HDMI makes the screen look like a snow storm
I got my Mac Pro before the Retina screen. When i plug in the HDMI to the screen it looks like a snow storm and the I see a picture and then back to the snow. I tried with another Mac Pro and it worked fine. The picture ws there as it should. Does this have anything to do with my software? Is it a hardware mistake? What can i do to fix it?
Hi there,
I would recommend taking a look at some of the troubleshooting steps found in the article below.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
-Griff W.
Similar Messages
-
The screen resolution in 1920x1200 dropped on my MacBook Pro 17". Seems like I have not the same pixels. There are also vertical, thin lines on the screen. Makes the screen look milky. Anybody knows what's going on and how to fix it?
Take it to an Apple Store or other service provider for testing.
-
Dropped my 4th generation iPod now the screen looks like a negative picture. Everything still works just hard to see anything. Please help!!!!!!!!!!!
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>General>Accessibility and see if Invert Colors is on. If On turn it Off.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
iOS: How to back up your data and set up as a new device
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Hi, I need help for my notebook Macbook Pro - I turned on the notebook and the screen look like start but did not start nothing, the screen froze and continuing load, load and never stop
screen look on
-
FM OUTLINE_LIST_TCODES , how to make the screen looks bigger
hi guys,
i have used OUTLINE_LIST_TCODES to display 11 selection tabs,it ends up having to scroll down , how to expand the screen and make it bigger without hving to scrolls
-
The screen is just on, a dark blue or light black. I can hear siri. And when I receive emails but the screen stays dark blue when its on.
Take it back to whoever replaced the screen.
-
How to make a crop looks like a camera zoom?
If I crop a part of a video and want to make the crop looks like a camera zoom... is there a "zoom transition" to put before and after the crop part? Million thanks if someone can solve this technical question...
Let's zoom in.
Select the clip and move the playhead to where you want the zoom to start in the timeline.
Activate the Crop function Shift-C and selec the middle crop function in the top left.
Press the keyframe button.
Move the playhead to where you want the zoom to end.
Crop and reposition the selection as you like in the viewer.
Click Done. -
Make the N95 8GB screen look like a WM phone. Poss...
Hi all!
Just curious (and not trying to start a WM vs. Symbian flame-war) whether it is possible to make the screen of the N95 8GB look like, for example, the HTC Touch Cruise: http://www.letsgomobile.org/images/news/htc/htc-touch-cruise.jpg
Is it possible to make changes like this to the layout of the N95 8GB screen?
Regards,
Evert04-Mar-2008 12:38 PM
psychomania wrote:
I've only ever seen one program that allows you to completely customise the standby screen.
More info here:
http://www.symbian-freak.com/news/008/02/gdesk_beta_for_s60_3rd_ed.htm
I doubt that you will be able to make it look like a WM phone.
Well, there is a HTC Touch-like design on http://gdesk.wetpaint.com/page/GDesk+designs
I'll give it a try. It looks quite promising. Thanks!
Message Edited by meulie on 04-Mar-2008 12:57 PM
Regards,
Evert -
After burned to dvd the edge are cut off in my tv screen. looks like zoomed
hi
i am FCPX user. i create my project using format (resolution )as showed on the pic below
after burned to dvd the edge are cut off on my tv screen. looks like zoomed as showed in the pic below.
thanks for taking ur time to help me!!
then i export using master file as
showed on pic below
and after i burn on to dvd my edge are cut off. here pic trying to show before burn on my mac and after burned on to dvd
before burned on to dvd on my iMac screen
AFTER BURNED ON TO DVD ON MY TV SCREEN
i really need ur help thanks
after burned to dvd the edge are cut off in my tv screen. looks like zoomedThanks Alchroma
i used this dvd burner just incase..
but i thought i might have wrong settings from begning.
do u thinik this setting is alright when creating DVD
Alchroma wrote:
That thought jumped into my head as well.
If the Safe Area settings are OK then it's well a settings issue in either the DVD player or TV or both.
Al
Alchroma wrote:
That thought jumped into my head as well.
If the Safe Area settings are OK then it's well a settings issue in either the DVD player or TV or both.
Al
thanks again -
The bottom part of the screen is like bright it looks all weird i cant see annything in that part my ipod still has the 1 year warranty do u guys think i can get it fix for free or would i have to pay?
Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.
If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. If you iPod is defective, within warranty and not abused, Apple will exchange it at no cost. -
Why does new 5s screen look like the old 4?
We just bought and backed up two new 5s replacing iphone 4. Why does one new 5s screen look like the old 4 iphone. One phone shows new version, one is still old. I have downloaded and backed up twice, same thing happens. Used icloud to backup.
Sure, here's two photos, LP5 is the old screen style, NP5 is the correct screen. Note the differences?
-
I am having problems with the screen. the graphics look like infrarred and there are stripes in the Blue screen i am using now.
If Demo's suggestions don't help, and the iPad is out of warranty, try giving it a solid smack or two on the back with your knuckles or your palm. Hit where the Apple logo is or just above it, and be firm but not harsh.
Something internal might be a touch loose and a good smack or two may sort things out
~Lyssa -
How can I make a photo look like it's on a 3D Box Canvas?
Hi,
I have been scratching my head trying to figure out a way to make a photo look like it's wrapped around a wooden frame, like on a box canvas. I'm not concerned with the canvas texture, I just want to know how I can apply an effect or an action to a single image to give it depth. Any ideas?
Rossthe one i posted was a psd file using a smart object. Double click the smart object it then opens a new file, you add the photo you need, as you from the example that image is wide screen, my photo wasn't, so you use the 2nd file to make the photo fit how you want, then save and it then alters the original file, hence smart object. The background too was one, hence the perspective.
The splicing etc is ok , as you say if you have an odd one to do.
So essentially you make up the smart object once and then reuse. As you woudl need to make the canvas / canvas's into several templates for your liking, be it square / portrait / landscape or even spread over several canvases
The example i showed here is an illusion, but a pretty good one, It NOT 3d. Its done with shadows, this is the smart object.
as you see its just a perspective rectangle with the top and bottom left cropped off for the depth.
these are the psd layers as you see there are only 5, its not an action, but googling i did see an action, i think it was $35. But as i said bear in mind the amount of possible boaard canvases you may want.
2 of the other layers as you see are for the lighting and the top one is the 3d illusion effect, this particular one has the canvas effect too. I can't remember where i got this one from. I think graphic river do 3d canvas though, there will be others.
Another thing to consider if using an action is if it can do multiple boards. like ...
again just to show you before the illusion
Pretty much example like the emboss effect you can use, all done with lighting and darkness.
http://graphicriver.net/item/more-canvas-mockups/2581097?ref=riverpsd
http://graphicriver.net/item/canvas-mockups/917210?ref=riverpsd
there will be other avenues if you google -
Make arch installation look like live media
like bash completion, colorfull terminal, "boot splash screen" and all that stuff,
how do i make my installation look like that?And for the shell, the installer is using zsh
http://www.archlinux.org/news/install-m … available/
https://wiki.archlinux.org/index.php/Zsh -
How do I make multiple movies look like one?
I created a demo of 136 slides with mostly screencaps and one
small flash animation. The final published flash file is
approximately 30MB. When the demo is run on multiple computers, the
CPU utilization rises up to almost 100%, this makes the demo run
very slowly on most computers. I was advised to cut my captivate
movie in half ( in slides)... however even then the CPU utilization
is quite high. How can I break my demo into multiple linked movies
(to bring down the file size) but still have it play smoothly
without it stopping to load after each new movie? How do I make
multiple movies look like one?
Thank you.Would it work to make the navigation of the page go to the
next movie?
Maybe you are looking for
-
Income tax depreciation in india
Dear All, How do we adress the income tax depreciation in India. As we know the depreciation treatment for Income tax depreciation is a block concept...how do we adress that... Could any one explain elaborately if possible...short and precise inputs
-
I have an iPhone and keep my calendar into it. I have synced all photos. How do I get the calendar to sync with my MacBook Pro?
-
How do I stop cover flow from rotating????
How do I stop cover flow from rotating, I have switched it off but it still rotates. Phil
-
Generating Payment advice using PMW
Sappers, I am using PMW using payment method "D" I am only generating a flat file, but I am not seeing any payment advice that I see using type "T" which program needs to be maintained for the generating and where do i mantain this information. Pleas
-
Read mail greyed out, also Inbox, Trash, Sent, etc
I have two Macs, both use Mail Version 2.1 (752/752.2). On one of them, read messages are greyed out, as are the boxes down the left hand side of the page. Have checked the Preferences settings and can't see anything there. Any idea how to get of thi