.ttf
AVI-OptimaCollege.ttf
AVI-ParisAifel-Medium.ttf
AVI-ParisAifel-MediumItalic.ttf
AdLib BT.suit
AdLibBTReg
Andale Mono
ArbuckleShadowNF.otf
Arial
Arial Black
Arial Narrow
BleeckerStreetShadedNF.otf
BundleofJoyOutlineNF.otf
CF Bac
CF Bar
CF Bar-Bold
CF BarText
CF BarText-Bold
CF Big
CF Compacta Bold
CF Compacta ExtraBold
CF Compacta Light
CF Compacta Medium
CF Compacta Regular
CF Criton
CF Criton-Contrafos
CF Criton-Heavy
CF Derrida-Bold
CF Derrida-Book
CF Derrida-Heavy
CF Derrida-Light
CF Derrida-SemiBold
CF DogEatDog
CF Fat
CF Holly
CF Holly-Bold
CF Holly-Light
CF Holly-Medium
CF Initials
CF Jet
CF Jet-Alter
CF Jet-Left
CF Jet-Right
CF Jet-Simple
CF K-Graffiti
CF K-Select
CF KouroudiSelect-Bold
CF KouroudiSelect-Fun
CF KouroudiSelect-Regular
CF KouroudisGraffiti-Dust
CF KouroudisGraffiti-Light
CF KouroudisGraffiti-Regular
CF LetterGothic
CF MatrixDot
CF MatrixFax
CF MatrixMonospace
CF MatrixNegative
CF Newspaper
CF PainterBlack
CF PainterBold
CF PainterRegular
CF Poster
CF Sans
CF Sans-Bold
CF Sans-Heavy
CF SempliceBold
CF SempliceRegular
CF SempliceThin
CF Smooth
CF Smooth-CondBold
CF Smooth-CondNorm
CF Smooth-ExtraBold
CF Smooth-Revenge
CF Smooth-Toy
CF Sophia
CF Sophia-Bold
CF Sophia-BoldItalic
CF Sophia-Italic
CF Stamp
CF Stencil
CF Suprematica
CF Twins
CF Venus
CFBarSG
CFBarSGBol
CFBarTexSG
CFBarTexSGBol
CFBigSG
CFCriSGCon
CFCriSGHea
CFDogEatDogSG
CFEteoclesContrafos
CFEteoclesHeavy
CFEteoclesRegular
CFFatSG
CFHolSGBol
CFHolSGLig
CFHolSGMed
CFIniSG
CFJetAlt
CFJetLef
CFJetRig
CFJetSim
CFKouGraSGDus
CFKouGraSGLig
CFKouGraSGReg
CFKouSelSGBol
CFKouSelSGFun
CFKouSelSGReg
CFLetGotSG
CFNewSG
CFSanSG
CFSanSGBol
CFSanSGHea
CFSmoSGConBol
CFSmoSGConNor
CFSmoSGExtBol
CFSmoSGRev
CFSmoSGToy
CFSopSG
CFSopSGBol
CFSopSGBolIta
CFSopSGIta
CFSteSG
CFSupSG
CFTwiSG
Century
ChicaGogoOpenNF.otf
D-Regular.suit
DReg
DejaVuSans-Bold.ttf
DejaVuSans-BoldOblique.ttf
DejaVuSans-ExtraLight.ttf
DejaVuSans-Oblique.ttf
DejaVuSans.ttf
DejaVuSansCondensed-Bold.ttf
DejaVuSansCondensed-BoldOblique.ttf
DejaVuSansCondensed-Oblique.ttf
DejaVuSansCondensed.ttf
DejaVuSansMono-Bold.ttf
DejaVuSansMono-BoldOblique.ttf
DejaVuSansMono-Oblique.ttf
DejaVuSansMono.ttf
DejaVuSerif-Bold.ttf
DejaVuSerif-BoldOblique.ttf
DejaVuSerif-Oblique.ttf
DejaVuSerif.ttf
DejaVuSerifCondensed-Bold.ttf
DejaVuSerifCondensed-BoldOblique.ttf
DejaVuSerifCondensed-Oblique.ttf
DejaVuSerifCondensed.ttf
Demo_ConeriaScript.ttf
Demo_ConeriaScript_Slanted.ttf
Demon
Demonstrator.suit
DidgereeDoodleOutlineNF.otf
DrumagStudioOutlineNF.otf
ElektromotoNarrowOutlineNF.otf
Franklin Gothic Demi
Franklin Gothic Heavy
FuturBTBol
FuturCon
Futura Bd BT.suit
Futura Condensed.suit
GFS Goschen-Italic.otf
GFSAmbrosia.otf
GFSDecker.otf
GFSEustace.otf
GFSFleischman.otf
GFSGaraldus.otf
GFSIgnacio.otf
GFSJackson.otf
GFSNeohellenic.otf
GFSNeohellenicBold.otf
GFSNeohellenicBoldIt.otf
GFSNeohellenicIt.otf
GFSNicefore.otf
GFSPhilostratos.otf
GFSPolyglot.otf
GFSTheokritos.otf
Georgia
Gill Sans Hel
Gill Sans Hel Pt-SCOS
Gill Sans Hel Pt-SCOSBold
Gill Sans Hel-Bold
Gill Sans Hel-BoldItalic
Gill Sans Hel-Con
Gill Sans Hel-ConBold
Gill Sans Hel-Demi
Gill Sans Hel-DemiItalic
Gill Sans Hel-ExBold
Gill Sans Hel-ExConBold
Gill Sans Hel-ExLight
Gill Sans Hel-Italic
Gill Sans Hel-Light
Gill Sans Hel-LightItalic
Gill Sans Hel-SCOS
Gill Sans Hel-SCOSBold
Gill Sans Hel-SemCon
Gill Sans Hel-SemConBdIt
Gill Sans Hel-SemConBold
Gill Sans Hel-SemConIt
Gill Sans Hel-SemConLight
Gill Sans Hel-SemConThin
Gill Sans Hel-Thin
Gill Sans Hel-UltBold
Gulim.ttf
HelveConBol
HelveNeuMedCon
Helvetica Condensed.suit
HelveticaNeue MediumCond.suit
Looney Tunes Tilt BT.ttf
LooseCabooseOutlineNF.otf
Lucida Sans
PF DaVinciScriptPoly-Inked.ttf
PF DaVinciScriptPoly-Reg.ttf
PFAlfabeta
PFAlfabetaOS Poly Bold.ttf
PFAlfabetaOS Poly BoldItal.ttf
PFAlfabetaOS Poly Italic.ttf
PFAlfabetaOS Poly Regular.ttf
PFAmateur
PFArabats.ttf
PFBarApart
PFBaseline
PFBaselineDisplay
PFBeatnick
PFBedroom
PFBellGothicText
PFBerkleyBlue
PFBevel
PFBodoniScriptOne
PFBodoniScriptTwo
PFBodoniText
PFBodoniText Poly-Bold.ttf
PFBodoniText PolyBoldItalic.ttf
PFBodoniText-Poly Italic.ttf
PFBodoniText-Poly Regular.ttf
PFBulletin
PFCatalog
PFCatalogPoly-Bold.ttf
PFCatalogPoly-BoldItalic.ttf
PFCatalogPoly-Italic.ttf
PFCatalogPoly-Regular.ttf
PFCentury
PFCereal
PFCheltenham
PFCosmonut
PFCosmonut-Astrobats.ttf
PFDaVinciScript
PFDeeJay
PFDidotOsPoly-Bold.ttf
PFDidotOsPoly-BoldItalic.ttf
PFDidotOsPoly-Italic.ttf
PFDidotOsPoly-Regular.ttf
PFDigicons-One.ttf
PFDigicons-Two.ttf
PFDigidotSemiSquare
PFDigidotSquare
PFDinDisplay
PFDinText
PFDinTextCompressed
PFDinTextCondensed
PFDiplomat
PFDiplomatPoly-Bold.ttf
PFDiplomatPoly-BoldItalic.ttf
PFDiplomatPoly-Italic.ttf
PFDiplomatPoly-Regular.ttf
PFDiplomatSans
PFEarthbound
PFEphemera
PFEphemera Poly-Bold.ttf
PFEphemera Poly-BoldItalic.ttf
PFEphemera Poly-Italic.ttf
PFEphemera Poly-Regular.ttf
PFEtnica
PFFragment
PFFranklinGothic
PFFreeScript
PFFuel
PFFusionSans
PFFuturaNeu
PFGaramondClassic
PFGlobal
PFGoudyInitials.ttf
PFGrid
PFHardkore
PFHausSquare
PFHighwayGothic
PFHighwayGothicCompressed
PFHighwayGothicCondensed
PFHighwayGothicExtended
PFHighwayGothicXtraCond
PFHipster
PFHitower
PFHybrid
PFIndex
PFInnercity
PFIsotext
PFIsotextExtended
PFJunior
PFKids
PFKids-LilStuff.ttf
PFKonstantinople
PFKonstantinople Initials.ttf
PFLetterGothicDisplay
PFLetterGothicNext
PFLibera
PFLithoText
PFMacsimile
PFManicAttack
PFMechanica
PFMediterra
PFMonumenta
PFNext
PFOnline
PFPanel
PFPaperback
PFPapernote
PFPlasmatic
PFPlayskool
PFPremierDisplay
PFPremierFrame
PFPremierText
PFPress
PFPsychedelia
PFRadikale
PFRafSkript
PFReminder
PFReport
PFRetrospace
PFRoyalscript
PFScriptor-Ligatures.ttf
PFScriptor-Ornaments.ttf
PFScriptor-Regular.ttf
PFSectorA
PFSectorB
PFSidetrip
PFSignSkript
PFSignSkript-AdClips.ttf
PFStamps
PFStudio
PFSugar
PFSystemplus
PFTemple
PFTemple-Icons.ttf
PFTempleSerif
PFTextbook
PFTraffic
PFTransport
PFUniversal
PFVenue
PFVideotext
PFWonderland
PFWonderland-Wonderbats.ttf
Palatino Linotype
SketchIcons.ttf
SketchIconsbold.ttf
SnoopySnailsOutlineNF.otf
StadionGreek
Tahoma
That_'s Font Folks!.ttf
Times New Roman
Times.suit
TimesRom
Trebuchet MS
UB-Aircraft
UB-AntiqueOlive
UB-AntiqueOlive-Bold
UB-AntiqueOlive-BoldItalic
UB-AntiqueOlive-Italic
UB-AntiqueOliveBlack
UB-AntiqueOliveBlack-Italic
UB-AntiqueOliveCompact
UB-AntiqueOliveCompact-Ita
UB-AntiqueOliveLight
UB-AntiqueOliveLight-Italic
UB-AvantGarde
UB-Baskerville
UB-Baskerville-Bold
UB-Baskerville-BoldItalic
UB-Baskerville-Italic
UB-Bonati
UB-BonatiCond
UB-BonatiHeavy
UB-Byzantine
UB-Calculator
UB-Calligula
UB-Century
UB-Century-Bold
UB-Century-BoldItalic
UB-Century-Italic
UB-Donuts
UB-DonutsCond
UB-End
UB-Europa
UB-FarWest
UB-FarWestExt
UB-Fashion
UB-Fine
UB-Flores
UB-Free
UB-Front
UB-Future
UB-FutureCond
UB-Goudies
UB-Helvetica
UB-Helvetica-Bold
UB-Helvetica-BoldItalic
UB-Helvetica-Italic
UB-HelveticaBlack
UB-HelveticaBlack-Italic
UB-HelveticaCond
UB-HelveticaCond-Bold
UB-HelveticaCond-BoldItalic
UB-HelveticaLight
UB-HelveticaLight-Italic
UB-HelveticaThin
UB-HelveticaThinCond
UB-King
UB-Lucky
UB-Maskat
UB-Muratti
UB-MurattiCond
UB-NewsLetter
UB-Ninza
UB-Omnius
UB-Optima
UB-Optima-Bold
UB-Optima-BoldItalic
UB-Optima-Italic
UB-Paris
UB-Rich
UB-Rockwell
UB-Rockwell-Bold
UB-Rockwell-BoldItalic
UB-Rockwell-Italic
UB-RockwellBlack
UB-RockwellBlack-Italic
UB-RockwellLight
UB-RockwellLight-Italic
UB-Script
UB-Sherlock
UB-SherlockCond
UB-Shop
UB-Sign
UB-Slogan
UB-Soccer
UB-SoccerCondOblique
UB-Souvenir
UB-Souvenir-Bold
UB-Souvenir-BoldItalic
UB-Souvenir-Italic
UB-SouvenirBlack
UB-SouvenirBlack-Italic
UB-SouvenirLight
UB-SouvenirLight-Italic
UB-Times
UB-Times-Bold
UB-Times-BoldItalic
UB-Times-Italic
UB-Unifine
UB-Vampire
UB-World
Verdana
VinnieBoombahOutlineNF.otf
Wingdings
Wingdings 2
Wingdings 3
nbyzn.ttf
soundfx.ttf
Library/Frameworks:
SamsungKiesFoundation.framework
SamsungKiesSerialPort.framework
Library/Input Methods:
.localized
Library/InputManagers:
Library/Internet Plug-Ins:
Google Earth Web Plug-in.plugin
iGetterBundle.plugin
Library/Keyboard Layouts:
Library/LaunchAgents:
com.adobe.AAM.Updater-1.0.plist
com.adobe.ARM.df0ab5bbe6f698196fcc21e3c1e66dcb758bd911f4d637272d9d8109.plist
[email protected]t.plist
com.google.keystone.agent.plist
Library/PreferencePanes:
.TVPC93ED0576A
Library/ScriptingAdditions:
iGetterScriptingAddition.osax
Library/Services:
ToastIt.service
Finallu step 5 returned the following text:
Skype, EyeTV Helper, RemoteHelper, PhoneViewHelper, TappIn, Dropbox, Canon IJ Network Scanner Selector EX, fuspredownloader, StatusMenu
I hope you find it helpful Linc. Many thanks for all the attention! -
MSI GT70 Switch from RAID (2xHDD) to 1x SSD & 1x HDD
Hi
I’ve a MSI GT70 (sry. I don’t know the exact model, but it’s the one whit the nvidia GTX 670M, Intel i7-3610 and 2x500 Gb HDD …currently it’s running Windows 7 and BIOS version is E1762IMS.30P).
Now I want to switch from RAID0 to 1x SSD (for the OS and co) and 1x HDD and upgrade to Windows 8.1.
What I’ve done so fare:
- I’ve removed the old HDDs (Just to have a working system as backup…until the new configuration works)
- Installed the new SSD (Samsung 840 Evo Basic (750GB, 2.5") https://www.digitec.ch/ProdukteDetails2.aspx?Reiter=Details&Artikel=280458)
- Installed a normal HDD 500 Gb HDD
- Changed SATA mode in BISO from RAID to AHCI
- Installed Windows 8.1 on SSD
My Problems:
- If I try to boot my notebook, I get a disk read error
- I tried to change the boot order so that my SDD is on the first place … But I don’t see the SSD in the BIOS
- If I remove the HDD and reboot with F11 pressed (Bootmenu) I can select my SSD and start Windows “without any problems”
Do you have any idea what I’m doing wrong?Did you install Windows 8.1 in UEFI or legacy mode?
Your boot order should probably have "Windows Boot Manager" for the SSD if you have installed in UEFI mode. -
2009 A1278 MBP 13" HDD not responsive
Have I exhuasted all possibilities to determine cause ---Where to next?
OS Mavericks, 320GB HDD, 8 GB RAM, New Battery - Upgraded 6-8 months ago!
Reviewed forum material and performed the list below:
MBP HDD not booting up - (apple logo w/ spinning gear and then prohibitive sign);
Tried PRAM reset - Fail;
Tried Safe Mode - Fail;
Tried SMC reset - Fail;
Tried Target mode - Selected HDD - Fail;
Removed HDD and Battery, re-sat them and retried 2 & 3 - Fail;
Inserted Installation disk, ran disk Utility, HDD not detected only SuperDrive;
Removed HDD and placed into Nexstar HDD Dock, reboot, select Target drive - PASS
Re-inserted HDD back into MBP, repeat steps 2 & 3 - Fail;
So, is it ribbon or logic board?
Preference towards ribbon - Cheaper - there is forum content on it;
Any test for logic board defects?
Much appreciated guys!!!
Thank you.My1stMac_RC,
given your investigation, it reads as though the internal SATA cable is the culprit — it seems to be a problem in 2009 models.
For future reference, since you have Mavericks installed, you could have also tried booting into Recovery mode. -
How to relocate OS X system files to boot off another internal drive?
Hello, Apple forums!
Currently I have a 120 GB SSD installed where the optical drive was in my MacBook, and Mavericks resides on that. I have a second, larger, internal disc I use to house projects, and audio samples (for music production). Recently, I learned that running the OS off an SSD may actually reduce its lifetime, with so much activity on it. I'm wondering about moving the OS to reside on the HDD (there's plenty of room) and using the SSD just for loading frequently-used samples (which would actually be a big time-saver.)
My question is, is it as simple as a copy-paste of all files on the SSD to the HDD, then rebooting holding Option and selecting the HDD? Please inform if there's any problems there. Thanks all.I don't know who told you running OS X on an SSD would reduce its life. Of course with an SSD a lot of file erasures and frequent read/writes will in time wear out the SSD, but by the time that happened you will no longer be using SSDs.
Furthermore, you cannot simply make drag and drop copies of system files. If you wish to install a system on another drive either you clone and existing drive or you make a completely new OS installation. -
Can't seem to download a lot of pics from my new Olympus OMD M1. Some download others won't. Any thoughts? I am using the new MAC Yosemite OS which also makes LR behave weird at times, like dropping menus in the Develop module or the color brush not working etc.
Don@newbieDon please answer a few questions so we can understand what you are trying to achieve, and how we can better advise you.
a. When you refer to the card, is the card still in the Camera?
b. You have the Camera attached to the computer via a USB cable?
c. You have the card in a card reader which is attached to the computer?
d. Is the card inserted to a SD slot on your computer?
If the answer to a + b is yes, then when importing the image files to Lightroom you will need to use the "Copy" option and decide where you wish to copy the original files to. Your HDD, and external HDD or even a HDD on a NAS.
If the answer to c is yes, then do the above.
If the answer to d is yes, then do the above.
If the answer to all the above is no then provide some more details.
Maybe you are looking for
-
Can't move items from one box to another
I have set up a separate mailbox for a certain list with some rules to sort new mail to this box. However, there are from the past a number of incoming items in my Inbox which are not sorted to this new box and I want to move them manually. Usually I
-
Fetching property value in script logic!!
Hello Experts, We are using BPC 7.5 M, I am working on a script logic and need to fetch a value of a property of a dimension member where dimension member is itself defined in some property. We have a Org dimension which has a property "FORECAST_UNIT
-
Hi, Can any one tell me how to resolve this issue. "Could not determine the year for TDS Certificate number " Please help Thanks Deepak
-
Hi! I´m having a logical misunderstanding about NPS, EAP-TLS and certificates. Maybe you can help me out with this. In my environment I have AD, NPS, CA and network devices. I´m using successfully Wifi EAP-TLS policy and my Ethernet policies are work
-
Use of the function u0093SXPG_COMMAND_EXECUTE"
Hello Friends, Can anybody explain me what is the use of the function SXPG_COMMAND_EXECUTE" in the ABAP programs. I know this is related to external commands. Regards, Shreekant