HDMI display issues

Trying to connect my HP 15-r101na laptop to a Panasonic 32in TV via HDMI. The problem I am having is that when the display mode is set to Duplicate, the laptop screen displays normally while the image occupies only the middle of the TV screen. When Second Screen Only is selected, the opposite happens - the image extends beyond the edges of the TV screen. I've tried changing the resolution, but whatever resolution I select, the result is that the image either occupies only the middle of the TV screen or extends beyond the edges. Any suggestions?

Also tried two other TV's (22in Toshiba and 26in Samsung) with similar results.

Similar Messages

Is garage band included on 10.6 OS and hdmi display issues?

Imac, 17 inch display, 2.0 GHz, 1GB ram two issues. Can I connect an hdmi second display (hidef tv) through the thunderbolt port and does garage band come with OS 10.6. Can't find garage band anyplace and the second display when plugged in to an aftermarket thunderbolt to hdmi adapter sees the hdmi display but won't mirror. I have a clean install of 10.6 and can't get past these two issues. Any help please.

Here's the issue. I can only get 3 meg d/l speed and that drops to as low as .5 meg at times. I can link my MacBook Pro to an hdmi hi def 1080 thru a Devi connector and all works fine. I run Netflix and the MacBook buffers the content so if the speed lags the show doesn't stop. I came across this iMac and was hoping to do the same thing. I bought an Apple TV 2 nd gen and it just stops and stalls due to no buffering. So that's not working. If I can connect the iMac to the larger Vizio with hdmi inputs, 1080 hi def I would allow the iMac to run my Netflix and not ruin here MacBook by letting it run continuously. I used the MacBook on a smaller 14" and the 26" Vizio with no problems. The iMac won't see either one though in sys prefs it does show the display but won't mirror. If you, for some reason, just cannot answer the question, just let me know, I appreciate all your help. I am at a loss but feel certain there is a way to do this.

HDMI display issues after 10.8.2

Hi,
I just updated my Macbook Pro Retina to OSX 10.8.2. I often use my hdtv as an external display, that is, until after updating. Now whenever I connect my mbp to the tv via hdmi, the screen goes black and nothing but a cursor appears. The cable is fine, tried multiple cables, multple comps, none of the system preferences have been changed. Literally happened just after restarting with the update. Help?

Progress report:
Apple called me today, had me remove my third party SwitchResX multiple monitor program and preference pane, and also an com.apple.windows.xxx plist in th system preferences, followed by a reboot with a NVPRAM reset.
Neither of these solved the problem or changed it in any way.
They then had me redo the capture pocess while the HDMI cable was plugged in, send another 10 megs worth of data to them, and they have sent the new data back to engineering.
By the way, mjeick, besides the 10.8.2 upgrade did you also do the firmware upgrade? My suspicion is that the firmware is the source of the problem, and that Apple will have to do a new firmware update. If you didn't do the firmware update and still have the problem, I should let Apple know that.
Apple seems very interested and concerned about this. My rep, who is a high level guy, said he hadn't seen the engineering people get back to him this fast (less than one day) in a while.

Display Issues with mini (Mid 2010) and LG L246WP

I recently purchased a new mini (Mid 2010 base model) and planned to use it with my 24" LG L246WP monitor, which is about 3 years old. The monitor has VGA, component, and HDMI inputs.
I used an HDMI-to-HDMI cable to connect the mini directly to the monitor, and the output is completely messed up. The mini recognized the monitor (titling the System Preferences > Display dialog with 'L246WP') and set it to the monitor's native resolution of 1920x1200, but on the monitor the image is cropped to what looks like a 4:3 aspect ratio and with part of the image shifted up and left so I cannot view the top menu bar or the left hand side of the desktop. The monitor's on-screen display shows 1080p in this mode.
The Display dialog also gives me an option for 1080p. I can select this and use the Underscan slider to resize the desktop output to fit on the screen, but it is still shifted left and must be resized smaller than the available display space (plus the total image is only 1080 pixels, not using the monitor's full native screen). In this mode, 1080p also shows on the monitor's on-screen display.
I tried 1024x768 to see if I could get a properly-positioned image, but the desktop was shifted just like in the 1920x1200 case and the monitor's on-screen display status still reported 1080p.
The monitor has a menu setting under an HDMI heading with "Video" and "PC" options, but changing this selection does not make a difference.
Since the monitor came out before HDMI was as widespread as it is today, it came with a DVI-to-HDMI cable, so I also tried using that cable with the HDMI-to-DVI adapter that came with the mini, but this did not make a difference either.
To prove it wasn't the HDMI cable, I connected the mini to my Samsung 6300 series 40" LED HDTV and with some tweaking of the Underscan slider the displayed image filled the screen perfectly.
I've searched the Internet and various forum threads (i.e. http://hardforum.com/showthread.php?t=1167222&page=63) seem to indicate this monitor can send a corrupted EDID that causes issues, especially with nVidia graphics drivers. On Windows you can use registry or driver hacks to override the EDID with the correct values, but on OS X this doesn't seem possible (I was hoping for a Terminal one-liner but it seems this doesn't exist). I have seen some mentions of the shareware SwitchResX (http://www.madrau.com), which looks like it gives you the option to override resolution settings, but I haven't tried this yet.
It also appears to me that the monitor is always interpreting the signal (or the mini is always sending the signal) as 1080p, even if I've set 1920x1200 in the Display dialog. I don't know if this is a defect in the monitor where it always assumes the HDMI input is a 1080p source (previous I used it with an Xbox 360 with no issues but that was 1080p HDMI), or if is a bug in the graphics drivers (or at least a lack of flexibility / miscommunication to the user trying to handle a corrupt EDID).
I asked my local Genius Bar for advice today (without bringing any hardware in) but was not told anything I didn't already know.
I'm trying to determine the best way to work through this issue. *My questions are:*
Would it make any difference if I used a Mini DisplayPort-to-DVI adapter (and then my DVI-to-HDMI cable to the monitor's HDMI input)?
What about a Mini DisplayPort-to-VGA adapter? In the past I used a 12" Powerbook (via a mini-DVI-to-VGA adapter) with this monitor and had no display issues like this, but I'd prefer to stick with a digital connection on my brand new mini.
Is SwitchResX the only practical way in OS X to override a corrupt EDID and force the mini to output a certain resolution?
Besides the various adapters and SwitchResX, is there anything else I should try before buying a new monitor?

Hello EPWilson4984.
I have been experiencing the same issues you described. Connecting my brand new Mac Mini to my Westinghouse 24”monitor (L2410NM, 1920x1200 pixel resolution) produces a very fuzzy and washed out image quality. The Mac recognizes the monitor and applies the right resolution (1920x1200), but it looks just awful. The EDID info is definitely not right.
Now, I tried your suggestion (DVI-to-HDMI), and similar suggestions from other threads, but nothing works. Nothing seems to work at all.
The main input for the monitor is HDMI, so whatever cable I use, in the end always has to connect to the monitor via HDMI. I tried all these combinations with zero success:
Mac mini -> HDMI cable -> monitor (result: fuzzy and blurry image)
Mac mini -> displayport –HDMI adapter-> HDMI cable -> monitor (result: fuzzy and blurry image)
Mac mini -> displayport –DVI adapter-> DVI-to-HDMI cable -> monitor (result: it gives me a blank screen, no image at all)
I’m running out of options. Don’t know what to do. The 24” monitor produces beautiful, crisp images when hooked to my Windows 7 PC. It looks horrible when connected to my brand new Mac Mini.
Any alternatives you may have come across? Please let me know, thank you.

Display Issue after 10.9.2 update

After updating my Macbook Pro with Retina to 10.9.2 -- My display flickers for a second after sleep and or blank screen and then goes back to normal. Has anyone else been having display issues after updating?

Yes similar problem here: I have a MacBook Pro, 15 inch Retina, Mid 2012, and when I connect a secondary display via HDMI (and also HDMI-to-Thunderbolt) then the external monitor becomes the main display.
I have not figured out on how to switch back to former settings. My guess: it's a bug. A quick search confirms that many others have secondary display issues since 10.9.2
(Steve would have fired those lazy punks, who failed to do sincere testing before release …)

HDMI display no longer detected

Soon after updating to OS X Mavericks my Dell HDMI display stopped working (the screen went into power saving mode) and isn't detected by my Late 2012 Mac Mini. Have tried reboots and disconnecting the power and HDMI cables to no effect. I can remote desktop into the Mac MIni from a PC so can still access it to try different options.
Any suggestions?

Yeah, the issue still continues for me. I thought that I had it resolved by doing a NVRAM reset, but the dreaded issue came back. I initially noticed the issue would occur much faster if I was using VirtualBox, but after updating VirtualBox the issue isn't as prevalent. I'm also able to make the issue occur much quicker if I'm running a Flash based game in the browser. When the issue has occurs and I get back into the machine remotely and open the console I can see that the Window Server has gone sideways. Related output follows:
12/18/2013 7:16:10.410 PM WindowServer[174]: Received display connect changed for display 0x3f003c
12/18/2013 7:16:10.410 PM WindowServer[174]: Found 1 modes for display 0x003f003c [1, 0]
12/18/2013 7:16:10.410 PM WindowServer[174]: Received display connect changed for display 0x3f003d
12/18/2013 7:16:10.410 PM WindowServer[174]: Found 1 modes for display 0x003f003d [1, 0]
12/18/2013 7:16:10.410 PM WindowServer[174]: Received display connect changed for display 0x2b344c12
12/18/2013 7:16:10.410 PM WindowServer[174]: Found 1 modes for display 0x2b344c12 [1, 0]
12/18/2013 7:16:10.411 PM WindowServer[174]: Display 0x2b344c12 changed state to offline
12/18/2013 7:16:10.413 PM WindowServer[174]: No display devices are on-line. Switching to virtual display mode
12/18/2013 7:16:10.441 PM WindowServer[174]: Display 0x41dc9d02: GL mask 0x4; bounds (0, 0)[2048 x 1152], 25 modes available
Main, Active, on-line, enabled, built-in, Vendor 756e6b6e, Model 76697274, S/N 0, Unit 2, Rotation 0
UUID 0x31bd715b0bc1c0181781829c86b47a3c, ColorProfile { 2, "HD 709-A"}
12/18/2013 7:16:10.442 PM WindowServer[174]: Display 0x41dc9d03: GL mask 0x8; bounds (3072, 0)[1 x 1], 2 modes available
off-line, enabled, built-in, Vendor 756e6b6e, Model 76697274, S/N 0, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
12/18/2013 7:16:10.442 PM WindowServer[174]: Display 0x41dc9d00: GL mask 0x1; bounds (3073, 0)[1 x 1], 2 modes available
off-line, enabled, built-in, Vendor 756e6b6e, Model 76697274, S/N 0, Unit 0, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
12/18/2013 7:16:10.442 PM WindowServer[174]: Display 0x41dc9d01: GL mask 0x2; bounds (3074, 0)[1 x 1], 2 modes available
off-line, enabled, built-in, Vendor 756e6b6e, Model 76697274, S/N 0, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
12/18/2013 7:16:10.452 PM WindowServer[174]: Display added
12/18/2013 7:16:10.452 PM WindowServer[174]: Display removed
12/18/2013 7:16:10.454 PM WindowServer[174]: Display 0x41dc9d02: GL mask 0x4; bounds (0, 0)[2048 x 1152], 25 modes available
Main, Active, on-line, enabled, built-in, Vendor 756e6b6e, Model 76697274, S/N 0, Unit 2, Rotation 0
UUID 0x31bd715b0bc1c0181781829c86b47a3c, ColorProfile { 2, "HD 709-A"}
12/18/2013 7:16:10.454 PM WindowServer[174]: Display 0x41dc9d03: GL mask 0x8; bounds (3072, 0)[1 x 1], 2 modes available
off-line, enabled, built-in, Vendor 756e6b6e, Model 76697274, S/N 0, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
12/18/2013 7:16:10.454 PM WindowServer[174]: Display 0x41dc9d00: GL mask 0x1; bounds (3073, 0)[1 x 1], 2 modes available
off-line, enabled, built-in, Vendor 756e6b6e, Model 76697274, S/N 0, Unit 0, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
12/18/2013 7:16:10.454 PM WindowServer[174]: Display 0x41dc9d01: GL mask 0x2; bounds (3074, 0)[1 x 1], 2 modes available
off-line, enabled, built-in, Vendor 756e6b6e, Model 76697274, S/N 0, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
12/18/2013 7:16:12.453 PM WindowServer[174]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
12/18/2013 7:16:12.569 PM WindowServer[174]: Display 0x41dc9d02: Unit 2; ColorProfile { 2, "HD 709-A"}; TransferFormula (1.000000, 1.000000, 1.000000)
12/18/2013 7:16:12.584 PM WindowServer[174]: Display 0x41dc9d02: Unit 2; ColorProfile { 2, "HD 709-A"}; TransferFormula (1.000000, 1.000000, 1.000000)
12/18/2013 7:18:58.699 PM WindowServer[174]: disable_update_timeout: UI updates were forcibly disabled by application "Console" for over 1.00 seconds. Server has re-enabled them.
12/18/2013 7:18:58.856 PM WindowServer[174]: common_reenable_update: UI updates were finally reenabled by application "Console" after 1.16 seconds (server forcibly re-enabled them after 1.00 seconds)
12/18/2013 7:20:58.005 PM WindowServer[174]: CGXGetConnectionProperty: Invalid connection 53251
12/18/2013 7:20:58.005 PM WindowServer[174]: CGXGetConnectionProperty: Invalid connection 53251
12/18/2013 7:20:58.006 PM WindowServer[174]: CGXGetConnectionProperty: Invalid connection 53251
12/18/2013 7:20:58.006 PM WindowServer[174]: CGXGetConnectionProperty: Invalid connection 53251
12/18/2013 7:20:58.006 PM WindowServer[174]: CGXOrderWindowList: Invalid window 321 (index 0/1)
12/18/2013 7:20:58.006 PM WindowServer[174]: CGXGetConnectionProperty: Invalid connection 53251
12/18/2013 7:20:58.062 PM WindowServer[174]: CGXSetWindowListSystemAlpha: Invalid window 321 (index 0/1)
12/18/2013 7:22:16.960 PM WindowServer[205]: Server is starting up
12/18/2013 7:22:17.028 PM WindowServer[205]: Session 256 retained (2 references)
12/18/2013 7:22:17.028 PM WindowServer[205]: Session 256 released (1 references)
12/18/2013 7:22:17.059 PM WindowServer[205]: Session 256 retained (2 references)
12/18/2013 7:22:17.062 PM WindowServer[205]: init_page_flip: page flip mode is on
12/18/2013 7:22:17.186 PM WindowServer[205]: Found 1 modes for display 0x00000000 [1, 0]
12/18/2013 7:22:17.455 PM WindowServer[205]: Found 1 modes for display 0x00000000 [1, 0]
12/18/2013 7:22:17.457 PM WindowServer[205]: Found 1 modes for display 0x00000000 [1, 0]
12/18/2013 7:22:17.461 PM WindowServer[205]: mux_initialize: Couldn't find any matches
12/18/2013 7:22:17.461 PM WindowServer[205]: Found 1 modes for display 0x00000000 [1, 0]
12/18/2013 7:22:17.461 PM WindowServer[205]: Found 1 modes for display 0x00000000 [1, 0]
12/18/2013 7:22:17.462 PM WindowServer[205]: Found 1 modes for display 0x00000000 [1, 0]
12/18/2013 7:22:17.468 PM WindowServer[205]: WSMachineUsesNewStyleMirroring: true
12/18/2013 7:22:17.469 PM WindowServer[205]: Display 0x41dc9d03: GL mask 0x8; bounds (0, 0)[1280 x 1024], 25 modes available
Main, Active, on-line, enabled, built-in, Vendor 756e6b6e, Model 76697274, S/N 0, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
12/18/2013 7:22:17.469 PM WindowServer[205]: Display 0x41dc9d00: GL mask 0x1; bounds (0, 0)[1280 x 1024], 2 modes available
off-line, enabled, built-in, Vendor 756e6b6e, Model 76697274, S/N 0, Unit 0, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
12/18/2013 7:22:17.469 PM WindowServer[205]: Display 0x41dc9d01: GL mask 0x2; bounds (0, 0)[1280 x 1024], 2 modes available
off-line, enabled, built-in, Vendor 756e6b6e, Model 76697274, S/N 0, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
12/18/2013 7:22:17.469 PM WindowServer[205]: Display 0x41dc9d02: GL mask 0x4; bounds (0, 0)[1280 x 1024], 2 modes available
off-line, enabled, built-in, Vendor 756e6b6e, Model 76697274, S/N 0, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
12/18/2013 7:22:17.470 PM WindowServer[205]: Display 0x41dc9d03: GL mask 0x8; bounds (0, 0)[1280 x 1024], 25 modes available
Main, Active, on-line, enabled, built-in, Vendor 756e6b6e, Model 76697274, S/N 0, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
12/18/2013 7:22:17.470 PM WindowServer[205]: Display 0x41dc9d00: GL mask 0x1; bounds (2304, 0)[1 x 1], 2 modes available
off-line, enabled, built-in, Vendor 756e6b6e, Model 76697274, S/N 0, Unit 0, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
12/18/2013 7:22:17.470 PM WindowServer[205]: Display 0x41dc9d01: GL mask 0x2; bounds (2305, 0)[1 x 1], 2 modes available
off-line, enabled, built-in, Vendor 756e6b6e, Model 76697274, S/N 0, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
12/18/2013 7:22:17.470 PM WindowServer[205]: Display 0x41dc9d02: GL mask 0x4; bounds (2306, 0)[1 x 1], 2 modes available
off-line, enabled, built-in, Vendor 756e6b6e, Model 76697274, S/N 0, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
12/18/2013 7:22:17.470 PM WindowServer[205]: CGXPerformInitialDisplayConfiguration
12/18/2013 7:22:17.470 PM WindowServer[205]:   Display 0x41dc9d03: Unit 3; Vendor 0x756e6b6e Model 0x76697274 S/N 0 Dimensions 0.00 x 0.00; online enabled built-in, Bounds (0,0)[1280 x 1024], Rotation 0, Resolution 1
12/18/2013 7:22:17.471 PM WindowServer[205]:   Display 0x41dc9d00: Unit 0; Vendor 0x756e6b6e Model 0x76697274 S/N 0 Dimensions 0.00 x 0.00; offline enabled built-in, Bounds (2304,0)[1 x 1], Rotation 0, Resolution 1
12/18/2013 7:22:17.471 PM WindowServer[205]:   Display 0x41dc9d01: Unit 1; Vendor 0x756e6b6e Model 0x76697274 S/N 0 Dimensions 0.00 x 0.00; offline enabled built-in, Bounds (2305,0)[1 x 1], Rotation 0, Resolution 1
12/18/2013 7:22:17.471 PM WindowServer[205]:   Display 0x41dc9d02: Unit 2; Vendor 0x756e6b6e Model 0x76697274 S/N 0 Dimensions 0.00 x 0.00; offline enabled built-in, Bounds (2306,0)[1 x 1], Rotation 0, Resolution 1
12/18/2013 7:22:17.660 PM WindowServer[205]: GLCompositor: GL renderer id 0x01024400, GL mask 0x0000000f, accelerator 0x00003533, unit 0, caps QEX|MIPMAP, vram 1024 MB
12/18/2013 7:22:17.660 PM WindowServer[205]: GLCompositor: GL renderer id 0x01024400, GL mask 0x0000000f, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
12/18/2013 7:22:17.660 PM WindowServer[205]: GLCompositor enabled for tile size [256 x 256]
12/18/2013 7:22:17.660 PM WindowServer[205]: CGXGLInitMipMap: mip map mode is on
12/18/2013 7:22:19.471 PM WindowServer[205]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
12/18/2013 7:22:21.238 PM WindowServer[205]: Display 0x41dc9d03: Unit 3; ColorProfile { 2, "Display"}; TransferFormula (1.000000, 1.000000, 1.000000)
12/18/2013 7:22:21.249 PM WindowServer[205]: Display 0x41dc9d03: Unit 3; ColorProfile { 2, "Display"}; TransferFormula (1.000000, 1.000000, 1.000000)
12/18/2013 7:22:21.264 PM WindowServer[205]: Display 0x41dc9d03: Unit 3; ColorProfile { 2, "Display"}; TransferFormula (1.000000, 1.000000, 1.000000)
12/18/2013 7:22:22.453 PM WindowServer[205]: [checkin] Another euid=0 process is checking in, which matches the existing session id 0x186a4, but it isn't loginwindow. pid=257 name=ARDAgent
12/18/2013 7:23:08.070 PM WindowServer[205]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
12/18/2013 7:23:08.412 PM WindowServer[205]: Display 0x41dc9d03: Unit 3; ColorProfile { 2, "Display"}; TransferFormula (1.000000, 1.000000, 1.000000)
12/18/2013 7:23:11.374 PM WindowServer[205]: disable_update_timeout: UI updates were forcibly disabled by application "SystemUIServer" for over 1.00 seconds. Server has re-enabled them.
12/18/2013 7:23:11.493 PM WindowServer[205]: common_reenable_update: UI updates were finally reenabled by application "SystemUIServer" after 1.12 seconds (server forcibly re-enabled them after 1.00 seconds)
12/18/2013 7:23:37.869 PM WindowServer[205]: disable_update_timeout: UI updates were forcibly disabled by application "SystemUIServer" for over 1.00 seconds. Server has re-enabled them.
12/18/2013 7:23:38.130 PM WindowServer[205]: common_reenable_update: UI updates were finally reenabled by application "SystemUIServer" after 1.26 seconds (server forcibly re-enabled them after 1.00 seconds)
12/18/2013 7:24:59.189 PM WindowServer[205]: disable_update_timeout: UI updates were forcibly disabled by application "Activity Monitor" for over 1.00 seconds. Server has re-enabled them.
12/18/2013 7:24:59.191 PM WindowServer[205]: common_reenable_update: UI updates were finally reenabled by application "Activity Monitor" after 1.00 seconds (server forcibly re-enabled them after 1.00 seconds)
12/18/2013 7:26:24.742 PM WindowServer[205]: CGXGetConnectionProperty: Invalid connection 46347
12/18/2013 7:26:24.742 PM WindowServer[205]: CGXGetConnectionProperty: Invalid connection 46347
12/18/2013 7:26:24.743 PM WindowServer[205]: CGXGetConnectionProperty: Invalid connection 46347
12/18/2013 7:26:24.743 PM WindowServer[205]: CGXGetConnectionProperty: Invalid connection 46347
12/18/2013 7:26:24.743 PM WindowServer[205]: CGXGetConnectionProperty: Invalid connection 46347
At this point I just end up turning off the mini for the night and started it back up in the morning without issue.
Here's what the Window Server reports when things are working normally after a bootup:
12/19/2013 8:00:31.085 AM WindowServer[212]: Server is starting up
12/19/2013 8:00:41.340 AM WindowServer[212]: Session 256 retained (2 references)
12/19/2013 8:00:41.340 AM WindowServer[212]: Session 256 released (1 references)
12/19/2013 8:00:41.359 AM WindowServer[212]: Session 256 retained (2 references)
12/19/2013 8:00:41.361 AM WindowServer[212]: init_page_flip: page flip mode is on
12/19/2013 8:00:44.158 AM WindowServer[212]: Found 1 modes for display 0x00000000 [1, 0]
12/19/2013 8:00:44.161 AM WindowServer[212]: Found 1 modes for display 0x00000000 [1, 0]
12/19/2013 8:00:44.165 AM WindowServer[212]: Found 24 modes for display 0x00000000 [18, 6]
12/19/2013 8:00:44.169 AM WindowServer[212]: mux_initialize: Couldn't find any matches
12/19/2013 8:00:44.170 AM WindowServer[212]: Found 24 modes for display 0x00000000 [18, 6]
12/19/2013 8:00:44.234 AM WindowServer[212]: Found 1 modes for display 0x00000000 [1, 0]
12/19/2013 8:00:44.234 AM WindowServer[212]: Found 1 modes for display 0x00000000 [1, 0]
12/19/2013 8:00:44.268 AM WindowServer[212]: WSMachineUsesNewStyleMirroring: true
12/19/2013 8:00:44.268 AM WindowServer[212]: MPServiceForDisplayDevice: Invalid device alias (0)
12/19/2013 8:00:44.268 AM WindowServer[212]: Display 0x2b344c12: GL mask 0x4; bounds (0, 0)[2048 x 1152], 24 modes available
Main, Active, on-line, enabled, boot, Vendor 10ac, Model d01d, S/N 334d4b53, Unit 2, Rotation 0
UUID 0x31bd715b0bc1c0181781829c86b47a3c
12/19/2013 8:00:44.268 AM WindowServer[212]: Display 0x003f003f: GL mask 0x8; bounds (0, 0)[1920 x 1200], 2 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
12/19/2013 8:00:44.269 AM WindowServer[212]: Display 0x003f003c: GL mask 0x1; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 0, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
12/19/2013 8:00:44.269 AM WindowServer[212]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
12/19/2013 8:00:44.269 AM WindowServer[212]: WSSetWindowTransform: Singular matrix
12/19/2013 8:00:44.269 AM WindowServer[212]: WSSetWindowTransform: Singular matrix
12/19/2013 8:00:44.343 AM WindowServer[212]: Display 0x2b344c12: GL mask 0x4; bounds (0, 0)[2048 x 1152], 24 modes available
Main, Active, on-line, enabled, boot, Vendor 10ac, Model d01d, S/N 334d4b53, Unit 2, Rotation 0
UUID 0x31bd715b0bc1c0181781829c86b47a3c
12/19/2013 8:00:44.343 AM WindowServer[212]: Display 0x003f003f: GL mask 0x8; bounds (3072, 0)[1 x 1], 2 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
12/19/2013 8:00:44.343 AM WindowServer[212]: Display 0x003f003c: GL mask 0x1; bounds (3073, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 0, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
12/19/2013 8:00:44.343 AM WindowServer[212]: Display 0x003f003d: GL mask 0x2; bounds (3074, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
12/19/2013 8:00:44.344 AM WindowServer[212]: CGXPerformInitialDisplayConfiguration
12/19/2013 8:00:44.344 AM WindowServer[212]:   Display 0x2b344c12: Unit 2; Vendor 0x10ac Model 0xd01d S/N 860703571 Dimensions 20.08 x 11.42; online enabled, Bounds (0,0)[2048 x 1152], Rotation 0, Resolution 1
12/19/2013 8:00:44.344 AM WindowServer[212]:   Display 0x003f003f: Unit 3; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3072,0)[1 x 1], Rotation 0, Resolution 1
12/19/2013 8:00:44.344 AM WindowServer[212]:   Display 0x003f003c: Unit 0; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3073,0)[1 x 1], Rotation 0, Resolution 1
12/19/2013 8:00:44.344 AM WindowServer[212]:   Display 0x003f003d: Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3074,0)[1 x 1], Rotation 0, Resolution 1
12/19/2013 8:00:44.362 AM WindowServer[212]: GLCompositor: GL renderer id 0x01024400, GL mask 0x0000000f, accelerator 0x0000344b, unit 0, caps QEX|MIPMAP, vram 1024 MB
12/19/2013 8:00:44.363 AM WindowServer[212]: GLCompositor: GL renderer id 0x01024400, GL mask 0x0000000f, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
12/19/2013 8:00:44.363 AM WindowServer[212]: GLCompositor enabled for tile size [256 x 256]
12/19/2013 8:00:44.363 AM WindowServer[212]: CGXGLInitMipMap: mip map mode is on
12/19/2013 8:00:44.621 AM WindowServer[212]: Display 0x2b344c12: Unit 2; ColorProfile { 2, "HD 709-A"}; TransferFormula (1.000000, 1.000000, 1.000000)
12/19/2013 8:00:44.950 AM WindowServer[212]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x2b344c12 device: 0x7ff968712000 isBackBuffered: 1 numComp: 3 numDisp: 3
12/19/2013 8:00:44.950 AM WindowServer[212]: _CGXGLDisplayContextForDisplayDevice: acquired display context (0x7ff968712000) - enabling OpenGL
12/19/2013 8:00:46.336 AM WindowServer[212]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
12/19/2013 8:00:46.358 AM WindowServer[212]: Display 0x2b344c12: Unit 2; ColorProfile { 2, "HD 709-A"}; TransferFormula (1.000000, 1.000000, 1.000000)
12/19/2013 8:00:46.426 AM WindowServer[212]: Display 0x2b344c12: Unit 2; ColorProfile { 2, "HD 709-A"}; TransferFormula (1.000000, 1.000000, 1.000000)
12/19/2013 8:00:57.942 AM WindowServer[212]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
12/19/2013 8:00:58.086 AM WindowServer[212]: Display 0x2b344c12: Unit 2; ColorProfile { 2, "HD 709-A"}; TransferFormula (1.000000, 1.000000, 1.000000)
12/19/2013 8:01:07.581 AM WindowServer[212]: disable_update_timeout: UI updates were forcibly disabled by application "SystemUIServer" for over 1.00 seconds. Server has re-enabled them.
12/19/2013 8:01:08.632 AM WindowServer[212]: common_reenable_update: UI updates were finally reenabled by application "SystemUIServer" after 2.29 seconds (server forcibly re-enabled them after 1.23 seconds)
12/19/2013 8:02:49.404 AM WindowServer[212]: disable_update_timeout: UI updates were forcibly disabled by application "Rdio" for over 1.00 seconds. Server has re-enabled them.
12/19/2013 8:02:50.849 AM WindowServer[212]: common_reenable_update: UI updates were finally reenabled by application "Rdio" after 2.45 seconds (server forcibly re-enabled them after 1.00 seconds)
12/19/2013 8:03:02.855 AM WindowServer[212]: disable_update_timeout: UI updates were forcibly disabled by application "Mail" for over 1.00 seconds. Server has re-enabled them.
12/19/2013 8:03:08.045 AM WindowServer[212]: disable_update_timeout: UI updates were forcibly disabled by application "Contacts" for over 1.00 seconds. Server has re-enabled them.
12/19/2013 8:03:09.682 AM WindowServer[212]: common_reenable_update: UI updates were finally reenabled by application "Contacts" after 2.64 seconds (server forcibly re-enabled them after 1.00 seconds)
12/19/2013 8:03:10.640 AM WindowServer[212]: common_reenable_update: UI updates were finally reenabled by application "Mail" after 8.79 seconds (server forcibly re-enabled them after 1.00 seconds)
12/19/2013 8:06:59.204 AM WindowServer[212]: CGXSetWindowListSystemAlpha: Invalid window 33 (index 0/1)
12/19/2013 8:07:11.978 AM WindowServer[212]: CGXSetWindowListSystemAlpha: Invalid window 87 (index 0/1)
Hopefully someone looking at the above can determine where the issue lies. I never had any problems with this setup prior to Mavericks.

MBP Retina Display Issues

Ok, so got a new MBPr this week and there are a few issues.
1. When I plug the MBPr into a 27" imac to use as a secondary display it doesn't work
2. When I plug in the HDMI to any other display nothing happens on the other screens, while the MBPr stays the same
3. Has also had problems awaking from sleep
Anyone else having display issues?

I cant speak for other but when I get mine I will post up what I get for you.

MBP 13" Retina late 2012 display issue

Hi,
I have a problem since the upgrade to Maverick :
This is happening :
With the display setup configured to have more space (1680x1050 if i'm right)
After playing a game in 1440x900 or after I connect my TV in HDMI with a replication of the screen between laptop and TV (meaning the retina screen is used in 1920x1080)
After those action, if my MBP go to sleep mode because I don't use it, at wake up I have the display issue at the bottom.
This appeared with maverik, I had no issue before.
If some one have some idea ?
My current work arround is that, after playing game or using my MBP on my TV, I change the screen scale and then the problem is not happening.

1. Reset PRAM. http://support.apple.com/kb/PH4405
2. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, contact Apple.

I have an iphone 4s that is having display issues. If I turn the phone on, it vibrates to acknowledge it successfully turned on but the screen stays solid black. I can plug the phone into my computer and itunes will recognize the phone as well.

I have an iphone 4s that is having display issues. If I turn the phone on, it vibrates to acknowledge it successfully turned on but the screen stays solid black. I can plug the phone into my computer and itunes will recognize the phone as well. However, itunes can not do anything with the phone because the phone is locked and I can not unlock the phone because the screen is black.
>CURVEBALL!!!<
The screen does work though! Through trial and error along side a little troubleshooting, I was able to figure out that the screen will cut on after the phone dies completely. The phone has to die completely with no battery power left. Then if I plug the phone into a charge and wait a while for it to charge, the phone will turn on like nothing was ever even wrong with it. I charge the phone up to like 30% and turn it off then bam the phone turns on but the screen is solid black again.
I am currently in the process of waiting for the phone to die and when I turn the phone back on I am going to completely remove the auto-lock and lock code off of the phone for the time being.
Any other suggestions? Please help!

Sounds like the device was dropped at some point and damaged as a result.
Take it to Apple for evaluation and a replacement.

Display issue on brand new 2014 X1 Carbon Touch

So I was about to start raving about my X1C that I just received. Loving the display, the keyboard, build quality, etc. I had no gripes and was just browsing away when suddenly the screen did the full glitch. I recognize this as what happens when something's messed with the motherboard/display adapter. So I gave it a reset. All was normal and then it happened again. I was able to replicate it 3-4 times and it keeps happening. I never dropped it or anything. It was always just stationary.
I can't believe this. I had problems with the first gen non-touch and touch. I was hoping by now they have improved.
Link to image 1
Link to image 2
Link to image 3
Moderator note: images totalling more than 50k converted to links per forum rules: Lenovo Community Participation Rules

Hi,
Welcome to Lenovo Community Forums!
I’m sorry to hear that you have display issues in your brand new Lenovo X1 carbon.
From the snapshots, it seems like a cable/LCD issue. Is the display working fine when you connect it to an external monitor?
Since it’s a brand new machine, I strongly recommend you to contact our technical support for assistance.
Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
Best Regards,
Mithun.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Repeated iMac Problems, Display Issues now Kernel Panics

I’m lost on what’s wrong with my 2008 iMac and I think I just have to bring it back into Apple for a third time to have it repaired. But something is obviously not working that is causing these issues.
About a month ago, my computer began showing heavy pixilation, flickering images and the on-screen graphics. The computer appeared to keep working in the background from what I could tell so I came to conclusion that it must be the graphics card that’s failing and I’ll need to have it looked at.
My 2008 iMac was custom-built by Apple with the Nvidia GeForce 8800GS that was offered as an upgrade option. There have been several posts on the display and graphics discussion board about that graphics card along with other postings other places about the problems the Nvidia GeForce 8-series had.
The display problems I mention above would not happen immediately, it would happen as the computer warmed up and was used for 3-5 minutes.
Anyway I brought my computer into Apple explained to them what I believed was the problem and the Apple Store technician agreed with me. Because I did not purchase AppleCare, it cost me $400 and a week without my iMac to have that card replaced.
I got the computer back two weeks ago and everything seemed fine. It was working as it always had. I even was running SMC Fan Control in order to keep the computer as cool as I could (the Nvidia problem was related to overheating).
But this morning, this is what I woke up to:
http://img97.imageshack.us/img97/7436/photoijr.jpg
The computer now has a semi-permanent pixilation when it starts up (as suppose to the pixilation 3-5 minutes into use). But more worrisome now is I cannot start up the computer without it going into a kernel panic. I tried resetting the PRAM, I tried starting in safe mode. The only thing I haven’t tried yet is booting from an external HD which I will try this evening (to hopefully isolate it if it’s hardware or a software problem).
The Apple Hardware Test has been unhelpful. When it originally failed three weeks ago, the test showed nothing and this morning when I ran it (permanent pixilation and all), it showed nothing. I feel like if it was a software issue the pixilation would have disappeared during the hardware test because that’s not an OS-X based program.
Here are my specs on this computer:
2008 iMac 24" 2.8ghz Intel Core Duo, 4 gigs of RAM (Crucial Purchased, I have original sticks somewhere), 1 TB HD, Nvidia GeForce 8800GS.

Hi, just to update you, I came home today and did a few things that didn't seem to solve my Mac's problems:
- I booted up from my firewire "safe" drive that I keep a copy os x on to see if I had a corrupted hard drive or something. It booted into the kernel panic I described above.
- I also swapped out the crucial RAM for Apple's factory RAM. It also booted into the Kernel Panic.
In both incidents, the display issues didn't go away. Now instead of pixelization i have vertical bars running in a pattern across my screen.
I'm currently trying to boot onto the OS X CD at this point to see if I could do a reinstall. It's taking quite awhile to boot into that.
With that in mind, I think we're still having graphics card issues or more seriously some logic board problem.

Bizarre & Random Dashboards Display Issues/Errors

Hello,
I am on BI 4.1 SP04 and these dashboards were developed using an equivalent level on the client tool. (4.1 SP04)
Sometimes we get very strange and often random display issues with our dashboards. I have attached screen shots for examples. Sometime we are missing data points from rendering on the charts, other times a line chart will extend into a bar chart. Has anyone experienced this or have any idea what could cause this? It is very frustrating...
Thanks for looking,
Gary
Missing data points on yellow line, yet line rendering with proper data (other wise would have 0's in places, etc)
Green line missing dot on last end point
In this example there are no dots on the yellow line or green line
In this example the blue line has turned into massive columns extending across the charts

This patch should resolve the issue in the last screenshot. I still face the other issues after upgrading to SP3 Patch 4. The dots in line chart take some time to appear. Also, if we use dynamic visibility, the components taking considerable time to appear sometimes. I hope this will also be fixed in later patches. Please share your experience too after applying the patch.

Multi User Calendar Display Issue

When we moved to GW2012 one of our departments that uses a Multi User calendar (5 users in total) noticed some strange display issues.
When User1 is looking at her Multi User Calendar, the client is displaying her appointments in User2's column as well. But if you look at User2's Multi User calendar, you don't see any of User1's appointments in User2's column, so it appears to be a display issue with User1. This same issue is happening with one other user.
All users are on Client 12.0.2, Build 108211 . Interestingly if we look at the calendar on a machine running the GW8 client this display issue does not occur. I have also gone as far as rebuilding the calendar from scratch but this hasn't changed anything.
Any suggestions?
Thanks!
Steve

Hi
If you open a Service Request with Novell Technical Services you will receive this Field Test File patch for the GroupWise 2012 Client. It is specifically to fix issues with multi-user calenders. Please let us know if you are in a position to open an SR.
Many thanks.
Cheers,

MacBook Pro Startup and Display Issues

I've been having some random problems with my MacBook Pro (2.16 GHz, 2 GB RAM, 100 GB 7200 rpm hard drive, ATI Radeon X1600 graphics). Specifically:
1. Lines across the screen and purple boxes sometimes appear.
2. The graphic effects (e.g. zooming a window) sometimes get "frozen" on the screen. In other words a remnant from the animation will stay until the window is refreshed.
3. The Mac sometimes freezes during the startup process. Sometimes the login screen will be unresponsive and other times the Mac will almost bootup but fail when loading startup items.
4. Less frequently the Mac will freeze randomly. I previously had iStat Menus installed and each time the MacBook Pro froze up it indicated both read and write disk activities.
Yesterday I decided to wipe the machine clean and start from scratch in case there were a software issue or corruption on the hard drive that was causing my woes. I completely erased my hard drive and even zeroed the entire disk to make sure everything was completely wiped out. I also disconnected all peripherals to simplify things as much as possible.
The first time I tried the reinstall everything completed successfully but the "Welcome" movie froze part way through. I then had problems running the install again. I was able to boot off the Leopard DVD, but the machine froze a couple of clicks into the install procedure. After numerous tries I was able to erase the hard drive once again and install Leopard. This completed successfully and I installed all updates.
The problems started to show up again almost immediately, however. I installed iLife and iWork and all the updates and had the computer freeze up on me again during a reboot. I also noticed that the display issues started to show up again even before installing any third-party software.
I've tried running disk tests with Drive Genius 2.1, but no errors have been reported. I've also used the freeware Rember program to run memory tests but have yet to see any errors. Sometimes my Mac powers up without any problems and once it's powered up it often stays running for days. The display issues appear quite frequently. I've using iStat Menus to keep an eye on the temperature sensors and everything appears to be normal - so it doesn't appear to be temperature related.
Fortunately the computer's still covered under the extended AppleCare warranty, but I would like to have some idea what's going on before I take it in just in case they're not able to reproduce the issues.
Any suggestions and insights would be GREATLY appreciated. Thanks in advance for reading my rather long-winded message.
Cheers,
Tim

I took my MacBook Pro in for repair and it turned out to be an issue with the logic board. I had the logic board replaced (fortunately it was covered under my extended AppleCare warranty) and these problems are a thing of the past.

13" Macbook (black), Snow Leopard, Boot Camp, Windows 7 display issue

OK I don't know where to post this. I couldn't find an appropriate forum under Boot Camp (nothing for display). Apologies if this is the wrong forum.
I am attempting to run Windows 7 using Boot Camp. Here is the behavior:
Booting Windows 7 without any monitor plugged in works fine.
Booting with an external monitor plugged in, I get the display on the external monitor. Now when I unplug the external monitor, the LCD display backlight is off and is completely dim. I had to reboot it in order for the LCD display to work again.
This is not a macbook display issue. But it has to do something with the way Windows 7, BootCamp are compatible with a macbook. Anyone seen this or know what the fix is?
Thanks
Sri

I can not get my Win 7 (32) os to see my Mac 10.6 partition. Is there something I need to set or turn on to get this to work?
As for your problem, perhaps Windows is not seeing the FireWire bus?

HDMI display issues

Similar Messages

Maybe you are looking for