HDD Problem from Boot Camp

Hey, I just got some problems trying to set up Boot Camp. On my MacBook, I have a good amount of HDD space used about, with about 60gbs left. So I wanted to set it up so that half of that would go to the new Windows partition. So I set that up, it partitioned the drive, told me to restart, but when I did, it was as if nothing happened. The new partition is nowhere to be found. But now I'm just missing 30gbs. It's as if it took out the 30gbs, went to put it in the partition, but just forgot about it. Now whenever I try to do anything in the Disk Utility that would use that 30gbs, it gives me an error. What can I do to fix this, aside from wiping the hard drive, I have a lot of stuff on here that I can not lose. Thanks.

Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

Similar Messages

  • HT4407 Is there any way to download these files manually from another source? The download from boot camp keeps stopping at around 25% and then produces the error "Can't download Windows Support Software because of a network problem". Thx!

    Is there any way to download these files manually from another source? The download from boot camp keeps stopping at around 25% and then produces the error "Can't download Windows Support Software because of a network problem". Thx!

    No. This issue is dicussed here frequently. The only option is to be patient and try often. Search this forum for other posts about this issue.

  • Boot Camp For Lion -- USB ISO Method --"Booting from Boot Camp Assistant created USB Drive...Failed to load BOOTMGR"

    Hello, has anyone had experience with dealing with this speciifc problem?
    In short, upon rebooting, I am getting a black screen with a line of text that says, "Booting from Boot Camp Assistant created USB Drive...Failed to load BOOTMGR." Nothing happens after that.
    I am using Mac OS X Lion 10.7.4. I have an ISO of Windows 7 Prof. along with an 8GB usb drive. I changed the coding in my bootcamp program to allow for the normally first invisible option that allows creation of a USB Installation program using an ISO that is normally only for computers without an optical drive.
    I have that box checked, the check for new software box, and the install windows box checked. I went through the process of creating the USB, downloading the software, and partitioning the drive. Then on restart, I get the failed to load bootmgr error.
    Some people have suggested using two usb drives for this. I am trying that method but it does not seem to help thus far.
    Can anyone offer any help?
    Thanks.

    from what i understand you are trying to install win 8 pro from a "backup disk" the one that you purchased from microsoft.
    this will not work, it is not an installer disk.
    you need to start the process again. erase the partition you made on your hdd. in disc utility click the minus button after selecting the bootcamp partition, then manually drag the divider down fully then apply.
    next, erase your usb then format it.
    download win 8 iso from here;
    http://getintopc.com/softwares/operating-systems/download-windows-8-pro/
    it is perfectly legal to use your purchased product key in this install.
    in bootcamp select the iso image you just downloaded, select your preferred partition size, check all 3 options.
    you have the support software on another usb but you wont need it so it can be discarded. the install will work far better with the iso and support on the same drive.

  • "Booting from Boot Camp Assistant created USB Drive...Failed to load BOOTMGR"

    Hi Apple Ppl of the Wrld: I need help I been working on installing windows 8 on my Mac.
    Spec of equipment:
    Mac Book Pro Mid 2012
    Bootcamp Version: Version 5.0.4 (473)
    Bootable USB Flash Drive: Type Scan disk 4 GB windows 8 pro iso image but without the driver and the 2nd Scan disk USB flash drive with 32 GB with the Bootcamp Drivers downloaded and saved to this drive.
    Please Note: I also have the original back up installation disc for Microsoft 8 Prof 64 from Microsoft where I purchased it from.
    1st Bootcamp is not recognizing the Original Microsoft 8 Pro backup disk from microsoft itself.
    Solution: I created the New Image from the Original Microsoft installed disc in my desk top and changed the extension to .ISO then burned the ISO image into the newly purchased DVD+R. Then I ran Bootcamp Once again and it get the following error message "The installer disc could not be found -- Insert your Windows installer disc and wait a few seconds for the disc to be recognized. Solution
    2: Created a bootable usb drive with bootcamp assistant successfully with bootcamp. Yes I close, ejected or un-mounted any image that was open or had been previously used then i restarted the Mac. Next, I start the bootcamp assistant tool once again then i get the same insert your windows installer disc message. 
    3: Then I try to resolve the installer disc not found issue: this are the steps i took: a). Lauch disc utilities
        1. Selected the top most drive 750 GB Macintosh HDD
        2. On the right you’ll see 5 tab buttons: First Aid | Erase | Partition | RAID | Restore.
        3. Choose Partition. Then I clicked + to add another partition size of the partition was 222 GB
        4. Change the Name of the Partition to BOOTCAMP
        5. Change the Format to MS-DOS (FAT)
        6. Click Apply to save the changes and then reboot your Mac and we’ll begin Windows installation.
        7. During reboot, press and hold the alt/Option key and you’ll be presented with drives to boot from.
        8. Use the arrow keys and return button to select the Windows yellow USB key drive containing your Windows 8 installation files.
        9. This will begin the Windows install. --> then i get the following message: "Booting from Boot Camp Assistant created USB Drive...Failed to load BOOTMGR".
    4: Take the Mac to best buy and let them resolve the issue and charge me like a million dollars for it :'( since i have no other idea who to get this bootcamp working at all. This has been a terribly lengthy issue and it is not as simple as it is claimed to be since i started with the Original Windows Disc Purchased from Microsoft and I have the Optical disc drive which it should be simpler from what I understand.
    Please can you help It would be of great help.
    <Email Edited by Host>

    from what i understand you are trying to install win 8 pro from a "backup disk" the one that you purchased from microsoft.
    this will not work, it is not an installer disk.
    you need to start the process again. erase the partition you made on your hdd. in disc utility click the minus button after selecting the bootcamp partition, then manually drag the divider down fully then apply.
    next, erase your usb then format it.
    download win 8 iso from here;
    http://getintopc.com/softwares/operating-systems/download-windows-8-pro/
    it is perfectly legal to use your purchased product key in this install.
    in bootcamp select the iso image you just downloaded, select your preferred partition size, check all 3 options.
    you have the support software on another usb but you wont need it so it can be discarded. the install will work far better with the iso and support on the same drive.

  • I can't start windows 7 normally from Boot Camp

    I can't start windows 7 normally from Boot Camp.
    It was running fine since I have installed it 7 months ago, but now it can't start or (restart) normally (safe mode is ok). It displays a black screen after showing the logo, and I have to shut down the machine. My Mac system is working fine. Mac technician (Genius Bar) has run a surface scan to verify hd integrity and proofed ok, but could not give any advice on Windows issues.
    Please advice if anything I should do before cleaning up my partition and reinstall Windows.

    I would guess and sorry for asking but you already tried booting from Windows 7 DVD and doing auto repair?
    There are dozens of things to look at and do, and begin with chkdsk in Windows, yes but that only looks at one aspect. You can't really check for bad sectors on a drive's sectors. The best? to use the drive vendor's own utility actually, often with a linux boot CD or Windows program (they don't make Mac OS versions, one reason I first installed Vista over 5 yrs ago)
    Restore check points
    Uninstall last update or driver
    Clean the system of debris temp files, caches, registry errors, fonts and left overs
    make sure you have 20% and 12GB free space or more
    A hard shutdown can create more problems.

  • Problems with Boot Camp - PLEASE HELP!

    I'm having problems with Boot Camp. Here's what's happening. I ran Boot Camp Assistant, partitioning a 32GB BOOTCAMP drive. I insert my copy of XP and start the installation. My MBP restarts and boots into the Windows Setup. I let it run through the initial actions. I press ENTER to proceed, F8 to accept the license agreement, then when I get to the part where I should be able to select the Partition 3 BOOTCAMP drive (as it says in the Apple Boot Camp Manual) there is only a Partition 1 Unknown drive. It is the only drive to choose from and its a C: drive. I can't figure out why after I run boot camp the partitioned drive doesn't appear as an option in the windows installation. Please help!!!
    Message was edited by: CarlConti08

    Boot into Leo, start Disk Utility and you should see two partitions, your Leo partition and a Fat32 partition of 32GB at the end of the drive.
    If not, boot camp didn't create it for some reason. If it is there then check it with DU and make sure its OK.
    While your in there give it a name so you can easily identify it in your windows installer.
    If there is no partition, create one using Disk Utility at the END if the drive. make sure you create it as a msdos (Fat32) partition and give it a name. The name cannot be more than 11 characters must be comprised of numbers and/or letters (no special characters).
    Verify it before exiting DU.
    Put in windows install disk, reboot - hold option key after the chime until you see the boot screen - select windows CD to begin install.
    Don't forget to install Leo windows drivers after installing windows.
    Kj

  • Problem with boot camp and windows 8

    I have a Macbook late 2009 with Mountain Lion. I want to install windows 8 with boot camp but when I am asked to enter drivers, windows 8 don't find them. I have downloaded drivers from boot camp assistant but they don't work. When Apple will provide ???

    Obviously Boot Camp does not support Win 8 at this time. When and IF Apple decides to do that no one here knows. This is a user to user forum. Perhaps you should call Apple support and ask them.

  • I can´t remove win from my mac because I can´t select the remove option from boot camp assist. Can anybody help me?

    I can´t remove windows partition from my mac because I´can´t select the remove option from boot camp assit. Can any body help me?

    open disc utility choose the drive you need partitioning highlight the bootcamp partition and click on the minus sign at the bottom left.
    after this manually resize your drive by dragging the partition line all the way down and click on partition.

  • I need to download iMac 12,1 windows 7 compatibility software, because i can't get it from boot camp 4.0, please!!

    When im trying to download the compatibility software for window 7 from boot camp 4.0 appears an error  and the download could not finish.
    I need to download the compatiblity software or driver for windows 7 from somewhere.......

    Try again, there is no somewhere else

  • Migrate from Boot Camp to Parallels

    I've followed the threads about using the Boot Camp partition as a VM in Parallels, but I want to know if there is an advantage to keeping the Boot Camp partition if I doubt I'll ever need to re-boot into Boot Camp. I'm thinking I want to migrate my WinXP installation from Boot Camp into Parallels, and then delete the Boot Camp partition alltogether. How would I do this, and am I just making extra work for myself?

    wadelaw wrote:
    I may not have been clear before. I want to know the best way to migrate an existing Boot Camp WinXP installation into a Parallels VM. I would rather NOT simply use the Boot Camp partition as a VM.
    Hi,
    Parallels Transporter http://www.parallels.com/products/desktop/features/transporter/ should do the trick.
    Regards
    Stefan

  • Problems with Boot camp and External HDD's

    Hi, I recently installed windows XP using Boot Camp, and everything worked fine, until yesterday when I tried to reboot into MAC from WINDOWS. It restarts back into windows everytime, and now I can't get back to mac! (using leopard, not snow leopard) Whats wrong?
    Another thing, I have a 500gb Lacie ext HDD, and I can use it fine with mac, but when I tried to access it with windows, it won't work. It will appear in My Computer but when I log in it won't access the data. What can I do?
    Im using the HDD for backups with time machine, is this why windows cant access it?
    Thanks in advance

    FAT32 will accessible from both Windows and OS X
    If you don't want to reformat your ext drive you need something like http://www.paragon-software.com/home/hfs-windows/ or http://www.mediafour.com/products/macdrive/

  • Apple Mini-DVI to VGA Adapter Problems in Boot Camp / Windows

    I currently run Windows XP SP2 on my MacBook and recently purchased the Mini-DVI to VGA adapter so I could hook up the MacBook to an external projector, monitor, or TV to display what's on my Windows screen on the external device. However, when I connect it to any external device, it just goes nuts and sporadically continues to make the hardware connect and hardware disconnect sounds and doesn't allow for external output of the screen. Any suggestions...? Thanks!
    Marc

    I think I solved this problem.
    It was in issue for me. My second monitor would only display the Windows XP screen when it was loading, then it would black out. I couldn't even move my mouse arrow to the other side. Then I fixed it, here's how (running Windows XP SP3):
    1. Start > Control Panel > Appearance and Themes
    2. Display
    3. Go to tab "settings"
    4. Double click the blue image with the "2" inside it. This is the second monitor, adjacent to your first, or primary, monitor. The blue box may be a desaturated, greyish blue, meaning that the monitor is disabled. Click it and it a box will pop up asking if you want to enable the monitor. Click OK, and then like magic, your monitor is resurected in it's Windows Glory! From there, adjust the resolution, and it should work perfectly.
    This isn't a Boot Camp compatability issue, it's just a problem with the lack of familiarity that users of OS X have with using XP.
    Have a nice day!
    Message was edited by: BlakeTron
    Message was edited by: BlakeTron

  • Setup.exe from Boot Camp won't work with Windows Xp Home SP2

    Hi,
    I just bought the great MacBook Pro. So I work over years in Windows it's absolutliy necessary to migrate my old System to MacBook. I succeeded in cloning my old installation completly to the MacBook and Windows is activated. when I start windows, of course no MacBook drivers are installed, so I have only a minimum of functionality. Now I want to start the BootCamp to install the drivers. But if I start "Setup.exe" it's ending immediately with: There were errors... before Boot camp could be initialized.
    I downloaded the newest BootCamp (3.1) and start it, the program crashes!
    I can't get it working!!! What have I to do - please help me!
    I use Windows XP Home SP2.
    Thanks!

    If you didn't try installing Boot Camp from your OS X disc, try that first.
    From what you wrote it sounds like you somehow cloned your old install of windows over to a fresh partition. Depending on how you did this, the problem might lie here.
    First, what version of OSX are you running?
    If your MacBook Pro is new, it should come with Snow Leopard, which wouldn't explain the problem.
    How exactly did you clone windows over?
    Depending on how you cloned windows, your easiest solution might be to back up any files and applications you need from windows, remove the current Windows partition, and create a new partition and installation of Windows through Boot Camp on OSX. Normally Boot Camp should install its drivers after a successful installation of Windows.

  • Cannot Access Time Capsule Disk from Boot Camp

    Hi,
    I've set up a Time Capsule and I've been able to read and write from:
    1) My MacBook Pro and another MacBook
    2) A Windows XP (SP3) PC connected by Ethernet
    3 )A Dell Laptop running Windows XP (wirelessly)
    I can copy files to and from the disk and perform Time Machine Backups (on the Macs).
    However, I have not been able to even connect to the disk (but I can use the internet normally) on the Time Capsule on my MacBook Pro Boot Camp Windows XP SP3. I can connect wirelessly and surf the net on the 5 Ghz (and 2.4 Ghz) (non-public/Guest Shared) network. (The password I entered to access the disk are the same on all machines listed, which was not confused with the Network Password) Does anyone face such a problem or know the cause/fix?
    Thank You in advance.

    I use FileBrowser app. It works. Their latest version is much easier to configure than earlier versions. You need to turn file sharing on and SMB on your time capsule disk.
    I use the time capsule disk to store a few files which I never want to be on my iPhone or iPad, but do want access to them. They are not backed up on the time capsule but since they also exist on my Mac, they are backed up from there.

  • Problem with boot camp

    Hi, how are you all
    I have a problem since 3 months
    I tried something in boot camp and ended up doing something wrong
    Now every time I want to start my iMac I need to hold alt and choose MAC, or else it will take me to black screen that shows "no driver found to boot...."
    I thought it wasn't that big deal, I don't need windows anymore, and it is not that hard to hold alt key while imac starts
    but today I tried to install windows, because I upgraded ram to 12gb and wanted to try them, but I couldn't
    I did devoid the hard disk successfully, but when I want to install windows 7 the computer restart, this is normal I know, but then it takes me to the white screen again where I can either hold down alt button and it will take me back to snow leopard, or don't hold any key which will take me again to that black screen I mentioned before
    This is really frustrating
    I live in UAE so there is no apple store here, and no offense but every authorized apple reseller has stupid people that don't know a bit about MAC, just hired to sell with no knowledge, I asked them about the problem and no one knew what I was talking about and brought the imac and no one knew how to solve it.
    So hopefully ill find answer here
    Please if you know the answer tell me, want to try the RAM
    Thanks, Ahmad

    Redo your install.
    As in Boot from Windows 7 and do a clean install, format the drive which is already NTFS.
    Installation Guide Instructions for all features and settings.
    Boot Camp FAQ Get answers to commonly asked Boot Camp questions.
    Windows 7 FAQ Answers to commonly asked Windows 7 questions.
    Discussions forums Discuss Boot Camp topics with other users.
    Troubleshooting
    iMac displays a black screen during installation of Windows 7
    Symptoms
    When installing Microsoft Windows 7 on an iMac (27-inch, Late 2009) and iMac (21.5-inch, Mid 2010) using Boot Camp, a black screen may appear. This can happen because the Windows 7 installer does not include the necessary graphics or Bluetooth drivers for your Mac.
    http://www.apple.com/support/bootcamp/
    Pay attention to any Apple tips and articles above that deal with your Mac.
    Have your OS X DVD ready for after Windows is installed.
    Tip: Most geniuses have mixed or limited or wrong information about Windows and installing on Mac, using Boot Camp tools. The above page and articles are good starting place, should be directed to when questions come up.
    And take everything with a grain of salt. Good luck.

Maybe you are looking for