HDMI and Component Video at the same time?

I'm trying to connect both outputs of the Apple TV at once. HDMI to the projector and the component to my receiver. I want to be able to get a preview of what I'm going to be watching before sending it to the projector.
Is there a way to have both outputs active? I just need one component or composite output for my preview.

Wiqui wrote:
Is there a way to have both outputs active? I just need one component or composite output for my preview.
no.
HDMI takes precedence and will disable component when an HDMI cable is connected

Similar Messages

  • Is it possible to output to div monitor and s-video at the same time?

    I'm editing video and want to see the broadcast results on the fly (ie monitor and tv side by side, same image onscreen). Is it possible to output to div monitor and s-video at the same time? Maybe thru a splitter cable. I'm concerned about resolution issues.

    This is not possible with a mini.

  • Dual Audio Outs? / HDMI and RCA Analog at the same time?

    I am trying to figure out if the Apple TV supports dual audio output. My Onkyo receiver supports dual-room/dual-source audio (powered and line-level stereo audio output for 2nd room). The problem is it can only accept an analog source for the second room.
    I know that HDMI takes precedence over component video connections if both are connected.
    Will the ATV send audio signal out of the HDMI and RCA Analog jacks at the same time so I can enjoy streaming music is two rooms simultaneously?

    Iowabeerguy wrote:
    I like to be a helpful soul, so I decided to pull the owner's manual from Onkyo and take a look at the receiver, without ever thinking about the model number, and come to find out, I have my Apple TV hooked into an Onkyo TX-SR606.
    I appreciate that!
    Iowabeerguy wrote:
    Problem is, I have the HDMI into the Onkyo and the analog outs going to to another stereo receiver for the outdoor speakers. Both work at the same time, which means that the Apple TV will output both digital and analog at the same time.
    Good to know.
    Iowabeerguy wrote:
    Now, let's look at the receiver - if you have the HDMI plugged into the - say DVD input, and it's playing through the main system, and you plug the analog outputs into the DVD analog in on the receiver, the Zone 2 out will automatically look at the HDMI input, and not put out anything to the Zone 2 outs, because it won't pass digital to the Zone 2 outs.
    Oh yeah, that makes sense!
    Iowabeerguy wrote:
    I can't try it tonight, but I think if you plug the analog outputs from the Apple TV to an input that isn't assigned to an HDMI in, (like CD) and then set the Zone 2 amp to play that source, it should work.
    I've set aside some "tinkering" time this weekend to try that. I'll let you know if it works; I think it will. Thanks again!

  • Dual screen-annotate and watch videos at the same time?

    Does anyone know a way to annotate pdfs while watching a video lecture at the same time?  I have tried notability and side by side but both lack the capabilities to do both.  Thanks

    @kalos
    Uninstalled everything PA, also uninstalled mangler which was the only thing that depended on PA. It didn't work anyway.
    No pulseaudio --kill command so I couldn't run.
    Checked systemd journal and there is no mention of PA this time.
    Checked top, and grepped ps aux and there is no PA there either.
    I also rebooted the machine completely just to make sure. However VLC and HTML5 have the same incompatibilities.
    _ vlc Videos/anime/fmab/01.mp4
    VLC media player 2.1.5 Rincewind (revision 2.1.4-49-gdab6cb5)
    [0x1bc30f8] pulse audio output error: PulseAudio server connection failure: Connection refused
    [0x1af4118] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface.
    Fontconfig warning: FcPattern object size does not accept value "0"
    Fontconfig warning: FcPattern object size does not accept value "0"
    Fontconfig warning: FcPattern object size does not accept value "0"
    Fontconfig warning: FcPattern object size does not accept value "0"
    [0x7fb604001248] main vout display error: Failed to resize display
    But the video and audio did work until I ran some HTML5 video, after which the audio worked, and then I opened it again and it didn't work...
    @nomorewindows
    I see. That's too bad. At least we're not alone.
    Last edited by Greduan (2014-11-14 01:34:29)

  • Acquiring data from daq-pad and saving video at the same time

    I am trying to record data from my daq-pad at 100 samples per second. At the same time I am using a usb interfaced camera to record a video feed. The idea is that when i begin recording data i also begin recording the video feed.
    The way I record the video  feed works fine in its own VI (I need it to record at 30fps and it does this just fine). But when I integrate it with the data record/capture VI the framing rate slows down to only 10 fps. I suspect this is because the VI  gets caught capturing the data from the daq-pad thus slowing down its ability to record the video feed. I was hoping you could give me some help with how to record the data at 100 samples per second and get the VI to capture 30 frames per second. Thanks in advance for anyone who helps out.
    I've attached the VI that has both the data capture and the video capture already integrated.
    Attachments:
    usa_swimming with video21.vi ‏892 KB

    Hi,
    I took a look at your code and the problem is that you have both the data acquistion and the image acquistion in the same loop.  Have you tried using parellel loops?  There is more information about this in the labview tutorials that are available online if you are unsure how to do that.  The problem is that you are doing a lot of things in that loop (acquiring data, doing some analysis, and writing to file), so you can't acquire images very fast because it depends on the speed of the loop iteration.  I hope this helps.
    Have a great day,
    GG

  • Playing and saving videos at the same time

    Hi~
    I wanna download a movie clip from the Web and play it, and at the same time, save the clip onto the local disk. So next time I play the clip, no more downloading.
    my environment is Flash CS4 and AIR.
    I looked up three classes: NetConnection, NetStream, VideoPlayer.
    give me some hints~
    thanks.

    I found this tutorial and was going to try it out. http://tdotblog.info/?q=node/1 It looks pretty simple and and works with AIR.

  • Can I Use HDMI and Thunderbolt Outputs At The Same Time? And Mac App Store Issues

    I have a Mid-2011 Mac Mini. I am currently using the HDMI output with an HDMI to Digital Input for a dell monitor. If I wanted to have a second monitor, can I use the Thunderbolt output with a MiniDisplayport to VGA adapter? I know it may sound a little unclear, so if you need a clarification, pelase let me know.
    Also, on the same macine, I am having trouble connecting to the Mac App Store. My internet connection is working, and I've tried going into the Keychain Access and there isn't anything with a blue plus. When I go to Store --> Sign In , the sign in widnow doesn't appear.
    Thanks
    Joey

    Yes, that is exactly how to use dual monitors.
    Optionally:
    if the second monitor has DVI input, use the MiniDisplay Port to DVI adapter.
    or if it has Display Port input, then all you need is a straight MiniDisplay Port to Display Port cable.
    In Quick Links try Account if Sign In does not work.

  • Can I connect hdmi and display port at the same time?

    The toslink on my 2010 mini is glitchy. So I want to run the audio through the hdmi to my recevier. And the video through the minidisplay port to hdmi to a monitor. Will this work? Can I use the hdmi for audio only and the display port for video only? Thanks

    Yes, that is exactly how to use dual monitors.
    Optionally:
    if the second monitor has DVI input, use the MiniDisplay Port to DVI adapter.
    or if it has Display Port input, then all you need is a straight MiniDisplay Port to Display Port cable.
    In Quick Links try Account if Sign In does not work.

  • TS4113 Is there a terminal or other type of workaround to allow sound to come from the HDMI and headphone jack at the same time?

    I have a late 2012 Mini, running 10.8.2.  I have a set of powered speakers plugged into the headphone jack.  My TV is running on a direct HDMI connection.  I can only stream sound through HDMI, or even select it as an output, if I unplug my headphone speaker plug.  Apple's knowlege base says this is the case.  I am looking for a way to have both plugged in all the time, and have the sound mirrored to both.
         I use the speakers for itunes music, system sounds, skype, etc..  The HDMI sound is for steaming content to the TV.  I don't want to have to reach around behind the computer and unplug/plug each time I switch, for a multitude of reasons.  Any ideas out there?  Google wasn't getting me very far.  Maybe a terminal solution of some sort?  Thanks in advance.

    it seems that m1r3k found a very good workaround, at least for the Mid 2010 Mac mini models (that I'm using right now). I don't know if it works also with more recent Mac mini models.
    Re: After upgrading to lion, cant select HDMI sound setting
    Open Audio MIDI Setup.app in /Applications/Utility, click the + (plus) button in the bottom left corner of the window and choose "Create Multi-Output Device". In the new device settings tick the HDMI "Use" checkbox and you're done. Simply go to the usual System Preferences Audio panel and choose the newly created device, without the need to unplug the audio cable from the back of the Mac mini. You can also name the new audio device as you want.
    NOTE:
    This is only a workaround for a deliberate choice made by Apple on OS X Lion 10.7.2 and beyond:
    Mac mini: About HDMI audio and headphones
    Please let Apple know (here or here) how this has made things unnecessary awkward for users and needs to be fixed (these forums don't count, they are not read by Apple's employees)!

  • Can i play audio and record video at the same time, disabling the external mike, so the video has that audio?

    can i play  audio while recording a video so that the audio is recorded with the video? .. disabling the inboard mic, ? .. thank you 

    Hi SwedelostinAmerica,
    Welcome to the Apple Support Communities!
    The iPhone can maintain multiple pairing records, but it can only connect to one headset or hands-free device at a time. However, in your situation there may be a solution. You can connect the iPhone via Bluetooth for calls and use the 3.5mm jack on your iPhone and car radio to connect for music.
    The following article explains Bluetooth pairing and usage. Please use it as a reference.
    iOS: Third-party Bluetooth accessories
    http://support.apple.com/kb/HT1664
    Have a great day,
    Joe

  • Loading and Playing 2 videos at the same time

    Hello everyone
    I'm having a problem on loading and playing two videos at the same time on XletView.
    The background video, I'm loading by editing channels.xml that is located at config folder into xletview folder. I've just to add the file path and when i start the video it starts playing.
    But now, I have a problem. I have to load a file that is into my HD, and play it at the same time of the main(background) video.
    Do anyone know how to do this?

    anyone?
    PowerBook G4 1.67 GHz Mac OS X (10.4.7) 1.5 GB ram

  • When im facetiming with someone and im watching a youtube video at the same time, the volume for the youtube video is lowered and the facetime volume stays the same, how can i change that?

    When im facetiming with someone and im watching a youtube video at the same time, the volume for the youtube video is lowered and the facetime volume stays the same, how can i change that?

    Have you ever even used skype on an iphone or ipod?  We tried it and there is no way to type to each other while you are video chatting.  You can do the typing during the video on a COMPUTER, but not on an iphone or ipod.

  • I recently reset my iPod touch 4th gen. (holding power and home buttons at the same time.)  now it won't let me change my wallpaper, in the photo section or the settings. Any ideas, please? Thanks.

    I recently reset my iPod touch 4th gen. (holding power and home buttons at the same time.)  now it won't let me change my wallpaper, in the photo section or the settings. Any ideas, please? Thanks.

    What happens when you try to change them?
    Try:
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       

  • Can I run a podcast and an app at the same time?

    Can I run a podcast and an app at the same time?

    Yes for most.  You can run a regular app with an audio podcast.  I do not know what could run with a video podcast.

  • Itrip and car charger at the same time?

    I've noticed that all the iTrips for the 5th generation video iPod connect via the dock connector at the bottom. Is it possible to use an in car charger and an iTrip at the same time, as they both connect via the same input?
    Thanks

    That is not possible, but they do make an iTrip specifically for the car. It chargers at the same time. Check Griffin's website.
    My friend hasa it and loves it. The charger actually helps the iTrip get a stronger signal.

Maybe you are looking for

  • Can Apple Remote Desktop route audio to selected computers across network?

    Can ARD be used to route audio output (e.g. from iTunes) across the network? If not, suggestions would be appreciated. I remember that there was a -display option on Unix commands that let us run applications remotely and wondered if that might be a

  • How do I merge sequences in Adobe Premiere CS6?

    Hi Everyone, I'm attempting to do something new for the purpose of efficiency. I want to put individual segments sequenced together on individual sequence timelines and then merge them all together. Is this possible and if so how? This would allow me

  • Your account cannot be created at this time

    Hello, can anyone help me please. i bought Iphone 5 from UAE and when i tired to create new App User account in Facetime from my IPhone 5 i got the below error message: "your account cannot be created at this time" i tried more than 100 times for 3 d

  • EIC  Access controll of Activities - Security Issues

    Hi Experts 1. If the person affected is also a SSC agent, if we want to ristrict him to see the activity created for him (such as disciplinary proceedings) can we ristrict the effected employee (SSC agent) to view the Activity. How can we do this, in

  • Printer,me​mory

    help please  am having trouble with my printer,tells me to clear memory don't know how to do this please help