HDD for both PC and iMac file sharing via AE connection

I am considering to use, via airport exreme, one HDD as the common and backup HD for sharing some files between the window based laptop and iMac, what type to HDD I need? Do I need to partition the HDD?

Do you intend to keep this HDD attached to the 802.11n AirPort Extreme Base Station (AEBSn) for sharing between PCs & Macs or will you also want to move the HDD between computers?
If you will be leaving it attached to the AEBSn, them I would recommend that you first format it for HFS+ by temporarily connecting it to your Mac.
If it will be doing both, then you may want to partition it as the AEBSn will only read drives formatted in either HFS+ or FAT32.

Similar Messages

  • Best way to set up wireless for both pc and Mac printer sharing

    I have multiple Mac's and PC's that access my network with an Epson printer connected to the Airport Extreme base station...all works well but I cannot print from any PC or from my Windows XP on my Macpro via PARRALLELS or Bootcamp.
    any ideas as to the best setup here??
    eric

    I have multiple Mac's and PC's that access my network
    with an Epson printer connected to the Airport
    Extreme base station...all works well but I cannot
    print from any PC or from my Windows XP on my Macpro
    via PARRALLELS or Bootcamp.
    any ideas as to the best setup here??
    Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express
    http://tech.ifelix.net/1004.html
    Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express using Bonjour
    http://tech.ifelix.net/1008.html
    Problems with finding Printer Driver on Windows XP when using printer connected to Airport Extreme or Express
    http://tech.ifelix.net/1012.html
    iFelix

  • How can I sync my photo contents in iPhoto on my iMac to my new iPAD's iPhoto?  I follwed all the instructions on manuals for both iPAD and iTunes re syncing, but I cannot find "phone button" under Device name on iTunes page. Please help!  Thanks!

    I follwed all the instructions on manuals for both iPAD and iTunes re syncing, but after physically connecting iPAD with iMac with USB or via WiFi I still cannot find "phone button" under Device name on iTunes page. Please help!  Thanks!
    I have been creating a photo book using a lots of photographs on iPhoto, and then I took another photos by using new iPAD which I want to integrate with the original album/book on iMac. I was able to import them from iPAD's iPhoto to iMac's iPhoto.  However I cannot import or transfer or sync anything from iMac's iPhoto to that of my iPAD. 
    So my iPhoto page on iPAD contains only 3 or 4 newly created albums, and no other info.  That means no syncing....
    I am supposed to be able to work on this project on either of these iPAD and iMac, correct?
    I am puzzled.  I appreciate for your advice and help.
    Thank you!

    It doesn't appear under the iPad device on the left-hand sidebar of iTunes, you need to select the iPad device on the sidebar and then select the Photos tab on the right-hand side of iTunes e.g.
    And then on the right-hand side :

  • I have connected a new (set up for mac) seagate external HD and although file sharing is turned on the HD doesn't show up on any of the other computers on our network??????  Please help!!!!!

    I have connected a new (set up for mac) seagate external HD and although file sharing is turned on the HD doesn't show up on any of the other computers on our network??????  Please help!!!!!

    If the HD is setup for Mac and plugged into the AE.. with file sharing on, it should work.
    Try manually mounting the disk.
    In finder use go, connect to server, and type in AFP://AEName or AFP://AEIPaddress.. where you replace what I wrote with the actual name or actual IP.
    Later versions of Mac OS.. like ML for some strange reason have their preferences set by default to not show network drives.. change finder preference to see everything.

  • Creating InDesign files for both print and mobile output?

    I am looking for a way to create files that can be multi-purpose for both print and mobile/online environments. I would like the output to be 2 different PDFs from one set of Indesign files. The problem I am encountering is that currently my files are full of hi-res and vector graphics, effects, and are generally created to be optimized for large-scale printings on offset or digital presses. I am trying to use the same files to generate files that are optimized for mobile and online presentation but finding that the number of vector graphics specifically is slowing page display down.
    My initial reaction is that the solution would have to be dual-development. Multiple forms of 'master graphics' would have to be created and placed on multiple layers (one for print and one for mobile/online).
    Hi-res files could be made lo-res in Acrobat or Pitstop, but vector imagery would have to be rasterized and I am not aware of a method to do that in either of those programs.
    I have found some info on adobe.com leading me to think that maybe CS6 addresses some of this, but the majority of my work is being done in CS4 with only the bleeding edge being done in CS5.
    Thanks in advance for any insight.

    the output to be 2 different PDFs from one set of Indesign files.
    You can accomplish this by saving each PDF using a different preset - High Quality Print for the high res, smallest file size for web
    but vector imagery would have to be rasterized...
    You should be trying to keep all vector work as vectors. This, in most cases, lowers the file size. There are a couple of exceptions to that like if the vectors are very complex (layered etc) and you are using bitmap effects like drop shadows. In general, rasterizing will increase the file size and lower the quality.
    Is there any functional difference between the 2 PDFs? I am wondering why exporting using 2 different presets will not do the job efficiently enough. You could always save your linked images with a low res version - same file but make a copy 100dpi instead of 300dpi. This might help but InD normally downsamples the images anyway when exporting as smallest file size.
    EDIT:// In Acrobat, you can save as "Reduced Size PDF" which strips out all the meta data etc and makes the PDF lighter and faster for web use. This would be a final, before publishing online step.

  • HT5282 What security is best for my MacBookPro and iMac? I have had some company asking me to join them to 'clean' and get rid of some unused files. Is this ok, the cost if around $40. I don't mind paying but I am a bit worried they might not be approved

    Hi,
    Am new at this. What security is best for my MacBookPro and iMac? I have had some company asking me to join them to 'clean' and get rid of some unused files. Is this ok, the cost if around $40. I don't mind paying but I am a bit worried they might not be approved by Apple.

    I have had some company asking me to join them to 'clean' and get rid of some unused files.
    Does this company know you use Mac OS X? If so this is a worrysome trend.
    For a couple of years now there have been several scam artists that call you, claiming to be from 'tech support', or your ISP or even Microsoft, reporting that your machine has been idenfitied as being infected and that you need to give them access to your machine to 'clean it up'. In the process of this 'clean up' they thoroughly hose the system by trashing important files and then demand more money in 'recovery fees' to restore the system.
    I've laughed in their face whenever they've called me since they have no clue of how to compromise a Mac system, but if they've started to target Mac users then more vigilence is required.
    http://www.informationweek.com/security/management/microsoft-windows-support-cal l-scams-7-f/240005023
    Just Google 'microsoft support scam' for more reports/variations.

  • Oh boy, what did 10.6.2 do to my iMac  file sharing?

    Hi all, I upgraded two machines to 10.6.2, an imac and an mbp, both newer but not the newest. All seemed well but for one problem with the imac: file sharing is really hosed. In the system preferences pane/Sharing I now get this behavior:
    1) File Sharing: On, but there are no longer any shared folders or users. I can't add any either.
    2) If I click Options, I see that Share files and and folders using AFP is checked, as is Share files and folders using SMB (Windows) with the proper Account ticked on.
    3) If I try to share a new folder, then tick off Share files and and folders using AFP, it turns to "-" and file sharing is shut off immediately - and then ALL **** BREAKS LOOSE! I lose keyboard, can't open programs, can't use task bar, and icons clicked on the dock disappear.
    Here are the events in a less emotional printout:
    Warning 11/13/09 9:09:29 PM LSSharedFileListInsertItemFSRef returned NULL for path:/Volumes/StudioC/8.Downloads
    Notice 11/13/09 9:09:29 PM TabletDriver[307]: CarbonCore.framework: coreservicesd process died; attempting to reconnect but future use may result in erroneous behavior.
    Notice 11/13/09 9:09:29 PM coreaudiod: CarbonCore.framework: coreservicesd process died; attempting to reconnect but future use may result in erroneous behavior.
    Warning 11/13/09 9:09:29 PM (com.apple.coreservicesd[188]) Job appears to have crashed: Segmentation fault
    Notice 11/13/09 9:09:29 PM TabletDriver[307]: CarbonCore.framework: coreservicesd process died; attempting to reconnect but future use may result in erroneous behavior.
    Notice 11/13/09 9:09:29 PM 2009-11-13 21:09:29.689 ReportCrash[1461:2a03] Saved crash report for coreservicesd[188] version ??? (???) to /Library/Logs/DiagnosticReports/coreservicesd2009-11-13-210929localhost.crash
    Warning 11/13/09 9:09:34 PM ### Error:268435459 File:/SourceCache/SharingPref/SharingPref-193/Shared Classes/SambaUsersSheetManager.m Line:265
    Notice 11/13/09 9:09:57 PM _RegisterApplication(), FAILED TO REGISTER PROCESS WITH CPS/CoreGraphics in WindowServer, err=-50
    Notice 11/13/09 9:09:58 PM _RegisterApplication(), FAILED TO REGISTER PROCESS WITH CPS/CoreGraphics in WindowServer, err=-50
    Warning 11/13/09 9:10:12 PM * WARNING: Method selectRow:byExtendingSelection: in class QSTableView is deprecated. It will be removed in a future release and should no longer be used.
    Warning 11/13/09 9:10:29 PM ### Error:268435459 File:/SourceCache/SharingPref/SharingPref-193/Shared Classes/SambaUsersSheetManager.m Line:265
    Warning 11/13/09 9:10:31 PM ### Error:268435459 File:/SourceCache/SharingPref/SharingPref-193/Shared Classes/SambaUsersSheetManager.m Line:278
    This looks pretty bad and the behavior has to be the worst I've ever seen on a mac...it's like the entire system becomes unstable. I've tried all the usual things like Checking Permissions and running Disk Warrior. I even ran Applejack auto figuring I could not hose this up anymore. But nothing seems to fix it. The MBP however is just fine with filesharing and 10.6.2, so this seems to be imac specific. Both machines are configured with pretty much the same software.
    Another worrying error message in console is this one, only because if I ever get the above resolved, this machine goes back to FCP editing:
    Error 11/13/09 9:00:44 PM Error loading /Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHDAudio: dlopen(/Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHD Audio, 262): no suitable image found. Did find:
    /Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHDAudio: no matching architecture in universal wrapper

    Hi there, thx for that. the 10.6.2 upgrade was made with the downloaded combo installer, as I too always do this. I ran it again, as a last ditch for this image, and it changed nothing. It's the strangest thing. I don't have any users under file sharing, and I can't add any directories, and when I try, the entire system goes haywire. Reminds me of the PC days when the MS OS was infected:)
    Not sure what to do now, as I really would like to fix this image. And if I can't, I am not sure if I should risk another iMac with the update. I've read about a Finder Error 10180 bug here on the forums, and this one has that too...after the machine goes nuts, finder seems to be corrupt with that same error. Perhaps related?

  • WIndows XP and MacBook file sharing

    i want to share files between my MB black and my Windows XP
    sharing them over a LAN is the most logical way (no internet, files are too large to be transfered with a flash drive)
    i have an airport express that i connect to through airport and the airport express has an ethernet cable running from it to the jack in the back of my windows machine
    i know that because it is a direct connection i have to have my IP adresses and subnet mask the same on both machines so i set them that way
    in system preferences "windows sharing" is on and "personal file sharing" is on (even tho i no that is pointless for this setup) and my firewall is off
    in control panel (windows) i have my firewall disabled
    i made a "shared" folder on my windows and i right click > properties > sharing tab > i checked the box that says "share this folder on the network"
    after this i'm pretty much in the dark so can anyone help me?
    p. s. this post is also posted elsewhere bc i didn't know where to put it
    Macbook Black   Mac OS X (10.4.8)  

    On your MacBook look in Network in your finder. Under your workgroup you should see the Windows machine. My workgroup name is MSHOME yours could be something else. Click on it and it should allow you to connect to the windows machine. Just pick which folders you want to connect to and they should come up in your finder window. Now you can use that shared folder just like it was on your MacBook.
    TTFN
    Doc

  • E4200 Slow Wireless download and Network File Sharing

    When I first got the E4200 up and running I was able to transfer files from my wireless laptop to a wired laptop at speeds of over 2 MBps(distance was over 40 ft).  Now I have both laptops running wireless and a desktop that is wired via ethernet to the 4200 router and network file sharing runs much slower.  Right now network transfer speeds are around 500-550 kBps.
    Wireless network speeds are being affected also.  Wi-fi d/l speeds via Cisco speed test is usually 5-6x slower than my wired speed tests, with upload speeds being faster than the d/l speed(Laptop is only 2 feet away from router for testing).  And sometimes the wireless d/l speeds will slow down all the way to .15 mbps.
    Has anyone come across this problem and found a fix for it, or have some suggestions?  The router settings are mostly default and I have reset it to factory defaults via web interface and tried power cycling.  But nothing so far has worked.  I would hate to have to return this router and go back to the wrt54g.

    Ok, well I tried all these and changing the MTU down to 1365 made it run real slow, so I found out the optimal mtu and switched between auto and manual 1500, and auto gave me more consistent speeds.  It does seem to be running a bit faster with the name change of the 5 ghz band, and changing the channel of the 2.4 ghz band(Name changing 2.4 band did not make any noticable differences). 
    Right now I am getting download speeds around 10 mbps on the vista laptop(wireless), while the windows 7 desktop(wired) and laptop(wireless) are usually around 5.3-6 mbps.  File sharing between the windows 7 machines are 4.3 MBps and 2.9 MBps between vista laptop and W7 desktop.  Upload speeds on all machines are around 7mbps.
    I am happier with the more consistent speeds between all machines instead of really fast between just 2, but am confused to why the vista laptop is running faster and my upload speed is faster than the download speeds on 2 of my machines.

  • I have partitioned my time capsule, but I can't get it to work as a Time Machine back up and permanent media server for both mac and PC. What format do I need to partition the drive to so that it works for both mac and windows and so that it will be visab

    I have partitioned my time capsule, as I want part of it to act as a media server for both mac and windows. However I don't know what format that I need to partition it to. I also can't make it a permanently accesible drive. I want to restore the drive to the original format (which I don't know) and start again and re-partition the drive in a format that can be used for media by both mac and PC and for time machine back-ups and make the media part of it permanetly accesible so I can add and acccess my files.
    Thanks

    You are mixing up a couple of things here.
    The TC drive cannot be partitioned without removing it.. did you do that?
    If you partition it you must use a Mac disk utility and use the HFS+ ie standard Mac format. And GUID partition table not windows type.
    You can select erase disk in the airport utility.. that will take the disk back to original format. No partitions. TC is deliberately not partitioned as it is not a media server.. it is a backup device for TM. Over time .. the disk will be filled with TM backups so you have a long history of file changes to your computer.
    There is no media server in the TC.. it is merely disk storage.. you can serve files from it to a media device.. but the TC itself is dumb as dumb.
    Now the actual format of the drive is irrelevant to the PC.. The TC offers SMB file services to the network. You can copy files to and from the TC as if it was a local disk without caring one iota about the format. The TC handles that .. it is not a local disk .. it is a network drive.
    Although you cannot partition the TC. you can still copy files to it.. this does have implications for TM.. but as long as there is plenty of free space should not be a major issue.
    You can create a disk image via the disk utility in a Mac.. and as stated you can create partitions if you do it on a Mac with the disk directly connected which means breaking warranty if any exists on the TC.

  • I have Photoshop Elements 12 for both PC and Mac (I use both). I have a new camera, Nikon D810. I downloaded the latest version of Camera Raw, 8.8. My D810 is listed as a supported camera model. However, when I try to open a raw photo in Photoshop Element

    I have Photoshop Elements 12 for both PC and Mac (I use both). I have a new camera, Nikon D810. I downloaded the latest version of Camera Raw, 8.8. My D810 is listed as a supported camera model. However, when I try to open a raw photo in Photoshop Elements, I keep getting the message "Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. I have tried reinstalling Camera Raw many times, and have tried to open many different raw files in Elements, and still get the same error message. Please help.

    How did you try to install ACR 8.8.  The only way I know of that works with Elements is to use the Updates Choice on the Help menu.
    There are two charts supplied by Adobe that explain your RAW dilemma.  This one tells you what your camera needs:  http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html   This one tells you what version of software you need:  http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
    In your case, the Nikon D810 needs Adobe Camera Raw (ACR) 8.6 or Lightroom 5.6.  (Congratulations on buying a new camera!)
    To get to that level with Photoshop Elements, you will need to replace your Photoshop Elements 12 with version 13.   Adobe caps ACR updates on version 12 at 8.5.
    The most convenient way to get around it without spending any money is to use the FREE from Adobe DNG Converter.  Download and install it from here for FREE:  http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5855&fileID=5890  Once it is installed you can convert your D810 raw files to an Adobe RAW version with the .DNG file extension that most, if not all, versions of the various Adobe software programs can use.  That includes old versions of Photoshop, Elements and Lightroom.  DNG converter can be used as the tool to move your files from your memory card to your computer, is efficient, will convert in batches and is completely lossless.  There is no risk of any image quality degradation or RAW functionality.

  • I want to use my 1TB Seagate Hard drive for time machine and transferring files from Mac to PC.

    For about a year I've been using my 1TB external hard drive for only time machine. To be honest, it wasn't until today that I tried to connect my hard drive to a PC and realize it isn't compatible. I read about partitioning the hard drive so that it can work both for time machine and transferring files between pc and mac. I'm not what you would call tech savvy, so I was wondering if I can get some advice on how to do this.
    Thanks in advance.

    To do it, you have to partition the hard disk, so you will have one partition for Time Machine and another one to store files and use them in a PC and Mac. To create the partition, follow these steps > http://pondini.org/OSX/DU3.html
    In order to read and write in the external disk on the PC, you have to select "MS-DOS (FAT)" as "Format". If you choose any other option, the PC won't be able to read your external disk. Apart from that, note that you can't use files bigger than 4 GB with FAT. If you want to use the external disk with files bigger than 4 GB, you have to format your new partition in exFAT, and you have to do it on a PC

  • External hard drive for both windows and mac

    hello, all - just bought a western digital 500gb my book premium edition external hard drive. will be using for both pc and macbook, not necessarily to share files (though i may on occasion), but rather as a backup. been researching the discussion boards and concluded that i should use it as pre-formatted fat32. few questions...
    1) if i do use to share files, from what i understand i will be able to read windows files with my mac but i can't read mac files with windows (unless i have macdrive installed). is this correct?
    2) since mac can read/write to fat 32, is it necessary to partition the drives and keep the files separated? i talked to a "computer guy" earlier today and he said i should consider having two completely separate external hard drives as having files from two different operating systems on the same drive could cause major problems for both... i didn't really believe him.
    3) i have seen different posts stating using fat32 format for mac limits file size to 4gb. another post said 32gb. which is right? i have os is 10.4.7 if that makes a difference.
    thanks in advance for any insight.

    2 - i don't mind partitioning at all. but he strongly suggested not even partitioning but using two completely separate hard drives. yeah, the 500gb was a bit overkill, so if i can use it for both as opposed to one and buying an additional, i'd rather.
    2/3 - if i partition, is it best to divide it into ntfs and hfs+? or should i keep the pc portion fat32? if the mac portion is hfs+, can i store any size file? i have videos that are anywhere from 10-20gb, and i'd like to get them off my computer and into the external drive.
    thanks.

  • Use Sign.xml and Encrypt.xml for both request AND response within WSDL?

    Hi,
    ALSB: 2.6
    I was wandering if it's possible to use abstract outof the box WS-Policy file within WSDL file to specify encryption
    (Encrypt.xml) and digital signature(Sign.xml) with X509 for both request and response???
    So far, it only works for either request or response BUT not both. i.e. within WSDL file
    <!-- following WSDL works for encrypting and signing request with X509 in test console -->.....
    <wsdl:binding name="DexService2Soap" type="tns:DexService2Soap">
        <soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document" />
        <wsdl:operation name="Message">
                <soap:operation soapAction="urn:moe:dex:dexservice:2.0.0/Message" style="document" />
                              <wsdl:input>
                               <!-- WS-Policy file applied here -->
                             <wsp:Policy>
                                            <wsp:PolicyReference URI="policy:Sign.xml"/>
                                            <wsp:PolicyReference URI="policy:Encrypt.xml"/>
                                       </wsp:Policy>
                                     <soap:body use="literal" />
                               </wsdl:input>
                             <wsdl:output>
                                  <soap:body use="literal" />
                               </wsdl:output>
        </wsdl:operation>
      </wsdl:binding>
               Or
    <!-- following WSDL works for encrypting and signing response with X509 in test console -->
    <wsdl:binding name="DexService2Soap" type="tns:DexService2Soap">
        <soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document" />
        <wsdl:operation name="Message">
                <soap:operation soapAction="urn:moe:dex:dexservice:2.0.0/Message" style="document" />
                              <wsdl:input>
                                     <soap:body use="literal" />
                               </wsdl:input>
                             <wsdl:output>
                                       <!-- WS-Policy file applied here -->
                                       <wsp:Policy>
                                            <wsp:PolicyReference URI="policy:Sign.xml"/>
                                            <wsp:PolicyReference URI="policy:Encrypt.xml"/>
                                       </wsp:Policy>
                                  <soap:body use="literal" />
                               </wsdl:output>
        </wsdl:operation>
      </wsdl:binding>
    But not both
    <!-- following WSDL doesn't work for encrypting and signing both response and request with X509 in test console -->
    <wsdl:binding name="DexService2Soap" type="tns:DexService2Soap">
        <soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document" />
        <wsdl:operation name="Message">
                <soap:operation soapAction="urn:moe:dex:dexservice:2.0.0/Message" style="document" />
                              <wsdl:input>
                                        <!-- WS-Policy file applied here -->
                                       <wsp:Policy>
                                            <wsp:PolicyReference URI="policy:Sign.xml"/>
                                            <wsp:PolicyReference URI="policy:Encrypt.xml"/>
                                       </wsp:Policy>
                                     <soap:body use="literal" />
                               </wsdl:input>
                             <wsdl:output>
                                       <!-- WS-Policy file applied here -->
                                       <wsp:Policy>
                                            <wsp:PolicyReference URI="policy:Sign.xml"/>
                                            <wsp:PolicyReference URI="policy:Encrypt.xml"/>
                                       </wsp:Policy>
                                  <soap:body use="literal" />
                               </wsdl:output>
        </wsdl:operation>
      </wsdl:binding>
    ...      Instead, I got error message like
    <15/01/2008 10:15:04 AM NZDT> <Error> <ALSB Security> <BEA-387023> <An error ocurred during web service security inbound response processing [error-code: Fault
    , message-id: 3917705281899426819-4368b1eb.117762cff6e.-7fdb, proxy: DexServiceX509-Stub/Proxy Services/DexServiceX509-ProxyService, operation: Message]
    --- Error message:
    <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"><soapenv:Header/><soapenv:Body><soapenv:Fault><faultcode>soapenv:Server</faultcode>
    <faultstring>Failed to get token for tokenType: http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3</faultstring></soapenv:Fa
    ult></soapenv:Body></soapenv:Envelope>
    weblogic.xml.crypto.wss.WSSecurityException: Failed to get token for tokenType: http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#
    X509v3
    at weblogic.xml.crypto.wss.SecurityBuilderImpl.addEncryption(SecurityBuilderImpl.java:308)
    at weblogic.wsee.security.wss.SecurityPolicyDriver.processConfidentiality(SecurityPolicyDriver.java:280)
    at weblogic.wsee.security.wss.SecurityPolicyDriver.processOutbound(SecurityPolicyDriver.java:75)
    at weblogic.wsee.security.wss.SecurityPolicyDriver.processOutbound(SecurityPolicyDriver.java:64)
    at weblogic.wsee.security.WssServerHandler.processOutbound(WssServerHandler.java:86)
    Truncated. see log file for complete stacktrace
    >
    <15/01/2008 10:15:24 AM NZDT> <Error> <com.bea.weblogic.kernel> <000000> <Failed to build CertPath
    java.security.cert.CertPathBuilderException: [Security:090603]The certificate chain is invalid because it could not be completed. The trusted CAs did not inclu
    de CN=x509,OU=x509,O=x509,L=Wellington,ST=Wellington,C=NZ.
    at weblogic.security.providers.pk.WebLogicCertPathProviderRuntimeImpl$JDKCertPathBuilder.engineBuild(WebLogicCertPathProviderRuntimeImpl.java:669)
    at java.security.cert.CertPathBuilder.build(CertPathBuilder.java:194)
    at com.bea.common.security.internal.legacy.service.CertPathBuilderImpl$CertPathBuilderProviderImpl.build(CertPathBuilderImpl.java:67)
    at com.bea.common.security.internal.service.CertPathBuilderServiceImpl.build(CertPathBuilderServiceImpl.java:86)
    at jrockit.reflect.VirtualNativeMethodInvoker.invoke(Ljava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)
            Truncated. see log file for complete stacktrace
    >
    <15/01/2008 10:15:24 AM NZDT> <Error> <ALSB Security> <BEA-387022> <An error ocurred during web service security inbound request processing [error-code: Fault,
    message-id: 3917705281899426819-4368b1eb.117762cff6e.-7fd8, proxy: DexServiceX509-Stub/Proxy Services/DexServiceX509-ProxyService, operation: null]
    --- Error message:
    <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"><soapenv:Header/><soapenv:Body><soapenv:Fault xmlns:wsse="http://docs.oasis-open.or
    g/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"><faultcode>wsse:InvalidSecurityToken</faultcode><faultstring>Security token failed to validate. weblo
    gic.xml.crypto.wss.SecurityTokenValidateResult@3c5347b[status: false][msg [
      Version: V1
      Subject: CN=x509, OU=x509, O=x509, L=Wellington, ST=Wellington, C=NZ
      Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
      Key:  Sun RSA public key, 1024 bits
      modulus: 13052787793731294943682394984664645854838424340012907077330623....
      The 'System Error Handler' from 'Invocation Trace' in ALSB test console is something like
    [pre]     
    $fault:
    <con:fault xmlns:con="http://www.bea.com/wli/sb/context">
         <con:errorCode>BEA-386201</con:errorCode>
         <con:reason>
              A web service security fault
              occurred[{http://schemas.xmlsoap.org/soap/envelope/}Server][Failed
              to get token for tokenType:
              http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3]
         </con:reason>
         <con:details>
              <err:WebServiceSecurityFault
                   xmlns:err="http://www.bea.com/wli/sb/errors">
                   <err:faultcode
                        xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
                        soapenv:Server
                   </err:faultcode>
                   <err:faultstring>
                        Failed to get token for tokenType:
                        http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3
                   </err:faultstring>
              </err:WebServiceSecurityFault>
         </con:details>
         <con:location>
              <con:path>response-pipeline</con:path>
         </con:location>
    </con:fault>
    So is this a feature not supported in ALSB 2.6 yet or am I missing something dead simple?
    Thanks in advance
    Sam

    Instead of specifying policies for input and output separately you could place the policy reference only once in the operation element. Maybe will this solve your problem...
    http://e-docs.bea.com/alsb/docs26/security/ws_policy.html#wp1061166

  • The PDF file and slideshow view corrupted using iPhoto. Macbook air only get corrupted slideshow and Mac Mini both slideshow and PDF file is corrupted.

    The PDF file and slideshow view corrupted using iPhoto. Macbook air only get corrupted slideshow and Mac Mini both slideshow and PDF file is corrupted.

    Saving as a PDF file for some users have been a problem.  If you boot into  Safe Mode and run iPhoto you can create undamaged PDF files.  We don't know why the problem but this is a workaround.
    This problem prevents many from ordering books, calendars and cards since iPhoto creates PDF file of them for uploading and printing.  Booting into Safe Mode lets them successfully order those items.

Maybe you are looking for