HDMI Driver

Hi,
I am using an HP Notebook (Product number: K8T57PA#ACJ). Please help me locate the HDMI driver for this notebook (OS = WINDOWS 8.1 64 BIT). 
Currently I am not able to connect the laptop to my TV using HDMI cable. 
Thanks!
Upamanyu

Hi @Upamanyu ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP 15-r119tu Notebook and connecting a monitor or to a TV with an HDMI Cord.
Here is a general document on troubleshooting issues with the HDMI connection as there are not drivers to download.
With the HDMI cable connected have you restarted the Notebook?
When you remove the cable from the TV does it give you a sound or sounds from the site you are working with?
Have you tried a different cable?
I hope this is helpful.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Similar Messages

  • Where can i get an hdmi driver so i can get sound in my tv when connected to my hp pavilion dv6

    where can i get an hdmi driver so i can get sound in my tv when connected to my hp pavilion dv6

    Hi,
    HDMI sound is actually comes with the video card. DV6 is a reries of dozens if not hundreds of models, which one is yours ? Please use the following steps to check and fix:
    General Instructions for Setting Up HDMI Audio
    Preliminary steps:
    1. Plug the laptop into a power source. Some of the models have a power management scheme that will not allow for HDMI audio while running on batteries. Later, after you get your HDMI audio working, if you find that it still does not work on batteries you can change your power management settings in the Control Panel.
    2. HDMI has its own audio driver separate from the audio system of the computer ( Sigmatel, IDT, or Realtek ) . It is incorporated into the graphics card's driver so make sure you have the newest version of your graphics card driver. On models with Intel graphics the HDMI audio driver will appear in the Device Manager as "Audio Device on High Definition Audio Bus".
    3. Turn off the computer and TV before connecting the HDMI cable. Later, after you get your HDMI audio working, if you disconnect the cable while the computer is running and lose your audio, try closing and then re-opening whichever program you were using that generates audio.
    4. Every time you try a different solution you should reboot the computer. HDMI audio is extremely finicky and seems to usually need a reboot.
    Make the Connection:
    1. Connect the HDMI cable to the computer and TV. If the TV has a "DVI/HDMI" port do not use it. Use a port for HDMI only.
    2. Turn on the TV and select the HDMI port you are using. Adjust the TV settings to receive HDMI audio if any.
    3. Turn on the computer. (Optional, some people close the laptop lid immediately after hitting the power button but I am not sure why. Most people should not need to do this.)
    4. Optional. Some models do better if the TV is set to be the primary display. To set, repeatedly press Fn+F8 (or ctrl+alt+F4) to cycle through the settings (laptop display only/laptop display plus external display/external display only). Reboot the laptop.
    5. Go to Start>Control Panel>Sound>Playback tab. Make "HDMI" the default device. (If "HDMI" is not there, right click in the white area and look under "Show Disconnected Devices" or "Show Disabled Devices" and see if it is there.)
    Post Connection Problems:
    1. If there is still no option to select "HDMI' as the default audio playback device, try re-installing or updating the graphics driver, or even try an older version. The graphics driver is the driver for HDMI audio, not the regular audio driver. A few people with Intel graphics had better results by uninstalling the graphics driver, rebooting, and letting Windows look for a driver (instead of downloading the driver from the Dell support site).
    2. Try disconnecting and then reconnecting the HDMI cable.
    3. If you are using Windows Media Player or Windows Media Center but get no HDMI audio even after it is selected as the default playback device, go to
    Control Panel>Sound>Playback tab>Audio/Playback device>HDMI>properties>Advance>Exclusive Mode and uncheck "exclusive mode".
    4. Try a different HDMI cable.
    5. Try a different HDMI port on the TV.
    Source: Dell forum
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Add an HDMI driver to a Pavilion dv9000 using Windows XP

    How can I add an HDMI driver to a Pavilion dv9000 using Windows XP? I've used an HDMI cable from laptop to Sony tv and getting great video but no audio.

    Hi:
    What video adapter do you have in your notebook?  AMD or nVidia?
    If you have an AMD video chip, download and install the Realtek HDMI audio driver for AMD.
    Accept the agreement, download and install the 8th file on the list.
    http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownT...
    If you have an nVidia GPU, try this one:
    http://www.nvidia.com/object/hdmi_audio_xp_vista_win7_1.00.00.59.html
    or this one:
    http://www.nvidia.com/object/nforce_hdmi_audio_winxp_10.3.0.23.html
    Paul

  • Dead screen, laptop locked in Safe Mode with no HDMI driver for external monitor

    Hi,
    Background: This is a Windows 8 pre-loaded notebook, I have updated to 8.1 (some months ago) via the Store.
    I recently had the dead screen that appears quite common with HP notebooks.
    I connected an external monitor, notebook was fully functional.
    Backed up all contents, then updated graphics driver, no improvement.
    Then went into msconfig and forced boot into safe mode...
    Now, I cannot control the notebook at all because I can't see anything.  At this point I am just trying to get control of the notebook so I can wipe it, and sell it to a repair place, or as a notebook that works fine with a docking station or external monitor.
    Questions I have:
    1. WITHOUT SEEING THE SCREEN (dead) is there any way to get it to boot back to Windows Normal mode, or any other HDMI-driver enabled mode?  
    2. As an alternative is there any way I can get it to boot from a USB to any operating system so I can wipe the HDD and start again?
    3. Would (2) even work if I need a HDMI driver to operate the notebook - would it be possible to reinstall an OS with a dead screen, because I would need to be able to run an external monitor?
    4. How do I find my Windows Product Key without access to the notebook (can HP help here, from my notebook serial #)?
    5. Any way to perhaps mount the HDD externally in order to manually edit the boot config to return it to Windows Normal booting?
    Grateful for your comments.  Remember my objective is NOT TO FIX IT, just to get it to drive an external monitor again so I can part with this notebook with some kind of financial return.
    Dom

    Hi @Dom_Oz ,
    Welcome to the HP Forums!
    It is a terrific place to find answers.
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    I see that your display quit and you connected an external monitor and it was functioning well.  You backed up all your data and updated graphic drivers but there was no improvement.  You booted into safe mode and now both screens are blank.
    Since both screens are blank when you booted into safe mode, I would try a Performing a Hard Reset or Forced Reset.
    to try and bring back the external monitor.
    If that does not work, can could try to do a recovery Performing an HP System Recovery (Windows 8) 
    The Windows product key is tattooed in the bios and is hidden, but if you do a recovery it should automatically get picked up.
    Yes you can try booting to an OS on a USB stick to wipe the hard drive.
    Yes you can remove the hard drive and install it in an external case and then edit as you wish or format  from there.
    If you edit the boot config and manage to have Windows reboot, I would do a factory recovery, this will  format the drive and return back to its original condition.
    I hope this helps.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Reinstall win 7, VGA and HDMI driver

    Hi everyone,
    2 problems
    1.I treid to reformat my hp probook 4320s and reinstall windows back to factory settings. I made a recovery disk when i first got it (at least im sure i did) and when i try to boot it says windows is loading files, i see the white bar accross the bottom moving along until 2/3rd of the way then it stops. Ive left it for 8 hours this way and it remains frozen. did i not create the disk properly?
    2. So instead i had a spare win 7 and reinstalled using that, i suspect the VGA and HDMI drivers are missing or something because now when i connect an external monitor via these 2 ports nothing comes up whereas it did before i reinstalled.
    Does anyone know which specific drivers i need? I looked on the support page but iv eno idea which one i need.

    Hi:
    Since your model can have either the Intel or AMD/Intel switchable graphics, there is no way of telling without some additional information.
    Go to the device manager and click to expand the Display Adapters category.
    When the graphics drivers are not installed, you will see a device labeled Standard VGA Adapter.
    If you see one listing of a Standard VGA adapter, then install the Intel HD graphics driver.
    If you see two listings of a Standard VGA adapter, then install the AMD graphics driver.
    The AMD graphics driver will install the drivers for both the AMD and Intel switchable graphics processors.
    As far as the recovery disk not working, it is anyone's guess as to why.
    You can order a set of recovery disks by contacting HP for the country you live in at the link below.
    http://www8.hp.com/us/en/contact-hp/ww-contact-us.html

  • HDMI Driver Missing/Cannot install HDMI Control Manager

    I have a satellite M645-S4070 with OS Windows 7 (64bit). My HDMI port recently stopped working, first the sound now the display altogether, in an attempt to locate it in device manager it appears to be missing. I assumed I could reinstall the driver for it, but only found the HDMI Control Manager download; hoping that would help I attempted to install it and it starts up, then shuts down immediately. I am not sure if I am even attacking the problem correctly, but if anybody has had a similar problem and may know what is going on any suggestions would be very much appreciated. Please do not tell me after my warranty, literally, just expired that the HDMI port has failed me...
    Side Note: The HDMI cable does in fact work

    I have done 2 system reinstalls. Both times the first time I tried the HDMI port worked great! The 2nd time I attempted to use it, it did not work once again. I have gone and tried to right click repair on the HDMI control manager and it tells me I cannot fix something that is not instlled... So, I attempted to right click run as admin and it tells me ***IS_STRING_NOT_DEFINED***. I have no clue what this means, but I assume it has something to do with the install shield not working properly. I can't see this as a hardware malfunction considering it works and then it doesn't.

  • How To Disable ATI HDMI DRIVER ?

    Recently, I installed My HD 6570 on my Machine 
    i installed a display driver , since then there is no sound in my computer Even My Onboard Sound Card Is Dissappeared From PLayback Devices At Control panel.How To Get Rid of it , i want to Revert Back to my Onboard Realtek HD SOund , 
    PC: HP PAVILLION a1657c 

    Hi,
    Try the following.
    Shut down the PC.
    Enter the Bios Menu by tapping away at f10 as soon as you start the PC - ( if the PC just loads into Windows, repeat the procedure but try tapping f1 ).
    Look for the option Onboard Audio and set this to enabled.
    Save the change before exiting the bios menu and when Windows has loaded, check in Device Manager to see if the Realtek audio chip is now listed.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Portege M800-105 - HDMI output driver for XP?

    Hi,
    I've got a question wich belongs to the HDMI output.
    I have put Windows XP Home on my Portege with all driver from the Toshiba support page but my HDMI out does not works.
    Now I've seen that there is a driver for Windows Vista called Toshiba HDMI Output.
    Does anybody knows a driver called like this for Windows XP?
    Or has anyone the same problem working with XP but the HDMI output does not works?
    I hope someone can help me with this problem.
    thx
    dschumacher

    Hi
    As far as I know this is a Intel High Definition Audio HDMI driver.
    Im not a M800 owner but Ive got a U400 Satellite with HDMI output and installed XP.
    To be honest I didnt notice any yellow exclamation marks in my device manager but I installed the Intel High Definition Audio HDMI driver from the Intel page
    http://www.intel.com/support/chipsets/sb/CS-009244.htm
    Maybe this site will help you
    But note; some notebook features are not available in Win XP but only running Vista!

  • NO Audio HDMI on HP 17-j001eb with Windows 8.1 Pro to Sony Bravia KDL-40W5500

    Hi, 
    When I connect my pc for watching movies on my tv, I have no audio.
    This is my setup: 
    I've a Sony Bravia KDL-40W5500. He is connected  to my Sony Multichannel AV Reveiver (output) (All my hardware -> decoder, BD player, ... Are conntected with the receiver (input). There is just one HDMI cable to my TV.
    Receiver backside:
    Problem:
    When I conntect my PC ( HP 17-j001eb ) with HMI  on the receiver (Sony STR-DH500) input (Exampel DVD or, SAT, or whatever ...). I select hdmi as a default output and I play a movie ( extention-> .mkv), there is video on the tv but no sound. I search on this forum en I try many solution but The problem is staying .
    I play the movies with Cyberlink Power DVD.
    I select my output on my pc to HDMI as default (my pc is in Dutch):
    In power DVD  is the audio HDMi as default selected.
    I run Windwos 8.1 PRO.
    What do I wrong?
    Is there anybody who can help me?
    Thanks in advance!
    R.

    @RW4HP ,
    Hello and thank you for posting on the HP support forums.  Lets see if we can get your sound issue resolved here.
    First thing we will want to do is break down each step in the chain of components.
    First thing you will want to try is to connect directly to the display with your notebook and try to play the movie.
    If no sound go to the next HDMI input on the Display.  NOT THE SONY.  If no sound from each of the input ports on the Display.  Change the HDMI cable.  
    Repeat the first steps.
    Now if that fails try another DVD.  If you are still having a no sound issue try a new media player.
    Switch up to VLC media player.  The only reason I suggest this one is due to the fact that is a free player and is loaded full of codecs that support almost anything.
    VLC Media Player
    If this fails to do the job then we shall move on to the removal of the drivers.
    Now when you go to uninstall the HDMI driver you will want to do this from safe mode.  This will make sure no other drivers or software are live to make a mess of the removal.
    Before you remove the drivers though you will want to download the drivers that are the only supported drivers for your system from this link.
    HP ENVY 17-j001eb Notebook PC Drivers
    Now boot into safe mode and remove the HDMI drivers and the Graphics and Sound drivers.
    Windows 8 Safe Mode
    Once you have done all this the next thing is to follow the steps for troubleshooting HDMI.
    Here are some links.
    Connecting a Monitor, Projector or TV (Windows 8)
    This next link resolved an issue with no sound when updating to windows 8.1.
    HDMI output not working after Windows 8.1 update
    Troubleshooting HDMI display and sound issues
    Let me know how things go.
    Thank you again for posting and have a great day.
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    D5GR
    I work on behalf of HP

  • My satellite L675D-S7015 all of a sudden, no sound from HDMI

    I have a satellite L675D-S7015.  It came with HDMI out, blu-ray player and all the bells and whistles. Up till a week ago the only thing I had to do to it was replace the screen after my friends kid broke it. But last week, I lost all sound to my receive. Now I have checked everything I can...made sure it was set to default....in the sound icon and by going through the realtek HD audio mgr. Made sure nothing was muted and all that good stuff. I then went into my device mgr...only to see that my ati HD HDMI driver had been replaced by some generic HDMI sound driver. I've uninstalled this several times and reinstalled the Realtek driver...only to have it replaced again.  Is there a way to stop this?  or what do i need to do to fix it?  the generic HMDI driver will play sound, but I have no control over its settings it seems.  And also...I thought that HDMI was more than just stereo?  but the realtek HDMI settings, even when I have the box checked for it to allow true dolby d and dts, it doesnt give me any other optin in setup other than a stereo one?  am I missing something?

    I found this on the Microsoft websiite. (I am assuming you are running a Windows 7 machine)
    Windows 7 auto update overwriting Realtek audio drivers on startup in Windows 7
    And here is another thread in our forums stating the same issue.
    Realtek Sound Drivers keep getting replaced by generic sound drives causing no sound
    Here are a couple TOSHIBA KB articles for troubleshooting No Sound issues:
    No sound from speakers or headphones
    Windows Vista / 7 - Troubleshoot no sound with Windows Audio Troubleshooter

  • Thunderbolt Port & HDMI

    Does the Mini have a seperate HDMI or Display port in addition to the Thunnderbolt port?
    Here is my dilema:
    I need to use an analog VGA display - no problem as there is an adaptor for that?
    I also need the Thunderbolt port to connect to a device, a BlackMagic video product.
    Can both of these devices be connected to a MAC mini and used at the same time?

    There is a KNOWN issue with the HDMI driver supplied by Intel.
    They have shipped Apple the fix and we should see it in the next version of OS X Mountain Lion 10.8.3.
    http://reviews.cnet.com/8301-13727_7-57556171-263/flickering-mac-minis-to-get-a- fix/
    Kind regards,
    Ed

  • Mediasmart dvd 3.0 broken HDMI passthrough in windows 7; solution found

    Hello everyone,
    I have a dv6-1253cl and was successfully bitstreaming 5.1 DD to my Onkyo TX-SR606 receiver from blu-rays in mediasmart dvd under vista home premium 64.  This did not work initially under vista.  This laptop has an ati mobility 4650 graphics card, but the default microsoft hd audio driver would not configure for surround sound or streaming dts or DD under "manage audio devices" in the control panel.  Installing the realtek ati hdmi driver fixed this problem.  I then followed hd1's instructions, setting mediasmart dvd's audio option to "hdmi passthrough"  before inserting the blu ray.  (http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio/HDMI-sound-issue-from-newer-Blu-Ray-s/m-p/1...)
    Unfortunately, when upgrading to windows 7, this stopped working.  mediasmart dvd 3.0E would only send 2-channel pcm to the receiver, or it would simply freeze and crash.  Reinstalling the sound card drivers did not fix the problem.
    I have determined that this is a problem with mediasmart dvd 3.0 for windows 7.   I uninstalled 3.0, and reinstalled mediasmart dvd 2.2 for vista 64, and everything worked again!  
    So the major lesson is, if you upgraded to windows 7, use mediasmart 2.2 for vista if you want surround sound.
    I'd appreciate any feedback if anybody else has had this problem, and if this solution works for anybody else.
    JoMP

    This answer is @ JoMP82
     Everything on the laptop is configured correctly, it even shows that there are 7 channels of sound available on the Denon receiver or 5 if you like, it makes no difference. The only thing that has changed is the Media Smart software. I either have to revert back to the version that worked and not play Ice Age 3 or keep the old version and let SlySoft remove all the copy protection and region code; and then it will play. This is what I wrote on the CyberLink web forums :
    After reading the hundreds of people having problems playing Blu-ray discs on their laptops, including myself, it was easier to cut my losses and give up. At present I am using Media Smart which is a cheap version of a CyberLink product and since the latest update I have no more surround sound in my home theatre. I only use my laptop to play region "B" blu-ray's. I rolled back to the previous version and it works fine. I also have Slysoft and that helps a lot in removing the region codes and all that frustrating protection crap !
    So here's a revelation. Stop using your laptop's to play blu-ray movies. The cost of the Cyberlink software is a around 100.00 bucks. I just bought a cheap Sony player for that cost (BDPS360) and it plays everything. The cost alone for my time trouble shooting is already in the hundred's of dollars.
    Did it ever occur to anybody that this is being done on purpose because the studios don't want people playing their precious blu-rays on laptop's because they are too easily copied on them. I have done it and as the cost of 50 gig discs fall it will make it more cost effective to do this.
    It is also in Cyberlink's best interest not to find any solution to your problems when they can charge 30 dollars for useless phone support etc.
    Why find a cure for cancer when the industry is making billions perpetuating the disease !
    If you must watch a movie on your laptop just use a DVD. Most screens are only 15 inches big diagonally and a regular DVD will look just fine. The biggest is 18 inches and it still looks OK. And yes it pisses me off too that My blu-ray player in my laptop is so problematic, but I have had enough !! CyberLink, Hewlett Packard and the Hollywood studios can go to hell !!
     This is harsh stuff, but after spending a little over 2700.00$ it should bloody well work and work properly !  It's incompetence, I am a very patient person, but things like this are intolerable.
     Maybe one of the moderators will remove this. I will see what happens.

  • [SOLVED] no hdmi sound (Radeon HD 7700/7800 Series)

    Pulseaudio detects the sound card, and paplay gives sound but totem or youtube movies doesn't give any sound. Gnome sound volume test gives sound though. What should I do to fix the hdmi sound?
    'pactl list sinks' shows:
    Sink #0
    State: RUNNING
    Name: alsa_output.pci-0000_07_00.1.hdmi-stereo
    Description: Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series] Digital Stereo (HDMI)
    Driver: module-alsa-card.c
    Sample Specification: s16le 2ch 44100Hz
    Channel Map: front-left,front-right
    Owner Module: 6
    Mute: no
    Volume: front-left: 43861 / 67% / -10.46 dB, front-right: 43861 / 67% / -10.46 dB
    balance 0.00
    Base Volume: 65536 / 100% / 0.00 dB
    Monitor Source: alsa_output.pci-0000_07_00.1.hdmi-stereo.monitor
    Latency: 1182766 usec, configured 1999818 usec
    Flags: HARDWARE DECIBEL_VOLUME LATENCY SET_FORMATS
    Properties:
    alsa.resolution_bits = "16"
    device.api = "alsa"
    device.class = "sound"
    alsa.class = "generic"
    alsa.subclass = "generic-mix"
    alsa.name = "HDMI 0"
    alsa.id = "HDMI 0"
    alsa.subdevice = "0"
    alsa.subdevice_name = "subdevice #0"
    alsa.device = "3"
    alsa.card = "1"
    alsa.card_name = "HDA ATI HDMI"
    alsa.long_card_name = "HDA ATI HDMI at 0xfe760000 irq 58"
    alsa.driver_name = "snd_hda_intel"
    device.bus_path = "pci-0000:07:00.1"
    sysfs.path = "/devices/pci0000:00/0000:00:0d.0/0000:07:00.1/sound/card1"
    device.bus = "pci"
    device.vendor.id = "1002"
    device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
    device.product.id = "aab0"
    device.product.name = "Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]"
    device.string = "hdmi:1"
    device.buffering.buffer_size = "352768"
    device.buffering.fragment_size = "176384"
    device.access_mode = "mmap+timer"
    device.profile.name = "hdmi-stereo"
    device.profile.description = "Digital Stereo (HDMI)"
    device.description = "Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series] Digital Stereo (HDMI)"
    alsa.mixer_name = "ATI R6xx HDMI"
    alsa.components = "HDA:1002aa01,00aa0100,00100300"
    module-udev-detect.discovered = "1"
    device.icon_name = "audio-card-pci"
    Ports:
    hdmi-output-0: HDMI / DisplayPort (priority: 5900, available)
    Active Port: hdmi-output-0
    Formats:
    pcm
    Sink #1
    State: SUSPENDED
    Name: alsa_output.pci-0000_00_14.2.analog-stereo
    Description: Built-in Audio Analog Stereo
    Driver: module-alsa-card.c
    Sample Specification: s16le 2ch 44100Hz
    Channel Map: front-left,front-right
    Owner Module: 7
    Mute: no
    Volume: front-left: 50112 / 76% / -6.99 dB, front-right: 50112 / 76% / -6.99 dB
    balance 0.00
    Base Volume: 65536 / 100% / 0.00 dB
    Monitor Source: alsa_output.pci-0000_00_14.2.analog-stereo.monitor
    Latency: 0 usec, configured 0 usec
    Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
    Properties:
    alsa.resolution_bits = "16"
    device.api = "alsa"
    device.class = "sound"
    alsa.class = "generic"
    alsa.subclass = "generic-mix"
    alsa.name = "ALC892 Analog"
    alsa.id = "ALC892 Analog"
    alsa.subdevice = "0"
    alsa.subdevice_name = "subdevice #0"
    alsa.device = "0"
    alsa.card = "0"
    alsa.card_name = "HDA ATI SB"
    alsa.long_card_name = "HDA ATI SB at 0xfeb00000 irq 16"
    alsa.driver_name = "snd_hda_intel"
    device.bus_path = "pci-0000:00:14.2"
    sysfs.path = "/devices/pci0000:00/0000:00:14.2/sound/card0"
    device.bus = "pci"
    device.vendor.id = "1002"
    device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
    device.product.id = "4383"
    device.product.name = "SBx00 Azalia (Intel HDA)"
    device.form_factor = "internal"
    device.string = "front:0"
    device.buffering.buffer_size = "352768"
    device.buffering.fragment_size = "176384"
    device.access_mode = "mmap+timer"
    device.profile.name = "analog-stereo"
    device.profile.description = "Analog Stereo"
    device.description = "Built-in Audio Analog Stereo"
    alsa.mixer_name = "Realtek ALC892"
    alsa.components = "HDA:10ec0892,10438436,00100302"
    module-udev-detect.discovered = "1"
    device.icon_name = "audio-card-pci"
    Ports:
    analog-output-lineout: Line Out (priority: 9900, not available)
    analog-output-headphones: Headphones (priority: 9000, not available)
    Active Port: analog-output-lineout
    Formats:
    pcm
    'pactl list short sinks' shows:
    0 alsa_output.pci-0000_07_00.1.hdmi-stereo module-alsa-card.c s16le 2ch 44100Hz SUSPENDED
    1 alsa_output.pci-0000_00_14.2.analog-stereo module-alsa-card.c s16le 2ch 44100Hz SUSPENDED
    I've already tried to comment "load-module module-suspend-on-idle" in /etc/pulse/default.pa file, but it shows idle instead of suspended. Anyone have any idea what might be wrong with the pulseaudio?
    Last edited by ahcaliskan (2015-05-19 15:45:53)

    Sound still not working. Here is the pulseaudio output:
    I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
    D: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
    D: [pulseaudio] core-util.c: setpriority() worked.
    I: [pulseaudio] core-util.c: Successfully acquired nice level -10, which is lower than the requested -11.
    I: [pulseaudio] main.c: This is PulseAudio 6.0
    D: [pulseaudio] main.c: Compilation host: x86_64-unknown-linux-gnu
    D: [pulseaudio] main.c: Compilation CFLAGS: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector-strong --param=ssp-buffer-size=4 -Wall -W -Wextra -Wno-long-long -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -ffast-math -fno-common -fdiagnostics-show-option -fdiagnostics-color=auto
    D: [pulseaudio] main.c: Running on host: Linux x86_64 4.0.3 #1 SMP PREEMPT Thu May 14 08:58:24 UTC 2015
    D: [pulseaudio] main.c: Found 8 CPUs.
    I: [pulseaudio] main.c: Page size is 4096 bytes
    D: [pulseaudio] main.c: Compiled with Valgrind support: no
    D: [pulseaudio] main.c: Running in valgrind mode: no
    D: [pulseaudio] main.c: Running in VM: no
    D: [pulseaudio] main.c: Optimized build: yes
    D: [pulseaudio] main.c: FASTPATH defined, only fast path asserts disabled.
    I: [pulseaudio] main.c: Machine ID is 95303e48bec149d190471b0a51ab134e.
    I: [pulseaudio] main.c: Session ID is c2.
    I: [pulseaudio] main.c: Using runtime directory /run/user/1000/pulse.
    I: [pulseaudio] main.c: Using state directory /home/ahc/.config/pulse.
    I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-6.0/modules.
    I: [pulseaudio] main.c: Running in system mode: no
    I: [pulseaudio] main.c: Fresh high-resolution timers available! Bon appetit!
    D: [pulseaudio] memblock.c: Using shared memory pool with 1024 slots of size 64.0 KiB each, total size is 64.0 MiB, maximum usable slot size is 65472
    D: [pulseaudio] memblock.c: Using shared memory pool with 1024 slots of size 64.0 KiB each, total size is 64.0 MiB, maximum usable slot size is 65472
    I: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1 SSE4_2 MMXEXT
    I: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
    I: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
    I: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
    I: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
    I: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
    I: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
    D: [pulseaudio] database-gdbm.c: Opened GDBM database '/home/ahc/.config/pulse/95303e48bec149d190471b0a51ab134e-device-volumes.x86_64-unknown-linux-gnu.gdbm'
    I: [pulseaudio] module-device-restore.c: Successfully opened database file '/home/ahc/.config/pulse/95303e48bec149d190471b0a51ab134e-device-volumes'.
    I: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
    D: [pulseaudio] database-gdbm.c: Opened GDBM database '/home/ahc/.config/pulse/95303e48bec149d190471b0a51ab134e-stream-volumes.x86_64-unknown-linux-gnu.gdbm'
    I: [pulseaudio] module-stream-restore.c: Successfully opened database file '/home/ahc/.config/pulse/95303e48bec149d190471b0a51ab134e-stream-volumes'.
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1 added for object /org/pulseaudio/stream_restore1
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry0
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry1
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry2
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry3
    I: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
    D: [pulseaudio] database-gdbm.c: Opened GDBM database '/home/ahc/.config/pulse/95303e48bec149d190471b0a51ab134e-card-database.x86_64-unknown-linux-gnu.gdbm'
    I: [pulseaudio] module-card-restore.c: Successfully opened database file '/home/ahc/.config/pulse/95303e48bec149d190471b0a51ab134e-card-database'.
    I: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
    I: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
    I: [pulseaudio] module.c: Loaded "module-switch-on-port-available" (index: #4; argument: "").
    D: [pulseaudio] alsa-util.c: Trying hw:1,3 with SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open hw:1,3
    I: [pulseaudio] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
    D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 23777 ms
    D: [pulseaudio] alsa-util.c: Set buffer size first (to 88200 samples), period size second (to 88200 samples).
    I: [pulseaudio] alsa-util.c: ALSA period wakeups disabled
    I: [pulseaudio] alsa-sink.c: Successfully opened device hw:1,3.
    I: [pulseaudio] alsa-sink.c: Successfully enabled mmap() mode.
    I: [pulseaudio] alsa-sink.c: Successfully enabled timer-based scheduling mode.
    D: [pulseaudio] module-device-restore.c: Database contains no data for key: sink:alsa_output.hw_1_3
    D: [pulseaudio] module-device-restore.c: Database contains no (or invalid) data for key: sink:alsa_output.hw_1_3:null
    I: [pulseaudio] sink.c: Created sink 0 "alsa_output.hw_1_3" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    I: [pulseaudio] sink.c: alsa.resolution_bits = "16"
    I: [pulseaudio] sink.c: device.api = "alsa"
    I: [pulseaudio] sink.c: device.class = "sound"
    I: [pulseaudio] sink.c: alsa.class = "generic"
    I: [pulseaudio] sink.c: alsa.subclass = "generic-mix"
    I: [pulseaudio] sink.c: alsa.name = "HDMI 0"
    I: [pulseaudio] sink.c: alsa.id = "HDMI 0"
    I: [pulseaudio] sink.c: alsa.subdevice = "0"
    I: [pulseaudio] sink.c: alsa.subdevice_name = "subdevice #0"
    I: [pulseaudio] sink.c: alsa.device = "3"
    I: [pulseaudio] sink.c: alsa.card = "1"
    I: [pulseaudio] sink.c: alsa.card_name = "HDA ATI HDMI"
    I: [pulseaudio] sink.c: alsa.long_card_name = "HDA ATI HDMI at 0xfe760000 irq 58"
    I: [pulseaudio] sink.c: alsa.driver_name = "snd_hda_intel"
    I: [pulseaudio] sink.c: device.bus_path = "pci-0000:07:00.1"
    I: [pulseaudio] sink.c: sysfs.path = "/devices/pci0000:00/0000:00:0d.0/0000:07:00.1/sound/card1"
    I: [pulseaudio] sink.c: device.bus = "pci"
    I: [pulseaudio] sink.c: device.vendor.id = "1002"
    I: [pulseaudio] sink.c: device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
    I: [pulseaudio] sink.c: device.product.id = "aab0"
    I: [pulseaudio] sink.c: device.product.name = "Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]"
    I: [pulseaudio] sink.c: device.string = "hw:1,3"
    I: [pulseaudio] sink.c: device.buffering.buffer_size = "352768"
    I: [pulseaudio] sink.c: device.buffering.fragment_size = "176384"
    I: [pulseaudio] sink.c: device.access_mode = "mmap+timer"
    I: [pulseaudio] sink.c: device.description = "Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]"
    I: [pulseaudio] sink.c: device.icon_name = "audio-card-pci"
    D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
    D: [pulseaudio] module-device-restore.c: Database contains no data for key: source:alsa_output.hw_1_3.monitor
    D: [pulseaudio] module-device-restore.c: Database contains no (or invalid) data for key: source:alsa_output.hw_1_3.monitor:null
    I: [pulseaudio] source.c: Created source 0 "alsa_output.hw_1_3.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    I: [pulseaudio] source.c: device.description = "Monitor of Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]"
    I: [pulseaudio] source.c: device.class = "monitor"
    I: [pulseaudio] source.c: device.icon_name = "audio-input-microphone"
    I: [pulseaudio] alsa-sink.c: Using 2.0 fragments of size 176384 bytes (999.91ms), buffer size is 352768 bytes (1999.82ms)
    I: [pulseaudio] alsa-sink.c: Time scheduling watermark is 20.00ms
    D: [pulseaudio] alsa-sink.c: hwbuf_unused=0
    D: [pulseaudio] alsa-sink.c: setting avail_min=87310
    D: [pulseaudio] alsa-util.c: snd_pcm_dump():
    D: [pulseaudio] alsa-util.c: Hardware PCM card 1 'HDA ATI HDMI' device 3 subdevice 0
    D: [pulseaudio] alsa-util.c: Its setup is:
    D: [pulseaudio] alsa-util.c: stream : PLAYBACK
    D: [pulseaudio] alsa-util.c: access : MMAP_INTERLEAVED
    D: [pulseaudio] alsa-util.c: format : S16_LE
    D: [pulseaudio] alsa-util.c: subformat : STD
    D: [pulseaudio] alsa-util.c: channels : 2
    D: [pulseaudio] alsa-util.c: rate : 44100
    D: [pulseaudio] alsa-util.c: exact rate : 44100 (44100/1)
    D: [pulseaudio] alsa-util.c: msbits : 16
    D: [pulseaudio] alsa-util.c: buffer_size : 88192
    D: [pulseaudio] alsa-util.c: period_size : 44096
    D: [pulseaudio] alsa-util.c: period_time : 999909
    D: [pulseaudio] alsa-util.c: tstamp_mode : ENABLE
    D: [pulseaudio] alsa-util.c: tstamp_type : MONOTONIC
    D: [pulseaudio] alsa-util.c: period_step : 1
    D: [pulseaudio] alsa-util.c: avail_min : 87310
    D: [pulseaudio] alsa-util.c: period_event : 0
    D: [pulseaudio] alsa-util.c: start_threshold : -1
    D: [pulseaudio] alsa-util.c: stop_threshold : 6205960286516543488
    D: [pulseaudio] alsa-util.c: silence_threshold: 0
    D: [pulseaudio] alsa-util.c: silence_size : 0
    D: [pulseaudio] alsa-util.c: boundary : 6205960286516543488
    D: [pulseaudio] alsa-util.c: appl_ptr : 0
    D: [pulseaudio] alsa-util.c: hw_ptr : 0
    D: [alsa-sink-HDMI 0] alsa-sink.c: Thread starting up
    D: [alsa-sink-HDMI 0] core-util.c: SCHED_RR|SCHED_RESET_ON_FORK worked.
    I: [alsa-sink-HDMI 0] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
    I: [alsa-sink-HDMI 0] alsa-sink.c: Starting playback.
    D: [alsa-sink-HDMI 0] alsa-sink.c: Cutting sleep time for the initial iterations by half.
    D: [alsa-sink-HDMI 0] alsa-sink.c: Cutting sleep time for the initial iterations by half.
    D: [pulseaudio] module-device-restore.c: Database contains no (or invalid) data for key: sink:alsa_output.hw_1_3:null
    I: [pulseaudio] module.c: Loaded "module-alsa-sink" (index: #5; argument: "device=hw:1,3").
    D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-6.0/modules/module-udev-detect.so': success
    D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC1 is accessible: yes
    D: [pulseaudio] module-udev-detect.c: /devices/pci0000:00/0000:00:0d.0/0000:07:00.1/sound/card1 is busy: yes
    D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
    D: [pulseaudio] module-udev-detect.c: /devices/pci0000:00/0000:00:14.2/sound/card0 is busy: no
    D: [pulseaudio] module-udev-detect.c: Loading module-alsa-card with arguments 'device_id="0" name="pci-0000_00_14.2" card_name="alsa_card.pci-0000_00_14.2" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"'
    D: [pulseaudio] dbus-util.c: Successfully connected to D-Bus session bus 927ea15335ea5cfa45d57cb0555b4740 as :1.28
    D: [pulseaudio] reserve-wrap.c: Successfully acquired reservation lock on device 'Audio0'
    I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm/HDA ATI SB/HDA ATI SB.conf
    I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card HDA ATI SB
    I: [pulseaudio] (alsa-lib)main.c: error: failed to import HDA ATI SB use case configuration -2
    I: [pulseaudio] alsa-ucm.c: UCM not available for card HDA ATI SB
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/profile-sets/default.conf'
    D: [pulseaudio] alsa-mixer.c: Looking at profile input:analog-mono
    D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog Mono (analog-mono)
    D: [pulseaudio] alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open hw:0
    D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: [pulseaudio] alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open hw:0
    D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: [pulseaudio] alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open plug:hw:0
    D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: [pulseaudio] alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open plug:hw:0
    D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
    D: [pulseaudio] alsa-mixer.c: Caching failure to open input:analog-mono
    D: [pulseaudio] alsa-mixer.c: Looking at profile input:analog-stereo
    D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog Stereo (analog-stereo)
    D: [pulseaudio] alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open front:0
    D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 23777 ms
    D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples).
    D: [pulseaudio] alsa-mixer.c: Profile input:analog-stereo supported.
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-front-mic.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-rear-mic.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-internal-mic.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-dock-mic.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-linein.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-aux.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-video.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-tvtuner.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-fm.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic-line.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-headphone-mic.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-headset-mic.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:0
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:0: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-front-mic'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Mic Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Mic Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=1, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-rear-mic'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Rear Mic Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Rear Mic Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=1, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-internal-mic'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Mic Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Dock Mic Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Mic Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Rear Mic Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Internal Mic Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Int Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Int Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-internal-mic', none of required-any elements preset.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-dock-mic'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Dock Mic Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Dock Mic Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-dock-mic', none of required-any elements preset.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input'
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' failed.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-mic'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Mic Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Mic Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Select' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost (+20dB)' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-mic', none of required-any elements preset.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-linein'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=1, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-aux'
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' failed.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-video'
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' failed.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-tvtuner'
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' failed.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-fm'
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' failed.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-mic-line'
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' failed.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-headphone-mic'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Mic Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Auto-Mute Mode' succeeded (volume=0, switch=0, enumeration=1).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-headphone-mic', none of required-any elements preset.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-headset-mic'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headset Mic Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headset Mic Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Mic Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headset Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headset Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headset' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-headset-mic', none of required-any elements preset.
    D: [pulseaudio] alsa-mixer.c: Available mixer paths (after tidying):
    D: [pulseaudio] alsa-mixer.c: Path Set 0x1134570, direction=2
    D: [pulseaudio] alsa-mixer.c: Path analog-input-front-mic (Front Microphone), direction=2, priority=85, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=46, min_dB=-16, max_dB=60
    D: [pulseaudio] alsa-mixer.c: Element Capture, direction=2, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
    D: [pulseaudio] alsa-mixer.c: Element Front Mic Boost, direction=2, switch=0, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=4, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
    D: [pulseaudio] alsa-mixer.c: Element Input Source, direction=2, switch=0, volume=0, volume_limit=-1, enumeration=1, required=0, required_any=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
    D: [pulseaudio] alsa-mixer.c: Option Front Mic (analog-input-microphone-front/analog-input-microphone-front) index=0, priority=0
    D: [pulseaudio] alsa-mixer.c: Element Rear Mic Boost, direction=2, switch=0, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
    D: [pulseaudio] alsa-mixer.c: Element Line Boost, direction=2, switch=0, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
    D: [pulseaudio] alsa-mixer.c: Jack Front Mic, alsa_name='Front Mic Jack', detection possible
    D: [pulseaudio] alsa-mixer.c: Jack Front Mic Phantom, alsa_name='Front Mic Phantom Jack', detection unavailable
    D: [pulseaudio] alsa-mixer.c: Setting analog-input-microphone-front (analog-input-microphone-front) priority=0
    D: [pulseaudio] alsa-mixer.c: Path analog-input-rear-mic (Rear Microphone), direction=2, priority=82, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=46, min_dB=-16, max_dB=60
    D: [pulseaudio] alsa-mixer.c: Element Capture, direction=2, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
    D: [pulseaudio] alsa-mixer.c: Element Rear Mic Boost, direction=2, switch=0, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=4, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
    D: [pulseaudio] alsa-mixer.c: Element Input Source, direction=2, switch=0, volume=0, volume_limit=-1, enumeration=1, required=0, required_any=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
    D: [pulseaudio] alsa-mixer.c: Option Rear Mic (analog-input-microphone-rear/analog-input-microphone-rear) index=1, priority=0
    D: [pulseaudio] alsa-mixer.c: Element Front Mic Boost, direction=2, switch=0, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
    D: [pulseaudio] alsa-mixer.c: Element Line Boost, direction=2, switch=0, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
    D: [pulseaudio] alsa-mixer.c: Jack Rear Mic, alsa_name='Rear Mic Jack', detection possible
    D: [pulseaudio] alsa-mixer.c: Jack Rear Mic Phantom, alsa_name='Rear Mic Phantom Jack', detection unavailable
    D: [pulseaudio] alsa-mixer.c: Setting analog-input-microphone-rear (analog-input-microphone-rear) priority=0
    D: [pulseaudio] alsa-mixer.c: Path analog-input-linein (Line In), direction=2, priority=81, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=46, min_dB=-16, max_dB=60
    D: [pulseaudio] alsa-mixer.c: Element Capture, direction=2, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
    D: [pulseaudio] alsa-mixer.c: Element Line Boost, direction=2, switch=0, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=4, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
    D: [pulseaudio] alsa-mixer.c: Element Input Source, direction=2, switch=0, volume=0, volume_limit=-1, enumeration=1, required=0, required_any=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
    D: [pulseaudio] alsa-mixer.c: Option Line (analog-input-linein/analog-input-linein) index=2, priority=0
    D: [pulseaudio] alsa-mixer.c: Element Front Mic Boost, direction=2, switch=0, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
    D: [pulseaudio] alsa-mixer.c: Element Rear Mic Boost, direction=2, switch=0, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
    D: [pulseaudio] alsa-mixer.c: Jack Line, alsa_name='Line Jack', detection possible
    D: [pulseaudio] alsa-mixer.c: Jack Line Phantom, alsa_name='Line Phantom Jack', detection unavailable
    D: [pulseaudio] alsa-mixer.c: Setting analog-input-linein (analog-input-linein) priority=0
    D: [pulseaudio] alsa-mixer.c: Looking at profile input:iec958-stereo
    D: [pulseaudio] alsa-mixer.c: Checking for recording on Digital Stereo (IEC958) (iec958-stereo)
    D: [pulseaudio] alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:0: No such file or directory
    D: [pulseaudio] alsa-mixer.c: Caching failure to open input:iec958-stereo
    D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-mono
    D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Mono (analog-mono)
    D: [pulseaudio] alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open hw:0
    D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: [pulseaudio] alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open hw:0
    D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: [pulseaudio] alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open plug:hw:0
    D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: [pulseaudio] alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open plug:hw:0
    D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
    D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-mono
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-mono+input:analog-mono - will not be able to open output:analog-mono
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-mono+input:analog-stereo - will not be able to open output:analog-mono
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-mono+input:iec958-stereo - will not be able to open output:analog-mono
    D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-stereo
    D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Stereo (analog-stereo)
    D: [pulseaudio] alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open front:0
    D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 23777 ms
    D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples).
    D: [pulseaudio] alsa-mixer.c: Profile output:analog-stereo supported.
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-output-lineout.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-output-speaker.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-output-headphones.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-output-headphones-2.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf.common'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:0
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:0: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-output'
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Hardware Master' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Master' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Master Mono' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Surround' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Side' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Center' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'LFE' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'CLFE' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'PCM' succeeded (volume=1, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'External Amplifier' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Bass Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'IEC958' succeeded (volume=0, switch=2, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'IEC958 Optical Raw' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Analog Output' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-output-lineout'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Front Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Front Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out CLFE Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out CLFE Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Surround Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Surround Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Side Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Side Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Hardware Master' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Master' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker+LO' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone+LO' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Master Mono' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line HP Swap' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone' succeeded (volume=2, switch=2, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone2' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Desktop Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Surround' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Side' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Center' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'LFE' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'CLFE' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Bass Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker Front' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker Surround' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker Side' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker CLFE' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'PCM' succeeded (volume=1, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'External Amplifier' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Bass Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'IEC958' succeeded (volume=0, switch=2, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'IEC958 Optical Raw' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Analog Output' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-output-speaker'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Dock Headphone Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Headphone Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Front Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Speaker Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Speaker Front Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Hardware Master' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Master' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Master Mono' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone' succeeded (volume=2, switch=2, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone2' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone+LO' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker+LO' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Desktop Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker Front' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Surround' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Surround Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker Surround' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Side' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker Side' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Center' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Center Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'LFE' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'LFE Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Bass Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'CLFE' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker CLFE' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'PCM' succeeded (volume=1, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'External Amplifier' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Bass Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'IEC958' succeeded (volume=0, switch=2, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'IEC958 Optical Raw' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Analog Output' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-output-speaker', none of required-any elements preset.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-output-headphones'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Dock Headphone Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Dock Headphone Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Headphone Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Headphone Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Mic Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Hardware Master' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Master' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Master Mono' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker+LO' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone+LO' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headset' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line HP Swap' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone2' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Desktop S

  • Win 7 HDMI Sound Gets Only 2-Channel Stereo

    My system specs (and advertising) state that it is HDCP compliant and has 8 channel sound, but Windows 7 (32-bit) reports that
    the HDMI sound is not HDCP compliant, is limited to a maximum of 2 channels and there are no supported sound Codecs (Control panel > sound > HDMI properties). 
    I ran the Cyberlink BD & 3D Advisor, and my system, including the HDMI cable, passed the HDCP test. 
    HDMI sound works with the left and right speakers but not with the center or rear speakers. 
    The HDMI sound driver is by Microsoft, even after installing the nVidia HDMI audio driver. 
    The driver for the other sound devices is by RealTek. 
    The RealTek driver reports that it supports Dolby Digital and DTS while the Windows HDMI driver supports no formats. 
    Windows, chipset drivers, sound driver and video driver are all up-to-date.
    System:
    Motherboard: Asus P5N7A-VM (chipset NVIDIA GeForce 9300/nForce 730i)
    CPU:
    Intel core 2 duo E7500
    RAM: 4GB
    PC2 6400
    Sound chip on motherboard:
    Realtek ALC1200 with 8-channel High-Definition Audio Codec
    Video chip on motherboard:
    nVidia GeForce 9300
    Tuner cards: Two
    Hauppauge HVR-2250
    HDTV: Sharp LC-42D62U
    Receiver: Pioneer
    VSX-821-K (5.1 surround sound)
    Here are the sound properties for HDMI vs. RealTek digital optical
    Thanks in advance!

    Hi,
    I am just writing to check the status of this thread. Was the information provided in previous reply helpful to you? Do you have any
    further questions or concerns? Please feel free to let us know.
    Regards,
    Alex Zhao
    TechNet Subscriber Support
    in forum
    If you have any feedback on our support, please contact
    [email protected]
    Alex Zhao
    TechNet Community Support

  • HDMI Audio - HDMI unplugged

    Having trouble getting HDMI audio to work on ATI HD7850 (Southern Islands) Graphics card. I have enabled the audio module and running kernel :3.11.4-1-ARCH #1 SMP PREEMPT Sat Oct 5 21:22:51 CEST 2013 x86_64 GNU/Linux. Using ALSA and Pulseaudio and xf86-video-ati graphics drivers.
    the hdmi out is listed in aplay but no sound is output. The device is shown as unplugged in pavucontrol despite hdmi video working correctly.  I have tried the wiki pages for troubleshooting unsuccessfully. i have tried every combination of card and device in aplay to test for output.
    Is there a way to force hdmi to be plugged in? I believe that somehow the snd_hda_intel driver is interpreting the device as unavailable and therefore not sending the audio stream out.
    Below are some relevent commands and there outputs. Thanks for any help or insights.
    aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: SB [HDA ATI SB], device 0: ALC887 Analog [ALC887 Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: SB [HDA ATI SB], device 1: ALC887 Digital [ALC887 Digital]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
    Subdevices: 0/1
    Subdevice #0: subdevice #0
    card 1: HDMI [HDA ATI HDMI], device 7: HDMI 1 [HDMI 1]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: HDMI [HDA ATI HDMI], device 8: HDMI 2 [HDMI 2]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: HDMI [HDA ATI HDMI], device 9: HDMI 3 [HDMI 3]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: HDMI [HDA ATI HDMI], device 10: HDMI 4 [HDMI 4]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: HDMI [HDA ATI HDMI], device 11: HDMI 5 [HDMI 5]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 2: Live [SB Live! Value [CT4871]], device 0: emu10k1 [ADC Capture/Standard PCM Playback]
    Subdevices: 32/32
    Subdevice #0: subdevice #0
    Subdevice #1: subdevice #1
    Subdevice #2: subdevice #2
    Subdevice #3: subdevice #3
    Subdevice #4: subdevice #4
    Subdevice #5: subdevice #5
    Subdevice #6: subdevice #6
    Subdevice #7: subdevice #7
    Subdevice #8: subdevice #8
    Subdevice #9: subdevice #9
    Subdevice #10: subdevice #10
    Subdevice #11: subdevice #11
    Subdevice #12: subdevice #12
    Subdevice #13: subdevice #13
    Subdevice #14: subdevice #14
    Subdevice #15: subdevice #15
    Subdevice #16: subdevice #16
    Subdevice #17: subdevice #17
    Subdevice #18: subdevice #18
    Subdevice #19: subdevice #19
    Subdevice #20: subdevice #20
    Subdevice #21: subdevice #21
    Subdevice #22: subdevice #22
    Subdevice #23: subdevice #23
    Subdevice #24: subdevice #24
    Subdevice #25: subdevice #25
    Subdevice #26: subdevice #26
    Subdevice #27: subdevice #27
    Subdevice #28: subdevice #28
    Subdevice #29: subdevice #29
    Subdevice #30: subdevice #30
    Subdevice #31: subdevice #31
    card 2: Live [SB Live! Value [CT4871]], device 2: emu10k1 efx [Multichannel Capture/PT Playback]
    Subdevices: 8/8
    Subdevice #0: subdevice #0
    Subdevice #1: subdevice #1
    Subdevice #2: subdevice #2
    Subdevice #3: subdevice #3
    Subdevice #4: subdevice #4
    Subdevice #5: subdevice #5
    Subdevice #6: subdevice #6
    Subdevice #7: subdevice #7
    card 2: Live [SB Live! Value [CT4871]], device 3: emu10k1 [Multichannel Playback]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 4: DACE17 [FiiO USB DAC-E17], device 0: USB Audio [USB Audio]
    Subdevices: 0/1
    Subdevice #0: subdevice #0
    card 4: DACE17 [FiiO USB DAC-E17], device 1: USB Audio [USB Audio #1]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    pactl list sinks
    ^note that the hdmi port is unavaible :  (priority: 5900, not available)
    Sink #0
    State: IDLE
    Name: alsa_output.pci-0000_01_00.1.hdmi-stereo
    Description: Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series] Digital Stereo (HDMI)
    Driver: module-alsa-card.c
    Sample Specification: s16le 2ch 44100Hz
    Channel Map: front-left,front-right
    Owner Module: 5
    Mute: no
    Volume: 0: 100% 1: 100%
    0: -0.01 dB 1: -0.01 dB
    balance 0.00
    Base Volume: 100%
    0.00 dB
    Monitor Source: alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor
    Latency: 19904 usec, configured 20000 usec
    Flags: HARDWARE DECIBEL_VOLUME LATENCY SET_FORMATS
    Properties:
    alsa.resolution_bits = "16"
    device.api = "alsa"
    device.class = "sound"
    alsa.class = "generic"
    alsa.subclass = "generic-mix"
    alsa.name = "HDMI 0"
    alsa.id = "HDMI 0"
    alsa.subdevice = "0"
    alsa.subdevice_name = "subdevice #0"
    alsa.device = "3"
    alsa.card = "1"
    alsa.card_name = "HDA ATI HDMI"
    alsa.long_card_name = "HDA ATI HDMI at 0xfdffc000 irq 43"
    alsa.driver_name = "snd_hda_intel"
    device.bus_path = "pci-0000:01:00.1"
    sysfs.path = "/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1"
    device.bus = "pci"
    device.vendor.id = "1002"
    device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
    device.product.id = "aab0"
    device.product.name = "Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]"
    device.string = "hdmi:1"
    device.buffering.buffer_size = "352768"
    device.buffering.fragment_size = "176384"
    device.access_mode = "mmap+timer"
    device.profile.name = "hdmi-stereo"
    device.profile.description = "Digital Stereo (HDMI)"
    device.description = "Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series] Digital Stereo (HDMI)"
    alsa.mixer_name = "ATI R6xx HDMI"
    alsa.components = "HDA:1002aa01,00aa0100,00100300"
    module-udev-detect.discovered = "1"
    device.icon_name = "audio-card-pci"
    Ports:
    hdmi-output-0: HDMI / DisplayPort (priority: 5900, not available)
    Active Port: hdmi-output-0
    Formats:
    pcm
    Sink #1
    State: RUNNING
    Name: alsa_output.usb-FiiO_FiiO_USB_DAC-E17-01-DACE17.iec958-stereo
    Description: FiiO USB DAC-E17 Digital Stereo (IEC958)
    Driver: module-alsa-card.c
    Sample Specification: s16le 2ch 44100Hz
    Channel Map: front-left,front-right
    Owner Module: 7
    Mute: no
    Volume: 0: 100% 1: 100%
    0: 0.00 dB 1: 0.00 dB
    balance 0.00
    Base Volume: 100%
    0.00 dB
    Monitor Source: alsa_output.usb-FiiO_FiiO_USB_DAC-E17-01-DACE17.iec958-stereo.monitor
    Latency: 23159 usec, configured 20000 usec
    Flags: HARDWARE DECIBEL_VOLUME LATENCY SET_FORMATS
    Properties:
    alsa.resolution_bits = "16"
    device.api = "alsa"
    device.class = "sound"
    alsa.class = "generic"
    alsa.subclass = "generic-mix"
    alsa.name = "USB Audio"
    alsa.id = "USB Audio"
    alsa.subdevice = "0"
    alsa.subdevice_name = "subdevice #0"
    alsa.device = "0"
    alsa.card = "4"
    alsa.card_name = "FiiO USB DAC-E17"
    alsa.long_card_name = "FiiO FiiO USB DAC-E17 at usb-0000:00:13.1-1, full speed"
    alsa.driver_name = "snd_usb_audio"
    device.bus_path = "pci-0000:00:13.1-usb-0:1:1.1"
    sysfs.path = "/devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.1/sound/card4"
    udev.id = "usb-FiiO_FiiO_USB_DAC-E17-01-DACE17"
    device.bus = "usb"
    device.vendor.id = "1852"
    device.vendor.name = "GYROCOM C&C Co., LTD"
    device.product.id = "50d0"
    device.product.name = "FiiO USB DAC-E17"
    device.serial = "FiiO_FiiO_USB_DAC-E17"
    device.string = "iec958:4"
    device.buffering.buffer_size = "352800"
    device.buffering.fragment_size = "176400"
    device.access_mode = "mmap+timer"
    device.profile.name = "iec958-stereo"
    device.profile.description = "Digital Stereo (IEC958)"
    device.description = "FiiO USB DAC-E17 Digital Stereo (IEC958)"
    alsa.mixer_name = "USB Mixer"
    alsa.components = "USB1852:50d0"
    module-udev-detect.discovered = "1"
    device.icon_name = "audio-card-usb"
    Ports:
    iec958-stereo-output: Digital Output (S/PDIF) (priority: 0)
    Active Port: iec958-stereo-output
    Formats:
    pcm
    Last edited by djmwj1 (2013-10-12 14:20:16)

    I guess I have the same problem. Switched from fglrx/catalyst yesterday. Pavucontrol shows me unplugged hdmi output.
    HD7970 (Southern Island)
    ➜ ~ lspci -v
    01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Tahiti XT [Radeon HD 7970] (prog-if 00 [VGA controller])
    Subsystem: Gigabyte Technology Co., Ltd Tahiti XT2 [Radeon HD 7970 GHz Edition OC]
    Flags: bus master, fast devsel, latency 0, IRQ 56
    Memory at e0000000 (64-bit, prefetchable) [size=256M]
    Memory at f7c00000 (64-bit, non-prefetchable) [size=256K]
    I/O ports at e000 [size=256]
    Expansion ROM at f7c40000 [disabled] [size=128K]
    Capabilities: [48] Vendor Specific Information: Len=08 <?>
    Capabilities: [50] Power Management version 3
    Capabilities: [58] Express Legacy Endpoint, MSI 00
    Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
    Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
    Capabilities: [150] Advanced Error Reporting
    Capabilities: [270] #19
    Capabilities: [2b0] Address Translation Service (ATS)
    Capabilities: [2c0] #13
    Capabilities: [2d0] #1b
    Kernel driver in use: radeon
    Kernel modules: radeon
    ➜ ~ lspci -v
    01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Tahiti XT HDMI Audio [Radeon HD 7970 Series]
    Subsystem: Gigabyte Technology Co., Ltd Device aaa0
    Flags: bus master, fast devsel, latency 0, IRQ 57
    Memory at f7c60000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: [48] Vendor Specific Information: Len=08 <?>
    Capabilities: [50] Power Management version 3
    Capabilities: [58] Express Legacy Endpoint, MSI 00
    Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
    Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
    Capabilities: [150] Advanced Error Reporting
    Kernel driver in use: snd_hda_intel
    Kernel modules: snd_hda_intel
    ➜ ~ aplay -l
    **** Liste des Périphériques Matériels PLAYBACK ****
    carte 0: PCH [HDA Intel PCH], périphérique 0: ALC898 Analog [ALC898 Analog]
    Sous-périphériques: 0/1
    Sous-périphérique #0: subdevice #0
    carte 0: PCH [HDA Intel PCH], périphérique 1: ALC898 Digital [ALC898 Digital]
    Sous-périphériques: 1/1
    Sous-périphérique #0: subdevice #0
    carte 0: PCH [HDA Intel PCH], périphérique 3: HDMI 0 [HDMI 0]
    Sous-périphériques: 1/1
    Sous-périphérique #0: subdevice #0
    carte 0: PCH [HDA Intel PCH], périphérique 7: HDMI 1 [HDMI 1]
    Sous-périphériques: 1/1
    Sous-périphérique #0: subdevice #0
    carte 1: HDMI [HDA ATI HDMI], périphérique 3: HDMI 0 [HDMI 0]
    Sous-périphériques: 0/1
    Sous-périphérique #0: subdevice #0
    carte 1: HDMI [HDA ATI HDMI], périphérique 7: HDMI 1 [HDMI 1]
    Sous-périphériques: 1/1
    Sous-périphérique #0: subdevice #0
    carte 1: HDMI [HDA ATI HDMI], périphérique 8: HDMI 2 [HDMI 2]
    Sous-périphériques: 1/1
    Sous-périphérique #0: subdevice #0
    carte 1: HDMI [HDA ATI HDMI], périphérique 9: HDMI 3 [HDMI 3]
    Sous-périphériques: 1/1
    Sous-périphérique #0: subdevice #0
    carte 1: HDMI [HDA ATI HDMI], périphérique 10: HDMI 4 [HDMI 4]
    Sous-périphériques: 1/1
    Sous-périphérique #0: subdevice #0
    carte 1: HDMI [HDA ATI HDMI], périphérique 11: HDMI 5 [HDMI 5]
    Sous-périphériques: 1/1
    Sous-périphérique #0: subdevice #0
    ➜ ~ xrandr --props
    HDMI-0 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 510mm x 287mm
    EDID:
    00ffffffffffff0015c3422301010101
    3316010380331d78ea2795a9544f9e26
    0a5054a1080081808140b30081c00101
    010101010101023a801871382d40582c
    4500fe1f1100001e000000ff00343035
    34373132320a20202020000000fd0031
    3d0f440f000a202020202020000000fc
    004653323333330a2020202020200182
    020325f14e901f051404130312021107
    160615230907078301000066030c0010
    0080e2007b011d8018711c1620582c25
    00fe1f1100009e011d80d0721c162010
    2c2580fe1f1100009e8c0ad08a20e02d
    10103e9600fe1f110000188c0ad09020
    4031200c405500fe1f11000018000000
    00000000000000000000000000000086
    underscan vborder: 0
    range: (0, 128)
    underscan hborder: 0
    range: (0, 128)
    underscan: off
    supported: off, on, auto
    coherent: 1
    range: (0, 1)
    1920x1080 60.0*+ 50.0 59.9
    1920x1080i 60.1 50.0 60.0
    1680x1050 59.9
    1280x1024 60.0
    1280x960 60.0
    1280x720 60.0 60.0 50.0 59.9
    1440x576i 50.1
    1024x768 60.0
    1440x480i 60.1 60.1
    800x600 60.3
    720x576 50.0
    720x480 60.0 59.9
    640x480 60.0 59.9
    720x400 70.1

Maybe you are looking for