Hdmi issue with lenovo g580 model (2689)

hi i have a problem with hdmi on my lenovo g580 model 2689. it seems my tv dosent pick it up but when i first setted it up it worked. it worked for a few days and then stop working. it has intel 2nd generation 2000/3000. when i uninstall the intel control panel and install it again it sometimes work but it has to be saying restart computer for it work but when i restart the computer finish installing it. the hdmi dosent work anymore. when i uninstall it now and reinstall it doesent work that way anymore and it has latest intell driver and control panel but i would like some help please how can i fix it. it had windows 8 and now i have windows 8.1 the issue was happening in windows 8 first but then i upgraded to windows 8.1

it was a software problem. i sent it of for repaire and they say it was a software problem please release an update to fix that issue.

Similar Messages

External drive issue with late 2010 model 27" imac

I'm having trouble getting a Seagate Freeagent Go 2.5" 1TB to mount with the new 27" model imacs (11,3).
At first I thought that maybe it wasn't supplying enough power but after buying an external powered hub it still won't mount.
It must be something to do with the newest model since I have an early 2010 model imac which works fine with the drive.

Hello Brett!,
A rule i usually live by when purchasing externals, is to firstly check the file format (many are factory formatted in NTFS or FAT32) and if that is the case then change them to HFS+ using disk utility. That is of course if you intend to only use it with your mac, for example i use an external formatted in FAT32 and it works on Windows and Mac.
Secondly its a good code of practice to make sure the drive spins up, as that is the easiest way to check for a dodgy powersupply.
Thirdly and hopefully finally, if those tips don't work then try mounting it on another mac or pc and see if it is detected in any form, that'll tell you if there is a connection issue.
Regards,

Issues with Lenovo A859

I have the following issues with my Lenovo A859
1. Alarm is not trigering even if the time elapsed.In order to triger the alarm i have to unlock my phone.
2. Call volume automatically decreasing while calling even if i set the volume to maximum.
3. The receiver can hear a low voice while calling and some time i am uanable to hear anything while calling.
4. Screen is not waking up if i press the volume up key(i have enabled this featur in settings).i have to hardly press twice or trice to light the screen.
5. While calling unwanted touch of screen is happening eventhough i have enabled the proximity sensor.
Also screen is not lightining up after conversation more that 1 min.
6. Can't cut the call through the earphone key.
7. I can't read Malayalam language in my phone.I installed Englis-Malayalm Dictonary and it shows some junk characters instead of Malayalam word.
My Mobile version build number is A859_ROW_S126_140804, baseband version A859.ROW.V4, 2014/08/04 19:04
Why Lenovo not enabling the basic feature.There is no update for the OS also.Hope Lenovo will rectify this ASP

Hello OMGitsUGOD,
i run into the same problems with my t420s, at least problems 2 and 3. I did not try to use optimus or discrete graphics settings in BIOS. I think there is something in the wiki about this, maybe you should take a look at that? https://wiki.archlinux.org/index.php/Le … IA-Optimus

Issues with lenovo t420s

I have three issues with my lenovo t420s, they might be related but I'm just not smart enough to fix them.
1:By default the bios is set to using optimus, and if I leave it at that x starts up all right but I don't think it is using the discrete graphics card at all? If I change the bios to use discrete graphics X fails with message "no screen found". I have seen this is an issue with optimus-laptops but I have also seen reports of getting it to boot of the discrete graphics card. So my question is simply, should it be possible to boot it of the discrete graphics card? (I have tried using both nouveau and proprietary drivers).
2: It doesn't see my display port connection. Running xrandr just shows LVDS and VGA connection, shouldn't the display port show up as well? On a side note up unitl yesterday xrandr responded with LVDS1 and VGA1, but after updating to 3.2 kernel it now responds with LVDS2 and VGA2?
3: Sometimes when I boot it thinks the vga is connected and boots with the wrong resolution. Running xrandr VGA says connected even though no cable is connected, running xrandr --output VGA1 --off --output LVDS1 --auto (or VGA2 and LVDS2 as of yesterday) fixes the issue.
Regards

Hello OMGitsUGOD,
i run into the same problems with my t420s, at least problems 2 and 3. I did not try to use optimus or discrete graphics settings in BIOS. I think there is something in the wiki about this, maybe you should take a look at that? https://wiki.archlinux.org/index.php/Le … IA-Optimus

HDMI issues with ATV2

MY ATV2 has HDMI issues since the last update, does not display anything after the Apple logo after a reboot.

Amen, stuff happens.
If you like posts that I make, be sure to click on the star underneath my name. Thanks!

Issues with Lenovo Update Retriever and T510i Modell 43149VG

Lenovo System Update and Lenovo Update Retriever fail to install Wlan-Drivers on a T510i Notebook.
Following Adapter is missing in dependency configuration: _PnPID PCI\VEN_8086&DEV_0084&SUBSYS_13158086
I added the card manually. Please fix Following package with this Adapter:
g1w213ww_s32
Thanks
I will expand this Thread with TVSU and TVUR Issues soon

Hi orth04, It sounds like ThinkVantage System Update is not working for you.
One alternative is to manually download and install the drivers.
The other alternative is to make System Update do what you want. Can you give us some more details about what happens?
I don't work for Lenovo. I'm a crazy volunteer!

Issue with Lenovo T440 windows 7 x64

We have recently got a new laptop the Lenovo T440. I imported the drivers into the deployment share. I also put storage and network drivers in WinPE folder. Once i boot to the PXE and select x64 it loads in to PE and gives an error saying that "the
following network device did not have a driver installed. PCI\VEN_8086&DEV_155A&SUBSYS_221417AA&REV_04." It allows me to retry or cancel. I have booted it to windows found what driver it uses which is a e1d62x64. I have made sure that that
driver was in the WinPE folder but it still isnt working i have even made it pull drivers only from a folder i created with only the t440 drivers. But that didn't work either. I am using PE version 3 (Windows 7) and all drivers i have installed are for Windows
7. If any one could help me with this issue that would be so awesome. I want to get this to work due to us more then likely getting more T440s. The networking hardware is a I218-LM if anyone needs to know that too.

So we just got the t440s's here as well. We faced a different issue, as the drivers being in the "general" store caused other models to blue screen.
I've got them working now, what I had to do with them is create a custom variable in the customsettings.ini called customdrivers set to no. If it detects the model, set the variable to t440.
In the drivers, I have the t440 in their own folder(downloaded the sccm package from lenovo), and all of the others in a folder called general(no conflicts with any other device). Under advanced configuration, I have two selection profiles as of now,
General, and T440.
In the task sequence, with the inject drivers, I have two inject drivers task. The first one, which under options, looks for the variable customdrivers to be set to t440, if it isn't it will move on. If it is found, it will install only drivers
from the T440 Selection profile.
The second one, under options, will only run of customvariables is no. This uses the general selection profiles.
Neither of these is set to All Drivers.
I know this is not your issue, but these were the steps taken to get the t440's successfully running here, and hopefully similar steps may resolve the issue you are having.
Best of luck.

Issues with Lenovo Essential G505S laptop(59-380146)

Hi,
Left half of the Laptop gets heated up abnormally
A.C. power adapter gets heated up abnormally and trend is increasing day by day
battery back up time is less than 1.5 hrs even when ideal (laptop switched on but no activity carried out
comments and suggestions requested from other users of the same model and solutions to minimise the heating.
many thanks in advance

Hi jagadesh,
Welcome back to Lenovo Community Forums!
I’m sorry to hear that the Laptop is getting heated up at the left hand side this issue seems to be hardware related but please check using the laptop on a flat surface as the air intake to the laptop will be better and for battery backup issue installing the LEM (Lenovo Energy Management) should resolve the issue, below is the link to download LEM.
Lenovo Energy Management Driver for Windows 7 & Windows 8
If the heating issue persists, I would Strongly Suggest Calling Technical Support for Assistance, below is the number to contact.
Hope this helps!!!
Do post us back if the issue still persists.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Mic issue with Lenovo G710 laptop

I have a laptop Lenovo G710 which i have upgraded to Windows 10. The laptop has an inbuilt microphone.I'm going through the setup process with Cortana but my voice isn't being detected when getting Cortana to learn my voice.I have done following to try and fix it but it hasn't yet worked:
I checked in Device Manager and looked for Microphone(IDT High Definition Audio Codec) and it says Device is working properly when i go to the properties of it.The latest driver was installed 09/07/2015.
Secondly, I have tested the inbuilt microphone out by going into Control Panel, then going to Speech Recognition then click on Audio Devices and making sure that the microphone is enabled.
I then right clicked on it Properties went to the Levels tab and increased the Microphone level to 100. Microphone boost is set to the max level. If anyone can help me to fix this issue, it would be much appreciated.Kind Regards,

Hey there,
I've been having the same problem for a long time now, seems like the IDT drivers for this model are fu**ed up somehow. No one ever responded to my problems. Don't expect anyone having a magical solution to this, unless someone from the Lenovo support really decides to dig deep. The newest driver is absolutely incompatible with Windows 10, even though it says it is. The mic works "fine" when listening to it through the recording devices properties, but never have I been able to make it work with Cortana, neither Skype! To temporarily solve this problem, until MAYBE a solution will come, I advise you to open Device Manager, and under Sound, video and game controllers, click right on the IDT High Definition Audio Codec, Properties, Driver, Update Driver, Browse my computer for driver software, Let me pick from a list, and select High Definition Audio Device. Your sound will sound worse, after some restarts it will maybe even go almost mute (at 100% volume set EVERYWHERE application-wise, windows-wise it will sound like 30%, 40% before), but at least the microphone will work service-ably with Cortana or Skype.
Guys could any of the official support REALLY take a look at this problem? Seems that not just me has it. This is a serious issue to solve. Thanks! (whistles in the wind, becomes forgotten in a few days)

Issue with Account Assignment Model - FI - GL Account

Hi SAP Guru's...
We are facing an issue while trying to post F-02, by selecting an account assignment model. This issue started when we updated the Production client with Support Packs (SP-12 and SP13)..this weekend.
While going for F-02, and selecting Account Assignment Model. A message Pop up with the following information - " Screen template VNU06 of acct assignmnt model Changed"..
_In the HELP Screen the following details are appearing :-_**
Screen template VNU06 of acct assignmnt model changed.
Message no. FX260
Diagnosis :-
The entry screen VNU06 of the selected account assignment template has been changed inappropriately.
System Response:-
The account assignment template can only be loaded when screen VNU06 has been corrected.
Procedure:-
If entries exist for a screen variant, the relevant entry screens must contain all fields that have already been filled (technical note: In this case, at least field AUFNR on screen VNU06 is missing).
Carry out the following activities:-
Add the fields to screen VNU06 (In the following transaction, choose Posting -> Account Assignment Template
Proceed)
Only then can you assign a new screen to the account assignment template or delete the fields not required.
1.) Interestingly i went and check whether any value is there in field (AUFNR - ORDERS) in the Table KMZEI...No Value is seen.
2.) Also this field (AUFNR) is not selected in the VNU06 Screen varient templete, by us.
Please help us.. This being a Critical Issue.. any of your valuable suggestion, is awaited.
Thanks
VinodRao

Hi Ravi,
Tks for response. I'm looking for ME_REQ_POSTED but it doesn't exist in se18. The only BADIs I can see starting with 'ME*' are:
ME_CIN_LEINRF2R
ME_CIN_LEINRF2V
ME_CIN_MM06EFKO
ME_CHANGE_CHARACTER
ME_CHECK_ALL_ITEMS
ME_DEFINE_CALCTYPE
ME_HOLD_PO
ME_PO_SC_SRV
ME_REQ_HEADER_TEXT
ME_TAX_FROM_ADDRESS
ME_TRIGGER_ATP
I'm using 4.6C version... any other suggest???
Edited by: George Navarrete on Dec 21, 2007 4:40 PM

Issues with Lenovo Ultrabook Yoga 13

Hi,
I have a Lenovo Yoga 13 laptop which does not turn on. If I remove the AC adaptor and battery for a few seconds and plug it back, it will turn on with no problem and everything works fine till next shutdown.
If I turn the laptop off (shutdown), it will not turn back on again till I remove the AC adaptor and battery for a few seconds. I even tried pressing off/on switch 10 times (each time for a few seconds) and tried holding off/on switch for 30 seconds to discharge everything, but still having the same problem.
Any ideas?
Solved!
Go to Solution.

If both battery and AC power is unplugged for a few seconds, then by plugging either the power or the battery, I can turn the laptop back on with no issues, but if I do not unplug both battery and the AC power, then it would not turn on.
If I disconnect only battery or only AC power, I can not turn the unit on. It seems that it has to discharge for a few seconds before I can turn it back on. I even press and hold on/off switch for more than 30 seconds but it did not help.

Issues with Lenovo g500

Hello,
I have been using Lenovo g500 for about a year now but last week there was some problem with my laptop and I had to restore windows using Lenovo's restore button. The windows restores just fine and I was able to update to Windows 8.1 althought all my data in C drive got wiped.
But now my laptop won't connect to any bluetooth device. Whenever I go to PC settings, it just says "searching for bluetooth devide but it never detects my phone or any other bluetooth devide.
Also, since my data got wiped, I have to install the drivers for my printer again but this laptop won't even recognize the CD!! It won't recognize ANY CD.
And the Lenovo Veriface won't work either now
I've searched and searched for these issues. I re-installed bluetooth drivers and lenovo veriface but they still don't work. And the bluetooth drivers never got deleted from my laptop since they were installed in Drive D but they don't.
Someone please help me I really need to print some documents but this laptop won't install my printers drivers.
Solved!
Go to Solution.

Make sure you download updated drivers from Lenovo Support section. Select only drivers supported by Windows 8.1, reboot system when needed. Once drivers installed, shut down the notebook, then power up again. May take several power on/off cycles to restore drivers to full functionality.
Printer drivers may not be Windows 8.1 compatible, if on CD. I would suggest downloading latest drivers from printer manufacture website.
Good luck.

Issue with HR Distribution Model from ECC to CRM

Hello Gurus,
I am replicating employees from the ECC to CRM. I followed the C05 u201CCRM Organizational Model with ERP HR Integrationu201D Best Practice. Initially employees replicated without any trouble from ECC QAS to CRM DEV. The issue came since we also created a replication model from ECC QAS to CRM QAS.
Even dough each replication model has defined each corresponding receiver system (CRD and CRQ), since we created the new distribution model, employees are now only replicating to CRM QAS which was the last created distribution model.
Since we only have data en ECC QAS we have use this same system for the CRD and CRQ. The question here is: Can we only have one distribution model? Is there any way to achieve employee replication also to CRD?
Extra Information: When using PFAL for replicating, I´m using object P and after executing the systems confirms in green the replication for both systems. But when I a search the HRXX in CRD I didn`t find it I just found it in CRQ.
Thanks for your comments on this.
Points will be reawarded

Dear Kumar,
you should not schedule RBDMIDOC before you have done the initial distribution because the most of the idocs will run into error (if new objects are created in ECC the distribution will create correct data in CRM; changes on existing objects will run into error because the object has not been created by distribution of essential data).
Before scheduling the idoc creation from change pointers you should have done the intitial distribution of organizational data and employees using the procedure described in note 363187.
Regards,
Michael

Reward for helping me out. Issue with Lenovo computers and musical equipment.

I know this may seem a wierd place to put this post, but as this looks like a conflict between hardware or drivers, I think it is possible that I can get better help from computer-Techs then Music-Techs.
Help me out before I grow bald and decapitate my self in agony.
I have used the last couple of months to build a setup to sooth my needs for using Native Instruments Traktor Pro 2.03
After hours of research I came up with a solution that says:
Computer: Lenovo T500 2.8Ghz with 4GB ram
Midi controllers: Numark Mixtrack Pro, Evolution UC-33e and Novation Launchpad
Softeware: Traktor Pro 2.03 and Midikatapult
All worked like a charm until I connected the Launchpad.
As it goes, it looks like the Launchpad and the T500 is a match made in HELL.
Whenever the Launchpad gets involved in any kind of midifeedback from Traktor or Midikatapult (for lighting up the LEDs), my computer totally freezes.
The freezes happens most of the time within a blink of an eye, and other times within half a seccond. Only options is to hard reset the computer in order to get out.
I have narrowed the issue to be some conflict between Lenovo and Launchpad.
Tried the setup on my wifes T400, with the same problem but when I hook it to my old HP it works fine (except for the HP being to slow to cope with it on a live playing basis).
Other people have the launchpad working fine on PC's with win7 pro 64bit just like me so it doesn't look like a win7 issue.
If I disable LED feedback, the setup works fine, but then I can't use midikatapult as it F&#$s my setup when I start up midikatapult. Seccondly it would be allmost impossible for me to navigate around a 80 button controller like the Launchpad without LED feedback.
I am in really pinned to the floor about having to buy another computer to get this working as the T500 sooths me perfect in all other aspects, so I am desperatly looking for a solution that doesn't envolve switching equipment or otherwise ruining me.
If you can give a usefull insight that solves this issue for me I will happily pay you 50$ for the trouble.
I really hope someone can help me out, and I know that I'm not the only one agonizing about this issue.
Best Regards Jeppe Johansden

I don't know anything about the MIDI products you're using so all I can do is give you some genreal tips, but hey, it might help.
First question - are these products all USB-based?
Second question - have you tried using an external POWERED USB-hub?
Third question - does it do the same regardless of which USB port you're plugged into? Some hardware seem to prefer certain ports to others.
Get back to me - will try to help.

VGA to HDMI issue with Toshiba TV

Hi,
I'm having issues connecting an old powerbook G4 running 10.4.11 into a Toshiba TV. I have a DVI to VGA converter from the laptop connected to a VGA to HDMI cable running to the TV's HDMI input. The laptop recognises the television in the display settings but is giving me a blue screen. I've tried restarting, and re plugging in the cables and it just won't work.
Any advice would be greatly appreciated!
Thanks

You need a DVI to HDMI converter or cable. HDMI uses digital video, which is lost when you go to VGA.

Hdmi issue with lenovo g580 model (2689)

Similar Messages

Maybe you are looking for