HDD Recovery Mode not working

I have a Toshiba Netbook (NB205-N330BL) that will not start.  It shows the Toshiba splash screen then goes directly to a command prompt screen, but will not allow you to type anything at the prompt.
I tried entering HDD recovery mode by holding down zero(0) during startup.  The netbook will not go beyond the splash screen unless I release the '0' key briefly and press again, then it goes to a command prompt screen with "***** HDD RECOVERY MODE *****" displayed at the bottom of the screen, but will still not allow you to type anything at the prompt and will not respond to any other keys.
Am I doing something wrong? How do I get from there to the warning screen described in the user manual?

Hi there lsnowden!
I have a couple of articles here that I believe will help you resolve this issue with your Mac. The first article addresses a few different startup issues that can be solved by using Disk Utility, and can be found here:
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
http://support.apple.com/kb/ts1417
If you only get a grey screen on startup and can't get past that, then you may want to check out this article as well:
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
Thanks for using the Apple Support Communities. Have a good one!
-Braden

Similar Messages

  • Satellite L745D-S4214 Does not boot; HDD recovery partition not working

    I tried to apply the recent windows 7 updates and my laptop no longer boots.  I tried to press F12 and select the HDD Recovery partition, but it does not boot regardless.  There is a message that it does not communicate to a specific device.  I believe the address called out was 0xc0000e9, but I am going by memory.  I never created a recovery CD because I thought I was covered by the HDD partitions.  This was purchased on 10/26/2012, so it should still be under warranty.
    PLEASE HELP!

    Hi I'm going to assume that your recovery works like mine and that the recovery partition is still good and not corrupted.
    Shut down your PC. Press F12 and select HDD recovery. Click enter. This should start the recovery from the hidden recovery partition.
    PS I would advise you to make the recovery discs or USB recovery Try this first.
    Perform a power cycle
    Even when your laptop is off and unplugged, residual power can still be held in some components. While this is normal, clearing it can help with boot problems. Perform these steps to complete what’s called a power cycle.
    Ensure the laptop is turned off.
    Unplug the laptop's AC power cable.
    Remove the battery (if the model has a removable battery).
    Unplug all wires or peripherals. This includes CDs, DVDs, USB sticks, mice, printers, and any other accessories.
    Hold down the power button for thirty seconds.
    Reattach the battery.
    Connect the AC adaptor to the power socket that was confirmed to be working in the first step.
    Connect the other end of the AC adaptor to your computer.
    Try starting the computer.
    If your laptop starts normally now, you're done!
    I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.

  • IPod Touch stuck in a cycle between Apple logo and loading sign, recovery mode not working.

    I have a 4th generation iPod touch (I think it's 4th gen) and it is stuck in a vicious cycle. It started by just randomly crashing while I was using it (many of the apps were not functioning properly beforehand). It went to the Apple logo for a little while, and then went to a loading sign for a few minutes. Suddenly, the screen flashed white, and appeared to be turned off. Then it turned back on to the black logo, and the cycle began again. i have attempted many times to put it in Recovery mode, but when I hold the Home and Sleep/wake buttons, it "turns off" but only for a few precious seconds before beginning the cycle again.
    Another thing, I never downloaded iOS 6 because I didn't want to lose the old YouTube app. That may be a hindrance.
    At first I wondered if it could be a virus, but now I don't think so.
    I am very sentimental about this iPod, and I have a lot of pictures and high scores on it that I would prefer not to lose, if possible, however, I'd rather lose that than the whole iPod. I will gladly go to the Genius Bar, but I wanted to see if anyone on here could help me out first.
    Any ideas on how to get it working normally again?

    I helped someone earlier who had the same problem. https://discussions.apple.com/thread/3374810?

  • Resetting a disabled iPod Touch 5th generation through recovery mode not working.

    I bought a disabled iPod Touch 5th generation at a garage sale. I looked up how to reset it and followed every step given and it was working. It said there were about 82 minutes and it was restoring for about until 70 minutes and then a pop-up comes up saying it can't restore it because it has a password on it! Please help me.

    Try disabling the computer's antivirus and firewall.
    - Next try the manual install method of:
    iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
    Place the iPod in recovery mode after the firmware download is complete and then restore using the instructions in the article. Sometimes recovery mode timeouts and returns to disabled before the firmware download is complete.
    - Then try on another computer

  • TS1363 i phone 4s in recovery mode not working cut off from the planet

    does anyone out there know how to resart when the i phone constantly asks to be plugged into i player and i player asks for you to get out of recovery mode?

    Hello agardner37701,
    I found some steps you can take when your iPhone is not recognized by iTunes when in Recovery Mode.  I recommend reviewing the steps in the section titled "If the device is not recognized while in Recovery Mode" under step 5 in the following article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • IPhone 5s recovery mode not working AND itunes wont connect phone!

    I opened iTunes whilst my phone was plugged into my pc via USB and was told to update the software so I did.
    During the process of updating I noticed my phone screen was an image of a usb pointing to an itunes icon.
    I researched what the symbol meant and why i couldnt turn my phone back on and found out i need to do the recovery instructions.
    THEY ARE NOT WORKING.
    I have tried many times but iTunes is still not noticing that my iphone5s is plugged in.
    PLEASE HELP ME!
    Thanks.

    Hello bekahxi,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    Have a nice day,
    Mario

  • Forgotten passcode and recovery mode not worked?

    My sister was using my iphone for games and somehow made a passcode, she doesnt know what she did to do this and now we cant get into the phone, we tried with recovery mode and it seemed to do the trick until it finished and then returned back to the passcode screen. help me please!

    Then you never really got into recovery mode, it can take several attempts. Read here:
    http://support.apple.com/kb/HT1808
    Or, login to iCloud.com from any computer, locate the phone, then erase it.

  • HP Pavilion dv6-6181TX. System Recovery is not working From HP Recovery Manager.

    HP Pavilion dv6-6181TX
    Product No. A3U49PA
    Genuine Windows 7 Home Premium 64
    (but i upgraded it to windows 7 ultimate)
    System Recovery is not working From HP Recovery Manager. so i cant restore my laptop to its original factory condition. (Genuine Windows 7 Home Premium).
    so when i restart my computer and press Esc and then choose F11 i get this message :
    "Windows failed to start. A recent hardware or software change might be the
    cause. To fix the problem:
    1. Insert your Windows installation disc and restart your computer.
    2. Choose your language settings, and then click "Next."
    3. Click "Repair your computer."
    If you do not have this disc, contact your system administrator or computer
    manufacturer for assistance.
    File: \Boot\BCD
    Status: 0xc0000225
    Info: An error occured while attempting to read the boot configuration data."
    i saw this from the forum
    http://h30434.www3.hp.com/t5/Notebook-Recovery/Hp-recovery-manager-problems/m-p/2395473/highlight/tr...
    Had the C partition been split/shrunk to form a new partition previously?
    Does disk management show the HDD as basic or dynamic? (Start>Right-click Computer>Manage>disk management on the left).
    If it has been switched to dynamic (Windows does this automatically when more than 4 partitions are present on the disk), then the F11 recovery partition won't function until it is restored to basic, but I would like to confirm that is the scenario before providing those steps.
    The Disk management shows that my HDD as Dynamic, what should i do then if this is the case and the possible solution to my problem?
    please help me & Thank you for your time,
    This question was solved.
    View Solution.

    If you have more than 4 partitions you will need to delete the extra partition/partitions, then convert the hdd back to Basic.
    Older versions of Partiton Wizard Free work: 
    http://www.sevenforums.com/tutorials/26829-convert-dynamic-disk-basic-disk.html
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Ipod is in recovery mode not restoring

    ipod is in recovery mode not restoring

    - What happens when you try to restore? Error messages?
    - Try placing the iPod in DFU mode and then restore.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • My HP Pavilion dv6-2153ee recovery is not working when i choose it from boot menu selection

    my HP Pavilion dv6-2153ee  recovery is not working when i choose it from boot menu selection . it's run but then the windows run without running recovery. help me please?

    Hello Tajamal, 
    Welcome to the HP Forums!
    I understand the webcam isn't working since upgrading to Windows 8.1. I would have to suggest returning to Windows 8 since there are no 8.1 drivers, as indicated here: HP Pavilion dv6-7043cl Entertainment Notebook PC Drivers
    Please let me know if you have any other questions.
    Have a wonderful day! 
    Mario
    I worked on behalf of HP.

  • Widgets on my desktop using dev-mode not working in Lion

    I'm trying to get iStat back ontop of my desktop like I had in Snow Leopard. Dev-mode not working to bring widgets forward anymore. Any Ideas how to do this in lion? In Snow Leopard it was defaults write com.apple.sashboard devmode YES now that isn't working.

    When I connect my MBP (mid 2010) to iMac 27" (mid 2010), via Mini DisplayPorts, after pressing Command+F2, iMac screen went "blank" while MBP screen stays "blue" for few seconds and went back to normal. How to solve this problem?

  • Blue screen on start up. Safe mode not working?

    Blue screen on start up. Safe mode not working, any suggestions?

    Thank you, I had forgotten about target mode. I was able to back up all of my files. I also copied some additional 50 GB of files of the disk as a stress test and the hard drive worked fine and quick (and because it was quicker than retrieving the same files from a network drive to my desktop).
    I was hoping to also unpack the Applejack files on my desktop and put them back so I could run them in single user mode without running /etc/rc. However I haven't been able to get my Linux desktop to mount the iBook in Read-Write instead of Read-Only yet (I don't have access to another Mac at the moment).

  • Re: HDD Recovery isn't working

    Dear Toshiba,
    my laptop bricked and now i recovered it,
    during recovery it bricked again, and now there isn't a choice of repair your computer in the F8 Startup anymore
    How can i start hdd recovery now?

    The whole HDD recovery principle doesnt work on this way.
    Who should give you this command line? Toshiba software department maybe!
    Lets see if anyone here will be able to help.
    By the way: somewhere on this forum I saw one thread about similar problem. Try to find it in Toshiba recovery section.

  • I have a macbook pro with no OS, original install discs and internet recovery is not working.  Can I purchase an OS (like snow leopard) and install that onto macbook?

    I have recently purchased a macbook pro 2011 that does not have original install discs.  The macbook does not currently have an OS and internet recovery does not work.  Am I able to purchase an OS like Snow Leopard that actually has a disc and install it onto this macbook?

    Does your Mac meet the hardware specs for Snow Leopard?
    Mac computer with an Intel processor
    1GB of memory
    5GB of available disk space
    DVD drive for installation
    Allan

  • Satellite A205-replaced HDD and recovery CD not working; media test failure

    Please help,
    My wife's computer crashed, it all started with windows\system32\en file corrupt or missing. Took it in to the geek squad and diagnostics test said hard drive corrupt.
    (Trying to recover the data is another problem to solve later)
    To save money I ordered a new HDD (WD320GB) installed the new HDD, inserted the recovery disc and get the following message:
    Pre-boot execution Environment (PXE) v2.1
    PXE-E61: Media test failure, check cable
    PXE-M0F: Exiting PXE ROM
    Operating System not found
    I can see the new HDD in the BIOS, I've changed the boot order to start with CD/DVD drive but still get the message above.
    What now?
    Thanks for any help that I can get.

    I want to say thanks to all who helped. The problem with recovery CD's not working was the DVD drive.
    I was able to get a used DVD drive really cheap and was able to reinstall to factory condition.
    Just for kicks once the install and all updates were completed I stuck the old DVD drive back in and still didn't work. So other than alot of time online and looking around for a DVD drive that would fit the laptop, I spent less than $10 for DVD drive and $65 for another hard drive which is good news, the bad news is my wife couldn't live anylonger without Facebook and bought another laptop, HP this time.
    Well my daughter will have a Tosh to do her school projects.
    Now to figure out what caused the crash, loss of data and DVD not to work in the first place.
    Thanks again for all your help.
    Happy New Year

Maybe you are looking for

  • How do I use a LR5 catalog in LR4?

    I own lightroom 4 on one computer. I installed a lightroom 5 trial version on another computer for a trip I went on. I used lightroom 5 on the trip, keeping my catalog and all my pictures on an external hardrive. Now that my trial vertion for lightro

  • FF_5 : Electronic Bank Statement.

    Dear All, Need to get some inputs regarding t-code FF_5 (EBS). 1. When we import electronic bank statement (swift format) where is the entries are getting stored in the table level. 2. Can we create some customized field in the program through IMG, i

  • HT1349 Hello,I want to ask you,how long may the ipad2 charge at the first time?Thank you for your answer.

    Hello,I want to ask you that how long may the ipad2 charge at the first time? Thank you

  • How to identify my notebook model?

    Hi. I recently bought a used laptop, Toshiba Satellite A10. Now I am wondering, how do I identify its model number? The sticker underneath it says Model No. PSA10E-00KWY-SW (The "SW" is probably because it's Swedish. The zeros may be o's.) But when I

  • Shuffle playlist 'resumes' from the beginning

    Hi all. Does anyone know how to stop iTunes from causing an iPod Shuffle to begin playing from the beginning every time it is plugged in? I only use it on sequential settings, and have set to manually manage music in iTunes. I have around 72 hours of