HDMI Audio not working on Q190 (along with all higher level Audio Formats)

Help, I have been given the run around via support, I cannot get the HDMI audio to work with my Pioneer Surround Sound, only the Intel display audio shows in control panel (Win 8 X64) and the RealteK S/P Dif port and it is not capable of supporting 7.1 sound or bitstreaming or DTS, Dolby HD, Etc. Tec support appears not capable of fixing the issue and wanted to send me to software support and pay. I have only had the machine for 4 days and it has never supported higher level sound.
Every other device I have (had or currently) connected to the receiver works just fine. I have to figure this out or return the machine, the audio is the most important aspect for me. Besides when you advertise 7.1 support the machine you sell should be able to do it.

Hey guys,
I have had this Q190 with the Celeron CPU since last week and I am using XBMC Frodo and the HDMI is connected to my AVR Onkyo TX-NR809 and from the Onkyo to the TV. And the sound is 7.1 with PLIIZ. It works fine. I think it may be some driver problem because Realtek Audio which is in the Q190 works fine with the Win8 preinstalled. Realtek is kind of bad with driver because I lost my wifi after upgrading to Win 8.1. After a few days with no wifi, I found out that the driver was bad, yes it was a Realtek wifi driver but posted by Lenovo for W 8.1.
I have another friend who also just bought the Q190 and he reported no audio problem so I think it is just a matter of trouble shooting the drive and configuration. I do love the form factor of the Q190.

Similar Messages

When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

Hi Brian,
Thanks restoring and restarting didn't fix my problem - i have started it fresh and still it doesn't work. Basically I press ONCE on the remote, after the machine has not had any commands for 10 minutes, and the cursor skips from one end of the menu to the other - so I can't choose network or update software etc - I sometimes manage to stop it randomly in the middle of the menu if I press on a command in the middle of the cursor skipping all the menu steps...not sure what the problem is but I have basically not used my brand new apple tv since I bought it for that reason! I should call Apple support I suppose! grrrr hate wasting time with stuff like this!
Thanks for your help though!
Pernille

Itunes account is under a comcast address along with all my 800 tunes, my .me address is not connected to the music. how do I get itunes match to work for my iphone

itunes account is under a comcast address along with all my 8000 + tunes, my .me address is not connected to the music. how do I get itunes match to work for my iphone

U.S. Cellular does not unlock iPhones: iPhone: Wireless carrier support and features - Apple Support
Sell the iPhone to someone that wants to use U.S. Cellular, and use the proceeds to purchase an iPhone that is usable on the wireles carrier you prefer.

I am having trouble with my speakers not working while online in particular on windows.My audio works when playing audio files

I am having trouble with my speakers not working while online particular on facebook. My audio works when playing audio files.

Hi,
Did it happen all the time or sometime?
Please check online browser status:
Click Volume icon in the taskbar, click Mixer link button as below:
If it's fine, follow this guide to run troubleshooter to detect and fix the issue:
Tips for fixing common sound problems
http://windows.microsoft.com/en-in/windows/tips-fixing-common-sound-problems#tips-fixing-common-sound-problems=windows-7
Meanwhile, this similar thread also could be referred:
https://social.technet.microsoft.com/forums/ie/en-US/a4a1cfe5-93a5-4c0b-9bf6-f7db0304f2ba/no-sound-on-youtube-or-any-other-webpage
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

My hdmi adapter not working anymore, no physical damage. Solution?

My hdmi adapter not working anymore, no physical damage. Solution?
Strange is, that i used it several times, it worked fine. Then wothout any reason (like software updete, etc) it just stopped workung, no sync.
I have not changed any parameters of my TV or Beamer.
Hardware:
Ipad 2, Apple Ipad HDMI Adapter, Samsung P2770FH, Optoma HD 65.
Thanks for any help.

I've only used mine a couple of times without any problem, but due to the thinness of the iPad, care has to be taken in inserting the adapter. Slightly wrong angle and it won't go it.
I had a laptop a few years ago where the USB connector failed. I had it replaced under the warantee, The service man told me it was not an uncommom failure on a laptop due to people "torquing" the USB socket while inserting/removing USB items. I have much the same feeling when inserting either the charger cord or my HDMI adapter.
From your description, unless the HDMI adapter failed internally, it sounds like the socket is causing the problem. A few days ago we watch our first movie from the iPad via my ATV2 and "Air Play". Worked great so I don't plan on using the HDMI adapter much at all in the future. Yes, it is a $99 solution, but it works for me. Of course, I already had the ATV2. I doubt if I would buy one just for this abiliity. If nothing else, it seems like a trip to the Apple Genius bar is in order for maybe a replacement unit.
However, with iOS 5 coming out with supposedly total mirroring, it might be worth thinking about getting an ATV2.

HT201210 AUDIO NOT WORKING PROPERLY AFTER INSTALLED IOS7

After installed ios 7
photos not able to see fully
audio not working properly.... [no treble, no depth in sound, very low soung even the volume is full]
get strucks while playing games

This board is full of people that are update crazy...
even when they have perfectly good working systems.
i know i thought well it's just a security update not a major update.
Best advice... whenever updating the OS, unplug all
firewire devices.
will take note of that from now on.
Was this auto-update? Try downloading the file and
running the update again with all firewire devices
unplugged.
While the 828 is disconnected perform the factory
reset
again.
Disconnect the firewire cable from the 828mkII
-Press the Setup knob
-Turn the Setup knob all the way to the right
-Press the Select knob
-Press the Value knob
-Power off the interface and plug the firewire cable
back
in
-Power the interface back on
i have the original 828 not mark 2, so no reset i know of, just power on off.
After the Mac updates... reboot and plugin the 828,
see if that doesn't get you going.
pancenter-
cheers pancenter, i'll give it a whirl updating without the interface plugged in. thanks for all your help.

Paste over at playhead to insert video while retaining audio not working

I am trying to paste "extra" video over my bad video, using the cross dissolve transition between the original and the pasted, and then back to the original video. All this time, I am seeking to have the original audio playing. I have followed the iMovie help directions as to copying the video piece I want to splice in (about 10 seconds long), then selecting the segment of video and audio to past over (9seconds long) and choosing under the advanced menu the paste over at playhead command.
The audio gets screwed up, with pieces not syncing properly. I am using high definition audio/video from a jvc hd camera.
The file I'm working on is about 1 hour long, and I am using an Intel Mac Pro (1 yr. old) with upgraded memory (the paste over at playhead command does work pretty quickly).
The first time this happenned I had extracted the audio, but it happens even on a virgin file without the audio extracted. I've now reinput the virgin footage 3 times as the files are corrupted.
Plus, sometimes the cross dissolve doesn't work. And sometimes the paste over at playhead command just doesn't work, especially if I am trying to add two consecutive "extra" segments of between 10 and 20 seconds. Any ideas? My project requires probably 50 of these pasted video segments as it is a concert with many camera moves (only one camera) which I had hoped to cover with the "extra" video.

Ignore or remove the square character and the question mark at the end, then it takes you to this thread:
http://discussions.apple.com/thread.jspa?messageID=2335104
P.S: Sorry; I have no trouble with Paste over at Playhead, so can't advise.. and am going to have a little holiday.. byeee!

HP Pavilion 15-p117na Beats audio not working

Hi,
Beats Audio will not work on my new HP Laptop. The beats audio setting in control panel is just not functioning.
I have download IDT high definition Audio drivers sp63932.exe & sp63555.exe from hp support site but neither works.
Laptop- HP Pavilion 15-p117na TouchSmart Laptop (Energy Star).
Operating system - Windows 8.1 (64-bit).
Any idea how to fix this?
Regards
This question was solved.
View Solution.

Hi @M-G-R
Welcome to the HP Forums!
It is a superb place to find answers and suggestions!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that you are having an issue with your Beats Audio on your new computer.
Here is a link to the 15-p117na Software & Drivers. I noticed the recommended audio driver for your notebook is
sp69618.exe . Please delete or remove the version you have updated to and install the recommended driver.
When you installed non recommended drivers as they have not been tested on your system the outcome is unknown. They may or may not work correctly.
Here is a link to Beats Audio Console (Windows 8) that will guide you.
Have you done all your Windows updates?
Have you ran the HP Support Assistant to obtain any HP updates.
If you should still have an issue with your new HP notebook please contact HP technical support for assistance.
They can remotely access your system to help overcome difficulties more easily.
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Audio not working. USB ports not working.

My display worked perfectly for a few months. It started when the audio stopped working. The option to use the display audio disappeared from the settings. I made due. Then the monitor started not waking up when I would hit keys on my wireless keyboard. I had to open my macbook pro first, wake it, then the monitor would turn on...then I could shut my macbook. Now the USB ports are not working. This is very frustrating as I have searched the forums..tried everything there and have had zero success. Should I just return this to the store? Please advise. I am tired of dealing with this as the features that are not working are the REASON that I shelled out a grand for this monitor.

As much as I loved the display itself and design of the Thunderbolt (problems asside), I did take mine back to Apple. It was not just the one issue but several which all added up. Having said that I wouldn't give up on it as I'm now missing it compared to my 17" screen on the MacBook Pro which suddenly appears to be puny in size.
Towards the latter part of owning the TB Display, I had a temporary work around which was to utilise the three USB ports on the MacBook which I experienced as being problem free; therefore I plugged a USB Hub into one of the MacBook Pro's USB ports effectively giving me several to use for lesser equipment, then the remaining two USB's on the MacBook Pro I used for more critical higher bandwidth devices like the Bose Companion 5. Then less critical devices OR devices that don't seem to have any problems with the TB Display - I then plugged into the back of the Thundebolt Display. I know you shouldn't have to do this but for the time it seems to help.
Also with regard to another problem I had with sound, see my other post (link below - 5th post down) where I was able to avoid another problem for the time up until I took it back, but this might not have been a permanent solution and I am no longer able to tell for sure.
https://discussions.apple.com/message/17708526#17708526

Audio not working on channel 5 and 7,, okay on all others????

audio not working on channel 5 and 7,, okay on all others????

dalharris wrote:
audio not working on channel 5 and 7,, okay on all others????
Without knowing all of the specifics in your situation, you may want to try these options:
- If you have a DTA, and your remote control has a LANG button on it, press it.
- If you have an HD or SD full cable box:
Most low or no audio issues can be corrected by setting the Optimal Stereo output of the cable box. Here are the steps: Press the Menu button twice on your remote control. Select Setup. Select Audio Setup Under the Optimal Stereo setting, choose "Select to Optimize" and press OK/Select on the remote control
- The audio settings on your cable box may have accidentally been changed:
Press the Menu button twice on the Comcast Universal Remote Control. A new screen below will appear, with the top-left option automatically selected.
Use the down-arrow key (above the Info button) to navigate to Setup and press OK/Select (the center key on the remote control in the middle of the 4 arrow/directional buttons).
Use the down-arrow key (above the Info button) to navigate to Audio setup and press OK/Select.
The Default Audio Track will default to the first option–Channel default–which which is always the channel’s main audio track (unless it was previously changed).
Press the right-arrow navigation key to change the audio track. Changing this selection will instantly change the audio.
1. Press once for English
2. Press twice for Spanish (Español) OR to activate Video Description (DVS)
3. Press three times for French (Français) 4. Press four times for Portuguese (Portugues).
5. Then press the Exit button (above the Volume button) to resume program viewing
Please note: These audio options can only be heard if the program provider or cable channel is providing that additional audio option.
- If the above does not help, look at the remote control for your TV set (not your cable box) as the TVs language settings may have been accidentally changed (sometimes labeled as MTS or SAP on the remote or via your TVs settings menu).

AUDIO PROBLEM WHILE USING OR ALONG WITH WEBCAM

Hi friends,
SUBJECT : AUDIO PROBLEM WHILE USING OR ALONG WITH WEBCAM
I'm not getting any sound while using web-cam.
I tried recording my voice , and played.. i can see my video but audio
Do we have any settings where i need to cross-check to make sure that everything being turned-on ?
My laptop details:-
HP Pavilion dv6 laptop
Operating system Installed - Windows 7
Can someone help me with this?
Thanks
kiran

Hi,
not sure if coincidence or the same question, but the same question got asked internally. The seeded option is required to get the OJSP filter installed. Here's the internal response
ADF View integration with MDS not configured
In web.xml, you need to have mds-ojsp intg enabled to load jspx base + customizations from MDS. In your web project in Jdev, go to ADFv project properties and select “Seeded customization” property. It would enable mds-jsp engine configuration in web.xml. If you want to use user personalization feature at runtime, you would need to select “User customization” property as well which would enable ADFv change persistence config in web.xml.
Warning: Some of the metadata under ... is packaged as part of both WAR and MAR. This metadata cannot be accessed from WAR using MDS.
For these two packages, you are including the files in both WAR & MAR. This warning conveys that since these base files are being put in MAR, at runtime they would be read from mds repository & not from WAR.
Frank

Hdmi does not work since updating to jelly bean

Since updating my at305-16 to JB hdmi will not work . I go into settings and select hdmi out but get no signal on tv.

I think it might be a JB driver issue. I was having the same problem connecting it to my LCD, but when I switched to my plasma it works. The LCD is 1080P Auto the plasma is 720P auto. But fropping my LCD to 7120P didn't help. I don;t know if you have two TVs to try on, but it couldn't hurt.

I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank. I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Y

I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank. I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Yosemite. Please help!

Check out this thread: Downloaded Lightroom CC but only get a quick flash of the startup screen then nothing, Lightroom 5 still working.

I got a iphone 5 but it does not work on my MacBook with Mac OSx 10.5.8 it says i need OSX 10.6.8 but it will not download because I need OSX 10.6 but it would load either. How do I get the older operating system to work with the IPhone5?

I got a iphone 5 but it does not work on my MacBook with Mac OSx 10.5.8 it says i need OSX 10.6.8 but it will not download because I need OSX 10.6 but it would load either. How do I get the older operating system to work with the IPhone5?

You don't. Since you have an Intel Mac, buy a Mac OS X 10.6 DVD from the online Apple Store.
(71894)

The g, h and backspace on my keyboard are not working even after replacing with a new one.

The g, h and backspace on my keyboard are not working even after replacing with a new one. I have also updated my BIOS still d same. Please help me ASAP.
...am waiting for a QIUCK RESPONSE

How does a usb keyboard attached externally work?
You might try a "hard reset" where you remove battery and AC charger, hold down power button 20-30 seconds and then reassemble and turn on. Reset BIOS (F10) to default settings, too.

HDMI Audio not working on Q190 (along with all higher level Audio Formats)

Similar Messages

Maybe you are looking for