HDD short and long test Freezes at 50%

The laptop kept crashing and new install of Windows 7 and then Windows 8 did not fix the issue. The 'run in' test passed the ram section, but froze at 55% of the HHD test. The longer HDD test also froze at 55%. I'm assuming that there is a serious problem in the mid disk space. I'm probably going to shrink the C: disk to maybe 25-30% will this avoid the area at 55%? It's not really justified, on cost grounds, to fit a new or even used disk in this system as there are cheap new more powerful systems around. However, a working allbeit small hard disk system, would be fine for my usage.

According to the message you have recently posted I would like to confirm that this could be a hardware issue and it looks like the sectors on the Hard Drive are being damaged. I strongly recommend you to immediately back up your data before the Hard Drive stops working completely. I recommend you to Contact HP Technical Support over the Phone for further assistance without any delay to get your Notebook diagnosed and serviced by an authorized HP Certified Engineer You can also Check your warranty Here to verify the warranty status Hope this helps, for any further queries reply to the post and feel free to join us again **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,K N R KAlthough I am an HP employee, I am speaking for myself and not for HP

Similar Messages

PO for item of service Level short and long text using sap script

Please let me know how to do the PO for item of service Level short and long text using sap script.
<MOVED BY MODERATOR TO THE CORRECT FORUM>
Edited by: Alvaro Tejada Galindo on May 5, 2009 10:25 AM

Hi ,
In the transaction related to PO select the path goto->header texts and then details of the texts like ID,objectname,language,name.Pass all theses details to 'READ_TEXT ' FM. Then you will get text lines described for a perticular Po ,similarly for item also.
Thanks,
Suma.

In ECC6,how to use tcode se63 to translate short and long texts?

In sap 4.6c, I know how to use tcode se63 to translate short and long text. However, in ecc6,when i use se63 to translate abap data element short texts, i cannot save it .A error message appare: Could not save target text Message no. SKTY000.
Can any body help me?

Hi,
This is because o source language must be different from target language.
regards,
Eduardo Marcelino

Short and long texts

Dear Experts,
I have many BW objects (like Infocubes, Infoobject catalogues, Infoobjects) for which no short and long texts are maintained in one language. Now, all these are in use in the production system. I have to edit the short and long texts for all of these objects. My intention on how to do it is to,
1) Logon to the Development system
2) Edit short texts manually for all of the objects.
3) Collect the changed objects in Transport organiser and transport to the productive system.
My only question is does we need to do any thing in the production system after transporting these objects for them to get reflected.
Any help and other thoughts are greatly appreciated...
Kind Regards,
Shravan

Transport Changes and that's all ...
Hope it helps
GFV

Reclassification of short and long term payables and receivables in ECCS

Hello,
Has anyone worked with reclassifying long and short term receivables and payables in consolidation? Or anyway of using the FI automatic reclassification for closings and be able to consolidate and make eliminations in any of the consolidation tools (ECCS or SEM BCS) between company codes already in SAP and companies outside SAP.

Hi,
Right. After the registry key is added, all new recovery points written to tape will show they expire at midnight (12:00am) on they day they expire so any tape jobs that run later that day will be able to use that tape after the expiry
date.
To prevent tape jobs from failing because there are no tapes available, you can also add this registry value.
During a new tape backup or if a tape becomes full and there are no other tapes marked free, Free (contains data) or expired in the library, DPM will raise an alert to prompt for another free tape to continue backup. The same is true during a
restore, if the needed tape is not in the library an alert will be raised. By Default, DPM It will wait for
1 hour before failing the job.
This prompting timeout can be configured by the registry entry “PromptingTimeOut” under “HKLM\Software\Microsoft\Microsoft Data Protection Manager\1.0\Prompting”
PromptingTimeOut:REG_Dword:43200000 (dec) = 12hrs
The Formula is (#hrs * 1000 * 60 * 60)
1HR = 1*1000*60*60 = 3600000 decimal
So for each hour to wait, multiply by 3600000.
8hrs = 28800000 decimal
Restart the DPMRA service.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights.

DPM 2010 Short and Long Term goals

My question is related to size restrictions.
Our existing DPM 2010 is setup with two protections groups, System State, and a Default (file) protection group. Both are set up the same. A co worker recently had to re-create a protection group due to his negligence and deleted it without looking at how
it was setup in the first place, since then I've been having errors in backing up to tape:
Synchronization frequency is set to just before recovery point
Short term goals are:
Recovery points are at 8:00 AM, 12:00PM, 6:00PM Everyday, Express Full is 8:00PM Everyday
Long term goals are:
Retention range 2 weeks, Frequency Weekly (1 recovery point every 1 week for the last 2 weeks)
Full backups are set to Saturday at 11:00 PM
Here's the thing, we have 3x3TB external drives that, historically have been swapped out weekly (Monday mornings, using Firestreamer for tape emulation). Since the co-worker broke, and re-created the protection groups, when we view DPM Console on Monday
morning, we see that the backup jobs are failing, the 3TB drive is full.
Could this 3TB drive be full due to this weekly swapping out when it is set to a retention range of 2 weeks? Obviously, it could be because the protection group actually contains that much data, but I'm trying to wrap my head around sync frequency, recovery
points and how that works into recovery goals.
Any help is appreciated.

Hi,
Right. After the registry key is added, all new recovery points written to tape will show they expire at midnight (12:00am) on they day they expire so any tape jobs that run later that day will be able to use that tape after the expiry
date.
To prevent tape jobs from failing because there are no tapes available, you can also add this registry value.
During a new tape backup or if a tape becomes full and there are no other tapes marked free, Free (contains data) or expired in the library, DPM will raise an alert to prompt for another free tape to continue backup. The same is true during a
restore, if the needed tape is not in the library an alert will be raised. By Default, DPM It will wait for
1 hour before failing the job.
This prompting timeout can be configured by the registry entry “PromptingTimeOut” under “HKLM\Software\Microsoft\Microsoft Data Protection Manager\1.0\Prompting”
PromptingTimeOut:REG_Dword:43200000 (dec) = 12hrs
The Formula is (#hrs * 1000 * 60 * 60)
1HR = 1*1000*60*60 = 3600000 decimal
So for each hour to wait, multiply by 3600000.
8hrs = 28800000 decimal
Restart the DPMRA service.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights.

Display short and long texts

Hi,
I have a hierarchy with node names more than 20 characters....The report displayes the node name with 20 char correctly, if it is more than 20 char it truncates the word and only displays 20 char....
I tried changing the Key& Text to Medium ....but it is not working....
Can anyone help....It is an urgent issue.....

Hi Dinesh/ Ramya,
I have the similar kinda problem.
recently we migrated to NW2004 bi7. we have one query using hierarchy, in that we are not getting medium text, only short text is displayed..
your help and inputs appreciated..
Thanks in advance

Changing Infoobjects Short and Long description on mass level

Hi,
We are trying to change the descriptions for infoobjects on mass level. We dont want to change the same in dev system and transport since its not feasible to check the consistency of the objects.
Kindly let us know if there is any other alternative for the same.
Thanks,
gaurav

Hi Siggi,
We tried changing the description using this function module and it worked in our DEV system. The concern here is when we check the attribute for this SAP standard function module it shows status "Not Released" under General Data tab.
Can we follow this appraoch as we could not find any other impacts since it changes only the text part of infoobject.
Thanks for the inputs!!
Regards,
Gaurav

Gl a/c short and long text based on company code

Hello Friends,
In table skat the gl account description is given based on chart of accounts but what if i want the description based on company code.
I want the table where i can get the gl account description based on company code??
Pls suggest.
Regards,
Sunny

Hi,
you can look at the database view for requirement
GL_ACCT_CC_TEXT
regards\
Mahesh

[SOLVED] S.M.A.R.T short/long tests failed

When I try to launch either short or long test to my hard drive, it stops at 10% saying: "FAILED". Any ideas? I know it has some bad sectors.
Also does anybody knows how to repair uncorrectable and pending sectors marked by s.m.a.r.t? If so, which tool?
Last edited by toni (2013-09-14 12:02:49)

Buy a new drive and replace this one ASAP. No, seriously. Even if it works for now, it's going to spiral into a nightmare sooner or later. If you really want to, you can use tools like badblocks or hdrecover to prolong it's agony, but it's still going to fail.

Creation of short text and long text?

Hi,
We create short text by using oe_fnd_attachments_pub.create_short_text_document and oe_fnd_attachments_pub.add_attachment API and to create long text we use fnd_documents_pkg.insert_row .
Why is it that we have different approaches for creation of short text and long text?
I know that oe_fnd_attachments_pub.add_attachment is used to attach a short text to some entity,but then why we dont do the same for long text?
Please lemme knw urgently ...
Thanks and Regards
Amar

Thanks for the help,
I looked into the document and i got to know few things as to how short and long text are created, but can u tell when the records are inserted into fnd_attached_documents, because i can see that records are inserted into fnd_attached_short_text and fnd_attached_long_text, fnd_documents but i dont see any insertion into fnd_attached_documents, can u lemme knw how and when it is done?

Showing short , medium and long texts together

Hi,
I have 0material and have navigational attribute -subdivision.
I need subdivision to be seen in the report as following
<b>KEY | TEXT SHORT | TEXT LONG</b>
is there a way to show those together in Reporting?
I know i can show KEY- SHORT TEXT or KEY-LONG TEXT but they are not useful for me.
Regards
Mete

Hi Mete,
you need to add the subdivision as infoprovider. Create a infosource just for subdivision and short and long text. Assign the text datasource to that infosource. Add 0txtsh and 0txtlg as attributes to the subdivision. Create a update rule from your new infosource to subdivision and update the subdivision and txtsh and txslg. But here you need to concentrate on just one language. Additonally post that new infosource to the texts as well providing the language key as well.
regards
Siggi

My m8120n has been freezing up and now when i try to boot i hear beeps, 2 short 1 long

my m8120n has been freezing up and now when i try to boot i hear beeps, 2 short 1 long.

I had my go out and am experiencing the same problem, have you had any luck solving this issue?

Difference betwen short text and long text

Hi,
what is the difference between short text, long text and variant.

Hi,
Short text is the short description you give for an object or field simlarly long text is the long description for a object or field.
Short text cannot have lenght more than 20 and long text more than 60.
Variant means for example if you give certain values as an input in one of your transaction for testing and you want the same values to be used every time you test in that particular screen, then instead of inputting the values again n again you call the variant.
Hope this helps
Assign points if useful
Regards,
venkat

TS3899 I can no longer send photos in an email from my iphone 5. It uploads the photo to the "new message" page - and then it freezes. I can use safari and check my emails, and when the email part is frozen the rest of the phone works fine ! any advice?!

I can no longer send photos in an email from my iphone 5. It uploads the photo the the "mew message" page and then it freezes! I can use safari and check my emails, and when the email part is frozen I can still use the rest of my phone. Any advice ?!?

Hi, ireland a.
I would recommend closing any open applications in multitasking and restarting the device. If unfamiliar with multitasking, I have included a screenshot on how to process an application close.
iOS: Force an app to close
Once these steps are processed, attempt to send the photo again.
iPhoto for iOS (iPhone): Send photos by email
http://support.apple.com/kb/PH3271
Regards,
Jason H.

HDD short and long test Freezes at 50%

Similar Messages

Maybe you are looking for