HDMI does not appear in playback

I have no audio when I connect my HP Pavilion dv4-1435dx Entertainment Notebook PC to my Panasonic TV via a HDMI cord. The picture is great, but audio will only go through my laptop speakers. I have updated all of my devices, I have tried using Intel's website to verify I have all of my drivers updated. I have also checked on my playback to show all disabled devices and HDMI does not appear. I have uninstalled and reinstalled to no avail. I have even verified that the settings on my TV are set to digital audio. I have tried uninstalling the Intel High Definition Audio HDMI, plugged the HDMI cable to my laptop with the TV off, reboot and still no luck!! The only options I have for playback are "Speakers and Dual Headphones", "Independent dual headphones", and "SPDIF" My computer is an upgrade from Vista to Windows 7 64-bit. I am getting way too frustrated over this and have searched every forum imaginable for a resolution to this issue, please help!!

Hi,
Try this to see if it helps. Download the Chipset driver and Graphics driver on the links below and save the installers to your Desktop.
Chipset Driver
Intel Graphics Driver
Next, in Device Manager, open Display Adapters, right click on the Intel graphics chip and select Properties. Click the Driver tab and then select uninstall. When done, do the same for the for the Intel High Definition Audio CODEC and the IDT High Definition Audio CODEC, found under Sound Video and Game Controllers.
Now return to the Desktop and install the Chipset driver and then the Graphics driver. When complete, reboot the notebook and see if this has helped. Check in Device Manager that both the Intel Graphics and the Intel Hi Definition Audio codec have reinstalled successfully and whether you now see the HDMI Audio option under playback devices ( found in Control Panel, Sound ).
If it shows up correctly, try the HDMI connection and see if it now functions properly.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

Bluetooth speaker does not appear in "playback devices" list

I'm having trouble controlling my new Auvio HBT2000W speaker via bluetooth from my Y580 ideapad running Windows 8.1. They successfully pair, but the speaker does not appear in the "playback devices" to output my audio to. This may be related, but when in "devices and pritners", if I right click on the Auvio HBT2000W and select "control", the window that pops up (shown below) always closes after about 2 seconds. I have tried all the unpairing/repairing, restarting, etc.I've tried updating the bluetooth driver with the one posted on this website.I've disabled the "allow the computer to turn off this device to save power" on the Qualcomm Atheros AR8161 PCI-E Gigabit Ethernet Controller (NDIS 6.30)I've made sure that all "services" are enabled in the properties window for the Auvio HBT2000W.I've even tried the Windows troubleshooter... which of course says that everything is fine and working properly. Anyone seen this before or have any ideas?Thanks!

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
 Cheers, Tom

Msi gt70 2PE integrated HD 4600 graphics HDMI port does not appear to work.

Hi guys,
I have the GT70 2PE with integrated hd 4600 graphics and with a dedicated nvidia geforce gtx 880m card. The HDMI output does not appear to work.
I'm tech savvy and cannot figure this out for the life of me. have tried nearly everything.
lets start from the low level troubleshooting done:
- plugged in the HDMI cable from a working computer that has HDMI hooked up to it. This did not make a difference from the new cable I bought for hooking up my TV to my laptop.
- booted the laptop up and do not see a duplicate screen outputting via HDMI, all my video cards in my PC's I've built prior have always shown the HDMI output as a duplicate screen when I had a monitor hooked onto a PC. This makes me believe the HDMI port may be disabled/broken as there is no HDMI output at POST. Only the laptop monitor displays output.
In Windows 8.1 I've installed the latest 4600 drivers and nvidia 880m beta drivers.(even though installing nvidia drivers shouldn't matter since I've read the HDMI output is tied to the 4600 integrated graphics chip, also if during POST the HDMI output never showed up on my TV, then installing the latest intel graphics drivers shouldn't have made a difference either, which it didnt make a difference).
I've tried disabling the integrated graphics card then re-enabling it, as noted on the intel forums. - does nothing.
what I've ruled out:
-HDMI cable issues = no issues due to other PC's and devices working with the cables. All cable tests are direct connect to the TV, no intermediary devices such as hdmi splitters etc.
-BIOS has zero options for graphics card options.
Any ideas before i RMA this laptop? I'm at a loss.

OP's problem has been solved. Also please don't resurrect and do not hijack other people's topics. Open your own one.
>>Please read and comply with the Forum Rules.<<
Topic Locked

Hdmi does not work

I am trying to hook up a logitech revue unit to my hitachi hdtv. It requires an hdmi input. When we first got fios, (qip 6200 p2 stb), no amount of fiddling with cables, settings and what not got hdmi to work. After much frustration, etc. said to hell with it and went with component output. Worked fine. Now I need hdmi. TV keeps saying "no video signal. " Tried all three hdmi tv ports and tried all tv input option settings. No go. It did come on intermittently , but only after an un-acceptable delay. Yes! I did disconnect the component outputs before trying the HDMI. have rebooted and resetted the world to no avail. According to the various forums, this Motorola hdmi fiasco has been ongoing for almost three years. I want a fix, ASAP. Or at least a reliable date for a fix. BTW I am an EE+ computer science engineer. I've tried the entire customer service 101 stuff so please don't tell me to change my cables.
Boris {edited for privacy}

As I said in my posting, I am a professional. I would not have bought the unit had I not seen the logitech listing of compatible STB. Also, be assured that I have hooked it up correctly. There does not appear to be any way to do it wrong.
1. STB hdmi OUT to Revue hdmi IN
2. Revue HDMI OUT to TV HDMI IN Tried all three ports. NO Go.
How pray tell could I have screwed that up?
Read my post please. Went through the cable **bleep**
Revue HDMI out to TV works okay I get a signal and can start the initialization procedure. I have a wifi problem which
I may fix by opting ethernet if high gain antenna does not fix. As I said, I am a professional..i have read thoroughly the Actiontec (router), logitech and Verizon Forums. This STB misbehavior is endemic to to the benighted Motorola STB and has been endemic from the start. Obviously, Logitec testing of the Motorola STB was inadequate. My original question
stands, since the MOtorola STB does not work on HDMI. Please confine your reply to a substantive response to my question.
1. When will the Verizon STB be made to provide fully functional HDMI outputs.
if not that,
2. When will Verizon provide a fully functional STB?
BorisBeizer
MSEE ( Uof P 1963) PhD Computer science (ditto, 1967).

Moved recording does not appear as content

I recently encountered an issue where, when I attempt to move a recording from under a meeting to a Shared Content folder, either the list of Shared Content folders does not appear or, when the move is "successful", the recording is bot listed in the new content location. Interestingly, if I change the URL of the destination location from "content" to "meeting" (http://server/admin/content/sco/... to http://server/admin/meeting/sco/...), the recordng will appear in the list. Unfortunately, under this "meeting view", there is not any editing or offline functionality. The link for the recording continues to be functional and playback works normally, but the recording is otherwise treated as a "meeting" rather than content.
Using the API, I used the sco-by-url XML action to compare the values of an affected recording to an unaffected one, but could not find anything that appeared unusual. Both recordings were identified as the "content" type.
Atempting to edit the video, or make an offline copy, by modifying the usual link produced by clicking those button with the appropriate url-path generates a "Not Found - The selected resource does not exist" error. The editing and offline copy processes worked normally prior to the move.
We are currently running Adobe Connect version 8.2.0.0:
package=8.2.0.1.156.20110921.963902
installer=8.2.0.0.11.20110728.938680
fmg=8.2.0.0.4.20110906.879854
fms=8.1.1.0.2.20110427.772086
presenter=8.2.0.0.6.20110824.924658
cps=8.2.0.1.3.20110920.973276
mssql=8.1.0.0.10.20110311.8644363
teleintercall=8.1.0.0.2.20110207.776631
telepremierena=8.1.0.0.21.20110412.882778
telepremiereemea=8.1.0.0.21.20110412.882778
cpshelp=8.2.0.0.4.20110908.964981
addins=8.2.0.0.3.20110831.929039
dbscripts=8.2.0.0.23.20110818.956139
teleavaya=8.1.0.0.4.20110412.882778
telecisco=8.1.0.0.17.20110412.882778
telemeetingone=8.1.0.0.2.20110207.776631
telephonyservice=8.1.0.0.8.20110228.847019
tomcat=6.0.29
stunnel=4.28
Is there another mechanism Adobe Connect discerns between the content and meetings so far as under with view/interface it will be displayed? Is there a way to correct this behavior for existing files? Thanks for any insight.
Eric

Having support look at this may be the best option. Since you are using your own server, you should call 866-335-2256, wait for the second round of prompts and then option 1. Have your support contract number ready when you call.

Tv shows menu does not appear in ATV 2

The 'TV shows' menu item does not appear in my brand new Apple TV 2. I have rebooted a couple of times. Any help appreciated

Thanks for the answer. After more research I realise that as I'm in Australia and there are no TV show rentals here that is why there is no TV Shows menu item. This is despite the fact that the Australian AppleTV 2 site shows a screen shot of the Apple TV menu with 'TV Shows' on it. When you read the text it does not mention TV shows. What I find most annoying is that there doesn't seem to be a way to access the Itunes store from the ATV2. With ATV1 I could watch a TV show and if I wanted to immediately buy the next episode or the whole series I could do so from my ATV1 iTunes interface. Now with the new ATV I can watch a show through home sharing if I have already purchased it but if I want to buy the next show I have to get up from the TV room, go to the study, buy the show on my iMac and then wait for it to download to stream to my ATV2. Is this user friendly progress?
While I understand that ATV2 is for rentals and that there is no hard drive storage, I can't believe that Apple couldn't come up with an interface that allowed the ATV2 to access and browse the iTunes store and then download purchased items to the iMac for streaming.
As a, hopefully temporary, solution I have reconnected the ATV1 to a different HDMI input, and synced only unwatched TV shows. This will allow me to then purchase new shows (or movies), which will be stored on iTunes for later streaming via ATV2.
Am I missing something or is this the only solution?

RDXV60KB - tuning menu does not appear after PSU exchange

The previous fault of switching off has been cured by replacing the PSU but since then the tuning menu does not appear.
The other fault is when selecting VIDEO the channels can be seen but on HDD and DVD there is only sound and a blank picture.
This is the same using HDMI and Scart sockets.
The ribbon cables have been eliminated by substitution and are assuming the fault has been caused by the original fault

> The previous fault of switching off has been cured by replacing the PSU but since then the tuning menu does not appear.
Not quite sure what kind of advices do you expect from this community but according to the information posted in your original post, there is definitely a hardware related problem and there is only one solution: the faulty parts needs to be replaced . This can be done by service technicians available in your country.

Film does not appear in Itunes Library

Itunes crashed during playback of a movie and now after a restarting both Itunes and my computer separately the film does not appear in my library. I (probably me being silly) cannot seem to find a method of re-downloading the product even though the item appears in my account history as being purchased. I would very much like to be able to find this item in my library again.

Have you searched your computer to see if the film is still on your computer, just not in iTunes - by default on Windows 7 your iTunes library is stored under :
\Users\username\My Music\iTunes
If it is then you can add it via File > Add To Library.
If not then whether you can redownload a film depends upon what country that you are in (they can't be redownloaded in all), and if the film is still in the store (rights-holders occasionally remove their items from the store) - and whether you've changed countries since buying it. If you can redownload it then it will show under the Purchased link under Quicklinks on the right-hand side of the iTunes store home page on your computer's iTunes - if other films show there but not that one (and it's still in the store) then check to see if it's hidden : iTunes Store: Hiding and unhiding purchases.
If you can't redownload it then do you have a copy of it on a backup of your library/downloads that you can copy it back onto your computer from ?

I am trying to set up Sharing amongst several computers on my home network. I have followed all the setup instructions but after completion Sharing does not appear in my iTunes window (on any of the computers I've set up). There is no explanation why.

I have been trying to set up Sharing between two computers on my network. I did this once and it worked. However, when I try to set this up now the Sharing feature does not appear on the left side of the iTunes window (on either computer). There is no explanation as to why not. Is this a configuration problem, a network problem or what? Can it be fixed? I have tried turning sharing off and back on on both computers but to no avail. What am I missing? Thanks for any help you can provide.

Hey innerev2003,
Thanks for the question, and welcome to Apple Support Communities.
If, while searching through your past purchases, items are unavailable to download and show a "Purchased" button, they are still on your computer. It may be best to search your iTunes library by clicking Music, then use the search bar at the top right.
If you are completely sure the items are no longer in your library, try signing out of the iTunes Store, and then back in.
iTunes 11 for Windows: Manage your iTunes Store account
http://support.apple.com/kb/PH12507
Thanks,
Matt M.

Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

Reboot the machine holding Command and r keys down, you'll boot into Lion Recovery Partition
In there will be Disk Utility, use that to select your Lion OS X Partition and Repair Permissions.
After that is done reboot the machine and see if you can log in.
If not repeat the above steps to get into Lion Recovery, get online and reinstall Lion again, it will overwrite the installed version and hopefully after that it wil work.
Reboot and try again.
If not follow my steps to create a Snow Leopard Data Recovery drive, then option boot from it and grab a copy of your files off the machine.
Then reinstall all your programs onto the external drive like setting up a new machine, then use Disk Utility to erase the entire internal boot drive (select the drive media on the far left, not the partiton slightly indented) format Option: GUID , 1 partition OS X Extended and then use Carbon Copy Cloner to clone the external to the newly formatted internal drive. Once that is finished reboot and disconnect the external drive.
Once you go that, boot into Snow Leopard and update to 10.6.8, use the AppStore and option click on Purchases and download Lion again and install.
Lots of work, but there is no Lion disks.
https://discussions.apple.com/message/16276201#16276201

BPM Application Link does not appear in BPM Workspace (11.1.1.7)

I spent huge amount of time to reveal why does that happens.
All that follows further is valid for BPM Suite 11.1.1.7.
The scenario.
You developed a simple BPM process with Initiator pattern (maybe by following the "Quote Request" tutorial).
But the application link did not appear in BPM Workspace.
Here i'm skipping any kind of mistakes as "oh, incorrect swimlane", "oh, i did not include the user to the app role" and so on.
At first, you should know about the "feature" - You have to attach task form to the Initiator Human Task to see the App Link.
The simplest way to do that is to AutoGenerate task form (and deploy it, of course).
Else the Appication Link will not appear.
One exception to this rule - If your Task HAS NO PAYLOAD (no parameters) the Task Form is not required (to appearing of the Application Link).
The second find is a bug (is think so).
If you edited the Role that Attached to the swimlane of Initiator Task, you will not see the Application Link.
If you look to organization.xml you will see something like this:
        <ns1:applicationRole id="StartTask.InitRole" isProcessRole="true">
            <ns5:name>StartTask.InitRole1</ns5:name>
            <ns1:processRole id="InitRole" name="InitRole1"/>
        </ns1:applicationRole>
The Application Link will appear ONLY IF THE "applicationRole id", "applicationRole name" and "processRole id" have the same value.
When you edit name of the application role in Organization Editor you change "applicationRole name" and "processRole name" values.
After that "applicationRole id" != "applicationRole name" and the Link does not appear.
How to fix?
Just edit organization.xml (with external editor) - change the "applicationRole name" to the value of "applicationRole id".
That allows to have value of "processRole name" something like "The Initiator Role" - that value appears in the BPMN diagram of process.
Also you can edit organization.xml with Organization Editor and set the Name to the value of "applicationRole id".
In that case the associated swimlane will have the same name as the "applicationRole id".
Hope this helps somebody
Oleg

Flash Player is a browser add-on, not an executable program.
If you need to open a local SWF file you will need the standalone player (Projector) from http://www.adobe.com/support/flashplayer/downloads.html
Note that the download is the player, not an installer, so you will need to make the file association manually.

File Place does not appear on my menu. Neither does Tools Photoshop Image processor.

In Bridge File>Place is grayed out on my menu. Tools>Photoshop>Image processor does not appear at all. I have reset the preferences numerous times and am good to go until I shut down my computer. When I reboot they are gone again. I have a Mac with OS 10.10.2 (Yosemite) and CC.

Mardi Carter wrote:
I shut down using "Shut Down" under the Apple menu.....always…
Well, that's fine for the OS, but sometimes not so great for Photoshop. Try QUITTING Photoshop from the Photoshop menu, or by Command Q, before you get anywhere near your Apple menu .
Gene gave you sound advice, but don't forget to run Repair Permissions with Apple's Disk Utility before and after any installation, upgrade or update of the OS or any application.
You'd think that shouldn't be necessary, but it is indeed vital, indispensable routine maintenance.
Forget about "it had never happened before", Yosemite is a work in progress. Apple never gets a major OS X release right until about the dot four or five release, so Yosemite has a way to go before it's at 10.10.4 or 10.10.5. That has proven to be the nature of the beast.

Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applica

Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applications.

I received no error message. The application was just trying to find applications unsuccessfully.
I am using MAC OS 10.10.1
I tried to uninstall the application but it seems that a kind of deamon is still installed thus providing me to reinstall properly. Do you know where are the elements to remove in order to get my machine just like before ?
Otherwise I would have to reinstall everything and this would be a pain.
Thanks for your help.

HT204266 I downloaded AirPlayIt yesterday from the app store. It was on my iPad yesterday. Today, however, the app icon does not appear on my home screen. When I go into apps it is there but it doesn't have an "Open" choice. There is only a cloud with

I downloaded AirPlayIt yesterday from the app store. It was on my iPad yesterday. Today, however, the app icon does not appear on my home screen. When I go into apps it is there but it doesn't have an "Open" choice. There is only a cloud with an arrow pointing down. When I click on the app it pops up but there is no open button. How can I remove it? Tapping it won't work as it isn't on my home screen.

You'll have to contact the developer about this. Apple doesn't make this app;

Media Manager does not appear on my second stb

I downloaded Verizon Media Manager and installed it without problems. When I checked my HD stb the program is listed and I could use it. I do not have any kind of recorder on the network. When I check my non HD stb the VMM does not appear. This is the unit I want to use as it will allow me to play music through the home theater sound system.
So, am I limited because I do not have a recorder or does the feature not work on non HD stb? If this is the case, I might as well delete the program from my PC.
Solved!
Go to Solution.

Hi. I apologize for the inconvenience. Unfortunately at this time, the standard def STBs do not work with Media Manager. It doesn't have to be a DVR, but the stb has to be an HD box. If you do not wish to upgrade the STD box at this time and depending on your setup, you can always swap the STBs and move the media manager functionality to where you want it.

HDMI does not appear in playback

Similar Messages

Maybe you are looking for