HDMI Audio not playing on TV

I have been using my HDMI on my tv for a while but now the audio is not playin on th TV now. For some reason the ATI HDMI Output device is disabled. Can some one help to get it enabled again.
Im running Windows 7 (64-bit)

Hi,
Try using Recovery Manager to reinstall your AMD Graphics Driver - the procedure for using recovery manager to reinstall Software and Drivers is detailed in the relevant document on the link below.
Recovery Manager - Windows 7
After the reinstallation has completed, restart the notebook.
When windows has reloaded, see if ATI HDMI Output is now showing as enabled and if not, whether you can right click the entry and select Enable.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

Premiere CC 2014 audio not playing

Audio not playing in some projects, either in reference mon or timeline, but plays in other projects.
Premiere CC latest
MAC 2.66 Gh i7 8GB RAM NVIDIA GeForce GT 330M 512 MB
OSX Mavericks /256GB SSD (P
1TB HD write disc

Moving to Premiere forum

Audio not played for Motion Background

I have created a movie in my NLE as a motion background for a menu in Encore 2.0. When I preview the dvd project after rendering the audio plays fine but when I burn to dvd the audio is missing but the motion video still plays.
Why is this audio not playing on the burned dvd

In what form is the motion background when you bring it into Encore? Is it an avi? Is it compressed?
Is the audio stream a separate file?
If separate, is the audio stream a different length to the video file? Is the audio stream just a .wav file or what?

G62-225DX. HDMI audio not working.

Computer recognizes HDMI port and video is working to TV. Trying to change to default in sound settings but won't change. When I test sound error message "failed to play test tone"

Hi Kevin,
See if this will help:
1. Turn off both systems (TV and PC).
2. Connect HDMI cable to the TV and PC.
3. Turn on TV and select correct HDMI input.
4. Turn on your PC.
Open "Control Panel , Sound". See if you can now select TV (HDMI audio) as the correct playback device.
Jaco
****I am not an HP employee****
Please give a" Kudos, Thumbs Up" if advice received is relevant or" Accept as Solution" to assist other forum users having a similar problem.
HP Products:
810-150se Desktop
17t-j000 Notebook
H8 1380t CTO Desktop
560z Desktop
Errare humanum est.

Audio not playing through external speakers

I have all the right connections and get nothing.
I am trying to use my laptop in my home theater room. I have a DVI to HDMI cable for video and then I have a Mini Plug adapter (headphone jack) on a Co-AX cable for my audio which is plugged into my receiver. I went into the menu of my receiver and made sure I selected the correct set up and I still get no audio. I am not getting any video either for that matter. I have a HD Projector with 3 HDMI inputs so I am not sure why I am not seeing anything.
Now I do have an HDTV elsewhere in my house and I hooked my Macbook Pro to that and switched the input of the TV to HDMI and I WAS able to see my desktop on the TV. However, the audio was not playing. I had the audio plugged into the PC Audio Input on the TV but only heard the audio when I switched from HDMI to PC on my TV.
I only hooked it up to my HDTV as a test to see if my cables were bad which they are not. I am just not sure why I can't get it to work in my Theater room!

Its not weird at all. FCP is designed for it's output to be monitored on an external TV and speakers via your Mac's Firewire output (or dedicated capture card, if you have one). If you prefer not to monitor the recommended way, in FCP, go to View->Audio Playback and choose the setting you want.
-DH

HDMI Audio not working on Q190 (along with all higher level Audio Formats)

Help, I have been given the run around via support, I cannot get the HDMI audio to work with my Pioneer Surround Sound, only the Intel display audio shows in control panel (Win 8 X64) and the RealteK S/P Dif port and it is not capable of supporting 7.1 sound or bitstreaming or DTS, Dolby HD, Etc. Tec support appears not capable of fixing the issue and wanted to send me to software support and pay. I have only had the machine for 4 days and it has never supported higher level sound.
Every other device I have (had or currently) connected to the receiver works just fine. I have to figure this out or return the machine, the audio is the most important aspect for me. Besides when you advertise 7.1 support the machine you sell should be able to do it.

Hey guys,
I have had this Q190 with the Celeron CPU since last week and I am using XBMC Frodo and the HDMI is connected to my AVR Onkyo TX-NR809 and from the Onkyo to the TV. And the sound is 7.1 with PLIIZ. It works fine. I think it may be some driver problem because Realtek Audio which is in the Q190 works fine with the Win8 preinstalled. Realtek is kind of bad with driver because I lost my wifi after upgrading to Win 8.1. After a few days with no wifi, I found out that the driver was bad, yes it was a Realtek wifi driver but posted by Lenovo for W 8.1.
I have another friend who also just bought the Q190 and he reported no audio problem so I think it is just a matter of trouble shooting the drive and configuration. I do love the form factor of the Q190.

Captivate 4 TTS Audio not playing in published or preview ok in edit

While viewing my project in published view, audio did not play on 5 of my 70 slides. (It worked fine previously). It played Ok in edit but no sound in preview or published. I tried to replace the audio using the Convert TTS button, and the audio would not replace the previous audio. Even removing the audio and dragging the new audio to the timeline would not work. I reinstalled Captivate 4 and TTS, and it seems to work fine on new a new projects but I can not seem to get it to fix my current project. Can anyone advise if I can fix those slides, or have I somehow corrupted those slides? It's a big project. Thanks in advanced

If I ever see dodgy behaviour like this on a slide, and it doesn't resolve easily with a reboot or republish, I just recreate the slides and delete the old ones. It's often far quicker to do this than muck around trying to fix them. If there is corruption in a slide, you don't want it anywhere in your project.

HDMI audio not working in HP Pavilion dv4 1290-br

Hello, people.
I can't get my HDMI audio to work on my laptop (HP Pavilion dv4 1290-br). The output of aplay -l is:
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: STAC92xx Digital [STAC92xx Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
I've tried setting ~/.asoundrc, /etc/modprobe.d/alsa.conf, /etc/modprobe.d/alsa-base... Nothing works.
Can someone help me out here?
Thanks!

I've a DV4 and I did get it to work many months back; and have not done it since. If I recall correctly, I had to resort to JACK. YMMV

[SOLVED] HDMI audio not functioning

I'm having trouble getting audio working. My setup is audio through HDMI, but I actually don't have a way to test audio through any other means, so I'm not sure if HDMI has anything to do with the problem.
My onboard video chipset is ATI Radeon HD 4250, and so I have added "radeon.audio=1" to my GRUB's boot entry, however nothing seemed to change. Where I seem to be stuck is that aplay will not pick up any sound devices:
$ aplay -l
aplay: device_list:252: no soundcards found...
From http://lkubuntu.wordpress.com/2011/07/2 … eshooting/ I was able to yield the following:
$ lspci -nn | grep '04[80][13]'
00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) [1002:4383] (rev 40)
01:05.1 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI RS880 HDMI Audio [Radeon HD 4200 Series] [1002:970f]
From some commands in the ALSA page at the wiki:
$ lsmod | grep '^snd' | column -t
$
$ ls -l /dev/snd
ls: cannot access /dev/snd: No such file or directory
No idea why almost all of the commands I'm seeing are returning the opposite of what they should. Any ideas?
Last edited by skoh-fley (2012-03-10 19:05:13)

Thanks for your replies guys! Using both of your posts' information I was able to get HDMI audio working. Here's what I did:
# modprobe -v snd-hda-intel
FATAL: Module snd-hda-intel not found.
At this point I found a post that suggested reinstalling kernel26:
# pacman -S kernel26
warning: linux-3.2.9-1 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): linux-3.2.9-1
Total Installed Size: 57.45 MiB
Net Upgrade Size: 0.00 MiB
And after that all the commands starting working:
# modprobe -v snd-hda-intel
insmod /lib/modules/3.2.9-1-ARCH/kernel/sound/soundcore.ko.gz
insmod /lib/modules/3.2.9-1-ARCH/kernel/sound/core/snd.ko.gz
insmod /lib/modules/3.2.9-1-ARCH/kernel/sound/core/snd-timer.ko.gz
insmod /lib/modules/3.2.9-1-ARCH/kernel/sound/core/snd-page-alloc.ko.gz
insmod /lib/modules/3.2.9-1-ARCH/kernel/sound/core/snd-pcm.ko.gz
insmod /lib/modules/3.2.9-1-ARCH/kernel/sound/core/snd-hwdep.ko.gz
insmod /lib/modules/3.2.9-1-ARCH/kernel/sound/pci/hda/snd-hda-codec.ko.gz
insmod /lib/modules/3.2.9-1-ARCH/kernel/sound/pci/hda/snd-hda-intel.ko.gz
# cat /proc/asound/{cards,devices}
0 [SB ]: HDA-Intel - HDA ATI SB
HDA ATI SB at 0xfeb00000 irq 16
1 [HDMI ]: HDA-Intel - HDA ATI HDMI
HDA ATI HDMI at 0xfe710000 irq 19
2: [ 0- 2]: digital audio capture
3: [ 0- 1]: digital audio playback
4: [ 0- 0]: digital audio playback
5: [ 0- 0]: digital audio capture
6: [ 0- 0]: hardware dependent
7: [ 0] : control
8: [ 1- 3]: digital audio playback
9: [ 1- 0]: hardware dependent
10: [ 1] : control
33: : timer
Using this information I just followed OrionFyre's instructions and the sound works perfectly! Thanks all!

Audio not playing in CC 2014

Hi all,
I have seen a few threads with the problem I am having, but not exactly. And still no solutions.
So often, like 3-4 times a day when I open an existing project or even start a new one the audio will not play from any of the clips I am using. This happens both in the timeline and in the source viewer. I can see the waveforms, I can see he meters going, just can't hear anything
Here's what I have done:
Checked audio hardware in PP and on my system. Audio plays fine out of the system and the audio hardware is set to the correctly.
Changing the audio hardware output does not help. I use a Bose Speaker system, but changing to internal speakers does not help.
I am waiting the required time to allow the project to conform.
The problem arises in every clip in the project, which include a number of different sources.
I have trashed preferences in PP. Did not help.
The only way I can get it to work is to reboot, and even then that does not always work. Sometimes I have to reboot a few times.
SYSTEM
10.8.5
MacPro 2x2.66GHz 6-Core Intel
Current version of Premier Pro CC 2014
Any suggestions would be appreciated. Thanks.

I'm having an issue where some of or all of the audio tracks just drop out during playback (green bar). I have to stop/start the playback and all is fine until the next random time it does it.

ATI HDMI Audio Not Working

Hi. I'm trying to get my ATI HDMI audio working. I've followed the instructions at https://wiki.archlinux.org/index.php/ATI#HDMI_Audio and running "aplay -D plughw:1,3 /usr/share/sounds/alsa/Front_Center.wav" outputs no errors nor any sound on my TV. Adding radeon.audio=1 to my syslinux.cfg and rebooting results in no changes.
I have also followed the instructions at https://wiki.archlinux.org/index.php/Ad … s_Not_Work which also resulted in no changes. One note though. When I select my HDMI sound card in alsamixer, there is only one sound bar shown entitled S/PDIF. I can mute or unmute it but not increase the volume from 0. No idea if this matters.
Also, I'm using the xf86-video-ati driver.
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: ALC888 Analog [ALC888 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: SB [HDA ATI SB], device 1: ALC888 Digital [ALC888 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
Any help would be appreciated, I'm stumped and I would love to get this fixed so I can get xbmc working and fully drop windows.

I'm not entirely sure how I would go about doing that, or if I would need to considering the command I run to test the HDMI audio...
aplay -D plughw:1,3 /usr/share/sounds/alsa/Front_Center.wav
... is, I'm assuming, sending the sound directly through my HDMI due to plughw:1,3 specifying that. I put it as 1,3 after running aplay -l.
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: ALC888 Analog [ALC888 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: SB [HDA ATI SB], device 1: ALC888 Digital [ALC888 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
Also, I'm running xmonad, not gnome/kde, so I don't know what settings I can change beside what's in alsamixer.

Audio not playing in mov format K'08

Ive seen a lot of threads but none had a solution to this.
With the slides, I included an mp3 from within itunes
dragged it from the media window into the documents soundtrack box
clicked looped
and played just fine throughout the manual presentation.
clicked export to .mov
checked include audio files
when the mov plays it is silent.
I tried one workaround, using the newly recorded audio file reimported into keynote 08 and exported again - still silent
has anyone figured out how to get the audio to play in .mov?
thanks

Believe it or not, I've been having this same problem since I bought my Imac G5 a few years ago. It just happened to my MacBook Pro, as well. Along with the fact that mpg audio is gone, so is flash audio. It seems to happen every so often, usually after one of my computers hang while loading a preview for a flash movie. The problem actually seems to correct itself after a few restarts, or loading of some programs.
In the process of writing this post, I regained support for mpg audio, and flash audio - and in quicktime player for that matter. When I started writing this, it didn't work. I dunno, quicktime is weird that way. The longest time I was without flash or mpg audio was for a period of 3 weeks. After which, it somehow was magically there again. I wish that wouldn't happen, as it usually happens at the most inconvenient times. The whole way flash is not supported through newer versions is rather irritating as well isn't it? Use SAFlash player for mac for those if you can: http://www.adobe.com/support/flashplayer/downloads.html
(sorry a little off topic there)
MacbookPro17" Mac OS X (10.4.7) Imac G5, PowerMac G3, Mac LC

QuickTime movie made in QuickTime 7 audio not playing back in qt 10

I made a qt using qt 7 pro, H.264 with the AAC audio compressor and that qt will not play back audio in QuickTime 10 which is what my client has on his computer.

The point being here is that I rendered out a movie in QuickTime pro 7 and the audio isn't being resolved in QuickTime 10, even on my own computer.
Does the audio play correctly in the QT 7 Player? Have you determined if this is a playback or a conversion problem? I asked about the source file since some source compression formats will not convert the audio using QT 7 Pro. In a similar manner, some AAC data rate and sampling rate combinations are not supported on the Mac which is why QT is programmed to disallow their use. (Unfortunately, I do not know what would happen if a source file using such audio settings were to be used as a source for a QT 7 Pro conversion.)
How is this possible and should I just remove qt10 altogether?
As already indicated, there are a number of "normal" problems that could give these results. In addition, QT changes made as part of the most recent Lion OS update seem to have had adverse effects on QT 7 Pro features (as evidenced by the loss of the "loop" playback feature and "green screen" problems on some platforms). As to the removal of QT 10, the embedded structures cannot be removed without corrupting the operating system. And, while the QT X player can be removed/deleted, why bother since you can just as easily opt not to use it for manual playback and restoring it, should you later change your mind, may present a problem.
I am a professional editor, have been working on Macs since 1992 (Avid and FCP7) and have never had a compatibility problem like this before within the Mac environment.
Have you made any recent changes to your normal work flow that might account for this problem and is the problem consistently repeatable?

Merged clips audio not playing

Is there a reason why my merged clips no longer play audio?
Also is there a way to batch merge clips? I had to individually sync my whole project one video/audio clip at a time...a little disappointing to do all that work and come back to my project where the audio won't play.

Might be a good idea for a feature request.
Adobe - Feature Request/Bug Report Form
On the not playing issue, I'm sort of stumped. It's just always worked for me, and it's not an issue I recall seeing reported here by others.
Maybe try recreating the merge?

Embedded Audio not playing - Flash Player 10.0.45.2

Hi
With the recent update of the Flash player I noticed that random *.swf files containing just embedded *.wav files will not play.
The only things that seem to fix this problem are;
Change the audio publish settings and republish
Or createa new *.fla and republish
Can anyone explain why this is happening? Is this bug temporary?
Thanks,
Joseph

Hi, the Flash forum was down in my area. Here is a link that you may just bookmark as it most likely have everything FP, just something to keep handy:
http://www.adobe.com/devnet/flashplayer/articles/flash_player_admin_guide.html
This is the FP Installer for Internet Explorer that you download to and run from your Desktop:
http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe (Not the debugger version)
This is the FP Installer for Firefox(or other browsers that FP supports) Download to the Desktop & run from there.
http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player.exe
When that Uninstaller was used for the 10.1, if I'm not mistaken it Uninstalls FP from all browsers.
I'm sure you are familiar with the ActiveX Settings and using the Administrator account to have the permissions to Install the ActiveX Control and write to the Windows Registry. Adblock in FF will need to be disabled if you use it and any pop up blocker software installed. You may want to refer to the Uninstall instructions for further info:
http://kb2.adobe.com/cps/141/tn_14157.html
You may also want to review the Troubleshooting guide to head off any issues before rather than after:
http://kb2.adobe.com/cps/191/tn_19166.html
Usually I cover the "prep" info but since we didn't discuss that, thot I'd post it, so if you need it you have it.
If you have any questions, just post. If you want the debugger version, I'll need to find the link.
Thanks,
eidnolb

HDMI Audio not playing on TV

Similar Messages

Maybe you are looking for