HDMI Connect to LG TV. No audio but video is outstandin​g.

I have a Satellite X205-S9810 that I hooked to my LG TV Model# 42LH30-UA using a HDMI cable.  I set the audio output to Realtek HDMI Output but get no audio, only video.  I tried using a RGB monitor cable and a audio cable from the headphone jack to the RGB/DVI audio input.  This kind of works, but when I close and lock the screen into the down position the display coming out on the TV shifts about one inch to the right and I can't adjust it back in.  Any suggestions on how to get both video and audio working at the same time would be greatly appreciated.
Thankyou,
Mark  

Hello,  Have you figured anything g out regarding the HDMI.  I'm having a similar issue with my 305D.  It seems that many are having similar problems, and have yet to fin d a solution.  I'm very disappointed with Toshiba.  The main reasons I purchased this unit (HDMI and SPDIF) don't function properly.  Probably my last Toshiba, unfortunately!
Shannon

Similar Messages

  • Can hear audio, but video blacks out every few seconds; picture comes back when we hit the tv's volume button

    We can hear audio, but video blacks out every few seconds; picture comes back when we hit the tv's volume button. Everything seems to be plugged in well. The picture even starts out being sort of dim. And it goes through phases of working fine but then will randomly start blacking out again.  Any ideas?

    Welcome to the Apple Community.
    Have you tried turning the TV off and on again.

  • Itunes 7, Plays Audio - but video is static or just colors

    after installing Itunes 7.0 my movies play the Audio - but video is static or just colors. also true for new video podcasts, and home moives. Please help!

    Try this
    1. Quit iTunes.
    2. Go to: Start menu > Control Panels > QuickTime.
    3. Click on the Advanced tab.
    4. Un-check the checkbox next to "Enable Direct3D video acceleration".
    5. Open iTunes.
    6. Play the video.

  • Ipod Plays audio but video is tiny

    I have a video that I edited in Final Cut Pro and exported as a .4v file. When I transfer it to my 80 gig Ipod it plays the audio but the video is extremely small on screen. I transfered to a 60 gig Ipod and it played fine.
    Any Thoughts?

    Try not using Final Cut Pro. If you need to use it, export it as mp4 not 4v. After doing that, play the video in iTunes (in a separate window). Is there a black space around the edges of the movie? If so, edit the movie to not have those black spaces.

  • Have audio but video is just a green screen

    whenever i try and watch a video it will give me the audio but wont show the video it just comes up a green screen and thats it. please help!

    Hi,
    Try the following first.
    Start a video playing.
    Right click on the video ( green screen ) and select Settings.
    Remove the tick from the box next to 'Enable Hardware Acceleration' and then click close.
    Refresh the current page and see if the video now plays Ok.
    If the above fails to correct the issue, try a clean installation of the flash plugin/ActiveX as follows.
    First, download the Flash uninstall utility on the link below and save it to your Downloads folder.
    Flash Player Uninstaller.
    When the download has completed, close all browser windows, open your Download folder and run the uninstaller.  After this has completed, restart the notebook.
    When windows has reloaded, download and install the latest version of Adobe Flash.  Note: You may want to deselect the option to include McAfee Security Scan Plus before downloading.
    When the installation has completed, restart the notebook.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Hearing Audio but Video not showing

    I just upgraded to the newest quicktime and or some reason I can only hear the video being played but I cannot see it. The videos are avi files and recently I've been having problems playing my avi files on quicktime. I only just got my avi files to work at all only they worked on windows media player. I tried playing them through quicktime but they would not work, even with having the right codecs (divx). So I updated Quicktime with the latest update and now as I stated, I can hear the audio but the video is not being displayed. Can someone please help with this or is this just another quicktime bug I'll have to wait for them to fix? I would go and downgrade but I fear if I do, my avi files will cease to work at all.

    Unless something has changed DivX is support by QT for Mac only and not QT for Windows. This link might be of help with avi's http://www.headbands.com/gspot/

  • Video Ipod 30 GB, I can hear the audio but video won't play

    Hi,
    I got the 30 GB Ipod around a year ago but never really used it (don't ask why). Anyway two days ago I decided to upload my songs and videos onto it. The videos I've got play on my computer on quicktime (they're mp4), but when they're uploaded onto my ipod I can only hear the audio, but I can't see the video. I'm hoping someone can help!
    Thanks

    Hi, I have the opposite going on with my Ipod. I hardly use the video function for my ipod, I had 1 video on there that took forever to get right, so I gave up. But now I have 2 more and I can't hear the audio but can see the video. The video that I had originally I can hear, but don't remember what I did to hear it, Can you help me?

  • HDMI connected to work flatscreen not displaying, but detected

    Hi all.
    I'm having an HDMI output problem on a MacBook pro retina, just got it a couple days ago.
    When I connect to the flatscreen in the conference room (Toshiba) via HDMI, the mac screen does it's resolution-switching blue flicker, and I get, in the displays prefs, confirmation of the fact that it sees the Toshiba. However, no image on the Toshiba.
    I consider myself a pretty adept wrangler of these things and I'm stumped. Things I've tried:
    * Running in forced dedicated card mode
    * Running in forced integrated card mode
    * Scaling to all the available resolutions (believe me I tried every combo)
    * Trying all the refresh rates
    * Plugging in another Macbook (one with an mini dongle to HDMI) and it works fine, so input is correct, etc.
    * Trying mirrored
    * Trying non-mirrored
    * Rebooting the TV
    * Rebooting the computer
    * Made sure all the update are applied (including the displays firmware one)
    * Blowing on the cables (I'm superstitious)
    I'm considering animal sacrifice.
    Any thoughts? It seems like getting rid of a dongle should simplify, not complicate things!
    jm

    Sorry ilesal, I was referring to the OP. The solution that worked for me was enabling 'dynamic switching' in gfxCardStatus. However, that was the first option the OP tried, so I'm sorry I cannot help
    On the bright side, I have had nothing but success with Apple Customer Support. My two previous rMBPs were faulty (I'm on my third now - finally got one without software or hardware problems) and I had no problems exchanging them for brand new units, even when outside the 14-day grace period. If you have the possibility to go to an Apple Store in your area, and if you can stand to deal with the "Geniuses", I think it might be worth your trouble. Good luck!

  • IChat with audio but video NOT working.

    I have been using iChat regulary for almost a year now with no problems whatsoever. Suddenly I cannot get a video conference going with my brother. Whether he or I initiates it it does the same thing. The conference is initiated each of us seeing a box with ourselves in it. Then when it is supposed to shoot yourself up into the corner and make you small and the other person pops up, I freeze and shoot to the corner as a frozen image. I see him just fine, but he continues to see only himself and he can HEAR us just fine. I have successfully chatted with 2 other people right before and after. I also tried to do a multi-person chat and it worked fine between myself and the third person, but as soon as my brother popped on (he took a bit longer to respond) I froze but I could still see and hear him and the other person just fine, and they could see and hear each other. But neither could see me. It also works fine between just him and another person. What in the world is going on?!?

    Hi Angleafx,
    Welcome to the Apple Discussions
    Could be several things.
    1) DO basic Maintenance at your end.
    See the links to Cocktail http://discussions.apple.com/thread.jspa?threadID=122021
    MacJanitor is a specific Utility for running the Cron Scripts.
    After this it may be your ISP is doing something to your Connection speed that effects the Bandwidth.
    Is you brother on a connection speed that is vastly different from your other contacts ?
    9:33 PM Wednesday; August 22, 2007

  • Airplay - I have audio but video is not sent to ATV2

    I am trying to use Airplay on my iPad to send a movie to my tv. However, all it will send is the audio. How do I get it to send the video as well?

    Hi Robert,
    Try the ATV support help here.
    http://www.apple.com/support/appletv/
    Carolyn

  • Is there a way to turn off skimming - not just audio, but video as well?

    Or do I need to re-install my old imovie? If so, will it work on 10.5?
    thanks!

    Sorry - wasn't specific enough - imovie 7.1.1 from ilife 08 is what I'm running now, and I had imovie HD 6.03

  • Why is audio fine on export but video is white?

    Hey all, I'm brand new to the forum but I need a little help.
    I am doing some editing work from home for a website. The clips I am receiving are coming in mp4 compressed. The clips need to go into Avid Media Composer running on pc windowsXP in 720p project. The mp4s are around 800mb each full 1 hour shows compressed. When injested into Avid clips obviously look horrible. I was told to take into quicktime then export w/ DVCpro/NTSC codec which is the native codec to the pre-compressed clips. When I used the settings given I get fine audio but video is all WHITE. Export is fine w/ any other settings but DVCpro. I was told to try perian codecs download but I was having trouble finding a PC version.
    Any thoughts, ideas? Any help would be very appreciated!

    Hello,
    I am having the same problem. Yesterday I could hear only audio without video picture but today, I can not watch videos even on apple page. It offers to open video with divix. I tried to unnistall quick time player by moving it to the trash, I know now that was bad idea. After that, I uploaded quick time player 7 but nothing happens. I appreciate any help.
    Thanks

  • AVI Files import audio fine, video does not playback correctly

    Premiere Pro CS4 imports my AVI file's audio, but video playback does not match up; that is, the audio will playback until finish, but it appears that the video portion only reaches the third or fourth frame of the video! All other video formats import just fine.
    This issue did not occur in CS3.
    I use Windows XP SP3.

    Thanks to everyone for your responses. I solved the problem by installing the proper codec (LEAD MJPEG).
    Now I have another problem -- when scrubbing through videos, it seems as if the audio doesn't follow the cursor. That is, if I scroll to the MIDDLE of a video, I hear audio from the BEGINNING of the video, as if I had just paused and resumed.
    What could be the problem here?? This appears to happen for DivX movies, which I actually don't use often. But still, this would be a nice problem to solve.

  • I have HDMI connection to the receiver and on to the TV - but no audio from my new Apple TV.  I have checked all connections and the video is xlnt.  Have also toggled thru every possible Dolby/Audio combination in settings.  Help!  Any suggestions?

    I have an HDMI connection to the receiver and on to the TV - but there is non audio from my Apple TV.  Not for movies, music, YouTube etc.   I have checked all of the connections and the video is xlnt.  Have also toggled thru all possible Dolby/Audio combinations in settings.  Help!  Any suggestions?

    Hello again Parker -
    The basic setup is Digital Cable Box, DVD Player, Denon Receiver/Amp and TV Monitor.  To that I added the Apple TV.  The Receiver only has two HDMI IN slots (one for cable and one for the DVD) and one out to the Monitor. 
    [I bought a switcher to toggle the DVD and the AppleTV back and forth but just disconnected the DVD to simplify when I ran in to trouble.]
    So now I have:
         HDMI from the Cable Box to the Receiver
         HDMI from the Apple TV to the Receiver (in the old DVD slot which always worked well)
         HDMI from the Receiver to the Monitor
         RCA's from the Receiver to the Subwoofer and the other speakers
    In addition I have some backup connections:
         S-Video, Optical Audio and L/R RCA's from the Cable Box to the Receiver
         S-Video from the Receiver to the Monitor
    Wait - JUST FOUND IT! 
    By going thru the excercise to track all of the connections per your suggestion, I found an anomaly when I switched Receiver sockets for the HDMI links.  The video moved but the audio didn't.  Turns out the monitor was using the optical audio feed from the receiver.  So I disconnected the optical audio and the monitor automatically switched to the HDMI audio feed!   Looked promising...
    So I first connected an optical audio feed from the ATV to the receiver - Audio!  Then I pulled it, but the audio didn't switch to the HDMI feed.  It stopped.  Would be OK if all I was going to use is the ATV, but I need the DVD player too and I can't use a switcher to toggle between them if I have to unplug the optical audio each time.
    This is becoming a career!  Any suggestions?
    Will

  • I have the mini display port cable to hdmi.  When I connect I can get audio but on the video I get the display auro screen and can't get my actual display to show as that is not what shows on my display.  How can I fix this?

    I have the mini display port cable to hdmi.  When I connect I can get audio but on the video I get the display auro screen and can't get my actual display to show as that is not what shows on my display.  How can I fix this?

    System Preferences>Displays
    There is a little white bar. When you have your TV connected, move the white bar to the other display. Your main desktop is now the TV screen

Maybe you are looking for

  • Printing same smartform with different set of records continuously.

    Hi SDNer, Suppose a table contain Studet info like the following one: ID   Name    Sub1       Sub2     Sub3 1    xxx        sb11       sb12     sb13 2    yyy        sb21       sb22     sb23 3    zzz        sb31       sb32     sb33 Think that the smar

  • B&W Background with a Colourized subject....

    After a year of using FCE, I've upgraded to FCS2, and I'm excited. These new features/apps look promising.... I'm hoping that someone can give me advice or point me in the right direction for a tutorial. Next week I begin filming a short documentary.

  • Flattening a  PDF Form

    Is there a service I can use that will convert a PDF Form to a non-form PDF similar to what you would get doing a print to PDF in Acrobat?

  • I'm using Ubuntu 11.04 The firefox menu-bar is on the top of the screen - how can I get it into the firefox window?

    Maybe I'm an idiot - this does seem a very simple issue. I can right click on the tab bar and check things like Navigation Bar, or Add-on bar and they all work fine - but the menu bar is stuck on the top of the screen and appears when I role over it.

  • Survey not creating inbound activity when submitted

    I am using CRM 5.0 and I have created a survey, generated the URL using BSP and attached it to an email and this has been sent as part of a campaign. The recepient answers the survey and hits save, but there is no activity generated, even though we g