HDMI Driver Missing/Cannot install HDMI Control Manager

I have a satellite M645-S4070 with OS Windows 7 (64bit). My HDMI port recently stopped working, first the sound now the display altogether, in an attempt to locate it in device manager it appears to be missing. I assumed I could reinstall the driver for it, but only found the HDMI Control Manager download; hoping that would help I attempted to install it and it starts up, then shuts down immediately. I am not sure if I am even attacking the problem correctly, but if anybody has had a similar problem and may know what is going on any suggestions would be very much appreciated. Please do not tell me after my warranty, literally, just expired that the HDMI port has failed me...
Side Note: The HDMI cable does in fact work

I have done 2 system reinstalls. Both times the first time I tried the HDMI port worked great! The 2nd time I attempted to use it, it did not work once again. I have gone and tried to right click repair on the HDMI control manager and it tells me I cannot fix something that is not instlled... So, I attempted to right click run as admin and it tells me ***IS_STRING_NOT_DEFINED***. I have no clue what this means, but I assume it has something to do with the install shield not working properly. I can't see this as a hardware malfunction considering it works and then it doesn't.

Similar Messages

  • Cannot install Grid control 11g because of repository creation failure

    I cannot install Grid control 11g (on AIX6.1 and 11.2.0.1 database) because of repository creation failure with following log emschema.log.CREATE
    2012-10-29 17:44:49,729 [Thread-190] ERROR emschema.17oypu8dqqrf7 - ERROR:FATAL Configuration Exceptions
    Execution Exception
    null
    2012-10-29 17:44:50,162 [17oypu8dqqrf7] ERROR emschema.17oypu8dqqrf7 - Schema Action Failed
    2012-10-29 17:44:50,163 [17oypu8dqqrf7] ERROR emschema.17oypu8dqqrf7 - java.lang.Exception: The last RCUModel exit status code is not SUCCEEDED.
    2012-10-29 17:44:50,164 [17oypu8dqqrf7] ERROR emschema.17oypu8dqqrf7 - Schema Action Failed
    2012-10-29 17:44:50,167 [17oypu8dqqrf7] ERROR emschema.17oypu8dqqrf7 - Running RCU Failed with Exception Trace
    The last RCUModel exit status code is not SUCCEEDED.
    and rcu.log:
    RCU Logfile               : /ugp1apl/oracle/product/grid/middleware/oms11g/sysman/log/schemamanager/m_102912_0530_PM/m_102912_0530_PM.CREATE/rcu.log
    RCU Checkpoint Object               : /opt/oracle/product/grid/middleware/oms11g/sysman/log/schemamanager//RCUCheckpointObj
    Component schemas created:
    Component               Status     Logfile          
    EM Repository Creation Configuration          Failed     /ugp1apl/oracle/product/grid/middleware/oms11g/sysman/log/schemamanager/m_102912_0530_PM/m_102912_0530_PM.CREATE/em_repos_config.log
    EM Repository Init Configuration          Success     /ugp1apl/oracle/product/grid/middleware/oms11g/sysman/log/schemamanager/m_102912_0530_PM/m_102912_0530_PM.CREATE/em_repos_init.log
    EM Repository Common          Success     /ugp1apl/oracle/product/grid/middleware/oms11g/sysman/log/schemamanager/m_102912_0530_PM/m_102912_0530_PM.CREATE/em_repos_common.log
    2012-10-29 17:44:49.887 NOTIFICATION rcu: oracle.sysman.assistants.common.util.SilentMessageHandler::writeToLog: Repository Creation Utility - Create : Operation Completed
    Database has 11.2.0.1 version and setup according installation guide(init parameters and so on...), what's wrong?
    Edited by: mariok on Oct 31, 2012 2:11 AM

    In install guide is written: http://docs.oracle.com/cd/E11857_01/install.111/e15838/install_em_exist_db.htm#CIAIGDIH
    „No environment variable specific to Enterprise Manager Grid Control needs to be set prior to installation. The ORACLE_HOME and ORACLE_SID variables should not be set; Oracle directories should not appear in the PATH.“
    When I'v set up following variables everything went fine:
    ORACLE_HOME=/opt/oracle/product64/11.2.0.1
    ORACLE_SID=UAGRID
    PATH=/usr/java6_64/bin:/opt/oracle/product64/11.2.0.1/bin:/usr/bin:/etc:/usr/sbin:/usr/ucb:/usr/bin/X11:/sbin:/usr/lbin:/root/MSP/bin:.:/usr/local/bin:/u1/oracle/SCRIPTS:/opt/oracle/product64/11.2.0.1/OPatch

  • Lync Server 2013 Standard Deployment: Cannot Open Service Control Manager...

    Hi
    thanks for any advice.I've just install Lync 2013 Standard as the steps in Technet,When I publish the topology,meet the error as listed.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.XdsDatabase'****
     Initializing DbSetupBase
     Parsing parameters...
     Found Parameter: SqlServer Value lync2012ek.ek2012.net\rtc.
     Found Parameter: SqlFilePath Value C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup.
     Found Parameter: Publisheracct Value EK2012\RTCUniversalServerAdmins.
     Found Parameter: Replicatoracct Value EK2012\RTCUniversalConfigReplicator.
     Found Parameter: Consumeracct EK2012\RTCUniversalReadOnlyAdmins.
     Found Parameter: Role Value master.
     Trying to connect to Sql Server lync2012ek.ek2012.net\rtc. using windows authentication...
     Exception Stack:
     Type: System.InvalidOperationException, Message: Cannot open Service Control Manager on computer 'lync2012ek.ek2012.net'. This operation might require other privileges.
     Type: System.ComponentModel.Win32Exception, Message: Access is denied.
    best regards,
    George
    George Guo

    please verify your computer name while you creating FQDN pool FQDN of Server name
    example
    computer name
    is server1
    domain name is abc.ae
    so,
    your FQDN pool name will be server1.abc.ae
    problem solved :)

  • I have Windows 7 and for some reason I cannot install Adobe Type Manager onto my Computer. I need ATM to install the DIN font but am having no luck what so ever. I can see the DIN font in my Dropbox but it is showing up like this:-  ._DIN-bold, no file fi

    I have Windows 7 and for some reason I cannot install Adobe Type Manager onto my Computer. I need ATM to install the DIN font but am having no luck what so ever. I can see the DIN font in my Dropbox but it is showing up like this:-  ._DIN-bold, no file file extension. what am I doing wrong? is it Mac?

    (1)    Adobe Type Manager (ATM) is not compatible with any version of Windows beyond Windows XP (32-bit, only). Attempting to install ATM on any newer version of Windows may actually disable Window's capability of rendering Type 1 and OpenType CFF fonts, requiring a reinstallation of Windows.
    (2)    There is no need to use ATM to install any fonts under Windows.
    (3)    The file name ._DIN-bold is indicative of a MacOS font. These fonts cannot be installed on Windows systems.
              - Dov

  • Cannot install Adobe Application Manager. I get error message: "Installer failed to initialize".  What can I do about this?

    Hello,
    Cannot install Adobe Application Manager. I get error message: "Installer failed to initialize".  What can I do about this?

    if mac:
    go to HD>library>application support>adobe>caps and rename the caps folder.
    go to USER library>application support>adobe>OOBE and rename OOBE folder
    install Adobe application manager from below link.
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774

  • Cannot install adobe applications manager in win 7 pro

    cannot install adobe applications manager in win 7 pro - what can I do as I cannot get updates?

    kissakikai
    Thank you again for trying to reply in your thread.
    For some reason, the reply is being posted without a message included...just an empty reply. Are you putting any contact
    information in your post so that the system is blocking out that information?
    Could you give it one more try. Looking forward to continuing the troubleshooting of your issue with you.
    If your posts continue with no message included, you may need to seek help on the posting matter in the
    Adobe Comments Forum
    Forum comments
    ATR

  • Late 2008 mbp - installed new ssd - trying to boot from snow leopard iso on flash drive - says 'cannot install mac os on this computer'

    Hello -
    I just installed a new M500 Crucial ssd in my late 2008 mbp - everything was working fine on old hard drive (running snow leopard) but was getting slow and wanted to upgrade - i lost my snow leopard disk when moving from hawaii so i found an iso online - using a flash drive i partitioned the disk and made the bootable image on flash drive - formatted as extended/journaled - switched out the hard drives - plugged in the flash drive - started the comp - held option - install begins to boot - choose language - all is fine - choose english - next step window pops up saying 'cannot install os on this computer' - click on utility but all options are greyed out - disk util is greyed out - only options it gives is to start from backup or restart - real confused here - all help appreciated - thanks in advance and happy new year!

    Snow Leopard comes in discs only.  The USB drive may be a counterfeit and/or corrupt.  There are two options for you: 
    Get replacement original OSX installation disks from Apple customer service.  Have your MBP serial number ready and there is a charge.
    Or two, purchase a Snow Leopard disk from the Apple online store:
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    Ciao.

  • Cannot install Adobe Application Manager

    When I install this, I first get an error saying another instance is already running.  The installation then proceeds and goes through the motions installation but at the then, I get an error saying "Adobe Application Manager failed to install".  I've combed through my Windows Task Manager for things like "PDApp.exe" and "setup.exe" but I couldn't find any.  I have a bazillion processes running and I don't have time to go through each one trying to figure out which is the right one.  How do I install the Application Manager?  It seems like all the CC apps needs the updated version of Adobe Application Manager in order to install.

    Problem resolved.  I called the 800 # and spoke with a technical support person in India.  The steps to resolve were to rename the directory paths (2 of them) that pointed to the old Adobe Application Manager, then download the Adobe Cleaner Tool and use it to remove the Adobe Creative Cloud Desktop App.  I logged off and then logged back in and re-downloaded the Creative Cloud Application manager and I was able to download (finally) Photoshop CC.
    The old Adobe Application Manager came with my CS6 installation.  It was probably running but it did not show up in the Windows Task Manager as either an application, process, or service.  It also could be be uninstalled through Control Panels without having to remove CS6 altogether.

  • Cannot install ICloud Control Panel to Laptop using Windows 8

    I cannot install the ICloud Control Panel on our Laptop.
    Tried several times to install but get an error code at the
    very end of the install. Not sure why.
    Installed perfectly on another PC.

    I have the same issue on my new laptop running Windows 8.1. When trying to install iCloud Control Panel 3.1 it stops at 'Updating component registration' and displays the alert 'the process cannot access the file because another process has locked a portion of the file'.  Can anyone help?

  • Cannot install Activex control for WVC54GC / no puedo instalar Control Activex para camara WVC54GC

    Hello everybody,
    I log on the internet address for my camera, hit the view video link and after clicking on "install ActiveX control" I get a pop up security alert saying "Windows has blocked this software because was unable to determine origin". I have tha latest firmware installed and camera is working fine but I cannot access my camera from my laptop when I´m away due to this issue. Thanks in advance for your help.
    Hola,
    Cuando ingreso a internet y hago click en el enlace de "ver video" y luego click en "Instalar control ActiveX" me sale lugo un mensaje de: "Windows bloqueó este software porque no puede comprobar el fabricante". Gracias por su ayuda.

    Before you try to install Active X Control on your PC, Disable the Firewall and Antivirus on your Computer, and then Lower down the security of your Internet Explorer.
     Opend Internet Explorer....
    Tools
    Internet Options
    Click on the Security tab
    Under "Select a zone to view or change security settings" select "Internet" 
    Below click on "Custom Level"
    Under "Download Unsigned Activex Control" Select "Enable"
    Click Ok and again Ok. 
    Now try to View your camera, if you get that prompt to install Active X, then you need to allow it. Once installed Active X on your computer, you will be able to view your camera.

  • Error 1723 - Long time loyal Blackberry TOUR user - cannot install recent desktop manager

    I cannot install the latest desktop manager on Windows 7.  I have used this phone for YEARS and also syncd fine.  Now I am dead in the water.  The latest install package needs TO BE FIXED.  Well into the installation I get the following message:
    "Error 1723. There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor. ActionRepairRimUsbDriverNT.07D232B6_7904_4970_8B22_8F…"
    I have resisted the urge to "upgrade" to the popular newer smart phones from other companies, but I will have to leave Blackberry forever if this problem is not fixable (fixed) within the next few days.
    Please help.
    Mike B

    Hi and Welcome to the Community!
    Ramgopal wrote:
    Check this url..
    https://swdownloads.blackberry.com/Downloads/entry.do?code=15CF76466B97264765356FCC56D801D1
    Select your Blackberry Model - Your Service Provider.- Verify the Blackberry Desktop Software, which displays and download the latest related to your model.... Those are specifically suitable for your blackberry model... Hope this help..
    Actually, not quite...the issue for the OP was the Desktop Software, the link you provided is for Device Software. Indeed, the full portal for Device Software is thus:
    http://us.blackberry.com/support/apps-and-software/desktop-and-device-download-sites.html
    There is only one version of Desktop Software, while there are hundreds of versions of Device Software. The Desktop Software, installed to the PC first, followed by installation to the PC of the specific Device Software, is the best way to ensure proper functionality between the PC and the device. However, as with all technology, there is no 100% guarantee.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Cannot install icloud control panel on yoga pro 3

    I am unable to successfully install iCloud control panel. I get the following error message.
    "There is a problem with this Windows Installer package.
    A program run as part of the setup did not finish a expected.
    Contact your support personnel or package vendor."
    Help!!

    No, Windows XP is not supported.
    iCloud supported system requirements:
    http://support.apple.com/kb/HT4759

  • Cannot install Business Contact Manager - trying to run another application

    Hello
    I am trying to install Business Contact Manager for Outlook 2013, but every time when I run the installation file and the file extraction starts, a window opens trying to install a completely different programme - Wunderlist, which I had on my computer.
    I deleted all of the files related to Wunderlist and tried to install BCM again, but the same thing happens over and over again. I took a snapshot of the error message. After every attempt, I find a file of the type ClickOnce Application Deployment Manifest
    related to Wunderlist C:/Users/rg/AppData/Local/Microsoft/Windows/TemporaryInternetFiles/Content.IE5/T5VFSWN6/Wunderlist.application
    Is this a problem with BCM or Wunderlist? Has anybody had a similar problem? Any suggestions how I can solve this issue?

    Hi,
    Make sure you downloaded Business Contact Manager from Microsoft, if no, please download Business Contact Manager from this link below:
    http://www.microsoft.com/en-us/download/details.aspx?id=36513
    I actually haven't seen the same issue before, you may perform a clean boot to install BCM, this will help forbid the interference by other programs:
    http://support.microsoft.com/kb/929135
    Regards,
    Melon Chen
    TechNet Community Support

  • Cannot install iCloud Control Panel on two XP PCs.

    On two different XP PC's I receive the following message when i attempt to install iCloud Control panel "iCloud requires that your computer is running Windows Vista or newer". XP is up to date.

    No, Windows XP is not supported.
    iCloud supported system requirements:
    http://support.apple.com/kb/HT4759

  • Cannot install Performance Reporting Manager - Corrupt db?!?!?

    Hi all,
    We previously had PRM running but disabled it as it didnt seem to run very well. We are trying to reinstall it now but are hitting a few problems.
    Launching /opt/SUNWsymon/sbin/es-uninst and selecting the Performance Reporting Manager option to uninstall fails:-
    Unable to complete Sun Management Center cleanup
    Error cleaning up core schema ...
    Performance Reporting Manager database environment not completely removed.
    Please see /var/opt/SUNWsymon/install/uninstall_swpv-smc-phys.110222133640.28859 for more details.
    PRM database removal failed
    A problem occurred with Performance Reporting Manager uninstall.
    Making list of packages to uninstall...
    Sorting list of packages according to reverse timestamp...
    Removing package : SUNWesdrg...
    Removal of <SUNWesdrg> was successful.
    Removing package : SUNWessrg...
    Removal of <SUNWessrg> was successful.
    Removing package : SUNWeslrg...
    Removal of <SUNWeslrg> was successful.
    Removing package : SUNWescrg...
    Removal of <SUNWescrg> was successful.
    Removing package : SUNWesprm...
    Removal of <SUNWesprm> was successful.
    Removing package : SUNWesarg...
    Removal of <SUNWesarg> was successful.
    Looking at the "/var/opt/SUNWsymon/install/uninstall_swpv-smc-phys.110222133640.28859"; log I can see:-
    Starting database...
    Successfully enabled service sunmc-database
    Found previous reference schema
    Database Error Encountered...
    ERROR:  function sp_delete_group_objects() does not exist
    HINT: No function matches the given name and argument types. You may need to add explicit type casts.
    Unable to complete Sun Management Center cleanup
    Error cleaning up core schema ...
    Stopping database...
    Successfully disabled service sunmc-database
    Performance Reporting Manager database environment not completely removed.
    Please see /var/opt/SUNWsymon/install/uninstall_swpv-smc-phys.110222133640.28859 for more details.
    PRM database removal failed
    As I cannot uninstall all the database correctly I can't seem to install it either, even when I select NOT to preserve data.
    Any help would be appreciated.
    Cheers
    Neil

    Got it working. Can now use my DiNovo Keyboard without its dongle. Yeah. NO BSODS.
    This is what I did. I put in the dongle for the keyboard, rebooted to an account with Admin privileges, used flashcards to go to BT not the F8 key the actual BT one that shows your comp name and ID#. I removed the dongle for the keyboard, turned on the keyboar adn clicked its connect button, clicked the flashcard and it brought up BT Settings.  It did not BSOD.  So I think Imo454 has it right about the dongle and using it for drivers.  Although it did not show anything installing.  Set up device, it saw keyboard, I configured settings, closed BT setting manager and now have Icon in tray and BT information manager works.
    Reinstall your stack again and then try this.  I also gave my users permission to the BT Manager and BT Info.  I don't think that made a diff but it can't hurt.  Not full permission but write and mod as well as the standard read. 
    The Toshiba stack from what I can tell is very persnickity.  Everywhere I  have read to fix this talks of this.  I got my stack from the Toshiba Europe site.  They have more current stacks than USA.  Plus if you run on Toshiba HW you do not need a new key.
    Thanks to you Imo454 and to Jerry.

Maybe you are looking for