HDMI Audio doesn't work on Windows 10 Tech Preview

I am using a HP ENVY TouchSmart 15-j053cl Notebook PC and often plug it directly into my television for streaming video. However, after updating to windows 10 tech preview the HDMI output for audio no longer appears in playback devices, though video is fine. Upon further inspection I found that the device is not starting via device manager, i.e
"This device cannot start. (Code 10)
{Operation Failed}
The requested operation was unsuccessful."
I attempted to reinstall the driver from the support site for windows 8.1, but that had no effect. The driver I installed
IDT High-Definition (HD) Audio Driver 2013-09-30 , Version6.10.6491.0, 43.95M
Located http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4158&lc=en&cc=us&dlc=en&sw_lang=&product=5390...
Are there any drivers out yet that can bridge the gap from 8.1 to 10?
Any help would be great,
Coletrain

@Coletrain
Thank you for using HP support forum. I have sent you a private message. If you’re unsure how to check your private messages please click here.
Thank you,
Omar
I Work for HP

Similar Messages

X-fi Xtreme Audio doesn't work in Windows 7 64 bit

Hello everyone,
I know this is a known issue and I've found many topics on this, but still I can't find any solution and I hope you can help.
I've a Creative X-fi Xtreme Audio that was working perfectly under Windows XP SP3 but then I've upgraded to Windows 7 64 bit and the sound coming out from my speakers is awful. I've installed the latest driver from creative home site, I've updated the OS via "microsoft Update", I've tried many suggestions I've found on the web to solve this, like phisically change the PCI slot of the sound card, or reduce the ram ammount via msconfig but it didn't work. I've tried some custom driver either, the support pack 2.7 by Daniel?K. but nothing... I'm still at the starting point.
What should I do?
This is my actual configuration:
OS: Microsoft Windows 7 Premium SP v 6..760
CPU: AMD Athlon 64x2 6000+
MB: Asus M3N78 SE (with the latest bios version 002)
Ram: 4gb
Video: nVidia GeForce GT 220

I use CS4 on a Windows 7 64-bit computer.
I noticed that none of the extensions I installed with the Extension Manager don't appear at all in any of the CS4 programs.
Can anyone tell me why this doesn't work or how to solve this problem?
Try posting to the Extension Manager forum:
http://forums.adobe.com/community/creativesuites/extensionmanager
HTH,
Randy

HDMI audio doesn't work

I'm using an Acer Aspire Revo R1600 as a mediacenter using XBMC. It's connected to our Samsung TV (pretty sure it's the ES8000) through a Pioneer VSX-922 amplifier (or to be more precise, A/V receiver). It's connected to the receiver over HDMI, which links the video through to the television.
Now the problem: This setup worked fine with my old TV, a pretty old Philips model. The second I plugged in the new TV, the amplifier wouldn't output any sound anymore. When I connect it to my computer monitor (which has a 3.5mm jack to connect PC speakers to) sound works fine, and so does the 3.5mm headphone jack on the front. I'd like not to use that though, seeing that the output volume is extremely low and I don't like cranking up my amplifier about halfway just to watch a movie at reasonable volume.
Here's an lspci:
[root@xbmc ~]# lspci
00:00.0 Host bridge: NVIDIA Corporation MCP79 Host Bridge (rev b1)
00:00.1 RAM memory: NVIDIA Corporation MCP79 Memory Controller (rev b1)
00:03.0 ISA bridge: NVIDIA Corporation MCP79 LPC Bridge (rev b2)
00:03.1 RAM memory: NVIDIA Corporation MCP79 Memory Controller (rev b1)
00:03.2 SMBus: NVIDIA Corporation MCP79 SMBus (rev b1)
00:03.3 RAM memory: NVIDIA Corporation MCP79 Memory Controller (rev b1)
00:03.5 Co-processor: NVIDIA Corporation MCP79 Co-processor (rev b1)
00:04.0 USB controller: NVIDIA Corporation MCP79 OHCI USB 1.1 Controller (rev b1)
00:04.1 USB controller: NVIDIA Corporation MCP79 EHCI USB 2.0 Controller (rev b1)
00:08.0 Audio device: NVIDIA Corporation MCP79 High Definition Audio (rev b1)
00:09.0 PCI bridge: NVIDIA Corporation MCP79 PCI Bridge (rev b1)
00:0a.0 Ethernet controller: NVIDIA Corporation MCP79 Ethernet (rev b1)
00:0c.0 PCI bridge: NVIDIA Corporation MCP79 PCI Express Bridge (rev b1)
00:10.0 PCI bridge: NVIDIA Corporation MCP79 PCI Express Bridge (rev b1)
00:15.0 PCI bridge: NVIDIA Corporation MCP79 PCI Express Bridge (rev b1)
00:16.0 PCI bridge: NVIDIA Corporation MCP79 PCI Express Bridge (rev b1)
00:17.0 PCI bridge: NVIDIA Corporation MCP79 PCI Express Bridge (rev b1)
00:18.0 PCI bridge: NVIDIA Corporation MCP79 PCI Express Bridge (rev b1)
03:00.0 VGA compatible controller: NVIDIA Corporation ION VGA (rev b1)
05:00.0 Ethernet controller: Qualcomm Atheros AR242x / AR542x Wireless Network Adapter (PCI-Express) (rev 01)
And arecord -l:
[root@xbmc ~]# arecord -l
**** List of CAPTURE Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
Somebody please help me, I'm clueless.
--EDIT-- Here's a screenshot of AlsaMixer (I'm SSHing into the machine from my desktop computer)
Last edited by Vijfh (2013-07-05 11:48:03)

[root@xbmc ~]# aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
I tried following that guide, but
aplay -D plughw:0,3 /usr/share/sounds/alsa/Front_Center.wav
didn't play anything. I also tried connecting the computer to the television directly, still no audio output.
Something I also tried was putting the aplay -D in a while loop, and then plugging the HDMI cable in while it's looping, to no avail.
Last edited by Vijfh (2013-07-06 21:54:58)

In my envy 13, the hdmi connection doesn't work with windows 8

everything works properly in the laptop, except the HDMI connection

I wrote this VI to investigate how to integrate a Joystick into my LabVIEW code (I called the VI "Joystick Sampler"). It has two parts -- the lower function, "Query Input Devices", makes an array of devices, their names and number of Axes, Buttons, and POV "hats", in an array called "Joystick Info". Look at this first, paying attention to the Array Index that seems to correspond to your Joystick when you plug it into a USB port.
The upper code will sample (one of the) Joystick(s) at the rate of 10 Hz, allowing you to test buttons, axes, etc. Note that the first "Initialize Joystick" function takes a parameter (default = 0) that corresponds to the Joystick Index you discovered by examining the Joystick Info array (see previous paragraph) -- if your Joystick, for example, seems to be at Index = 4, wire a "4" into the Initialize Joystick function.
BS

HDMI audio is not working on my Satellite P50-A-14G

Hello, my pc is a SATELLITE P50-A-14G, and I'm writing this because when I conect the HDMI to my pc, the audio doesn't work. I've tried almost everything, but it doesn't seem to recognize the HDMI as sound player. Image is good, but sounds keep playing from the speakers of the laptop itself.
I've checked the playback tab on the sound config and it doesn't appear HDMI device to select.
I've also checked on the Device Manager and uninstalled the "IDT High Definition Audio CODEC" wich was automatically updated once reset the laptop, but I didn't appreciated any changes at all. I have also checked if the HDMI output was in disabled, but it doesn't appear at all. I don't know what else to do! Help me, please!

Originally Posted by valeriiish
I've checked the playback tab on the sound config and it doesn't appear [/COLOR]HDMI device to select.
Hi
Click with right mouse button and enable options “show disabled devices” and “show disconnected devices”.
Is HDMI device shown now?
If your notebook recognized TV the sound device must be detected too.
Do you use original preinstalled OS that you got with your notebook?

USB Bose Audio Doesn't Work & DVD/CD Ejects during startup 10.6.1

Anyone having this problem on the Mac Pro 8 Core
USB Bose Audio Doesn't Work, have to pull USB plug out and put it back in for audio to be recognised & DVD/CD Ejects during startup >>> 10.6.1

What is the ouput of cat /proc/asound/cards, aplay -l?
For an example:
[firekage@arch_desktop ~]$ cat /proc/asound/cards
0 [XFi ]: SB-XFi - Creative X-Fi
Creative X-Fi 20K1 SB073x
1 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xf6080000 irq 17
2 [U0x46d0x825 ]: USB-Audio - USB Device 0x46d:0x825
USB Device 0x46d:0x825 at usb-0000:00:14.0-7, high speed
[firekage@arch_desktop ~]$
[firekage@arch_desktop ~] aplay -l
card 0: XFi [Creative X-Fi], device 4: ctxfi [IEC958 Non-audio]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 9: HDMI 3 [HDMI 3]
Subdevices: 1/1
Subdevice #0: subdevice #0
[firekage@arch_desktop ~]$
I think that you have multiple sound devices and their boot order changes after each reboot.
Last edited by firekage (2014-06-20 13:13:05)

Audio doesn't work after encoding

I have finished editing a video and gone to export it as a WMV and the audio doesn't work; there is just a buzzing noise.
The audio works fine on the timeline, but i just cannot export it.
Any ideas what's gone wrong?

Hi ATR, thanks for getting back to me. Here is all the info you required:
It's Premiere Elements 10 on a Windows 7 PC.
The source media is a mix of WMV, MP3 audio and JPGs.
The project settings are:
Editing Mode: DSLR
Timebase: 25.00 frames/second
Frame size: 1920 x 1080
Pixel Aspect Ratio: Square Pixels (1.0)
The export settings are:
Windows Media:
Presets: HD 720p 25
File type: Windows media
Frame size: 1280 x 720
Fps: 25
Audio settings: 440 kbps, 96kHz, 2 channel 24 bit VBR (I have tried it with a number of different variations on this and still had no luck)
I’ve tried opening with Windows media player as well as VLC. Neither are having it.

Beats audio doesn't start with windows

Hi,
beats audio doesn't start with windows. when i log into windows, no beats icon shows in the notification area.
it only works when i go to Control Panel and open up beats audio control panel, then the icon shows up.

Hi @MadGrin
Welcome to the HP Forums!
It is a terrific place to find answers.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
How Do I Find My Model Number or Product Number?
When I checked the driver page for DV5000 I noticed it came with either XP or Vista.
Have you checked for any HP bios updates for your notebook? If not you could try that but please be aware that updating the bios does have a potential to cause damage. For this reason I suggest contacting HP support for assistance with that process .
Updating the BIOS
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Have you checked compatability for Windows 8.1. Windows compatibility Center
There is a option to scan your computer to check if your apps and device work.
Have you done all the updates for Windows 8.1?
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Video audio doesn't work

video audio doesn't work
video runs but no sound
please help

ITunes uses Quick Time to convert. Quick Time cannot convert MPEg (Muxed) Files. Read this:
Quick Time: Using MPEG 1 and MPEG 2 Files:
http://docs.info.apple.com/article.html?artnum=61608
Again:
It is not possible to export the audio portion of a muxed MPEG-1 or MPEG-2 audio/video stream using QuickTime.

My i pod nano first generation doesn't work with windows 8

My i pod nano first generation doesn't work with windows 8

Howdy yvesmd,
Thanks for using the Apple Support Communities.
If your iPod nano is not being recognized in iTunes on your Windows computer, then I'd like you to please follow the directions in the link below.
Apple - Support - iPod - iPod nano Troubleshooting
Cheers,
Alex H.

TS3704 How are you supposed to fix "The feature you are trying to use is on a network resource that is unavailable" alert appears when you remove Apple software in Windows if it doesn't work on Windows 8 or 8.1???

How are you supposed to fix "The feature you are trying to use is on a network resource that is unavailable" alert appears when you remove Apple software in Windows if it doesn't work on Windows 8 or 8.1???

See Troubleshooting issues with iTunes for Windows updates. You may have to uninstall what you can, reboot and delete the named folders, then reinstall.
tt2

"Email me" doesn't work in Windows

Has anyone found that the "Email me" button doesn't work on Windows machines? I have just been told by one or two visitors to my website (www.aroundthebusch.com) who use Windows that the buttons didn't work.

It may be a Flash Security issue... upload SWF to server, open it to browser from there and try your links again...
Here´s one SWF exported from indesign (links to email at page 3):
http://www.edocker.com/_demo/edocker-online-demo/index.html

AT-AO-10 doesn´t work with Windows 2000

I have an AT-AO-10 board that doesn’t work with Windows 2000. I have reserved two IRQs for legacy devices (non plug and play) in BIOS. The AT-AO-10 has got assigned these IRQs, a DMA and a base address that are free, and there aren’t any hardware conflicts, but the board doesn't pass the MAX's text.
In Windows 'Information System', the board is shown in 'Forced hardware', but I don’t know that is a problem.
If the board is unplugged, error messages are the same.

Hello;
You didn't mention what version of the NI-DAQ driver you are using over there. Anyway, my suggestion to you is to uninstall the NI-DAQ driver you have installed, remove the board, reboot the machine, download and install the latest NI-DAQ version (6.9.3) from NI web site.
Try the installation with the new driver, and if that is still not working, the best bet is to try the same installation on a different machine to double check if the hardware is not defective.
Regards
Filipe A.
Applications Engineer
National Instruments

I installed an HP update for audio driver, now audio doesn't work,

downloadde and installed an HP update for audio driver, don't think it installed successfully however now my audio doesn't work. is it possible to do a system restore on win 8.1?
HP Pavilion 500-214
This question was solved.
View Solution.

Actionhero, welcome to the forum.
Yes, it is possible to do a System Restore. Here is a guide that will help you with it.
Please click the "Thumbs Up+ button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Application Restart and Recovery APIs doesn't work for windows services

I am using the Application Restart and Recovery mechanism (provided in Windows API Code Pack for Microsoft.NET Framework) to collect some information (i.e. stack information when there's an unhandledexception) before my windows service crash down.
It works well for windows form applications, but the callback method wouldn't be called if the host is a windows service.
I have checked the article: https://msdn.microsoft.com/zh-cn/subscriptions/downloads/cc303708
But it doesn't specify clearly whether it works for a windows service. It seems that the recovery will only be activated when the user interacts with the error dialog of Windows Error Reporting (clicking "close" on the dialog, for example).
So I am wondering is my guess right that the Application Restart and Recovery mechanism doesn't work for windows services. Or is there a better way to meet my requirement?

I would suggest trying ARR if that's what you want to use. The restart portion won't work, but it doesn't need to as if you fail out of your service, the Windows service controller will handle recovery (up to and including restarting your service).
You configure those recovery actions either through code or one of the built in administrative tools for services such as services.msc.
DebugDiag/ADplus and similar tools ultimately do use built-in APIs; you don't need to add anything external to collect debugging information. You do however have to write a good deal of code to do somethings. It's pretty simple to use the unmanaged
function that I pointed out before and
MiniDumpWriteDump to write a minidump when you hit an unexpected error(the dbghelp.dll that comes installed with Windows has it so you don't need anything additional installed). You can even write a basic debugger that literally debugs a process using
only kernel32 functions (see
https://msdn.microsoft.com/en-us/library/windows/desktop/ms679301(v=vs.85).aspx if you're interested).
WinSDK Support Team Blog: http://blogs.msdn.com/b/winsdk/

HDMI Audio doesn't work on Windows 10 Tech Preview

Similar Messages

Maybe you are looking for