HDMI only showing 720 on my TV with a new 1080 Apple TV?
My tv says it supports 1080
You say new 1080p AppleTV but in your initial question you have AppleTV2 listed at the bottom.
You may have both and I assume you know AppleTV 2 only does 720p ? AppleTV 3 does 1080p.
May be worth testing another HDMI input or lead if you can.
Do you have another TV to test with?
Could be some kind of compatibility issue in which case send feedback to Apple here:
Apple - Apple TV - Feedback
AC
Similar Messages
-
My old PC broke, it was the only pc my classic was sync with. New PC only shows 1 song (recent purchase) so am worried about syncing to new PC in case I lose the list on my iPod, which is still intacted. How can I transfer my list to new PC?
I'm having a similar problem, but I do have the key and is not working anyway.
My old pc was running on windows 7 and my new one is an apple running on Lion.
My phone is an Iphone IV and I can see all the bookmarks there.
In order to sync, what I did was click on the "I don't have the device with me", I entered the key that was provided and the process finish ok. It says congratulations, etc, etc.
But the bookmarks are not there, I tried merging data and replacing data on this computer options but is the same.
Any suggestions? -
My iPhone 5 is not showing up in iPhoto over WiFi.
Is this normal?
Or will it only show up when I connect with USB ?It will show up, when connected directly by USB as a camera.
-
I restarted my computer, but the screen only shows a flashing folder icon with a question mark. What to do?
It means that the system boot directory can't be found.
See this support article for suggested actions
Also see this discussion. -
I updated my ipad 2 today with ios 702 and now my ipad has crashed only showing a itunes logo and a charging cable pidtogram on a black screen, wont turn on. Any help appreciated?
iPad is in Recovery mode.
Hold the Power button and Home button at the same time, keep holding, when you see the white apple logo appear and then let both go. Let it start. -
I updated I tunes today , now I am unable to open my I Pod I Touch, the screen shows the I Tunes logo with a USB cord and arrow pointing back up to the icon, can't access my Home page
The screen indicates that your device is in recovery mode. It has to be restored by connecting it to a computer with itunes. Restore to factory settings.
This happens sometimes. Hopefully you have a backup.
HTH -
Continuos play of TV shows on the iPad 2 with the new iOS 7 update
Why can't you do continuos play through a TV season with the new IOS 7? Am I missing something or did I accidentally turn something off during the update? This was a great feature for my kids on long car trips. Is there a way to get it back?
If your touch screen isn't working you can't disable find my iPad to do a full restore so this is what worked for me
Try logging into iCloud on another device then go to find my iPad , erase device and then set up as a new device (not a restore backup ) This worked for me and saved taking it to the shop for repairs
Worth a try
Good luck
Mike -
Potential connection problems with the new 27" Apple displays
I'm thinking about purchasing the new 27" Apple displays and I would like to be able to run two of them at once with full 2560 x 1440 resolution. I know that the mac mini display port can output the resolution but does the HDMI port output that rate? I thought HDMI is capped out at 1080? So, if it is possible, does anyone manufacture the adapters needed? And lastly, would it be possible to also run an older (see my specs) Mac Pro with two of these screens? What kind of adapters would be needed for that? Has Apple just decided that one monitor is all anyone will ever need and that they are no longer going to support the older DVI connectors? Thanks.
To steer us back to my original post: I was asking specifically about the mac mini and the new 27" display. If you have any of the older mac models most of them support dual dvi. The newer mac mini only supports one display port and one HDMI port. I believe that the highest resolution that HDMI 1.3 supports is 1980 x 1200. My understanding is (after some research) that there is HDMI 1.4 protocol already developed that supports higher resolution but this has not been widely implemented yet. Also, my other concern was the connectors on the new display. Only the mini display port with a male end. This almost guarantees that you will need some sort of cable/connector to anything except the newer macbooks. Just some observations - that's all.
-
Why i cant log in with my new id apple ?
I was in mexican store , and then i was thinking about a new id apple , so i made it but in safari .
Thats why i cant log in ?
Help !,,,,,,,!Lalo1023 wrote:
I was in mexican store , and then i was thinking about a new id apple , so i made it but in safari .
Thats why i cant log in ?
Help !,,,,,,,!
Wow, talk about being all over the place.... Did you try Settings>iTunes & App Store. Tap on your old ID and sign out and them sign in with the new ID? -
Two days ago my phone locked up and when I could access again, my contact list was only a few names and email addresses. ALL phone numbers wiped from the phone. I have been using google sync for three years to sync contact and calendar to gmail and then sync gmail to iphone, and it has been seemless. I would think this was the problem, however the contacts and phone numbers that were added directly the phone are no longer on the phone either....which point to a phone problem.
I went home, to update but ended up having to "restore" from backup, which I did. The contacts were visible for less than 24 hours, but then disappeared again the next day. I have tried forums for google sync as that would solve a large amount of the contacts, but I still can't seem to find a solution for the other contacts added directly to the phone.
are there any new glitches/issues with the iOS 6 that cause this problem?
phone is 3GS.
thanks.Do the numbers still exist in your google contacts?
Google recently terminated support for new configurations of gmail using Exchange Active Sync for unpaid accounts. In theory, existing configurations will continue to work, but there have been some problem reports.
I've seen several mentions of the problem you describe in the last few days and so far, they've gone unresolved as far as I can tell. The root cause may be in google's termination of AES support.
Facebook contact sync may also be a suspect. -
I did put it in rice the first and second night. I also have plugged it into iTunes and restored it. Now it won't sync.
Plugging it in and trying to turn it on before it was completely dried probably fried it.
Take it to an Apple Store, but warranty won't cover it, so be prepared to buy a new phone. -
I need help getting my phone to work!!!!!!
Your device will need to be placed in recovery mode prior to restoration. Please this article explaining how to get your device in recovery mode.
http://support.apple.com/kb/HT1808
good luck. -
I have been trying to add additional picture albums to my apple TV menu so that we can view then on our TV but not sure how to do that as when I turn on the Apple Tv control the album I thought I added doesn't show up. Could use some help telling me how to do this and also to remove the older albums.
You can use the shift key to select all of the songs on the album and then drag and drop them onto your iPod. Rerfer to this thread for instructions on how to view the side bar.
https://discussions.apple.com/thread/4597562?start=0&tstart=0 -
New 1080 apple tv .. Dark picture. Rgb PC levels only
The new apple tv isn't allowing me to change the HDMI video level (hdmi high / low in the settings menu)
Pretty sure it's only outputting PC levels.. which is creating a dark picture.
Tv settings are calibrated to HDMI Video levels as they should be.
Bluray and Roku box are displaying properly, but new Apple tv 2 is not.
Tried different resolutions.
-Panasonic Plasma through Hdmi/dvi cable .I have the Apple TV 1080p with a panasonic plasma - G10 series. I have 4 choices of HDMI output - Auto, YBrCr (or something like that), RGB high and RGB low. I could barely tell the difference when I selected each of these. I thought the color and brightness were off a bit so I ended up toning down the brightness and contrast on the TV and choosing a cool color setting. The THX setting on the TV made the picture from the Apple TV pretty dim. I've left the Apple TV HDMI output as Auto.
-
HT201363 'hello i am having trouble with a new iPod apple id.
hello i don't rember my security questions and i don't rember them and the email it is being sent to is vary old and i don't rember that email but i have my phone# on the account and was wondering do it that way?
See Here. Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...
Or Email Here > Apple Support iTunes Store Contact
Maybe you are looking for
-
Illustrator CS4 Mac crashes immediately at startup
Hi all, i've got a problem with the Creative Suite 4 (not only Illustrator) and hope, you can help me. My machine is a Macbook late 2007, 200GB HDD, 4GB RAM, C2D 2.2 with Leopard and every Update installed. I've installed the CS4 and from day one I w
-
Changing Audio Language in Netflix (Latin America)
Hi all, I´m having issues with Netflix in Latin America from an Apple TV. Many movies have three languages (spanish, english and portuguese) and depending the availabitty it starts by default in spanish. I prefer english but i can´t find the way to c
-
Just showed up today. Near teh middle of the screen an odd small rectangle in on teh screen, regardless of what window is open it is always on top and has a small black shadow on screen. whats the deal?
-
Dynamic setting of cell attributes in Table Controls
Hi everybody, I would like to set dynamicly wheather a cell or a line in a Table Control is only for output or ready for input. I know how it works with columns, but nothing is said about cells or lines. Thanx for clues. Greets Olaf
-
i downloaded a music video from itunes and the video comes up, but no sound, y not?