HDMI not outputting to anything

My HDMI has stopped working. I used my HDMI out daily to do presentations, connecting with no problem to TV's and projectors. Today I tried to connect to both a TV and Projector and nothing happens. I tried different HDMI cables to ensure it was not a cable failure with no luck. I notice when I press the "F10" button that allows you to switch output modes it will only allow "PC Only" output. I have the most up to date drivers and everything else seems to work fine...Any ideas?

Well if the reset Resetting iPod if it appears frozen or doesn't respond doesn't work, then try the restore Restoring iPod to factory settings
Regards
Colin R.

Similar Messages

HP Mediasmart DVD on a6750t will not output 5.1 channel data via SPDIF or HDMI

So I got a new customized HP desktop on Friday. Started to play with it on Saturday. I called Sunday morning to request an RMA number and return shipping label. Here is my saga:
Started HP issue calls at 3:47am FEB 15th 2009
Gion (per rep spelling) stated return will be handled through warrantee/support department). He stated HP does not allow them to release a badge number. Ticket# xxxxxx3374.
(Transferred to warrantee/support department)
(The line was full of static- asked for the 800 to call back. Person said he didn’t have the number I called in on. Had to log on to www.hp.com. Found the number to call was 1 (800) 474-6836. I called this number.)
Satya (per rep spelling) answered the line. I informed rep that I am not receiving any 5.1 output from the Blu-ray disk software that was provided by HP (HP Mediasmart DVD). Advised him that all MS products, DVD's, and HD devices were sending 5.1 channel output to my Yamaha receiver. [DVD’s are the important part. As the same drive is used for BOTH DVD and Blu-Ray, it is my opinion that the hardware is working fine.] I reiterated many times that the only thing not sending 5.1 channel data was the HP MediaSmart DVD software player for Blu-Ray disks.
Satya ran various tests and wanted to “call back tomorrow with a solution“. He seemed to think that perhaps there was a problem with hardware and possibly I had not received something in my order.
I clearly started I wanted a RMA number and I wanted to return the product. Satya refused saying he had to "research" the problem before he could issue the RMA number and return the product. He said he would call me between 2pm and 5pm tomorrow (MST) (I informed him it was currently 4:49 am at my location.)
The problem is not with the hardware. All Microsoft software products that offer 5.1 channel support are sending via SPDIF (optic cable) 5.1 channel data. Again, all DVDs and other 5.1 devices (HD PVR) are sending (via SPDIF) 5.1 channel data to my Yamaha receiver. The only thing not outputting in 5.1 is the Blu-ray disk software player (HP Mediasmart DVD). DVD’s are ran using the Blu-ray drive (only one on the system) and are sending 5.1 channel data with no issues.
Ended HP issue calls 4:52am FEB 15th 2009
So, any other suggestions? I have tried various things like HDMI-Passthrough, HDMI-PCM, SPDIF, and 6 speaker output on the HP MediaSmart DVD Blu-ray software player application to no avail.
This question was solved.
View Solution.

FEB 16th 2009 1:15 am
Decided to try some trial Blu-ray programs to see if this issue can indeed be resolved with a different software package.
Corel’s WinDVD9 would not play a Blu-ray disk. I received no errors. The program loaded the disk, after about 10 seconds stopped and went back to the main screen.
Cyberlink PowerDVD had a trial limitation that does not allow Blu-ray disk playback.
ArcSoft TotalMedia Theater (TMT) works flawlessly. Outputs in 5.1 surround with no issues, therefore my assumption that it’s a software issue is correct.
Due to the problem being software related, I will call HP to see if there is a way they can send me a different Blu-ray software player. I like the system and do not really want to ship this back to HP. There is a sale tomarrow and I might even buy another system for my mother if HP will work this out.
HP call start at 2:06 am FEB 16th 2009
Called 1 (800) 474-6836. Satya answered the line. He asked if his supervisor had called me. I stated no, I had only received his call at 7:47pm and I had placed a call to Bridgette at 8:37 pm for a RMA number and shipping label.
I advised him I was willing to try and work with HP now that I found it was indeed a software issue. I asked him if there was a possibility of getting a different software player that would work with my setup. I advised that on my own I found that ArcSoft TotalMedia Theater (TMT) trial version works (based on me installing a trial version). Its my understanding that HP provides many software titles from ArcSoft including a MediaConverter I also purchased for the desktop.
He placed me on hold to find out.
He said HP doesn’t carry or support ArcSoft TotalMedia Theater. He said he would have a supervisor call me back within 24 hours with a solution. I advised him to stop the RMA. He stated an RMA had not been issued yet. I gave him the RMA number I had and advised I had received a shipping label via email from Bridgette per my earlier call. He placed me back on hold to check.
He said he cancelled the RMA and would have a supervisor call me back between 2pm - 5pm (within 24 hours).
Call ended at 2:34 pm FEB 16th 2009
I am guessing that HP support is not enpowered to solve a problem like mine. I would have been willing to work out something with HP but its is seeming more and more that HP really doesnt want my business. The issue here is software limitation PLAIN AND SIMPLE. I paid (in part) for a Blu-ray player that would play Blu-ray disks and output sound in 5.1. The TRIAL version of ArcSoft TotalMedia Theater works fine. Therefore the hardware is fine.
Without a different software player shipped to me OR me buying the ArcSoft TotalMedia Theater software for 80 dollars, I am forced to listen to Blu-ray disks in 2 channels. I would like to work with HP but if HP will not work with me then I have no choice than to return the product.

HT1338 FCP-X 10.1.3 will not output HDMI video through Blackmagic Intensity Pro

I can not get HDMI video output through FCP-X 10.1.3. I tested the card and I get video through it to my HDMI monitor using Blackmagic Media Express, so I know the card, monitor, and cable are in perfect working condition. I have windows>AV output selected in FCP-X, but can not get a signal through. Has anyone else experienced this? Any answers out there? I think it is a bug, and a major one at that. I really need this for color grading and to properly view my actual clips.

I guess my system just did not like Wednesday. I started it all up today and it is working like a charm, just like it should. There is no reason it did not start yesterday as I had restarted my Mac Pro several times. We shall leave it as unknown computer glitch as nothing else fits! Did nothing different, don't know, but all is fine on Thursday morning.

Thunderbolt HDMI not transmitting to Samsung TV?

Hi there,
I have a HDMI cord running through the wall, up the attic, and out to my Samsung TV. It normally works with everything else. When I plug in the Thunderbolt to HDMI cable and plug in to outlet (that runs through the house out to my Samsung), the MacPro (tower) doesn't show any display options for it. It's as if it is not there at all. The retina screen works fine, which is what I use for my MacPro (tower) and is used with thunderbolt. Why is this happening? Does the cable need a booster? All 4 ports for thunderbolt on the back of my tower work for my retina screen (Mac), but will not output anything to my HDMI Samsung Television. I am using Mountain Lion, latest version.
Thank you, and help would be greatly appreciated.
Best.

If you are running 10.8.5 you don't have a PowerMac.
If you have a Thunderbolt connector, you don't have a PowerMac. PowerMac refers to tower Macs prior to early 2006.
Use this tip to properly identify your Mac:
http://discussions.apple.com/docs/DOC-6413
That will tell us what connectors are normally found on your Mac. If you have a Mac with removable graphics cards, go to your System Profiler and tell us what graphics card you have. If you have a cheese grater case Mac Pro, it does not normally have Thunderbolt. The black "trash can" Mac Pro is the only one that has it built-in.

Satego x200-21u - Remote and HDMI not work on Windows 7

Hey
I have a problem with win7 and the remote that was delivered with my notebook when i bought it
I installed all drivers from the toshiba homepage for win7. I also installed some of the winvista driver, like the webcam- and the touchpad drivers.
The only two things, not working are the remote and the HDMI-Sound output.
my remote doesnt work with win7. and if i connect my notebook to my flat-tv via HDMI-Cable i only see the picture but hear no sound.
I changed also the settings in the soundoptions in win7 from default to Digitalaudio (HDMI) but it doesnt work anyways..
can someone tell me which drivers i need to install these two or what i have to do, to make my remote and the HDMI output work?
thanks alot

Hi mate,
This is really strange to say because this notebook is a little bit older and therefore there is no official Windows 7 support I think...
Do you have yellow exclamation marks in device manager at the moment?
For HDMI I think chipset, display and sound driver should be installed. Maybe you can get one on the Intel page directly.
Make also sure that the newest BIOS version is installed on your notebook.

Issue with HDMI audio output

Hello everyone,
this is my first post in Arch Linux forum. I am a Newbie but have always managed to work things around with ArchWiki documentation, but I am having an issue I could not solve for some time now.
My HDMI audio output was working fine, but stoped working about a month ago, maybe due to some update. I use the open source ATI driver (xf86-video-ati package), and enabled the kernel parameter radeon.audio=1, like it is documented.
My graphics card is a Radeon HD 3650. I checked for the compatibility of the driver (http://www.x.org/wiki/RadeonFeature/#De … ting_names) and it seems to be ok.
Do you have any suggestion to help me?
Thank you in advance

Andreaskem wrote:
Output of "aplay -l"?
Do you use pulseaudio? If so, what is the output of "pactl list"?
Thank you for your reply
Here is the output of aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC268 Analog [ALC268 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: ALC268 Digital [ALC268 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
No, I do not use pulseaudio.
Last edited by rud25 (2013-10-13 19:15:09)

Report not output ENGLISH character

hi,
im using 12.1.3,
recently just did a customization report. but the report not output in English character, instead it outputs in Greek or Symbol font in PDF.
i can see the ENGLISH output if i run it in REPORT BUILDER.
my app server is RED HAT 5. I have configured the printer correctly
anything that i need to configure?

Hi;
Please check below notes:
How to Setup Pasta Quickly and Effectively [ID 356501.1]
Also see:
R12-Pasta option
PASTA FOR R12
Regard
Helios

Html App: air.trace() not outputting to console... are Adobe still supporting html apps in AIR?

Hi
Just getting up and running
Mac OS X 10.9. Adoe AIR 3.9. All working fine except air.trace() not outputting anything to the console.
Bit of googling meant I created a mm.config in ~ with the line:
ErrorReportingEnable=1
but still no joy.
Any other tips for getting this to work or is it just now broken and/or unsupported?
Are HTML apps wrapped in AIR now legacy technology?

I have the same question... I've been trying to get an Adobe AIR HTML app going, but there appears to be no IDE that supports debugging an HTML/JS AIR App, and fdb, which is supposed to be able to debug HTML/JS AIR apps, does not.
Is HTML/JS still a supported way of developing Adobe AIR apps? If so, then why aren't issues like this getting some attention?
-Josh

No HDMI Audio Output for DV6-6100

My HDMI sound output worked fine until a few weeks ago when it stopped working. The picture will show up on my TV but the sound will play through the laptop speakers. After looking through forums, I checked both my device manager and the sound page under the control panel and tried to make sure it was not something simple. My computer is the HP DV6-6100 which is the quad edition. I run Windows 7 Home Premium. Thanks!

Hello sillygoosetime,
Please take a look at this document, which provides troubleshooting steps that I hope will help resolve your HDMI sound issue.
Please let me know if this helps.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Select HDMI audio output when headphone connectted

In Snow Leopard, I can connect my headphone to Mac Mini, and select HDMI audio output when I want sound from monitor, or select headphone.
But in Lion, I can not select HDMI when headphone is connectted, so I have to plug/unplug headphone very often, quite anoyying...
How can I disable this feature?
Thanks.

I've just started a thread regarding this exact issue, but in Mountain Lion. Did you ever solve it? Or, if you have upgraded to Mountain Lion, do you still experience it?
EDIT: Almost exactly 1 year later you get a response. lol.

Turn off HDMI audio output?

Hi all.
I have my ATV (current gen) hooked up to my TV via HDMI, and hooked up to my home theater system via optical audio cable. The problem is now, sound is being output on both the TV and the home theater system. I can turn the volume on my TV to off, which is a workaround, but it's a bit kludgy. Is there a way to turn off the Apple TV's HDMI audio output or otherwise tell it to just output the video and not audio over HDMI?

Jedidiah Sorokin-Altmann wrote:
I think it's silly that I can't change the audio output, but I appreciate the help.
I'm actually glad that all outputs work simultaneously - something like a PS3 where you have to choose between optical or HDMI can be a real pain if sometimes you just want TV speaker audio (HDMI in my case) and other times you want the full surround experience (optical to hi-fi).
I'd have no qualms about allowing disabling individual outputs but having them active over more than one is better than constantly having to fiddle in Settings menus each time you want the audio from a different device.
AC

HDMI not working

Background I bought a Spectre x360 13-1402dx laptop just two days ago. When I tried to connect it to my Dell U2412m monitor through HDMI cable, I found that it displays my screen in a very fuzzy way. The following photo is one example. You can see red noises in darker region, and skyblue noises in whiter region: In comparison, I have been using this monitor without any issue for years, and with the very same cable and monitor I get a clean and neat screen with my old laptop: Possible Causes? Setting issue? Probably not. I have tested all the possible resolution and frequency options but none has worked; they displayed exactly the same noise patterns. Cable issue? Definitely not. I have tested two differend HDMI cables, with one old and the other delivered just today. Both worked for the old laptop and did not work for the new one. So I safely excluded this possiblity. I came to think that one of (or a multiple of) the following is a possible cause, though I nave no definitive answer now. Laptop hardware problem.
This is the worse thing I can imagine, and also the most likely cause for my issue...
Windows 10 compatibility problem.
I googled and found that many suffered from HDMI output when they migrated to Windows 10, but mostly the issue was that their PC or laptop became unable to detect HDMI, not a fuzzy-screen problem like me.
Monitor problem.
But this does not seem to explain why this works for some computer and not for other. (Basically I tested it with the very same resolution I used for my old laptop.) Question. I would like to figure out what is the cause of my problem. Specifically, (1) I would like to know if my brand-new laptop has hardware defect or not.(2) As a follow-up to (1), I would like to know how to diagnose my laptop. Or, if self-diagnosis is not a reliable method, should I call an expert? Thanks in advance! Addendum. The following photo shows an extreme case of the problem I am suffering from. A supposedly black screen is now filled with random red noises. (That black screak is caused by the presence of the cursor.)

Hi! Here is a video!http://www.youtube.com/watch?v=httuIXjGz0Y
PS you will have to use the sourse button on your remote to select HDMI I or HDMI 2.
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.

IPod not recognized by iTunes. Also iPod seems disabled/locked showing "do not disconnect". Not responding to anything. Any help please.

My iPod is not being recognized by iTunes. iPod seems disabled and not responding to anything. Permanently on "do not disconnect". Not sure what to do.

Hello,
My iPod is not being recognized by iTunes or internet
explorer. It used to, but not anymore. It just
dosent show up when I connect it to my computer.
Also, the "do no disconnect" sign does not appear on
my iPod when I connect it. It is still able to
recharge, though.
have u tried a different usb port?
I read that I have to restore it. I have tons of
songs in my iPod that I do NOT want erased! How can
I back these songs up? I have some songs on my iPod
that are from another person's computer, so if they
get erased, the songs are gone forever.
try this http://www.copypod.net/
Nano 4GB black|Moto RAZR V3 black| PSP| all kinds of cases for nano|radio/remote Windows XP <img src="http://i36.photobucket.com/albums/e13/superman5656/c.jpg" ="right"

Need lightroom 4.4 asmac is 10.6.8 and not compatible with anything higher. Does this come with the creative cloud? Would really like a disc but that doesn't seem to happen anymore. Currently have cs4 and d7100 hence need 4.4 to open raw Any idea

need lightroom 4.4 asmac is 10.6.8 and not compatible with anything higher. Does this come with the creative cloud? Would really like a disc but that doesn't seem to happen anymore. Currently have cs4 and d7100 hence need 4.4 to open raw Any ideas? Is this now customer service or does adobe have a customer service team . Site not user friendly. Thanks

Graham Giles wrote:
Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
• I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
I know that using a cloned drive would work well in this instance.
I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive?

How do I use my late 2011 iMac ( with thunderbolt) as external monitor for laptop/Xbox or other device with hdmi as output.

May be this question has been asked thousand times. how do I use my mid 2011 iMac ( with thunderbolt) as external monitor for laptop/Xbox or other device with hdmi as output. if apple hasn't removed that feature and has just moved that functinoality to thunderbolt then how can I use it. currently there is no laptop available with thunderbolt output. no 3rd party converter available. whats the use of having feature on latest functionality if we cant use it. I wish they would have made one port has mini-dvi and other thunderbolt for backward compatibility untill some vendor comes up with converter.

It Says :
Mac (21.5-inch, Mid 2011) and iMac (27-inch, Mid 2011) and later computers support Target Display Mode via Thunderbolt to Thunderbolt cable (2 m) when the source is another Thunderbolt-equipped computer.
Name one computer model/vendor which has thunderbolt as output for display + audio. this is so stupid to move to new technology without availbility of its compatible devices.

HDMI not outputting to anything

Similar Messages

Maybe you are looking for