HDD/RAM upgrade question - 400 mhz sawtooth

Hello!
My Sister has a Sawtooth G4 - Well, I believe it's a sawtooth anyway. I don't know for sure, so I'll post a bunch of specs:
It's a 400mhz model, early 2000. It shipped with a 10GB HDD, and 128 RAM. I believe it also has a 100 Mbps Ethernet. It has a DVI and VGA monitor video card, but i'm not sure the Video RAM level. It has an internal FW 400 port as well. The internal Airport card is shot - er, maybe the extension.
It has major issues with the system - and it seems to stem from a botched OS 9.2 install. It's running 9.1, but with trouble. For one, I can't open the extension manager. For two, it's slow, and acts funny.
Well, I thought i'd be nice, and try to get the G4 working for my Sister. It seems that it may require an Clean install of OS 9.0. Oh well, I can do that easily enough. However, before I go through all that trouble, I'm contemplating upgrading the hard drive (at least). With only 10GB, it's not very useful for iTunes, Photoshop, or our old OS 9 games - things she'd like to have.
I looked at the specs for the Mac at:
http://www.lowendmac.com/ppc/g4saw.shtml
It takes an 3.5 inch Ultra ATA drive? I've seen those around - and a 60GB drive or so is becoming pretty cheap. (I've seen 80G for under $50) I just figured i'd ask if anyone has tips on what to buy, how to install it, and Particularly if I need any special adapters for the G4. It does have a slot for a second internal HDD. I've also heard that a fast, second internal HDD can overheat the computer - is this a common issue I should be worried about?
The same questions go for the RAM. I'd like to add at least an extra 128MB, but I'm not entirely sure what to get. The above site mentions that it uses PC100 SDRAM in DIMM mode? Hmmm... I'll have to look around.
Please excuse any silly questions, I'm just far more familiar with more current systems, and it's 1 AM
Thanks,
Dan
PS: It looks to have a slot for a floppy drive under the DVD-ROM drive. I have a bunch of files on our OLD PowerBook 5300 that i'd like to move - but I need a floppy drive. Our old external USB floppy drive is.... very dead. The external floppy drives i've seen at stores seem to be pretty expensive, but internal drives are still fairly cheap (some under $30). How hard would it be to find/buy/install a compatible floppy drive? What format would it need to be? If such an upgrade runs over the $40-50 that a new USB drive costs, it's not really worth it.
15" Powerbook G4 (May 2005 ed), iMac DV (9.2.2)   Mac OS X (10.4.6)   1G Ram, 192 (iMac)

Wow, thanks again!
I figured out that this is the AGP graphics Sawtooth - not the Yikes model. Where do these names come from?
As per upgrading to OS X - we have a G5 which she can use, and a XP box - which is down with the flu for the third (or fourth?) time. Therefore, the G4 will stay OS 9. She just wants to have a reliable machine that can play DVDs and music, and play some of our old OS 9 games. It's not intended to run any new programs, just the old ones that she can't run now. When I mentioned photoshop - it's a "Limited edition" of version 5.0 - and it's far, far, FAR more reliable on the G4 than on our 2-year-old XP box, despite the G4 running 9.1 with a wimpy 128 meg ram!
The main reason for upgrading the HDD was to make it more practical for games and MP3s - via iTunes 2! It won't play AAC, but it plays MP3s fine. She has at least 8 Gig of music - too much for a 10G drive! (Even half of it leaves precious little expansion room)
I'm watching for a "small" HDD - it seems that our local Fry's is no longer selling anything smaller than 100G - which was $100! Or perhaps they were just sold out at the time. I'll keep an eye out for another sale. In fact, asking my friend for an old drive is a good idea. They have parts from at least a dozen old windows and linux boxes floating around - so they likely have a drive or two. If it's a used HDD, loaded with Windows (probably 95-2000), will it confuse the system before re-formatting?
As per RAM:
I'm quite aware of the lack of RAM. However, I'll have to watch for sales! I'm not aware of any "Mom and Pop" stores close by, although that's a fantastic idea. A PC 133 128 MB card runs $40-50 at the local computer stores, but only $15 at OWC! Therefore, if I don't find suitable RAM locally, I'll order some. I wouldn't mind an extra 256 (or 512) for my iMac either.
Speaking of iMac - I've determined that it's the iMac DV Special ED from March 2000. (400mhz, originally 13 Gig Drive - now 60, 9.2.2) The question is whether or not it maxes out at 512 MB or 1 GB of RAM. One of the Apple support sites I found ( http://docs.info.apple.com/article.html?artnum=58007 ) said that the slot loading iMacs max out at 512. It makes no distinction between any slot loading iMac. However at http://www.lowendmac.com/imacs/dvse.shtml, it mentions that this model specifically can accept 1 gig of RAM. I'll assume that the Apple article is correct, but I'd love to get a full 650 MB if I can! (I'd love to add a 512 to the 128 I have now)
It's amazing, really - after 4 years of constant use, a hard drive motor failure (hence the 60G HDD), and a year and a half burried on a desk, the iMac is becoming more handy by the day. It's good at capturing the Video and audio from say, Halo, while my PB's too busy to run anything else (via S-Video and audio through our DV cam). It makes a great DVD player, an iTunes Jukebox, and game machine - most of my games are still OS 9. To top it off, it makes a great wireless base-station for my Nintendo DS at school, where there's no WiFi! With 30 gig of space left on the HDD, it has plenty of room for whatever I want to do with it. Guess you can "teach and old dog new tricks!'
Well, I guess this means my question is answered for now - once I find the things I need, i may have some more questions, Thanks again!
-Dan

Similar Messages

  • Upgrading G4, 400 MHz Sawtooth Video Card

    I know this has been addressed but I can't find the answer to this question:
    I have a 400Mhz G4 Sawtooth
    20" Cinema Display
    I want to buy a video card that supports latest OSX iMovie, Quick Time etc...
    What do I buy?

    The reason I need a new graphics card is so I can use iMovie and Quicktime, on my computer in iTunes movies do not work at all (Yes, I have the latest edition of Quicktime Pro)
    The latest OSX (Tiger) has included things within its iMovie rendering software which simply will not work unless you have a Quartz Extreme compatible graphics card - These include: Themes, Ken Burns Photos and Video FX. Believe me, the problems that countless people are having with the latest versions of iMovie are most likely caused by not having this Quartz Extreme Compatible card.
    Since I use iMovie a lot and have a need to view certain graphics and movies on my display while trying to render them - My computer, as it is, has become obsolete.
    I knew this day would come - It always does - I just do not have the money, right now, to buy a new Mac.
    I also know that the Intel Core Due is going to be upgraded to a much faster processor - the recently released Intel Quad processor is on the table as Apple's new "Must Have" upgrade... I also know, from experience, that soon after the Christmas rush of buying Apple products is over, What was the latest & greatest is suddenly obsolete.
    Thank you for all of your help.

  • Another RAM upgrade question

    Hi everyone,
    I know there seems to be lots of RAM upgrade questions here but hey thats what forums are for.
    I'm looking to upgrade my macbook's RAM it's currently got 2GB (2x1GB)
    Is it possible to purchase 1x4GB and put that with one of my current 1GB sticks to create a total of 5GB?
    I would be interested to know if this is possible or if anyone has tried it.
    Thanks in advance
    Scott

    This will work if your MacBook is late '07 or newer.

  • HDD and RAM Upgrade Questions...

    I am thinking about upgrading my HDD and memory. My computer is a Qosmio X870-BT3G23. HDD is about 1TB and also have 12GB RAM. I am not sure how to upgrade my RAM as I heard the other 2 memory slots are not user accessable. How would I go about upgrading HDD and transfer all my stuff over? I think my computer has slots for 2 HDDs, but not sure... Thoughts on both HDD and RAM upgrade appreciated 
    Qosmio X870-BT3G23

    Skeet, here are the SPECIFICATIONS for your machine if you have not seen them.  And on pages 44-53 of your User's Guide is a very thorough description of the adding memory process. As far as transferring files are concerned, at the Start screen, type Easy Transfer, hit Enter and follow instructions.
    The specifications indicate you can have 16GB memory in the two accessible memory slots without concerning yourself about the 2 hidden slots. I personally can't imagine why anyone could need more than 16GB memory and 1TB HDD but, of course, that's your call.
    C.B.
    Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

  • What OS can I upgrade my 400 MHz DVD G3 iMac to?

    I have a 400 MHz DVD G3 iMac currently running OS 10.2.8. I have 640 MBs of RAM. What is the most current OS I can upgrade to? Thanks for the help!

    The posting proceedure can be a little confusing if you are not used to the forum.
    In the future if you go to the top of the page and click on > Using your iMac (CRT), for example and post there, more folks will see your question. (Some responders here could move posts in the past - 'not sure if that still applies).
    To install Tiger on your machine you will need 256MB RAM minimum (I'd double that). Be sure you use a "Universal" install disk. Don't try to use a "Machine-Specific grey disk. It won't work.
    Although external drives are useful, you don't need one to install Tiger.
    David

  • Desktop RAM upgrade questions

    Hi, I have hp elite m9000t series desktop with 2 GB(1 x 1GB) ram and as per the specs and research in hp website it can support to 8gb. RAM is of DDR2-SDRAM (pc2-5300 / 667 MHZ) type. I have 2 more slots open, so guess that can add 4gb(2 x 2gb) of ram. Question is 1) do i need to buy the sam ddr2 667 mhz ram or can i go to higher speed models? 2) is it compatible to have 2 slots with 1 gb  each and another 2 slots with 2gb ram each? 3)what is the recomended RAM for window7 better peformance? i am planning to install VMware to do other OS like linux, etc.. given that i may need more RAM. Please suggest me on the memory upgrade..I am seriously looking towards windows7 release date, i am very much disappointed with vista, cant wait for windows 7.
    btw, i am planning to upgrade to 64bit windows 7 professional, currently i am running with home premium 32bit.

    It's best to install RAM which is just like the one you have right now, i.e. pc2-5300 / 667 MHZ. In fact, I would recommend using RAM from the same manufacturer as the one that is currently installed. Each slot should have the same amount of RAM. So I suggest you use 1+1 or 2+2 rather than 1+2. Since you'll be using VMWare(hope your processor supports Virtualization), I suggest you go for 2+2.
    Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"
    I am an ex-HP Employee.

  • Mac MiniRam PPC RAM Upgrade question

    Planning to upgrade my 1.42 Ghz PPC based Mac Mini. Can I use 400Mhz DDR RAM on the mini> I know they said that we should use PC2700 (333Mhz).DThanks

    I have the same model as you. It has 1 GB PC3200 400 MHz memory and runs fine.
    crucial.com have decent prices and guarantee compatibility.

  • Basic RAM upgrade question

    Hi,
    I've read a lot of threads on ram upgrades, but still have a very basic question. I want to buy the $599 Mac Mini, which comes with 1G RAM. Clearly, the Mac RAM is overpriced, but I've been told by a friend to upgrade to at least 2G for $50 extra. I realize Crucial and others sell it cheaper, but I don't know about my ability to put it in.
    Is it worth another $100 to go from 2G to 4G. Will I see a noticeable performance increase if I'm using iMovie, Photoshop or Final Cut Express? Or surfing? Are we talking about a few extra seconds when rendering video but no other noticeable effects? I plan to keep this machine for our family machine now that my child is using iWeb.
    I'm sorry if this has been answered, but I'm on a very tight budget and worried about my job in this economy. Thanks for your help.

    If you are on a tight budget and have any concern about on-going warranty support for a new mini, then it is a better proposition to buy the $50 upgrade to 2Gb from Apple than to do the RAM upgrade yourself and go to 4Gb for little more. It's not that the upgrade is particularly difficult because it isn't, but if you are not reasonably confident in your skills and something goes wrong, Apple could declare the warranty void due to the work you've done on the inside of the system.
    There is a notable performance gain to be had from 4Gb as opposed to 2Gb, but much of the difference is less than obvious, particularly if you are careful about what apps you have running at any time. Running Photoshop, for example, would cause the system to slow down if you then launch another major app such as iMovie, but running it alone in 2Gb RAM would give you respectable performance. Final Cut Express isn't particularly demanding on the system so should run well, as would the vast majority of Intel-native applications. It's only if you are running any non-native processes (applications, drivers etc) that 2Gb would prove notably limiting.
    If it were me, I'd probably opt for the base model, buy 4Gb RAM from Crucial and do the upgrade myself. Next choice would be the base model, buy the RAM from Crucial and have a local Apple Approved Service Provider do the work for me - some AASPs charge a reasonable fee for this. Third choice would be to buy the base model with Apple-supplied 2Gb RAM and then at a later time replace that with 4Gb from Crucial as and when funds and circumstances reasonably permit it.

  • Some RAM upgrade questions

    I have an Imac which i purchaswed in Nov. 2007 with 1 gb of RAM. Am looking to add more ram and have the following questions:
    I am thinking of adding another 2 to give me a total of 3. Would this work.
    Does the ram have to exactly match (manufacturer) of my original Apple ram.
    I see ram from OWC, crucial, Ramjet, etc. Any positive or negative experiences?
    I am looking at getting 2 gb of ram from crucial and adding it myself.
    thoughts??
    THANX

    I see ram from OWC, crucial, Ramjet, etc. Any positive or negative experiences?
    I am looking at getting 2 gb of ram from crucial and adding it myself.
    thoughts??
    I did exactly the same thing as you: I purchased my iMac online in November 2007, with the minimum amount of RAM installed so that I could do my own RAM upgrade later. I then ordered 1 GB of RAM from Crucial, and I must say that their prices are superb, not to mention their excellent service and speedy shipping. Because I live in Canada, I had to pay customs duty, but the final price was STILL much less expensive than any other Canadian RAM dealer, let alone the astronomical prices on Apple's web site! In my humble opinion, Crucial is highly recommended.

  • MS-6738 (KM2M Combo-L) RAM Upgrade Question

    Hi
    I have the MS-6738 (KM2M Combo-L) Motherboard.  At the moment it is running 512mb of RAM and I would like to upgrade to 1gig.
    I do not know the make of the RAM in place at the moment because it was there when I bought the PC, but Aida tells me this:
    FSB - Real Clock 133mhz
          - Effective Clock 267mhz
    Same goes for the RAM, 133 and 267.
    I have read into the gambles involved in mixing RAM makes, etc, but I am prepared to take this gamble (first and maybe only time!) but according to http://www.crucial.com/uk/store/listparts.asp?Mfr%2BProductline=MSI+%28Micro+Star%29%2B+Motherboards&mfr=MSI+%28Micro+Star%29&cat=&model=MS-6738+%28KM2M+Combo-L%29&submit=Go the board is compatible with DDR PC2100 and DDR PC2700, yet it reccomends (actually GUARANTEES) that the Ballistix DDR PC400 will work.  Is this correct?
    What do you consider the best option to be for an upgrade.  I can either get another 512 of the same speed (DDR PC2100??), or if it will effectively run DDR PC3200/400 then I will go for 1gig of that instead (Athalon XP 2000+).  Please let me know what you think.
    Thanks in advance for any useful posts!

    Thanks for your replies so far.
    I have read that this board suffers from problems when running more than one stick of RAM, as such I am tempted to just take out the old 512 stick and replace it with a single 1gig stick.
    The bigger question I have is whether going for a higher speed of RAM (like available and guaranteed to work on Crucial), say DDR PC3200 would have any significant effect on system performance (World of Warcraft is a major RAM hog). 
    The RAM prices are as follows:
    1GB — CT12864Z335 DDR PC2700 CL=2.5 NON-ECC UNBUFFERED £117.99 ex. VAT (ea.)  £138.64 inc. VAT* (ea.)         
    1GB — CT12864Z265 DDR PC2100 NON-ECC UNBUFFERED £125.99 ex. VAT (ea.)  £148.04 inc. VAT* (ea.)         
    1GB — CT12864Z40B DDR PC3200 CL=3 NON-ECC UNBUFFERED £133.99 ex. VAT (ea.)  £157.44 inc. VAT* (ea.) 
    As you can see the PC2700 is cheapest, but the original mobo spec states DDR PC2100 as the highest (although the official site just says 184 pin no max speed was quoted).
    Therein lies my question, would there be any point in spending the extra £20 on PC3200 when the system FSB is only 133mhz?

  • Compaq Presario V3641AU RAM Upgrade Questions

    Hey guys,
    Before I go out and buy some RAM to upgrade this aging laptop, I was just wondering how much RAM the system supports. I've done some Googling and find that some sources state 4GB max, whereas others state 2GB max. I always imagined it was a 2GB max but according to the following HP site it says 4GB. If it's 4GB I will go and buy 2x2GB sticks otherwise it will have to be 2x1GB sticks. Has anyone done this before?
    http://bizsupport1.austin.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01423492&lang=en&cc=u...
    http://www.upgradeable.com.au/hp-compaq/presario-notebook-v3641au.html
    Thanks
    PS: Can I use RAM that is clocked higher than the recommended as some of the shops don't sell DDR2 667 anymore? One shop near me sells DDR2 800, will that be OK to use?
    This question was solved.
    View Solution.

    Hi:
    Please see the service manual at the link below.
    http://h10032.www1.hp.com/ctg/Manual/c01154809.pdf
    See chapter 1, page 3.
    Because your model has the AMD processor, you can install 2 x 2 GB of PC2-6400 memory (4 GB).
    The manual says PC2-5300, but I know for a fact that the chipset can run the memory at 800 MHz, so you may as well bump up the speed of the memory too.
    And even if it doesn't, the PC2-6400 memory would just downclock to 667 MHz, so you have everything to gain and nothing to lose.
    I have the same chipset in my dv6810us and I swapped out the memory to 2 x 2 GB of PC2-6400 and mine runs at 800 MHz.  I have the Turion TL-60 processor.
    Cheapest place to buy memory, IMO and here are my recommedations FWIW.
    http://www.newegg.com/Product/Product.aspx?Item=N82E16820231156
    http://www.newegg.com/Product/Product.aspx?Item=N82E16820148159
    http://www.newegg.com/Product/Product.aspx?Item=N82E16820134831
    Paul

  • RAM upgrade questions.

    Hey guys. This is my first thread, and quite honest, I'm not sure if I'm at the right place at all.
    Oh, well.
    I'm a proud owner of an (maybe older model) MSI GE60 2OC.
    It came with:
    Intel i5-4200M 2.5 GHz
    6GB ram
    GeForce GT 750M 2GB
    500GB hard drive
    - and some other cool stuff! :D
    However, I find my computer quite slow. And the "only" things I could "blame" would be my ram and perhaps my hard drive.
    So, I was wondering if it's possible for me to upgrade my current 6GB to 8GB (or more?) and if so, how is that done? (Thinking about finding the proper ram kit).
    And also, while at it, I'm sure it would also help getting a SSD?
    Sorry for the confusing questions - but I hope you guys can help me out :-)
    Thanks in advance!

    Upgrading the RAM is fairly simple. It can take up to 16GB (2 x 8GB) of DDR3-1600 or DDR3-1866 Unbuffered NON-ECC 1.35V modules. To install, you'll have to remove the back plate of the laptop (there will probably be a warranty sticker that you'll have to break to do so) and swap out the RAM that is installed.
    As for the SSD, the GE60 will have a 2.5" HDD installed, and it should have an open slot for an mSATA SSD as well. You could either replace the HDD with a 2.5" SSD, or just add in an mSATA SSD. You'll need a cloning utility (such as Acronis True Image) to clone your current HDD to the new SSD, so you can retain all of your data and the recovery partition.
    If you want to replace the HDD with a 2.5" SSD, you'll need to make a full disk image of the drive, restore it to the SSD, then swap the drives.
    If you want to add in an mSATA SSD, I would recommend cloning your OS partition to the mSATA to use as your boot drive, then format the OS partition of the HDD and use that partition for data storage. Just be sure to leave the recovery partition intact on the HDD. If you don't need to clone your current OS partition and you're okay with having a clean slate, you should be able to run the recovery from the HDD and reinstall the OS to the mSATA.

  • Macbook C2D late 2006 RAM upgrade question.

    Hello everyone,
    I have a late 2006 Macbook and am planning to upgrade the RAM from 2GB to 4GB.
    From what I understand, my motherboard only supports 3GB, and I'm ok with that.
    My question is:
    Because 1GB will be left unused, will the OS use any of the extra GB towards my Intel GMA 950 GPU's 64MB of shared memory?
    I know the machine performs better graphically with with 4GB of RAM rather than 3, I was wondering if that extra GB of RAM is just used my my GPU rather than by the computer?
    Like, will I get more then 64MB of shared RAM?
    Thanks for reading, and I hope someone here has the same configuration as me, has added the 4GB, and could tell me if there is any GPU upgrade with the 4GB.

    Aaron Lowe wrote:
    Because 1GB will be left unused, will the OS use any of the extra GB towards my Intel GMA 950 GPU's 64MB of shared memory?
    No, the GMA 950 shares the 3 GB. Some have reported after testing that the MacBook is actually using 3.3 GB.
    I know the machine performs better graphically with with 4GB of RAM rather than 3, I was wondering if that extra GB of RAM is just used my my GPU rather than by the computer?
    Like, will I get more then 64MB of shared RAM?
    This is from the specs.
    +Memory available to Mac OS X may vary depending on graphics needs. Minimum graphics memory usage is 80MB, resulting in 944MB of system memory available on 1GB configurations.+
    The 64MB is a baseline because of the GMA 950 spec. The MacBook actualluy uses more and more is assigned as needed by the graphics.

  • M2N68-LA (Narra 5) Ram upgrade question

    I hope someone can help me here;  anyways, to start out with, the M2N68-LA motherboard has a Phenom II X4 945 cpu and 4GB of PNY optimima pc2-6400 running at 1.8 volts on a Win 7 64 bit OS.  What I would like to do is upgrade the Ram to 8GB of Patroit ram (2x4gb). Would this be possible on this type of board?  If not, what is the max voltage the motherboard can handle because PNY also has 4GB of XLR8 ram with  CAS4 @ 2.0 volts that I would to get incase the Patroit can't be used.
    Thanks ahead of time
    This question was solved.
    View Solution.

    Hi:
    No, the board will only accept maximum RAM chips of 2 GB, and there are only 2 slots.
    What HP is referring to is that a 32 bit OS will not be able to utilize all 4 GB of memory. I am not so sure a 64 bit OS would either on a PC that can only support a max of 4GB. No matter what, some memory is reserved for system hardware.
    Paul

  • RAM upgrade question

    When I ordered my laptop a few years ago it came with 4gb RAM standard, but you could upgrade to 6GB up to a max of 8GB. I bought it with 6GB. I want to upgrade to 8GB, and I know there are 2 RAM slots in the laptop. My questions is, did they use a 6gb stick in one of the slots or did they use a 4gb in one and a 2g in the other? Im hoping to get an answer so I dont have to open it up and look for myself. I dont know if I should order a 2gb or a 4gb stick to get it up to 8gb.  With that being said, does anyone know if HP would put in a 6gb stick or run a 4gb and 2gb together? Im assuming they put in a single 6gb and I would just need to buy a 2bg upgrade. Thanks  Also, would it run better if I just replaced all of it and got one stick of 8gb RAM?

    Welcome to the forum!
    Yes, you can add 1Gb of PC2700 RAM to the empty slot in your machine, and it will work just fine.
    Hope this helps.
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Maybe you are looking for

  • Depot Sales-Excise values are not flowing from J1iJ to VF01

    Hi Gurus, In Depot Sales: while doing excise invoive from T-code J1iJ Go to delivery -RG23D selection select the delivery number XXXXX Excise Group 51 and series Group: 50 ENTER - select the line item and click on F6 and here we have to click on exci

  • Turning into a Dinosaur

    There was a time when Apple Computers and Software just worked. It was great to have a Mac because everything ran smoothly without ever running into any problems. It seems to me like Apple is becoming to big, slow (not enough employees) or whatever s

  • Some problems about QuickTime 7

    Hi,can QuickTime support video files encoded by H.263 or H.263+? Can it read *.avi files? I tried in the Windows XP but failed... Need I purchase the serial key and update the QT 7 to the Pro Version? Thanks.

  • On elements 11 organizer how do you display file #

    On elements 11 organizer how do you display file # for each photo?

  • Open Maverick Numbers Document on iPad

    My wife is unable to open Numbers documents on her iPad (iOS 7) that I have created for her on my iMac (OS 10.9 Mavericks). Message says 'Spreadsheet can't be imported...   ...created with an unsupported application version'. She has downloaded the l