HDMI Multimedia Desktop Charger Question

I'd like to get the the official the HDMI Multimedia Desktop Charger sold by Verizon....it has HDMI out but my main use would be just to play audio only. I would have this on a desk and want to plug it into a pair of powered speakers that has a 3.5mm audio in jack only (Not HDMI) So my questions:
1)Does this dock have an audio only out?
2)Does this dock have only HDMI out?
3)If so is there such a thing as a HDMI to 3.5mm audio adapter available?
Thanks

The previous post is correct, you can use the headphone jack on the phone while it is in the dock. As for an HDMI to 3.5, this would not be possible as HDMI is a full digital signal.

Similar Messages

R.I.P Desktop Charging Cradle for the HTC Incredible

Verizon, Is this true???
http://htcpedia.com/news/htc-incredible-desktop-charging-cradle.html
People want a desktop charging cradle for their phones. Why can one not be produced? A lot of us purchased the phones under the assumption that a dock was being produced. Are you going to allow Incredible owners to exchange their device for Droid X's? You can't get any manufacture to produce a dock that can charge? I really don't think people care THAT much if the home screen doesn't auto rotate. If the clock application is launched it works fine in landscape or you mean a dock that works in portrait isn't possible?????

no doubt!!!! check this one for another device:
http://www.fommy.com/view-full-page.asp?divid=HTC&cat=Cradles&skuno=80604
how difficult would it really be for them to just place the micro usb plug slightly lower to fit the inc? i love this cradle if the could duplicate it to fit the inc. it can't be that tough to do. and with minor tweaks you could lay it on it's side for landscape. it would be perfect....postrait AND landscape AND it has a slot underneath for an extra battery. the manufaturer would have a gold mine because they'd be the ONLY ones with anything to sell us!!!!

My new desktop charger DT-33 disappointed me

It won't fully charge and it charges for more then 6 hours I guess. I said I guess because i really don't know when the charge was finished. There is no instruction in the Manuel. There is instruction on my phone manual saying around 2 hours of charge if i use the phone charge. In 3 years i never over charge my batteries, i set alarm for it.
But right now i have no idea when the charge completed. And there is always 1 bar missing. So its not fully charged. So that means it needs more then 6 hours?
E63 phone happily using 2 batteries. I have no problem when i let the phone to charge

-They don't fully charge the batteries? NICE! I ordered 4 and they are on the way. And they were very expensive, not to mention that they don't charge on their own...I had to buy 4 chargers(AC-15E) to connect to each DT-33.
-The phones nowadays(5 years ago at least) need too much power, so one battery is not enough for a couple of hours of taking pictures, so when will NOKIA think of a charger just like the common chargers for the common batteries that are used on cameras or remote controls, etc. I mean a reliable desktop charger that is connected directly to the wall power socket and that can charge at least 4 batteries at the same time and with the option to charge only 1 or only 2 or only 3 at once?

Charging question considering specific use schedule

IPad 16 WIFI new no issues.
Got a specific battery charging question. Have read the Apple recommendations and would like to get some expanded information considering the specific way I use my IPad please.
I use my IPad 2 days a week; Wed and Fri. At all other times the IPad is not in use.
So far I've simply left it on the AC adapter when not in use and completely drain and recharge the battery every 30th of the month as directed for Lithium batteries by Apple.
Question is this;
Considering the specific way I use my IPad, should I leave it hooked up to the AC adapter on the days it's not in use, or would it be better to simply charge it back to 100% say on Wednesday after using it then take it off the AC and store it fully charged until Friday when I use it again?
In other words, which way would be OPTIMUM and cause the IPad less battery stress?
Many thanks for your advice on this.
Dudley Henriques

completely drain and recharge the battery every 30th of the month as directed for Lithium batteries by Apple.
That's not "directed".
The only reason it is recommended is so the system knows how much battery is left.
In fact, draining lithium batteries is not a good idea as they are not meant for deep cycling.
And completely draining the battery means simply using it till it shuts down (~15%), not till the charge is zero.
I would not recommend leaving it plugged in all the time.
Just use it and charge it when you need to. About once a month, don't charge it and just use it till it shuts down then do a full charge. Again, this is only so the system knows how much battery is left. It's not for "conditioning" the battery.

Desktop charger for iPhone4

I have the desktop charger that came with my non color ipod and used it with my ipod touch with no problems. When I plug my iphone4 into it a message comes on the display. "This accessory is not optimized for this iPhone" You may experience noise caused by cellular interference and a decrease in cellular signal strength.
Can I use this desktop charger, or will it hurt my iphone?
Thanks.

I get that on my juke box. It means it's not updated for iphone and if an incoming call is received, there may be extra noise.

Where's the HTC ThunderBolt Desktop Charger?????

How many owners are waiting on this accessory? The HTC ThunderBolt Desktop Charger has battery charging capabilities.
(Part#: HTC6400DTC)
It's been "Out of stock" since day 1, Verizon knows there are issues with the battery life, how about providing us a way to charge the device with the extended battery installed and a spare at the same time....Swapping batteries in and out is a pain and potentially damaging to the back covers.

Who are these "most people" ? And how are they using their device? ( "Awake" time and "actual usage" could vary greatly among those "most people" ). I see a lot of people jumping thru a lot of hoops to tweek away the core features touted on this phone to gain somewhat acceptable battery life. As far as I know Juice Defender is still beta (thanks but I'll wait on a finished, stable, relatively bugless release) I get different battery discharge rate on different days with absolutely nothing to point my finger at as a definitive cause. I've had the extended battery since day 1 (I don't mind the extra size and it actually fits my hands better) Most of the time I can make it thru my day with battery to spare but there have been days where my phone has warned me to charge immediately <15%)/ I have no social networks syncing, weather on 1 hour update( Too much fast changing this time of year ), email on 2 hour and I'm smack dab in the middle of solid red 4G coverage. My take on 4G is if it requires turning on/off to accommodate undersizing of the battery I've mitigated that by using the extended version.
The only charger capable of charging a Thunderbolt with the extended battery installed while also charging another battery (standard or extended) is HTC's. I don't want to add another charging device when 1 device will do. (I do also have a car charger)

Charging Playbook with Desktop Charger

Ever since the upgrade to 2.1, I haven't been able to charge my Playbook using the desktop charger. I can use the cord that came with the Playbook; but that doesn't help at night when I usually have the device on the charger and use the Playbook as an alarm clock. When I put it on the dock , the charging symbol comes on; but it actually starts to drain the battery. Ideas???
Solved!
Go to Solution.

The Rapid charger should have no effect to any OS update as its run direct from your home wall socket plug but however if its the other type of desktop charger that runs from USB as opposed to the small 3 pin dock port on the rapid charger then yes you will have this problem as a lot of us have since the update as RIM has changed the charge allowence through USB to lower the amount taken in to the Playbook disregarding any other threads on here saying otherwise, as we all know the USB Charging worked just fine before this 1032 update and now its a no go zone due to the OS change so if you are lucky enough to have a Rapid charger then you should be ok but if not then i would look at the charger rather than the playbook on this one? As to the Calender and Contacts that is reported on another thread here http://supportforums.blackberry.com/t5/BlackBerry-PlayBook/Update-2-1-0-1088-is-released/td-p/196374... following a prompt RIM update to 1088, sadly im not updating at the moment so cannot comment on the New OS Update.
Ah the good old iPad

How do I turn off desktop charging mode on HP Pavillion DV6

My pavillion prompted me to turn on desk top charging mode to preserve my battery life 'cause it noticed I had the laptop plugged in most of the time. I accepted / clicked OK. Since doing that my battery will not charge !!! It is a new battery and new charger (2 months old +/-) I dont think it is a hardware issue because everything was working fine till the software prompted me to turn on desktop charging mode ?

Hello nlorde,
You’re having a problem not being able to charge the battery for you laptop.
I’m not 100% sure where the setting for desktop charging mode is, but ill give it a try.
First I’d do a hard reset.
Power off the computer.
Remove the power cable and the battery
Hold down the power button for 15 sec while booth power sources are removed.
This should reset the hardware in the computer.
Next reset BIOS defaults.
Turn off the computer
As you turn it back on tap the F10 key. This will load BIOS setup utility.
Press F9 to load defaults
Press F10 to save and exit
When the computer boots back up, check to see if everything is working.
Also go to power options and reset defaults
Here is a link to reset defaults.
Clicking the White Kudos star on the left is a way to say Thanks!
Let me know how everything goes.
Have a good day.

Please help. USB-DeskTop software question

Hi,
Im in a crunch really bad and a freind told me about this and so far ive seen some AUSOME info and ausome generosity of helpen each other any way
have 2 questions one complicated . and i give thanks in much much much thanx in advance, ill even make u a free anything u want theme(pretty good at it)
1)is it possible to plug the berry to the pc and have it show up in my computer so i can juggle stuff around from sd card to device memory and back and forth?
i down loaded the usb and modem drivers eng (dm4.6 b13) that xandrex posted, and my phone settings i believ are right options-memoery on-no-prompt, yet it still is not showing up. it wasent even showing up when i had the desk top software on my pc. my first bold worked just fine like that then i got another one and it wont, i been tryen figure out for weeks.. pppppppppppllllleeeeaasssse help
2) ok keep in mind what i said in umber 1:::::::this is what i did to try to fix it.
      i got all this info from u guys
      A)first thing i did is download the driver that i mentioned in number one ,but did not install it right then
      B)then i followed the directions for properly uninstaleing the desk top software from this link .http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB02206&sliceId=SAL_Pub...    this was in mr BIFOCALS post.
      it had 5 or 6 steps and one of them was messing around inthe regestry.
      C)then i restarted my pc
      D)then i instaled the driver i quoted in number 1
      E)then i restared my pc again
      F)then i put the desk top software disc in to load onto my pc.and it wasent even 20 seconds into it and it gave me this message word for word"the wizard was interrupted before blackberry desktop software could be completely instaled........your system has not been modified.to complete insulation at anotyher time,pleasetry set up again"
i tryed this several times, and i have older cds with older versions and none of them would load all the same message, sooooooooo now im worst of than i was before. i not only cant get to my device memory still three my windows explorer, (ps media manager would not work either when i did have the software on here)now i cant even get the application loader which i use alot too. cause the software wont load.man im not a pc wiz but im not a retard either,the instructions were very very every well written, and went very smothly,except i was ent sure about were to put a space on a file that iwas directed to rename ,when i was deleateing everything. im a river boat pilot and my berry is my a big part of my life my connection to the world and my family 5 kids and my whole digital life haha thats funny to me.anyway i would really really appreciate any info or help anyone can send my way, and i will pay it forward . yall have a pretty tight site here, i been doing the crackberry thing but man yall have sum good info here                            thanks again   chris
Solved!
Go to Solution.

vibrations1 wrote:
bifocals
thanx for the help here are the info u requested:
1.my pc is running windows vista 32-bit
KB13187 How to uninstall or modify applications on Windows Vista including BlackBerry Desktop
2.phone is berry bold 9000
3.os for the phone is 4.6.0.167
4.sir i cant be sure how many times ive instaled desktop software on the pc ,cause ive had 3 different berrys,if i had to gues mabey 6 times,4 of those times in the last 48 hours.
You definitley need to run the clean procedure:
KB02206 How to perform a clean uninstall of BlackBerry Desktop Software.
Remove the other copies of the drivers here.
5.service packs????not sure what u mean im green a little Windows issues service packs for the OS
6.as of right now i uninstaled the driver i loaded last night and uninstaled the desktop software again,so as far as i know nothing is instaled right this minute;
I realize you would like to use DM 4.3 but there aren't any USB drivers for it listed.
I would suggest 4.7 download software and drivers here:
File name: BlackBerry USB and Modem Drivers_ENG (DM4.7b50).msi
File size: 14.238 MB
Date posted: 17-Oct-08
Download Software
Install and Cold boot the PC befoire installing the Desktop manager
Desktop Manager 4.7.0 B59 English - Without Media Manager
File size: 82.012 MB
Date posted: 23-Apr-09
File name: 470_b059_english_nomediamanager.exe
Download Software
7.i do have sum blackberry programs instaled that have to do with makeing themes here they are in case that matters
   A.plazmic 4.7
   B.black berry simulator4.2
   C.blackberry simulator4.3
   D.blackberry jde 4.2
   E.blackbery mds and email simulator
8. i have the 4.5 and the 4.6 and the5.0 drivers on my pc, but not instaled
Uninstall them, then install the fresh copy of the 4.7 device drivers
I have not yet did the clean uninstall (that yall suggested in that post) since last night. after i did all that last night,i installed the driver and berry would not show up on windows explorer,so then i tried to install desktop again and it left that message on my original post up top,so I restored my commuter and desktop was there again and working (I only really use app loader)    then I uninstaled it again.(not the clean way this time) and started installing and unistalling the drivers ,which lead to no prevail.            I would like to be able to use the app loader,and I would REALLY like for my phone to show up on my PC again so i can juggle my media around from SD card to device and all that stuff.
what would u suggest I do first sir?
I have desktop software cd's 4.3 and 4.6        I like the 4.3 version better one more fact (don't know if will help u) this is my second bold my first bold everything worked it showed up on windows explorer and desktop worked then it broke and I got another one and I changed nothing and this one will not show up on PC and media deal on the desktop software wont work,which I don't care bout that if it whould show up on windows explorer.
At the end of this install try connecting the Blackberry to the PC without Desktop manager running.
See if the device comes up correctly. If not run Windows update with the Blackberry plugged in. The
device should be recognized and the device drivers added.
Let us know how it goes!
Thanks,
Bifocals
than
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Discoverer Desktop Graphing Questions

I have several questions about the graphing tool in Discoverer Desktop:
1. I'm bringing in a customer id field which I convert with a to_char in the query from a numeric field. Most of them are 5-digit, but some are 4. I notice in the x-axis the customer id's appear only for the 5 digit id's, and for the 4-digit ones the identifier appears. i.e. if the 5th record has an id of 1508, instead of displaying 1508 it displays 5. Does anyone know how to correct this?
2. In the y-axis values, is it possible to display more than 5 decimal places? (We're dealing with very small percentages). When I try to enter 6 or higher as the decimal value in Options, it says invalid number.
3. When I open an existing workbook, it readjusts the y-axis scale to a max of 1, when I've set it to .0001. How I can I make this retain my scale values?
4. Is it possible to display the y-values in the graph area itself next to the plot points?
Thanks for any help!!!!

Hi paul,
Its a good idea to upgrade from 4i to 10g 4i is no more used by many and their are some issues or bugs with it.The latest version is 11g which has been released 1 week back.If not go with 10g version available.
1) Do all reports have to be stored on the database to allow them to be accessed by Plus or Viewer? Can only the 10G client version open files from a local hardrive or shared network drive?Yes they have to stored in the database so any ened user can access them from plus or viewer.
Can only one report be open at any given time with Plus or Viewer? In client it is possible to have 2 reports open at the same time to facilitate easier comparisons.Yes,if the reports are registered as different reports and if the end user has access to both the reports thn he can open and compare it OR if both reports are in same workbook as different sheets than its easy to view or compare.
NULL values are still showing the word "NULL" even though in Tools Options we have set it to show blank, existing reports are still using the NULL value.It should show blank,might be some problem.In discoverer 10g i think you will not find this issues.
Hope this helps you.
Best Wishes,
kranthi.

REMOTE DESKTOP CONNECTION (Questions For Experts)

Q1) Is it possible to connect remotely to a computer even if the user is in one country and computer is in another (without internet? If Yes Please tell HOW.
Q2) Is it possible to use hardware like printer while in remote connection with a tab or lets say I am connected with a tablet which has a USB port so if I connect a USB in my TAB will it work for the remote
desktop? (usb connected to the tab but should work as if its connected to remote computer -any possibility) If Yes Please Tell how to implement.
Q3) For ex. If I am connected to a remote computer and since my computer is not good for gaming and I want to use the remote computer to play games while the DVD is in my physical computer.....Is there any possibility
FINAL QUESTION : Can I connect to windows with an android or IOS devices without internet (PLEASE TELL HOW IF POSSIBLE) and I want to use my local Internet is the remote computer.
Friends whosoever has any knowledge regarding any question please answer me, help required. I will be really thankful to you .

A1- its possible to establish a remote desktop connection even if the user and remote computer in differerent countries but NOT possible without internet coonection... as you will have to use public ip of remote computer.
A2- To redirect devices and resources
Open Remote Desktop Connection by clicking the Start button , In the search box, type Remote
Desktop Connection, and then, in the list of results, click Remote Desktop Connection.
Click Options, and then click the Local
Resources tab.
Under Local devices and resources, select the devices or resources you want to redirect.
To see additional devices, or to redirect Plug and Play devices or drives and devices that you plug in later, click More.
To redirect supported Plug and Play devices, under Local devices and resources, double-click Other
supported Plug and Play (PnP) devices.
The Plug and Play devices that support redirection and are currently plugged in appear in this list.
To redirect supported USB devices, under Local devices and resources, double-click Other
supported RemoteFX USB devices. The USB devices that support redirection and are currently plugged in appear in this list.
Select the check box next to each device that you want to redirect.
To automatically redirect drives or devices that you plug in or connect to in the future, under Local devices and
resources, double-click Drives, and then click Drives
that I plug in later.
– or –
Double-click Other supported Plug and Play (PnP) devices, and then click Devices
that I plug in later.
A3 - not possible to mountDVD drive on remote desktop.
Yes you can establish remote desktop connection from android... there is an app called, Microsoft Remote desktop app, its very good , ı use it myself too...

IPad 3 Charging question

I just got my iPad 3 today, and it seem like the charger have some problem at first (but now okay, the charger is not charging my iPad 3 at first and I did a reboot, now all good.)
Well my question is, when you turn off your iPad 3 while charging, is that normal that the screen do not display any battery sign?
Just nothing? Or there will be a battery sign (like a green battery telling that you are charging the iPad 3?)

The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

Desktop Manager Question

Hello, i am using a 8700g currently which is running off of v4.1.0.346 (platform 2.0.0.143), with T-Mobile.
I purchased a new Bold online with AT&T due to bad reception at my home and i really liked the Bold.
My question is this: Which version of desktop manager do i download to transfer my 275 contacts to new phone? The newest one 4.7?
If i have left something out please ask for it. I was told this was the smoothest way to perform this task.

Problem solved. i went into ATT store and they transfered all contacts over in three minutes. i did not have any luck with pocketmac and wes that due to the sim card not being activated yet? that is all i can think of as to why it was working on the 8700 side and not on the Bold side. if you have "the" answer i would like to hear it, if not no reply is necessary.
thank you

Important Charging Questions

Recently, I bought an iPod Touch 4G. However, its charger (usb cable) wasn`t included with it. Therefore, my brother had from a long time ago a charger which he got when buying his iPod Touch 2G. By the way, he now uses it with his iPhone 3GS and he thinks that the charger affected his colors.
So I am scared to use his charger on my Touch 4G since it seems that his charger affected his iPhone. I also saw on forums that iPhone 3GS/4G and the iPod Touch 4G had a different voltage than the older ones so using an old charger would affect them.
To this end, here are my questions:
1. What version of the IPOD Touch and iPhone uses 5V.
2. What version of the IPOD Touch and iPhone uses 10V.
3. Using an older charger would affect newer iDevice?
4. Do wall chargers for iDevices change the voltage?
Thanks for you help.

Per the following Apple charger description, all the iPhones and iPod Touchs use the the same charger. It outputs the same voltage (5 V) as a compuer USB port.
http://store.apple.com/us/product/MB352LL/C?fnode=MTY1NDA4NA&mco=MTM3NDk1MjI
Some early hard-disk iPods used FireWire which is 12 V
Unless the 2G charger was defective, they is not way itcou;d adversely effect an iPhone.

Virtual Desktops theory questions

Hello!
Help me please clarify several questions on Windows Server 2012 R2 virtual remote desktop infrastructure.
Having read the following artcile http://windowsitpro.com/virtualization/virtual-desktop-infrastructure-part-2-finally-vdi
"The Remote Desktop Connection Broker role service is really the brains of the VDI environment. It communicates with and controls the other components, working particularly closely with the Remote Desktop Session Host in redirection mode, which
is why the Remote Desktop Connection Broker and Remote Desktop Session Host
in redirection mode are frequently placed on the same OS instance. However, when you start having more than 250 simultaneous connections, you might need to consider breaking the roles onto separate servers.
Remote Desktop Session Host in Redirection Mode
The concept of using a Remote Desktop Session Host in redirection mode isn’t new.
Remote Desktop Virtualization Host
The Remote Desktop Virtualization Host role service is installed on any Hyper-V host that will be participating in a VDI pool. This role service lets the Remote Desktop Connection Broker
role service communicate with the Hyper-V hosts, start and stop VMs, and gather internal information to enable client connections."
...I've concluded that RDSH and RDVH are the two separate roles that can be (and should be - according to the Figure1 !) installed onto the two separate OS instances (RDCB + RDSH in Redirection mode on one server and the RDVH on the other).
But when it comes to deploying VDI in practice I don't see how it's possible to separate RDSH in Redirection mode and RDVH services. Moreover, if we look at the following screenshots...
http://blogs.technet.com/b/canitpro/archive/2013/04/25/step-by-step-deploying-virtual-desktops-with-windows-server-2012.aspx
...we'll see that on step 1 Add the Roles and features wizard "wants" to deploy the
RDSH service while on step 3 the RDSH service transforms to the
RDHV service.
Q1) What does this service transformation means?
Q2) Is it possible to have RDSH in Redirection mode and
RDVH services on separate servers in Win2012?
Q3) Is it possible when using pooled virtual desktop collection to set, for example, 2 cores per virtual desktops wich based on Template1 and 1 core per virtual desktops based on Template2?
Thank you in advance,
Michael

"With RDSH, you will get RemoteApp, the "terminal sessions". Have you been around during Windows
Server 2003 Tarminal Server? That´s it, but with additional RDWeb. RDSH is pretty much the same as Citrix XenApp overall." -
yes, I understand.
"You can setup VDI infra with only one server, you will need
RDVH, RDWeb and RDConnector roles, that´s all. You don´t need RDSH role for running VDI. -
I'm agree... but if I have VDI up and running without RDSH why its item is present on Deployment Overview diagram??? Can't find corresponding documentation anywhere... :(
Regards,
Michael

HDMI Multimedia Desktop Charger Question

Similar Messages

Maybe you are looking for