HDMI not being detected on Pavilion dm4

Hello, I have a pavilion dm4-1165dx and for some reason my laptop won't detect the hdmi cable when I have it plugged into a tv. I have done this before and the labtop has connected and I was able to connect my xbox with the same cable so I know it's not that. Also when I open Intel Graphics and Media Control Panel for some reason under the display tab and subsequently under the Monitor/TV settings tab it says Monitors/ TV settings not supported, but I've used this before to connect it to the tv. Thanks for your help

>I have done this before and the labtop has connected
Did it work with the same hdmi cable?
Sometimes it's a cable quality problem.
Have you updated the graphics driver?
*** Say 'Thanks' with Kudos ***

Similar Messages

[SOLVED]HDMI port not being detected

Hi everyone. Since the last update (which I did yesterday) the HDMI port on my laptop is not being detected anymore. Before everything was working as expected. The xrandr output is:
Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192
LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 194mm
1366x768 60.0*+
1024x768 60.0
800x600 60.3 56.2
640x480 59.9
VGA1 disconnected (normal left inverted right x axis y axis)
The graphics card is Intel HD 4000. here's the lspci output:
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM77 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
02:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57785 Gigabit Ethernet PCIe (rev 10)
02:00.1 SD Host controller: Broadcom Corporation NetXtreme BCM57765 Memory Card Reader (rev 10)
02:00.2 System peripheral: Broadcom Corporation Device 16be (rev 10)
02:00.3 System peripheral: Broadcom Corporation Device 16bf (rev 10)
03:00.0 Network controller: Atheros Communications Inc. AR9485 Wireless Network Adapter (rev 01)
I tried downgrading mesa, mesa-libgl and intel-dri to their previous versions (9.1), but it didn't help. Is anyone else experiencing anything similar? What are your suggestions?
Thanks in advance.
Last edited by Caspian (2013-03-24 09:20:36)

My X220 laptop has a DisplayPort which I plug in a DisplayPort to HDMI adapter to connect to a TV. Working fine here after I updated this morning. The X220 is Intel SandyBridge (HD3000 I believe).
$ xrandr
Screen 0: minimum 320 x 200, current 1366 x 768, maximum 32767 x 32767
LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 277mm x 156mm
1366x768 60.0*+
1024x768 60.0
800x600 60.3 56.2
640x480 59.9
VGA1 disconnected (normal left inverted right x axis y axis)
HDMI1 connected (normal left inverted right x axis y axis)
1920x1080 60.0 +
1920x1080i 60.1
1280x720 60.0
1024x768 75.1 70.1 60.0
1440x480i 60.1 60.1
800x600 75.0 60.3
720x480 59.9
640x480 75.0 60.0 59.9
720x400 70.1
DP1 disconnected (normal left inverted right x axis y axis)
HDMI2 disconnected (normal left inverted right x axis y axis)
HDMI3 disconnected (normal left inverted right x axis y axis)
DP2 disconnected (normal left inverted right x axis y axis)
DP3 disconnected (normal left inverted right x axis y axis)

My built-in webcam is not being detected by CyberLink Youcam

My built-in webcam is not being detected by CyberLink Youcam (webcam) Pavilion dv6-6c10us

Hello,
I see that you're having an issue with the webcam in the notebook. If you could, please check and see if the webcam is listed in the device manager. If you don't know how to check for that, you can follow step 1.
Now, if you can't seem to find it listed in the device manager it could be that the webcam may have become unplugged internally and requires service. It could be a faulty webcam module which is not been recognized. I suspect you might have to send the Notebook in for a warranty repair to get it fixed. Now, if that's the case after following the steps below you will need to call HP@8004746836 and see what options they have to replace or repair the notebook.
Also, you can follow these steps to try and resolve the issue.
Steps:
Please follow this document which will guide you through a couple of steps on how to resolve this issue you're having.
The document should something like this:
First, try this steps that's circled.
If the first steps doesn't seem to resolve the issue go ahead and follow the next step below.
The first section "Video does not appear in your webcam software (such as YouCam, Skype, Messenger, etc.)" will guide you through a couple of trouble shooting steps to get the webcam to work within these programs.
If the first step doesn't resolve the issue please go to step #2 "Reinstalling the original webcam program that came with your computer”. This section will guide you through recovering the webcam software and drivers. This is the most important steps in the document if nothing before this resolves the issue.
It should look something like this:
Once you have finished both steps please let me know the outcome. If you have any more questions please ask.
THX

My Ipod Nano 5th generation is not being detected by Widows and Itunes. I have tried everything based on the trouble shooting tips outlined. Has anyone had this situation before? How was it resolved. My Ipod is just out of warrenty

Have done all trouble shooting tech a through Apples and still have not resolved issues on Windows and itunes not detecting my Ipod nano 5th generation device. Tried restoring the device manually using disk mode and still not being detected by the computer. Device is our of warenty as when service repair charges are $125.00 dolars more than I paid for this device. There must be some way to restore the entire device to factor settings without having to be connected to itunes and Windows. I wish I could connect but again device is not being read. I have another Ipod that is 8GB instaed of 16GB and it works fine. The sad thing about this situation is that my 9year old daughter worked hard doing delivering fliers for a long time to save her money to buy this 16 GB 5th generation Nano. Otherwise the Ipod works well but will not syncronize songs as it is not being detected. Maybe this is a result of corrupt files that got onto my daughters Ipod somehow and thus causing it not the be detwected through the USB connection thus as a result not be understoud as a working device through Windows and itunes. If anyone can help me out there including itune techs that would be well appreciated, but for now my daughter is not able to add new or delete any songs on her ipod as well pictures, and everything. Thanks

Try changing the cord. I could NOT get my computer to recognize my iPod 5th Gen until I read somewhere that different apple devices use different cords. I was inadvertently using my iPad cord and that caused my computer to not recognize my ipod.

Ipod 4g 32G not turning on, not charging (on multiple cords, both comp and wall, 4 20min), not being detected by Itunes or Windows 7 64bit OS, will not reset, tried taking it out of "DFU", NO DMG, Itunes up2date, All I'm getting is a blank black scrn

Ipod Touch 4th generation 32G not turning on, not charging.
I have used multiple cords on both computer USB and wall USB converters. I let it sit there for over 20 min with each attempt.
It is not being detected by Itunes or my Windows 7 64bit OS. I have tried all 4 of my USB ports (both USB 2.0 and 3.0), with 3 different chargers.
Holding home and power button will not reset.
Tried taking it out of "DFU" mode but Itunes won't detect it, I didn't think that would work anyway.
NO DAMAGE, I have been very careful with it, aside from a few minor scratches. (that you can't even see unless the light reflects them)
My Itunes is up to date, as is my OS.
All I'm getting is a blank black screen. It has been working fine on this computer before. I have no idea what could have happened. I'm at my wits end here.

See if you missed anything here:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My iphone 4 is not being detected by any of my computers and not charging when connected to any computer. It will, however, charge to the car or wall. The only change that I can think of is that I downloaded a podcast from itunes directly from my phone.

My iphone 4 is not being detected by any of my computers and not charging when connected to any computer. It will, however, charge to the car or wall. The only change that I can think of is that I downloaded a podcast from itunes directly from my phone. I've since deleted this podcast with no luck. I've restarted both the phone and the computer, still no luck. One computer is running Vista and the other Windows 7, both have the latest Itunes Update. Anyone have a fix for this?

You clearly did not notice that you have joined a USER TO USER COMMUNITY FORUM
This is NOT Apple ,Apple do not read nor do they therefore respond
So if you would like to wind your neck in ........................
try a reset of iPhone and then a restore,best, as new and if it then functions correctly try restoring with your backup

Hp v235r flash drive not being detected on my computer

Hi,
I am using hp v235r flash drive for more than 5 years. It's not being detected on my computer since two days. Can any one solve my problem, as there is lot of important data stored in it and hasn't been backed up recently.

Hello budda48,
Its possible the driver for the pen drive is corrupted in your computer, or the drive has met its end of life.
First, confirm that the Pen Drive is seen by other computers. Plug it in to another computer that you havent tried yet.
If it is not working on other computers, then the usb drive is corrupted and there wont be anything else we can do.
If it is working in other computers, then try these steps to troubleshoot the Pen Drive.
Confirm that the port on the computer is not bad. Choose a different port to insert the drive. Next…
Part 1: Make sure that the drive has a drive letter assigned in Disk Management.
Open Computer Management by right clicking on Computer and clicking Manage.
Click on Disk Management. Give it a moment to open the view of the drives installed.
Look for a drive that does not have an assigned drive letter and is not labeled as System Reserved.
Note: System reserved drives are reserved by Windows and will not allow you to assign a letter.
Right-click the unlabeled drive and click Change drive letter and paths…
Click Add and then click OK to select the first available drive letter.
If the Change drive letter and paths… option is not available, make sure that the drive is Online.
If the drive is Offline, right-click the disk number and click Online.
Part 2: If the drive does have a letter assigned and it still does not work, uninstall the driver.
You can safely remove any usb drivers that are not in use (hidden drivers). Devices that get plugged in later will simply reinstall its needed driver again.
Remove the pen drive from the computer if it’s attached.
Right click Computer and click on Properties. In the System window on the left side, click on Advanced System Properties.
Choose the Advanced tab and click on Environment Variables… button at the bottom.
Under System Variables, click on the New… button
Type this in the box that pops up. Variable Name: devmgr_show_nonpresent_devices and also give the Variable Value: 1
Click OK on all the open windows to close them out.
Go to Computer Management again and click on Device Manager. Go to View at the top of the window and click on Show Hidden Devices.
Click on the drop down arrow for Universal Serial Bus Controllers to open the list. Look for any USB Mass Storage Device that is hidden (greyed out) and delete it. There may be several and it’s ok to delete all those hidden USB Mass Storage Devices.
When you connect the pen drive to the computer again, give it a minute to reinstall the driver.

My iPhone is not being detected on my laptop itunes. How do I get it to appear under devices?

My iPhone is not being detected on my laptop itunes. How do I get it to appear under devices?

iPhone, iPad, or iPod touch not appearing in iTunes

HT203128 My iPad is not being detected by iTunes after I updated to the latest version of iTunes. What should I do?

After updating to the new version of iTunes, my iPad 2 is not being detected when I tried to sync. Any solutions?

A few things to try. Any one or a combo mayhelp
Reset your iPad.
Hold down the sleep and home keys for about 20 seconds. Then plug it back in and see if it is seen now.
Try a different USB port
Reboot your computer
If you have a PC:
If that doesn't fix it, go into the control panel, add/remove programs. Uninstall iTunes, apple Mobile device service, apple application support.
Then redownload and reinstall iTunes. then try again.

My iPod touch 5th generation had white screened an it won't let me rest it by holding down the home button an the power button for ten seconds I've pulled it in to iTunes an its not being detected what can i do as its starting to over heat?

my iPod touch 5th generation had white screened an it won't let me rest it by holding down the home button an the power button for ten seconds I've pulled it in to iTunes an its not being detected what can i do as its starting to over heat?

If you can't get it to shut down or restart when holding down the Home and Sleep/Wake buttons and you can't get it recognized in iTunes to restore it, the iPod may have suffered a hardware failure and will need to go to Apple for service. Someone else here may have additional suggestions, though.
There is no "fifth generation" iPod touch, by the way, just for the sake of clarity; not yet, anyway.
Regards.

My iphone is not being detected by the itunes on my laptop with windows 8

the iphone is not being detected by the itunes on my laptop with windows 8
someone please help

iPhone, iPad, or iPod touch not appearing in iTunes

IPhone 6 and iPod Touch 5 not being detected by iTunes 12

iPod 5 and iPhone 6 is not being detected after I downloaded iTunes 12.1.2
Tried changing the lightning conductor, that didn't help either.
Re-installed iTunes but it was of no use. :/

See iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Iphone 4s not being detected by windows 8 laptop and itunes

Hey all,
My iphone 4s is stuck in recovery mode and my laptop is not detecting the iphone when i plug it in. I plug in my other iphone and ipods fine but this iphone 4s is not being detected so i know it is not the cables. I have uninstalled all of the apple apps and drivers from my computer including itunes and re-installed them again and still nothing. When i turn on the iphone it shows a blue itunes logo with a cable indicating for me to connect it to my laptop, but it turns off after 30 seconds which doesn't allow it to restore thus a notification shows up on itunes saying that the iphone could not be found.
I downloaded the latest version of ios, but could not install it since the iphone is not responding. so right now it is basically a paper weight.
Is there anything i can do?
thanks all....

Hello Bethany2
Try creating a different user for your computer and open iTunes to see if shows up in that newly created user. The article below will home a few more troubleshooting steps, some of which you have already tried.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Regards,
-Norm G.

Ipad 4 ios6.1 not being detected on itunes through wifi.

Hey guys, i don't know what's effing problem is with the itunes??
i have enabled the wifi sync option though, still my ipad is not being detected on the itunes.
Once in a while i restarted my ipad and then the ipad was detected. I transferred some of the files and then closed the itunes. After a while i opened the software again and got the same issue..
please help.
Thanks

you have to make sure both your wifi router and the computers firewall are not blocking the ports used for wifi sync with itunes

I am making an iMovie trailer on my iPad 3(updated) and I recorded a few clips on my iPad Camera but they are not being detected on the iMovie Videos section. How can I make them show up?

I am making an iMovie Trailer on my iPad 3 (updated) and I recorded a few clips using my iPad Camera but they are not being detected on the iMovie Videos scetion. How can I make them appear so I can use them in my trailer?

Hi Stuck-in-NY,
If you are looking to transfer your purchases to your computer, you may find the following article helpful:
Apple Support: Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519
Regards,
- Brenden

HDMI not being detected on Pavilion dm4

Similar Messages

Maybe you are looking for