Hdmi connection to tv no longer works after update to mavericks what can I do?

My HDMI cord is attached an works fine. I upgraded to Mavericks and the display came up on my TV. Now today it won't come up. I rebooted and no better! Any suggestions?

Hi BBruins11,
If you are having issues with an external HDMI display after a recent upgrade to Mavericks, you may find the troubleshooting steps outlined in the following article helpful:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Regards,
- Brenden

Similar Messages

Download helper add-on no longer works after update of firefox, what has changed?

After I updated Firefox to 18.0.02 the download helper stopped working on 98% of the websites I watch TV programs on. What has changed and will it be returned to its previous condition?
The website I go to is: http://www.free-tv-video-online.me/internet/

Are you using an add-on as a download helper?

IPhoto no longer work after upgrading to Mavericks.

My iPhoto will no longer work after upgrading to Mavericks. iPhoto will not update. How do I fix this?

kmg55 wrote:
Just upgraded and Iphoto will not work,
Check that iPhoto is v9.5.1 (In Applications, highlight iPhoto, and ⌘I)
If it is v9.5.1, then hold option-command and click the iPhoto icon and go through the repair steps.

After updating to Mavericks I can't open iTunes. I keep getting a popup telling me to unclick "run in 32- bit mode" in iTunes info. I have done that several times and rebooted. Everything else seems to be working fine.

After updating to Mavericks, I can't open iTunes. I keep getting a pop up telling me iTunes needs to run in 64-bit mode. After following directions several times to go to Finder, iTunes, Get info and "unclick 32-bit mode" it still won't work and i keep getting the smae pop up window. I've rebooted several times also.

What version of iTunes do you have? The current version of iTunes for Mavericks is 11.1.5 and the default mode is 64 bit. If "Open in 32 bit mode" is checked and you cannot uncheck it are you logged on using an account with administrative priveleges?

After update to Mavericks I can't open disc drive from keyboard

Hello
After update to Mavericks I can't open disc drive from keyboard on my Mac Pro.
I found the only way to do this is via disk tools , there I can eject my disc drive - seems now to be the only way - should not be like this.
Any idea , Please??

I used to use 2 keyboard keys - It now works with only 1.
So it works now , but different.
Thank you.

After updating to Mavericks, I can't seem to open files to attach to gmail messages.

After updating to Mavericks, I can't seem to open files to attach to gmail messages. I can still drag and drop into them, but I'm unable to click on my documents through the paperclip icon on the bottom of composing my message. Anyone else know a solution or facing the same issue?
Thanks!

Select
View ▹ Show View Options
from the menu bar. In the dialog that opens, select
Arrange by: None

Canon iP2700 is no longer working after update

My Canon iP2700 is no longer working after doing an update yesterday. I am using the cnijfilter-ip2700series 3.30-2 from https://aur.archlinux.org/packages.php?ID=41797 with cups 1.5.2. I have blacklisted usblp, but this doesn't help. My printer is recognized, and apparently I can print but nothing happens. This is my error log:
tail -n 100 -f /var/log/cups/error_log
D [09/Mar/2012:13:58:16 +0200] [Job 4683] usb_find_busses=0
D [09/Mar/2012:13:58:16 +0200] [Job 4683] usb_find_devices=0
D [09/Mar/2012:13:58:16 +0200] [Job 4683] STATE: +connecting-to-device
D [09/Mar/2012:13:58:16 +0200] cupsdMarkDirty(-----S)
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Printing jobs and dirty files"
D [09/Mar/2012:13:58:16 +0200] [Job 4683] STATE: -connecting-to-device
D [09/Mar/2012:13:58:16 +0200] cupsdMarkDirty(-----S)
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Dirty files"
I [09/Mar/2012:13:58:16 +0200] [Job 4683] Waiting for printer to become available.
D [09/Mar/2012:13:58:16 +0200] cupsdAcceptClient: 16 from localhost (Domain)
D [09/Mar/2012:13:58:16 +0200] cupsdReadClient: 16 POST / HTTP/1.1
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [09/Mar/2012:13:58:16 +0200] cupsdAuthorize: No authentication data provided.
D [09/Mar/2012:13:58:16 +0200] cupsdReadClient: 16 1.1 Get-Notifications 1
D [09/Mar/2012:13:58:16 +0200] Get-Notifications /
D [09/Mar/2012:13:58:16 +0200] cupsdIsAuthorized: requesting-user-name="irenke"
D [09/Mar/2012:13:58:16 +0200] Returning IPP successful-ok for Get-Notifications (/) from localhost
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [09/Mar/2012:13:58:16 +0200] cupsdReadClient: 16 WAITING Closing on EOF
D [09/Mar/2012:13:58:16 +0200] cupsdCloseClient: 16
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
And this part keeps repeating every 5 seconds with different timestamp, until I delete the document from queue.
The CUPS ownership of the USB device file seems OK:
ls -l /dev/bus/usb/001/006
crw-rw---- 1 root lp 189, 5 Mar 9 14:17 /dev/bus/usb/001/006
I've been working on this problem since yesterday and now i'm stuck. Can someone please help?
EDIT
I think it's something related to the driver. If i change the driver to another printer model from CUPS the printer works. Prints garbage, but at least works. So this means that we have to wait for a new driver or what?
Last edited by otx (2012-03-09 14:21:27)

See if this is any help: https://bbs.archlinux.org/viewtopic.php?id=136415

Firefox no longer working after update to 19.0.2

Firefox no longer works after auto update to 19.0.2

Hello vinaysingh, check if your Internet security software (including firewalls, antivirus programs, anti-spyware programs, and more) preventing Firefox from connecting to the Internet.
see for more info : [https://support.mozilla.org/en-US/kb/fix-problems-connecting-websites-after-updating#os=win7&browser=fx19 Fix problems connecting to websites after updating Firefox]
thank you

BlackBerry Classic front camera no longer works after update

The front camera on my BlackBerry Classic no longer works after the 10.3 update. The BBM video chat does not work either - error message, another application is using the camera. I tried rebooting and a factory reset and the problem still persists. Please help.

Hi,
the Classic was shipped already with 10.3
What 10.3 version do you mean exactly?
Alex
Please feel free to hit "Like" if my post was helpful :-) Thank You!

USB ethernet connection via switch no longer works after installing Mountain Lion

Since installing Mountain Lion, I have no longer been able to use my USB ethernet connection via an ethernet switch. I have deleted and re-added the connection in preferences. The connection reads "Connected" but it is not working as connected (unless I bypass the switch and plug directly). I have tried doing this with two different switches to no avail. Does anyone have a solution? Thanks.

I Read this sollution elsewhere on these forums and found that this worked for me.
However, the "load" time in Safari is not as fast as it used to be. Might be due to some router setting.
Solution:
For all the Dutch users that have a KPN Experiabox router:
1) go to http://192.168.2.254
2) Username: KPN Password: leave empty (You might have changed this yourself)
3) Go to Network (at the top)
4) Go to WLAN (at the left)
5) Set as follows:
Enable WLAN: Enable
Mode: IEEE 802.11g Only
Channel: 7
Transmitting power: 100%
Enable WMM QoS: Disable
This fixed my wifi problems. Good luck

Airport no longer works after update.

I occasionally use my imac as a base station to connect a laptop to the internet via airport. Since installing the recent security updates my laptop can no longer see a network (I also connect via a pda and this no longer works either).
Airport indicates full signal strength but clearly there is no network.
Tried deleting prefs but still wont work.

Hi there BDAqua...
I used this Pacifist software and followed instructions on this thread, rebooted, nothing seemed to change. Repaired permissions, nothing changed... I thought, oh well! Maybe I'll go to my local (Warsaw Poland) Apple repair centre.
Sadly, I put my computer to sleep, about an hour later, opened it up with ethernet cable attached for internet, and noticed the wireless icon was now dark... lo and behold, clicked on it and my network was checked (this after having had my password "rejected" a million times before) and ... I carefully slipped the ethernet cable out of the socket... and I was still connected.
So my wireless is working again, since doing all that stuff (back to prior firmware version) but for the life of me I don't know why, since it didn't seem to be fixed immediately after all that tinkering and rebooting! Any thoughts?? Did I actually do something that fixed it (must be, since I finally fooled around with it after almost 3 weeks of no wireless) or was this just random??
This is far too un-Apple-ish, by the way! I was used to this with PCs, but first time I've ever had to get so technical with my Mac!

Gmail Push no longer works after update to iOS 4.2.1

I have tested this several times. What previously worked as push yesterday no longer works as push from my Gmail account today after updating to 4.2.1. Is anyone else having this issue? In order to get mail to show up on my phone, I have to go into Mail on my phone. Then the little connecting thing starts up and all the mail since the last time I checked appears.

This may be related -- I just updated my iPhone to 4.2.1 from 4.1. I immediately found that my Google Apps accounts, which had been configured as vanilla IMAP in Mail.app and successfully synced with iPhones as such for the past couple of years, have now started to sync with my iPhone as gmail accounts (not plain IMAP) and have therefore completely lost the custom From addresses, as it seems the iPhone does not allow custom From addresses in gmail accounts. (The accounts list in iPhone mail now has little red gmail icons instead of the generic blue account icons.) It also seems that push no longer occurs, whereas it certainly used to.
Deleting all of the mail accounts from the iPhone, power-cycling the iPhone and then freshly syncing mail accounts from iTunes results in the same outcome. It is as though the iPhone is looking at the IMAP/SMTP settings and inferring that since they end with .gmail.com that the accounts are of type gmail, regardless of the fact that I have said that they are plain old IMAP. (It is tempting to create a noddy domain with CNAMEs pointing at {imap,smtp}.gmail.com just to fool the iPhone however it would probably then complain about invalid SSL certificates.)
I deleted one of the accounts and recreated it manually on the iPhone. This lets me create a plain IMAP account even with {imap,smtp}.gmail.com server names, however when editing the address field, the keyboard which appears is bizarre -- no comma key! (Yes, I searched the various modifier keys, etc.) So, I copied a comma into the clipboard, pasted it into the middle of two From addresses and was at least mildly relieved to find that the mail program did then let me choose between the addresses. However, given half a dozen Google Apps accounts and a plethora of custom From addresses, there is no way that I am going to create this stuff manually. Maybe I will give that CNAME trick a go after all...
My iPad on 4.2 is fine, however I have a hunch that I have not since resynced mail accounts to it since updating. I'll certainly not be daring to do that now.

Printer no longer works after upgrading to Maverick

I have an Epson TX810FW, multifunction printer/scanner. It wwas working fine until I updated to Mavericks. I now get a message that the scanner function is not supported and I cannot get the printer to work. I need both working, and I have loaded all the latest updates from Epson up to 2.15.1.
Can someone provide an answer that will restore the mrinter to fully operational? Otherwise, how can I reomve Mavericks, as the loss of functionality is more of a downside than any enhancements that Mavericks might claim.

Hi,
I've been experiencing a similar issue with my old, yet working until Mavericks update, OKIPage 14ex. No problem at all with both Lion and Mountain Lion but after Mavericks update the printer cannot print any longer. The printer is connected via a regular USB port, the system recognizes it, I can send a print to its queue but as soon as the print is enqueued the printer goes into hold status and nothing can be done to resume the print.
Since the printer model is quiet old, no driver is avaliable from OKI support, however I'm wondering what Apple did with this update thus being able to produce such a mess.
Of course I tested the printer conncted to another PC and it perfectly works!
I would really appreciate some advice in order to restore the previous situation.
Many thanks.
Marco

Airport Express b/g no longer working after update to Airport Utility 5.3.1

after updating to this the other day, my AE b/g no longer works - like many others on the forum, i get the flashing amber / yellow blinkie light situation. i can hard reset it and get it to initially show up in AU 5.3.1, but once i try to join it to my wireless network (i use it with my laser printer) it never takes, disappears from AU, and sits there flashing relentlessly.
seems pretty clear that it's related to the 5.3.1 update - it was working fine for nearly 2 years without any issues prior to this. i find it hard to believe it had a total failure related to this - in fact, i just finally updated yesterday after being asked to for 2 weeks, and that's when it stopped working, no question about it.
any ideas on getting it to work? i've tried everything on these forums to no avail. or am i stuck waiting on AU 5.3.2?

I just solved the same issue. First I reset my whole network from scratch by hard resetting all devices (1 AEBS N and two AXg). Then I started configuring my main base station and added the other devices to the network one by one. (I have a WDS). Only after setting all the devices to channel 6, did the green light stay on.
Apparently when you configure a AX to participate in an existing WDS network and you enter the existing network name in the configuration panel of Airport Utility, it creates a separate network with the same name. In order to force it to join the existing network, make sure their Airport ID numbers are entered under the WDS tab in Airport as WDS remotes.
Check this thread for the details: http://discussions.apple.com/thread.jspa?threadID=1440997

Import form cam no longer works after Update to iLife 09

Hi, I've updated to iLife 09 and installed the most recent patches. With iLife 08 my Fujifilm Finepix F30 was recognized by my mac book pro, iPhoto starded up an the contet of the cam was presented for import as soon as I connected it by USB. With iLife 09 all this no longer works. iPhote is fired up but nothing else happens but that iPhote freezes so the only thin I an do is to kill it ... now it's more or less useless for me
Please help !
TIA
frantek

Start with the troubleshooting basics:
1. Delete the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
2. Repair Permissions using Disk Utility
3. Create a new account (systempreferences -> accounts) and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.
Regards
TD

Hdmi connection to tv no longer works after update to mavericks what can I do?

Similar Messages

Maybe you are looking for