HDMI connector failed after a shot of static electricity

I was getting ready to show a movie on my PlayBook via the HDMI connection to my TV. Everything was running fine until I reached down to stop the movie on the PlayBook. A good shot of static was heard and felt. Although I can still view the movie on the PlayBook, the HDMI connection no longer works. I have been using this method successfully for sometime without problems until a few days ago. The PlayBook appears to be fine otherwise, just a dead HDMI connection.
Has anyone had a similar experience and is there a fix?

Static can ruin things fast
as for a fix, you might need a new mother board but on ebay there are 64 gig models selling for 100 USD
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Similar Messages

PeopleSoft connector failing after upgrade

Has anyone heard of the Peoplesoft connector failing to connect after a PeopleTools upgrade? We have 9.1.1.5 of the Peoplesoft User Management Connector installed. Prior to the upgrade of PeopleTools, it was on version 8.50.09 and we were able to connector and provision users. After the upgrade to PeopleTools 8.50.16, we cannot connect. Below is a piece of the log file where we are getting this error:
DEBUG,18 Apr 2011 11:03:33,015,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoader:findClass - Data: loading class - Value: oracle.iam.connectors.psft.usermgmt.integration.PSFTUMUserProxyProvisionManager
DEBUG,18 Apr 2011 11:03:33,026,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoader/findClass entered.
DEBUG,18 Apr 2011 11:03:33,026,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoader:findClass - Data: loading class - Value: psft.pt8.joa.API
DEBUG,18 Apr 2011 11:03:33,027,[OIMCP.PSFTUM],oracle.iam.connectors.psft.usermgmt.integration.PSFTUMUserProxyProvisionManager : getConnectionWithTimeout:: STARTED
DEBUG,18 Apr 2011 11:03:33,027,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoader/findClass entered.
DEBUG,18 Apr 2011 11:16:09,519,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoader/findClass entered.
DEBUG,18 Apr 2011 11:16:09,519,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoader:findClass - Data: loading class - Value: bea.jolt.JoltVersionException
DEBUG,18 Apr 2011 11:16:09,522,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoader/findClass entered.
DEBUG,18 Apr 2011 11:16:09,523,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoader:findClass - Data: loading class - Value: psft.pt8.joa.PSMessage
ERROR,18 Apr 2011 11:16:09,524,[OIMCP.PSFTUM],====================================================
ERROR,18 Apr 2011 11:16:09,524,[OIMCP.PSFTUM],oracle.iam.connectors.psft.usermgmt.integration.PSFTUMUserProxyProvisionManager : getConnectionWithTimeout : Unable to connect to Application Server. Try :: 1
ERROR,18 Apr 2011 11:16:09,524,[OIMCP.PSFTUM],====================================================
ERROR,18 Apr 2011 11:16:09,524,[OIMCP.PSFTUM],====================================================
ERROR,18 Apr 2011 11:16:09,524,[OIMCP.PSFTUM],oracle.iam.connectors.psft.usermgmt.integration.PSFTUMUserProxyProvisionManager : getConnectionWithTimeout : Previously created Session Destroyed : 1
ERROR,18 Apr 2011 11:16:09,524,[OIMCP.PSFTUM],====================================================
DEBUG,18 Apr 2011 11:16:09,524,[OIMCP.PSFTUM],oracle.iam.connectors.psft.usermgmt.integration.PSFTUMUserProxyProvisionManager : getConnectionWithTimeout:: FINISHED
INFO,18 Apr 2011 11:16:09,524,[OIMCP.PSFTUM],oracle.iam.connectors.psft.usermgmt.integration.PSFTUMUserProxyProvisionManager : connect : Connect = false
ERROR,18 Apr 2011 11:16:09,524,[OIMCP.PSFTUM],====================================================
ERROR,18 Apr 2011 11:16:09,524,[OIMCP.PSFTUM],oracle.iam.connectors.psft.usermgmt.integration.PSFTUMUserProxyProvisionManager : connect : Maximum Retries Reached. exiting........
ERROR,18 Apr 2011 11:16:09,524,[OIMCP.PSFTUM],====================================================
DEBUG,18 Apr 2011 11:16:09,524,[OIMCP.PSFTUM],oracle.iam.connectors.psft.usermgmt.integration.PSFTUMUserProxyProvisionManager : closeSession:: STARTED
DEBUG,18 Apr 2011 11:16:09,525,[OIMCP.PSFTUM],oracle.iam.connectors.psft.usermgmt.integration.PSFTUMUserProxyProvisionManager : closeSession : Session Closed : true
DEBUG,18 Apr 2011 11:16:09,525,[OIMCP.PSFTUM],oracle.iam.connectors.psft.usermgmt.integration.PSFTUMUserProxyProvisionManager : closeSession:: FINISHED
ERROR,18 Apr 2011 11:16:09,530,[PSFTUM],====================================================
ERROR,18 Apr 2011 11:16:09,530,[PSFTUM],oracle.iam.connectors.psft.usermgmt.integration.PSFTUMUserProvisionManager : createUser : Connection Failed
ERROR,18 Apr 2011 11:16:09,530,[PSFTUM],====================================================
DEBUG,18 Apr 2011 11:16:09,530,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/setAdpRetVal entered.
DEBUG,18 Apr 2011 11:16:09,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/getRetValString entered.
DEBUG,18 Apr 2011 11:16:09,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/getRetValString - Data: class - Value: java.lang.String
DEBUG,18 Apr 2011 11:16:09,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/getRetValString - Data: poRetVal.toString() - Value: PSFT.CONNECTION_ERROR
DEBUG,18 Apr 2011 11:16:09,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/getRetValString - Data: Returning:sRetVal - Value: PSFT.CONNECTION_ERROR
DEBUG,18 Apr 2011 11:16:09,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/getRetValString left.
DEBUG,18 Apr 2011 11:16:09,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/setAdpRetVal - Data: Setting Adapter Return Value to PSFT.CONNECTION_ERROR - Value:
DEBUG,18 Apr 2011 11:16:09,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/setAdpRetVal left.
OIM: 9.1.0.2
Any ideas?

You will have to use the new psjoa jar. See the connector documentation for compatible psjoa jar.

AD connectors fail after Update Rollup 5 installation

Colleagues,
We have SCSM 2012 R2 in our organzation and recently installed Update Rollup 5. After that we've started expiriening problems with AD connectors. They can finish with errors or not finish at all and be in running state for the whole day. The only solution
is to restart HealthService and re-syncronize connectors. Connectors recreation didn't help. Also there are no relevant logs in event viewer. Do you have similar problems after UR5 installation or any ideas how this can be troubleshooted and fixed?

Hi,
Will you please try to re-install UR5?
Make sure you install it with order :
1. DataWarehouse Server
2. Primary Management Server
3. Secondary Management Servers
4. All Analyst consoles
5. Self-Service Portal
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Ok so I use an hdmi connector on my iPhone 4S to watch netflix. But after I updated to iOS 7 it will not work my tv doesn't receive a signal. Does anyone have any insure to this please help .!.!.

Ok so I use an hdmi connector on my iPhone 4S to watch netflix. But after I updated to iOS 7 it will not work my tv doesn't receive a signal. Does anyone have any insure to this please help .!.!.

The 8 pin Lightning connector can only output 720p and lacks all iPod Out functionality unlike the full iPod Out functionality and 1080p that the 30 pin connector has and I suspect that they are coding iOS 7 specifically for the new devices which have severely reduced abilities and perhaps skipping adding the code needed for 30 pin devices to use their functionality with HDMI, etc.

IPad 2 hdmi connector problem

Just bought a hdmi connector tonight with the intention of watching Netflix. Video works great. However, the audio is not working. Static is so bad I can't hear anything. Is there a problem with my setting or is my iPad defective???

Thanks for the reply. I keep looking for the "Preference Tab" but there is none.
Just ion case
I am building the slide show on the Ipad 2
I am running the latest updates in Keynote and my IPad 2
I do see the "setting" with in the keynote app but nothing in there.
Thanks

Remote fails after several days

I'm running ZFD 3.2, on a Netware 5.1 (sp5) box with eDir 85.27c.
When I
import a workstation, it will work perfectly for a few days, but then
it
fails to respond to Remote Control. I can still do Chat, and pinging
the
agent gives perfect success. When I do attempt to connect it gives
the
message:
The Remote management agent was unable to locate the workstation in
NDS.
I can delete the workstation and re-import it, and it will work again,
but
fail after a few days time. I applied all the ZenWorks support packs
to the
clients and the server, and I am running the latest snap-ins for
ConsoleOne.
This server is the master of the replica.
Any tips would be appreciated. I went through everything on TID
10013987
and none of it has fixed the problem. Thanks.

Running a mixed IP/IPX environment, all on static assigned IPs. We're
also
using SLP with a Scoped list.
"Jared L Jennings" <[email protected]> wrote in
message
news:PaY5a.1250$[email protected]..
> Are you running pure IP?
> Is your network DHCP?
>
> --
> Jared L Jennings, CNE 5,6
> Using XanaNews 1.13.2.10

Mathematical Script fails after protecting & saving PDF

Hello, we are creating a form which includes a small graph to calculate a difference in two portfolios' Risk and Return %'s. We want to be able to protect and save the document. We, also, would like to re-open the document at a later point and update the values. Our script works fine when we enter the values, protect and save it; however, it fails after we re-open it with the password and enter the value; eg. it will simply show the previous calculated value. Thank you for any input on fixing this issue.

Just a follow-up comment from my partner:
"we are password protecting and the calculated value becomes static when removing password"
- and here is a copy of our formula too if it helps:
ROR_difference.rawValue = ((ROR_Proposed.rawValue - ROR_Current.rawValue) / ROR_Current.rawValue)
Thanks!

Malloc fails after 3.8 GB when jvm is loaded on SunOS 11

All,
I have a very simple c++ program that dynamically loads the jvm and in a loop tries to allocate memory in chunks of 512K. The malloc fails after about 3.8 GB is consumed. I don't use the jvm in any way other than just loading it. If I specify a java max heap size of 4096 MB I can allocate up 29 GB and then the malloc fails. If I subsequently increase the max heap size to 32GB then I can allocate more than 100GB.
What is interesting is that this happens only on SunOS 11. Also it happens with java 1.6.0_26 and java 1.7 but not with java 1.6.0_22. If I don't load the jvm everything runs fine. This simple program runs without issues on SunOS 10, linux and windows with java 1.7.
I have used truss with this program and I get the following output
/1: nanosleep(0xFFFFFD7FFFDFF600, 0x00000000) = 0
/1: brk(0xEAAEC000) = 0
/1: nanosleep(0xFFFFFD7FFFDFF600, 0x00000000) = 0
/1: brk(0xEABED000) = 0
/1: nanosleep(0xFFFFFD7FFFDFF600, 0x00000000) = 0
/1: brk(0xEACEE000) Err#12 ENOMEM
This machine has 256GB of memory. I have been scratching my head for a while now and any help will be greatly appreciated.
Pauli
Edited by: 948514 on Jul 24, 2012 3:01 PM

Find below the complete code that is encountering this issue
#define MAX_MEMORY 10*1024*1024
#define ALLOC_SIZE 512
#define MAX_JAVA_HEAP "-Xmx256m"
#define REPORTING_INTERVAL 1000
#define USE_JAVA_VM 1
#ifdef _WIN32
#include <winsock2.h>
#include "win_dlfcn.h"
#else
#include <dlfcn.h>
#endif
#include <jni.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <string>
#include <iostream>
#include <list>
using namespace std;
//On Windows the JNI_CreateJavaVM function is called with __stdcall convention
#ifdef _WIN32
typedef jint (__stdcall jniCreateJavaVM_t) (JavaVM *, void **, JavaVMInitArgs *);
typedef jint (__stdcall jniGetCreatedJavaVMs_t) (JavaVM *, jsize, jsize *);
#else
typedef jint (*jniCreateJavaVM_t) (JavaVM **, void **, JavaVMInitArgs *);
typedef jint (*jniGetCreatedJavaVMs_t) (JavaVM **, jsize, jsize *);
#endif
static void *s_jvmLibrary = NULL;
static JavaVMInitArgs s_vmArgs = {0};
static JavaVMOption *s_vmOptions = NULL;
string maxHeapSize = "-XmxMAX_JAVA_HEAP";
void *
GetJavaVMLibrary()
std::string jvmLibrary;
const char *pjvmLibrary = getenv("JAVA_HOME");
if (!pjvmLibrary || !*pjvmLibrary)
std::cerr << "JAVA_HOME has not been set" << std::endl;
exit(1);
jvmLibrary = std::string(pjvmLibrary) + "/";
#if defined(WIN64)
          jvmLibrary.append("bin/server/jvm.dll");
#elif defined(WIN32)
          jvmLibrary.append("bin/client/jvm.dll");
#elif defined(__sparc__) && defined(__sun__)
          jvmLibrary.append("lib/sparcv9/server/libjvm.so");
#elif defined(__x86_64__) && defined(__sun__)
          jvmLibrary.append("lib/amd64/server/libjvm.so");
#elif defined(__i386__) && defined(__linux__)
          jvmLibrary.append("lib/i386/server/libjvm.so");
#elif defined(__x86_64__) && defined(__linux__)
          jvmLibrary.append("lib/amd64/server/libjvm.so");
#else
          jvmLibrary = "./libjvm.so";
#endif
std::cout << "jvmlibrary is " << jvmLibrary << std::endl;
#ifndef RTLD_GLOBAL
#define RTLD_GLOBAL 0
#endif
void * s_jvmLibrary = dlopen(jvmLibrary.c_str(), RTLD_LAZY | RTLD_GLOBAL);
if( !s_jvmLibrary )
char * err = dlerror();
string error = (err == NULL) ? "could not open Java VM shared library" : err;
std::cerr << error << std::endl;
exit(1);
     return s_jvmLibrary;
JavaVM *
CreateJavaVM()
     JNIEnv *env = NULL;
     JavaVM *jvm = NULL;
     std::list<std::string> vmOptions;
     void *libraryHandle = GetJavaVMLibrary();
     jniCreateJavaVM_t createVMFunction = (jniCreateJavaVM_t)dlsym(libraryHandle, "JNI_CreateJavaVM");
     if( !createVMFunction )
          std::cerr << "could not find Java VM library function " << std::endl;
exit(1);
//Set the Java Max Heap Option
int noOfOptions = 1;
     s_vmOptions = (JavaVMOption *)malloc(noOfOptions * sizeof(JavaVMOption));
     s_vmOptions[0].optionString = strdup(maxHeapSize.c_str());
     s_vmArgs.version = JNI_VERSION_1_6;
     s_vmArgs.options = s_vmOptions;
     s_vmArgs.nOptions = noOfOptions;
     s_vmArgs.ignoreUnrecognized = JNI_TRUE;
     // Create the Java VM
     int ret = createVMFunction(&jvm, (void**)&env, &s_vmArgs);
     if( ret != 0 )
std::cerr << "Could not create jvm" << endl;
exit(1);
     return jvm;
int
main(int argc, char **argv)
int createJvm = USE_JAVA_VM;
long mSize = ALLOC_SIZE;
long maxSize = MAX_MEMORY;
if(argc > 1){
maxSize = (atol(argv[1]) * 1024);
cout << "maxSize is " << maxSize << endl;
if(argc > 2){
maxHeapSize = string("-Xmx").append(argv[2]);
if(argc > 3){
createJvm = atoi(argv[3]);
     if (createJvm)
          JavaVM *vm = CreateJavaVM();
          if (vm != NULL)
               printf("Sucessfully created Java VM\n");
          else
               printf("Failed to create Java VM\n");
               return 1;
     long memUsed = 0;
     long count = 0;
     printf("beginning mallocs\n");
     std::list<void *> memory;
     while (memUsed < maxSize)
          void ptr = malloc(mSize1024);
          memory.push_back(ptr);
          if (ptr == NULL)
               printf("malloc failed, count=%ld, size=%ld k\n", count, memUsed);
               return 1;
          memset(ptr, 0, mSize*1024);
          memUsed += mSize;
          count++;
          if (!(count % REPORTING_INTERVAL))
          printf("malloc count=%ld, size=%ld m\n", count, memUsed/1024);
     printf("finished mallocs\n");
     return 0;
}

Satellite Pro C850 - WLAN keeps failing after Win 7 installation

Hi,
I own a C850-1GR (PSCBXE), which comes with Win8.
I've bought Win 7 32-bit Home Premium and reinstalled it from scratch.
Afterwards I've installed the drivers from toshiba support page in the following order:
Intel Chipset SW Installation Utility
Intel Management Engine Interface
Display Driver
Intel Rapid Storage Technology Driver
Realtek Audio Driver
ATI HDMI Audio Driver
SRS Premium Sound HD
Synaptics Touch Pad Driver
Realtek LAN Driver
Realtek Wireless LAN Driver
Intel Wireless Display
Realtek Bluetooth Filter Driver Package
Bluetooth Monitor
Intel USB3.0 Driver
Realtek Card Reader
TOSHIBA Value Added Package
TOSHIBA Sleep Utility
TOSHIBA Resolution+ Plug-in for Windows Media Player
TOSHIBA Media Controller
TOSHIBA Media Controller Plug-in
TOSHIBA Network Device ID Registry Setting Tool
TOSHIBA Web Camera Application
PatchFiles PCIIDEREG-1.2
PatchFiles
When the installation is done, WLAN fails after reboot, alternately.
This means:
*First boot: WLAN OK*
*Second boot: WLAN fails*
*Third boot ( = first boot): WLAN OK*
*Fourth boot ( = second boot): WLAN Fails*
*and so on.*
Failing means, the WLAN symbol is displayed for a few seconds, then the "no network" icon is displayed.
Any help is greatly appreciated.

>(Why on earth should a device report an error every second system boot?)
Yes, indeed this is very confusing and strange.
Just one notice regarding:
>Please note, that the intel driver is for "wireless display".
Intel wireless display works only in connection with Intel WLan card. If your notebook does not contain Wlan card from Intel manufacturers, the wireless display does not work
>Furthermore, all these drivers are listed on the C850 driver page for Win7-32.
Yes, this is true but all these drivers appear because of different C850 with different hardware configuration.

Http get requests fail after a few weeks

All,
I have a get request to a servlet that works for a few weeks, then it will suddenly stop.
I change the code once, works,then it will fail after a few weeks.
I change the code again, works, then it will fail after a few weeks.
Servlet works like: send one request, wait, then send a second.
Here are the last 2 code iterations:
try {
        // Construct data
        String data = URLEncoder.encode("key1", "UTF-8") + "=" + URLEncoder.encode("value1", "UTF-8");
        data += "&" + URLEncoder.encode("key2", "UTF-8") + "=" + URLEncoder.encode("value2", "UTF-8");
          //String data = "";
        // Send data
        //URL url = new URL("http://localhost:8080/stocks?action=1&date=20080310");
        URL url = new URL("http://localhost:8080/stocks/monitor?action=1&date="+stringDate);
        URLConnection conn = url.openConnection();
        conn.setDoOutput(true);
        OutputStreamWriter wr = new OutputStreamWriter(conn.getOutputStream());
        wr.write(data);
        wr.flush();
        // Get the response
        BufferedReader rd = new BufferedReader(new InputStreamReader(conn.getInputStream()));
        //System.out.println(rd.read());
        String line;
        int count =0;
        while ((line = rd.readLine()) != null) {
            // Process line...
             System.out.println(count + line);
             count++;
        wr.close();
        rd.close();
    } catch (Exception e) {
    try {
        // Construct data
        String data = URLEncoder.encode("key1", "UTF-8") + "=" + URLEncoder.encode("value1", "UTF-8");
        data += "&" + URLEncoder.encode("key2", "UTF-8") + "=" + URLEncoder.encode("value2", "UTF-8");
         //String data = "";
        // Send data
        URL url = new URL("http://localhost:8080/stocks/monitor?action=2");
        URLConnection conn = url.openConnection();
        conn.setDoOutput(true);
        OutputStreamWriter wr = new OutputStreamWriter(conn.getOutputStream());
        wr.write(data);
        wr.flush();
        // Get the response
        BufferedReader rd = new BufferedReader(new InputStreamReader(conn.getInputStream()));
        String line;
        int count =0;
        while ((line = rd.readLine()) != null) {
            // Process line...
             System.out.println(count + line);
             count++;
        wr.close();
        rd.close();
    } catch (Exception e) {
    }I send this request twice with different params
public static String sendGetRequest(String endpoint, String requestParameters)
String result = null;
if (endpoint.startsWith("http://"))
// Send a GET request to the servlet
try
// Construct data
StringBuffer data = new StringBuffer();
// Send data
String urlStr = endpoint;
if (requestParameters != null && requestParameters.length () > 0)
urlStr += "?" + requestParameters;
URL url = new URL(urlStr);
URLConnection conn = url.openConnection ();
// Get the response
BufferedReader rd = new BufferedReader(new InputStreamReader(conn.getInputStream()));
StringBuffer sb = new StringBuffer();
String line;
while ((line = rd.readLine()) != null)
sb.append(line);
rd.close();
result = sb.toString();
} catch (Exception e)
e.printStackTrace();
return result;
}Any ideas?
Edited by: iketurna on Mar 13, 2008 7:21 AM

You appear to have empty catch blocks. Which means you don't get the error message that would tell you what is failing.
Put in code that logs the exception and the stack trace of the exception. If you can't figure out the error message, post it here.
You should be closing streams in finally statements. Otherwise they might not get closed when there is an error -> you leak descriptors -> you run out of descriptors -> every stream open will fail -> more errors -> more descriptors get leaked -> etc -> everything stops working. Always do it like this:
    WhateverStream out = null;
    try {
        out = ...;
        ...use out...;
    } finally {
        try {
            if (out != null) out.close();
       } catch (IOException e) { ...log it... }
    }

Gatherer\CSS connector failed to connect to CSS net.tcp

Hi,
Hope someone can help me out here. Have SharePoint 2013 running fine and has been for a while. Recently have been getting Event ID 1400 SharePoint server search 'Gatherer\CSS connector failed to connect to CSS net.tcp //servername/C7A30B. If I restart the
server then all runs fine again but within a day it starts coming up with the same warning. The event ID is followed by Event id 2580 and 2581. Any help would be most appreciated.

Hi alfatec,
It should be related to the search service account permission issue, please try the following steps on your search servers which are running the "Search Host Controller Service", then check results again.
1. "Start" -> "Administrative Tools" -> "Local Security Policy" (or run: Secpol.msc).
2. Expand "Local Policies".
3. Click on "User rights assignment".
4. Make sure that the search service account has the following privileges.
"Replace a process level token"
"Adjust memory quotas for a process"
"Impersonate a client after authentication"
"Log on as a service"
(5) Run gpupdate /force
Thanks
Daniel Yang
TechNet Community Support

How can I connect my Early 2011" Macbook Pro 13" inch, with a generic Mini Display Port to HDMI connector, to a LG 32LD340 LCD TV, using Mountain Lion 10.8.2?

I have an Early 2011" macbook pro 13 inch (core i5 2.3ghz 4gb ram 320hdd) with Mountain Lion 10.8.2, and I want to connect it via Mini DP to HDMI connector, and a HDMI cable to a LCD TV LG 32LD340. When I had Lion OS, I had no problems at all.

If you have an external drive equal to or larger than your internal HD, clone your internal to it with either Carbon Copy Cloner or Super Duper. Test the clone to make sure it's bootable. Then upgrade either one. Try it out first.

Unit test fails after upgrading to Kodo 4.0.0 from 4.0.0-EA4

I have a group of 6 unit tests failing after upgrading to the new Kodo
4.0.0 (with BEA) from Kodo-4.0.0-EA4 (with Solarmetric). I'm getting
exceptions like the one at the bottom of this email. It seems to be an
interaction with the PostgreSQL driver, though I can't be sure. I
haven't changed my JDO configuration or the related classes in months
since I've been focusing on using the objects that have already been
defined. The .jdo, .jdoquery, and .java code are below the exception,
just in case there's something wrong in there. Does anyone have advice
as to how I might debug this?
Thanks,
Mark
Testsuite: edu.ucsc.whisper.test.integration.UserManagerQueryIntegrationTest
Tests run: 15, Failures: 0, Errors: 6, Time elapsed: 23.308 sec
Testcase:
testGetAllUsersWithFirstName(edu.ucsc.whisper.test.integration.UserManagerQueryIntegrationTest):
Caused an ERROR
The column index is out of range: 2, number of columns: 1.
<2|false|4.0.0> kodo.jdo.DataStoreException: The column index is out of
range: 2, number of columns: 1.
at
kodo.jdbc.sql.DBDictionary.newStoreException(DBDictionary.java:4092)
at kodo.jdbc.sql.SQLExceptions.getStore(SQLExceptions.java:82)
at kodo.jdbc.sql.SQLExceptions.getStore(SQLExceptions.java:66)
at kodo.jdbc.sql.SQLExceptions.getStore(SQLExceptions.java:46)
at
kodo.jdbc.kernel.SelectResultObjectProvider.handleCheckedException(SelectResultObjectProvider.java:176)
at
kodo.kernel.QueryImpl$PackingResultObjectProvider.handleCheckedException(QueryImpl.java:2460)
at
com.solarmetric.rop.EagerResultList.<init>(EagerResultList.java:32)
at kodo.kernel.QueryImpl.toResult(QueryImpl.java:1445)
at kodo.kernel.QueryImpl.execute(QueryImpl.java:1136)
at kodo.kernel.QueryImpl.execute(QueryImpl.java:901)
at kodo.kernel.QueryImpl.execute(QueryImpl.java:865)
at kodo.kernel.DelegatingQuery.execute(DelegatingQuery.java:787)
at kodo.jdo.QueryImpl.executeWithArray(QueryImpl.java:210)
at kodo.jdo.QueryImpl.execute(QueryImpl.java:137)
at
edu.ucsc.whisper.core.dao.JdoUserDao.findAllUsersWithFirstName(JdoUserDao.java:232)
at
edu.ucsc.whisper.core.manager.DefaultUserManager.getAllUsersWithFirstName(DefaultUserManager.java:252)
NestedThrowablesStackTrace:
org.postgresql.util.PSQLException: The column index is out of range: 2,
number of columns: 1.
at
org.postgresql.core.v3.SimpleParameterList.bind(SimpleParameterList.java:57)
at
org.postgresql.core.v3.SimpleParameterList.setLiteralParameter(SimpleParameterList.java:101)
at
org.postgresql.jdbc2.AbstractJdbc2Statement.bindLiteral(AbstractJdbc2Statement.java:2085)
at
org.postgresql.jdbc2.AbstractJdbc2Statement.setInt(AbstractJdbc2Statement.java:1133)
at
com.solarmetric.jdbc.DelegatingPreparedStatement.setInt(DelegatingPreparedStatement.java:390)
at
com.solarmetric.jdbc.PoolConnection$PoolPreparedStatement.setInt(PoolConnection.java:440)
at
com.solarmetric.jdbc.DelegatingPreparedStatement.setInt(DelegatingPreparedStatement.java:390)
at
com.solarmetric.jdbc.DelegatingPreparedStatement.setInt(DelegatingPreparedStatement.java:390)
at
com.solarmetric.jdbc.DelegatingPreparedStatement.setInt(DelegatingPreparedStatement.java:390)
at
com.solarmetric.jdbc.LoggingConnectionDecorator$LoggingConnection$LoggingPreparedStatement.setInt(LoggingConnectionDecorator.java:1
257)
at
com.solarmetric.jdbc.DelegatingPreparedStatement.setInt(DelegatingPreparedStatement.java:390)
at
com.solarmetric.jdbc.DelegatingPreparedStatement.setInt(DelegatingPreparedStatement.java:390)
at kodo.jdbc.sql.DBDictionary.setInt(DBDictionary.java:980)
at kodo.jdbc.sql.DBDictionary.setUnknown(DBDictionary.java:1299)
at kodo.jdbc.sql.SQLBuffer.setParameters(SQLBuffer.java:638)
at kodo.jdbc.sql.SQLBuffer.prepareStatement(SQLBuffer.java:539)
at kodo.jdbc.sql.SQLBuffer.prepareStatement(SQLBuffer.java:512)
at kodo.jdbc.sql.SelectImpl.execute(SelectImpl.java:332)
at kodo.jdbc.sql.SelectImpl.execute(SelectImpl.java:301)
at kodo.jdbc.sql.Union$UnionSelect.execute(Union.java:642)
at kodo.jdbc.sql.Union.execute(Union.java:326)
at kodo.jdbc.sql.Union.execute(Union.java:313)
at
kodo.jdbc.kernel.SelectResultObjectProvider.open(SelectResultObjectProvider.java:98)
at
kodo.kernel.QueryImpl$PackingResultObjectProvider.open(QueryImpl.java:2405)
at
com.solarmetric.rop.EagerResultList.<init>(EagerResultList.java:22)
at kodo.kernel.QueryImpl.toResult(QueryImpl.java:1445)
at kodo.kernel.QueryImpl.execute(QueryImpl.java:1136)
at kodo.kernel.QueryImpl.execute(QueryImpl.java:901)
at kodo.kernel.QueryImpl.execute(QueryImpl.java:865)
at kodo.kernel.DelegatingQuery.execute(DelegatingQuery.java:787)
at kodo.jdo.QueryImpl.executeWithArray(QueryImpl.java:210)
at kodo.jdo.QueryImpl.execute(QueryImpl.java:137)
at
edu.ucsc.whisper.core.dao.JdoUserDao.findAllUsersWithFirstName(JdoUserDao.java:232)
--- DefaultUser.java -------------------------------------------------
public class DefaultUser
implements User
/** The account username. */
private String username;
/** The account password. */
private String password;
/** A flag indicating whether or not the account is enabled. */
private boolean enabled;
/** The authorities granted to this account. */
private Set<Authority> authorities;
/** Information about the user, including their name and text that
describes them. */
private UserInfo userInfo;
/** The set of organizations where this user works. */
private Set<Organization> organizations;
--- DefaultUser.jdo --------------------------------------------------
<?xml version="1.0"?>
<!DOCTYPE jdo PUBLIC
"-//Sun Microsystems, Inc.//DTD Java Data Objects Metadata 2.0//EN"
"http://java.sun.com/dtd/jdo_2_0.dtd">
<jdo>
<package name="edu.ucsc.whisper.core">
<sequence name="user_id_seq"
factory-class="native(Sequence=user_id_seq)"/>
<class name="DefaultUser" detachable="true"
table="whisper_user" identity-type="datastore">
<datastore-identity sequence="user_id_seq" column="userId"/>
<field name="username">
<column name="username" length="80" jdbc-type="VARCHAR" />
</field>
<field name="password">
<column name="password" length="40" jdbc-type="CHAR" />
</field>
<field name="enabled">
<column name="enabled" />
</field>
<field name="userInfo" persistence-modifier="persistent"
default-fetch-group="true" dependent="true">
<extension vendor-name="jpox"
key="implementation-classes"
value="edu.ucsc.whisper.core.DefaultUserInfo" />
<extension vendor-name="kodo"
key="type"
value="edu.ucsc.whisper.core.DefaultUserInfo" />
</field>
<field name="authorities" persistence-modifier="persistent"
table="user_authorities"
default-fetch-group="true">
<collection
element-type="edu.ucsc.whisper.core.DefaultAuthority" />
<join column="userId" delete-action="cascade"/>
<element column="authorityId" delete-action="cascade"/>
</field>
<field name="organizations" persistence-modifier="persistent"
table="user_organizations" mapped-by="user"
default-fetch-group="true" dependent="true">
<collection
element-type="edu.ucsc.whisper.core.DefaultOrganization"
dependent-element="true"/>
<join column="userId"/>

</field>
</class>
</package>
</jdo>
--- DefaultUser.jdoquery ---------------------------------------------
<?xml version="1.0"?>
<!DOCTYPE jdo PUBLIC
"-//Sun Microsystems, Inc.//DTD Java Data Objects Metadata 2.0//EN"
"http://java.sun.com/dtd/jdo_2_0.dtd">
<jdo>
<package name="edu.ucsc.whisper.core">
<class name="DefaultUser">
<query name="UserByUsername"
language="javax.jdo.query.JDOQL"><![CDATA[
SELECT UNIQUE FROM edu.ucsc.whisper.core.DefaultUser
WHERE username==searchName
PARAMETERS java.lang.String searchName
]]></query>
<query name="DisabledUsers"
language="javax.jdo.query.JDOQL"><![CDATA[
SELECT FROM edu.ucsc.whisper.core.DefaultUser WHERE
enabled==false
]]></query>
<query name="EnabledUsers"
language="javax.jdo.query.JDOQL"><![CDATA[
SELECT FROM edu.ucsc.whisper.core.DefaultUser WHERE
enabled==true
]]></query>
<query name="CountUsers"
language="javax.jdo.query.JDOQL"><![CDATA[
SELECT count( this ) FROM edu.ucsc.whisper.core.DefaultUser
]]></query>
</class>
</package>
</jdo>

I'm sorry, I have no idea. I suggest sending a test case that
reproduces the problem to support.

My iphone no longer displays anything through the HDMI connector

I purchased a cheap 30-pin to HDMI connector (big mistake) but was able to see my iPhone screen on my TV. I then added a Lightening to 30-pin connector so I could display my girlfriend's iPhone 5C screen on the TV. But I had problem taking these two connectors apart and the end of one of them started to come apart. Pushed it back in. When I then tried to display her 5C screen, nothing worked. Then I went back to my iPhone 4 and it also no longer worked. I thought the cable was bad so I then purchased a genuine Apple 30-pin to HDMI connector and Apple Lightening to 30-pin connector. But I still don't see anything on the TV for either of the iPhones BUT my iPad 2 does display data on the TV. Conclusion: Did I short out something in both iPhone internal connectors? Has anyone ever see this kind of problem? BTW, both phones can still be charged without any problem.
Thanks for the help.

I'd start by calling VZW support. They are really good in a situations like this. I work with them a lot in the Enterprise space. Sounds like your network/roaming settings are messed up.

Since I upgraded my iPod Touch 4G, the HDMI connector to my TV (that I bought from Apple) is no longer supported. Can this be corrected in a short period? Thanks

As stated in the title, since I installed iOS6 on my iPod Touch 4G, the HDMI connector that I bought from Apple is no longer supported/recognized...
A bit of a problem, when you buy an accessory to be able to watch videos on any HDMI enabled TV....
Too bad that nobody checked on it before releasing the OS...
Is there a solution to be released soon (like very soon)????

Sometime the following works.
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.

HDMI connector failed after a shot of static electricity

Similar Messages

Maybe you are looking for