HDMI suddenly non functional on S531

Hi I'm using a S531 for presentation work. It worked excellent until a few days ago. PC and Projector don't recognise each other anymore.
The beamer and cables are fine as another laptop does work. I know how to switch to the beamer (Fn+F7) and stuff like that. As said I'm using this machine for almost a year without problems for this kind of work.
The only thing I know is that I've run some Lenovo suggested updates about a week ago. That's about the same time the problems started.
Is there any way to switch on/off HDMI support that might interfere? Does anyone have some ideas what other issues might cause this problem?
Any suggestion is very much appreciated and welcome.
Running Windows 7 Professional
Regards,
Anthony.

Hi,
I've booted the pc from a Linux based USB and checked the HDMI port.
Under Linux it worked well. So after that I did a roll back on Windows
to a day before I started experiencing the issue. Actually that didn't
solve the problem right away. I forgot about the issue for a few days
and connected my pc to the beamer without thought. Suddenly it worked
again.
My best advise is to boot a Linux distro and check your HDMI port for
hardware failure. I would not suggest upgrading any drivers actually
because for me that's when the problems started.
Good luck!

Similar Messages

Command Key Suddenly Non-functional

I'm not sure how it happened, but all of a sudden I'm no longer able to use my Command key. When trying to enter in shortcuts like Command+T in Safari, all that the computer recognizes is the "T" keystroke.
Is there anything I can do to fix this, or will I have to take it in to an Apple Store? Thanks!!

Well unfortunately I do not know what "whatnot" means so I will ask, have you tried booting the computer into another User Account to determine whether the problem is with your normal account or with the System software other wise?

Ultrabase Suddenly Non-Functioning; Strange Lighted Dock Indicators

X200 w/ Ultrabase on Win7. Worked fine this morning. Disconnected x200 from docking station properly this morning and hibernated, as usual. Returned, dropped x200 into docking station:
Not Working:
- external mouse
- external keyboard
- docking station speakers
AND - on the left side of the docking station, where the un-dock lever is, all three lights are lit: green arrow left of undock button, green arrow right of undock button and red stop indicator right of undock button.
I've performed a variety of reset functions: restarted, shutdown, unplugged keyboard/mouse [they work when plugged directly into x200] - all to no avail.
I've just seen that a BIOS upate came out in December 2010, so I'm off to upgrade that, but really can't see that it would cause this freakout. HELP!
UPDATE 1:
Updated BIOS [3.17] - no change.
Further details:
-apparently the docking station is simply not supplying power to the ports since
--no lights on keyboard
--cd drive not functioning
UPDATE 2:
Apparently it is a power issue. Passthrough ports [monitor] work fine, but those requiring power do not. I removed the battery from the X200 then docked to ultrabase - booted up and all peripherals work. What causes such a problem?
Solved!
Go to Solution.

After booting up w/o the battery in the X200, I shutdown. Then slipped the battery back into the X200, started up and all is golden. Crazy! Hopefully this does not become a regular occurence - my hair may go white even faster than it is already!

Click links & right mouse button copy suddenly stop functioning. Closing Firefox no longer actually closes the browser without restarting the PC. What gives?

Whether in open or private browsing, Firefox suddenly becomes non-functioning, as noted. (Seemingly) closing the browser to run CCleaner, the popup tells me I must shut down Firefox to clear the cache. Only remedy: restart the computer to reset.
Avast is my antivirus; I also run Ad-Aware, Spybot, Spyware Blaster and -- manually -- Malwarebytes. The latest quirk: running CCleaner's registry scan, "unassociated" .tif/.msn OpenFilesWith errors issues appear daily.
I've been in the middle of making an online reservation or payment, only to find the print confirmation link unresponsive; ditto for right-click, which produces an empty dropdown window (leaving me with only a select text, Ctrl C option to paste to an email.
Help!

Hi Kossa,
You can also check if the issue occurs in
Clean Boot. If the issue disappears in the Clean Boot environment, you can continue to narrow down which entry is causing the issue.
Besides, uninstall it and re-download
a fresh copy of FireFox to check the result. If the issue still exists, create a new user account to see if it occurs.
If the issue persists, you can contact Mozilla Support directly and use Internet Explorer (IE) during the time.
J
Please Note: The third-party product discussed here is manufactured by a company that is independent of Microsoft. We make no warranty, implied or otherwise,
regarding this product's performance or reliability.
Regards,
Linda

S10 HW 1/06, bge driver non-functional

Hello,
I'm having a problem with a new installation of Solaris 10 (HW 1/06) on a Fujitsu Siemens ESPRIMO P5905. It's a fairly new model x64 box. The system installed fine, but the on-board Broadcom Gigabit Ethernet is non-functional. I've tried both the Broadcom bcme driver and the Sun bge driver, plus I've installed the latest patches from Sunsolve (118844-30, 122028-02) with no luck. The system finds the card and appears to receive packets but not send.
Is there any way I can report a bug without a Support Contract from Sun?
The card is an on-board PCI-E chip and works fine under Linux 2.6 or Windows Server 2003. The PCI ID is pci11e4,1677 which is listed in /etc/driver_aliases for the latest (patched) bge driver.
One other detail are the following messages from the bge driver on load:
ddi_intr_get_supported_types(): Returned 3
Using legacy interrupt type
bge_add_legacy_intrs
Thanks in advance for any help...
-mato

Hello,
I'm having a problem with a new installation of Solaris 10 (HW 1/06) on a Fujitsu Siemens ESPRIMO P5905. It's a fairly new model x64 box. The system installed fine, but the on-board Broadcom Gigabit Ethernet is non-functional. I've tried both the Broadcom bcme driver and the Sun bge driver, plus I've installed the latest patches from Sunsolve (118844-30, 122028-02) with no luck. The system finds the card and appears to receive packets but not send.
Is there any way I can report a bug without a Support Contract from Sun?
The card is an on-board PCI-E chip and works fine under Linux 2.6 or Windows Server 2003. The PCI ID is pci11e4,1677 which is listed in /etc/driver_aliases for the latest (patched) bge driver.
One other detail are the following messages from the bge driver on load:
ddi_intr_get_supported_types(): Returned 3
Using legacy interrupt type
bge_add_legacy_intrs
Thanks in advance for any help...
-mato

I have a PowerBook G4 with a non-functioning monitor. It used to work with an external monitor, but I reinstalled the OS, which cleared the display preferences and now when I restart it won't detect the external monitor. How do I fix?

I have a PowerBook G4 with a non-functioning monitor. It used to work with an external monitor, but I reinstalled the OS, which cleared the display preferences and now when I restart it won't detect the external monitor. This means I can't use the computer anymore. How do I fix? I tried using the Command+F2 keyboard shortcut, but it doesnt' work. It's possible that since I reinstalled the OS, it still needs to be set up, so there's only a welcome screen (but since I can't see it I'm not sure).

There is no limit to the number of times you can re-install Office on the same computer.
You can activate by telephone:
The last paragraph is the relevant bit

I am having serious issues trying to alter my old iCloud account with an old non-functioning email to my new apple id with a new email address. The message keeps coming up on all my apple products with my old email (which is not available anymore).

I am having serious issues trying to alter my old iCloud account with an old non-functioning email to my new apple id with a new email address. The message keeps coming up on all my apple products with my old email (which is not available anymore).

I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
The old email address no longer exists - I haven't used it in a year probably and I no longer have the account. I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there. On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back. Every 2 seconds I am asked to log in using the old non-existent email. The device is currently useless.
The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

DVD Drive Non-Function Mac Mini 3,1 (late 2009)

Hi
The DVD drive in my Mac Mini has recently become non-functional, "About this Mac" sees the drive fine,
OPTIARC DVD RW AD-5670S:
Model:          OPTIARC DVD RW AD-5670S
Revision:          2AHI
Native Command Queuing:          No
Detachable Drive:          No
Power Off:          No
Async Notification:          Yes
Bay Name:          Upper
But when you insert a disc there is no response, it does not see to attempt to read it just ejects after about 20-30 seconds.
Any suggestions as to what could be the problem? This issue started sometime after I upgraded the memory, but I cannot be sure that the two things are connected as I very rarely use the DVD drive and the first time I tried to use it was several months later.
Many Thanks

Optical drives are pretty short lived in my experience.
Might try a cleaning Disc.
Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/HT1379
In fact, do 3 in a row, takes a bit of time.

How can I include "None" functionality in a LOV

I am trying to setup the ability to set a value to null in a Popup LOV giving my users the None functionality. This is the SQL I use to ccreate the LOV:
select 'None'VALUE,
Null UID
from dual
UNION ALL
select VALUE,
UID
from LOOKUP_VALUE
when I select the None from the list and try to create the record I receive:
ERR ERR-1023 Unable perform validations
ORA-01722: invalid number
Any idea on how to allow None type functionality?

Thanks Sergio;
You are right I am trying to insert a NULL into a number column. When I add a row and do not put a value in this column it is ok because the column is defined to allow nulls. If I put a value in this column and later want to change the value nothing (NULL) is when I have the problem. I could create a None value for all my LOV and use it but I would rather just remove the value from the column and leave it NULL.
Chris

System Preference Panes non-functional (some)

I am "fixing" a friends MacBook Pro as a favour, and she's getting exactly what she paid for. It may be a few years old - not sure. It's running Snow Leopard, 10.6.8, but I'm putting it in this more general section because it may not be SL-specific.
A few of the System Preferences panes don't work. A message comes up which simply says "non-functional" or something like that. Specifically, the ones whcih don't work are:
Desktop and ScreenSaver
Spotlight
Energy Saver
Background: she forgot her password, and this is on a computer which was formerly someone else's. I couldn't even get the thing to the login screen, so something else was wrong besides her password, but I had her gray Snow Leopard installation disks, so got through the re-install process, made a new User for myself, as Administrator, and was then delighted to find that all of her data was still intact. I had to add myself in to the permissions on her UserID. I made a new user for her as well, because we still didn't have her own original password, and I looked around but couldn't find it. I copied all of her data over to her new UserID.
I also did all Updates, plus tried a 10.6.8. combo update.
Then I made an error. The former owners UserID was also still there. We couldn't log on as her either, without her password, but I figured that we didn't need that anymore, checked with the current owner first, and deleted the original User (and renamed the computer). I cannot reconstruct in my mind whether the System Preferences panes malfunction occurred before or after deleting the original User.
There is other minor wonkiness, but basically the machine is running and the data has been preserved (and now backed up). But one thing at a time: I've reinstalled the OS a couple of times, without improvement. I tried to upgrade to Mavericks, but after downloading, it told me that this computer could not be upgraded (without saying why not).
I haven't found any plist files which look relevant. I did more 2 of them out of HD-Library-Preferences, without any effect, so put them back. I find the Preference Panes in System-Library-PreferencePanes, but didn't see anything to do about that. The offending panes look like they're at least present.
Is there something simple I'm missing? Can I get those panes back?
Thank you.
Charles

Macbook pros need to be at least 2009 for 13" and 2007 for 15" and 17" to run Mavericks. see system requiements.
At this point, the easiest solution will be to make your backups current, then wipe the drive and do a clean install of the system. That means more work reinstalling the backed-up data (you only want to restore data and third-party apps, not any of the system components), but it makes sure you get a clean, working copy of the system.

Home Page Search Is Non-Functional / Not Possible to Restore Previous Session

After the latest update (to version 29), Firefox's default home page search bar has been completely non-functional. Whether I type enter or press Search, nothing happens. Another (possibly related) problem is that the "Restore Previous Session" button is never present. I also cannot restore the previous session by clicking on the History option (it is always greyed out).

I had this and other problems with v29. But after a while everything was working
again, I hope. BTW; 
I found that after Firefox v29, a LOT of my settings and add-ons were changed /
reset. Try this;
'''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]'''''
 While you are in safe mode; 
'''''Firefox Options > Advanced > General'''''. 
Look for and turn off '''Use Hardware Acceleration'''.
Check ALL of your setting. Then restart.

Wired interface non-functional

So I have a most unusual problem with a mac mini server that is driving me banana's that I hope someone in the Apple community has run into, and found a decent solution..
The mac mini (2.3GHz quad core i7, late 2012) is running 10.9 and server 3.0.1. I did an upgrade from 10.8 (and whatever the previous version server was)..
Since then the wired ethernet interface (en0) literally stopped working. (Links up, but no connectivity.. no ping, it does not even send an ARP)
Data points about the problem.
- It worked flawlessly up until the upgrade to 10.9.
- wireless interface is still fine, static or dhcp.
- The IP is statically configured via System preferences - Network.
- ifconfig in terminal show NO IPADDRESS assigned to the interface.
- if I reconfigure the interface to DHCP, it will not receive an IP and ends up with an APIPA address..
- if I go into terminal and 'ifconfig en0 down' then 'ifconfig en0 <IP> up' the interface works again until restart. It will also correctly display the IP in terminal.
- If I reset, it goes back into this same state (network preferences shows proper config, ifconfig does not, and the interface is non functional)
- If I then go to cli, and manually ifconfig down then up, all is good again.. Doing so from system prefs has no affect..
Here is where it gets really interesting, and why I am convinced this is a software issue.. I did a clean install of 10.9 and Server on an external USB disk, and things work exactly as expected if I boot from that Volume.. If I boot from the internal drive, Its in the broken state again..
This absolutelty tells me its some kind of software issue, and I am out of ideas short of wiping the internal drive, and reloading all the data from scratch..
Anyone else run into this? If yes, were you able to fix it without wiping/reloading?

First, thank you for taking the time to respond and offering great ideas..
I'd delete the interface & recreate it.
In 'System Preferences > Network tab' select the ethernet, click the - button. Then add it again. Reboot & see if it has any effect.
- Had no affect.. More accurately, it works the same as doing ifconfig down/up in cli, where the interface will work again until the next reboot.
See what appears in Console (Spotlight search for it) in the 'All messages" section when you remove connect the ethernet.
- Log messages are below.. Interestingly, I do not get the failure messages that I have highlighted in red on another machine that is is also running 10.9, with server loaded.
11/23/13 10:14:36.000 AM kernel[0]: AppleBCM5701Ethernet [en0]: Link down (womp disabled, proxy idle)
11/23/13 10:14:37.135 AM configd[24]: network changed: v4(en1:10.1.10.10, en0-:10.10.10.1) DNS Proxy SMB
11/23/13 10:14:52.000 AM kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, EEE enabled, Debug [796d,0301,0de1,0300,cde1,7c00]
11/23/13 10:14:52.418 AM configd[24]: arp_client_transmit(en0) failed, Device not configured (6)
11/23/13 10:14:52.419 AM configd[24]: MANUAL en0: arp probe failed, arp_client_transmit(en0) failed, Device not configured (6)
11/23/13 10:14:56.501 AM ServerEventsDaemon[221]: NetworkConfiguration: Handling network change.
Have you tried changing the port on the switch it is connected to?
- Yes, for ease of testing I have it plugged directly into my MacBook Pro (I also tried new cable first )
Does safe mode have any effect?
- No, Same results.
Again, booting the machine from a clean install on a USB disk, does not show the issue.. I’ve got a lot of data on the machine, so I am doing anything I can to avoid wiping and reloading it all.. Ive added the output of etrecheck, in case its of any help.
Hardware Information:
 Mac mini (Late 2012)
 Mac mini - model: Macmini6,2
 1 2.3 GHz Intel Core i7 CPU: 4 cores
 16 GB RAM
Video Information:
 Intel HD Graphics 4000 - VRAM: 1024 MB
Audio Plug-ins:
 BluetoothAudioPlugIn: Version: 1.0
 AirPlay: Version: 1.9
 AppleAVBAudio: Version: 2.0.0
 iSightAudio: Version: 7.7.3
Startup Items:
 ChmodBPF - Path: /Library/StartupItems/ChmodBPF
System Software:
 OS X 10.9 (13A603) - Uptime: 0 days 0:4:7
Disk Information:
 APPLE HDD HTS541010A9E662 disk0 : (1 TB)
 EFI (disk0s1) <not mounted>: 209.7 MB
 Macintosh HD (disk0s2) /: 999.35 GB (928.22 GB free)
 Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
 Apple Inc. BRCM20702 Hub
 Apple Inc. Bluetooth USB Host Controller
 Apple, Inc. IR Receiver
 Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)
 Dell Dell USB Keyboard
FireWire Information:
Thunderbolt Information:
 Apple Inc. thunderbolt_bus
Kernel Extensions:
 com.logmein.driver.LogMeInSoundDriver (1.0.2)
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
 [loaded] com.adobe.fpsaud.plist
 [loaded] com.enterasys.NacAgent.plist
 [loaded] com.google.keystone.daemon.plist
 [not loaded] com.logmein.logmeinblanker.plist
 [loaded] com.logmein.logmeinserver.plist
 [loaded] com.logmein.raupdate.plist
 [loaded] com.parallels.desktop.launchdaemon.plist
 [loaded] org.macosforge.xquartz.privileged_startx.plist
Launch Agents:
 [loaded] com.google.keystone.agent.plist
 [failed] com.logmein.LMILaunchAgentFixer.plist
 [loaded] com.logmein.logmeingui.plist
 [loaded] com.logmein.logmeinguiagent.plist
 [not loaded] com.logmein.logmeinguiagentatlogin.plist
 [loaded] com.parallels.desktop.launch.plist
 [loaded] com.parallels.DesktopControlAgent.plist
 [loaded] com.parallels.vm.prl_pcproxy.plist
 [loaded] org.macosforge.xquartz.startx.plist
User Launch Agents:
User Login Items:
 iTunesHelper
 smcFanControl
 Dropbox
3rd Party Preference Panes:
 Flash Player
Internet Plug-ins:
 Default Browser.plugin
 Flash Player.plugin
 FlashPlayer-10.6.plugin
 googletalkbrowserplugin.plugin
 LogMeIn.plugin
 LogMeInSafari32.plugin
 npgtpo3dautoplugin.plugin
 o1dbrowserplugin.plugin
 QuickTime Plugin.plugin
User Internet Plug-ins:
Bad Fonts:
 None
Time Machine:
 Auto backup: YES
 Volumes being backed up:
 Macintosh HD: Disk size: 999.35 GB Disk used: 71.13 GB
 Destinations:
 Backups [Network] (Last used)
 Total size: 999.18 GB
 Total number of backups: 14
 Oldest backup: 2013-11-23 01:19:19 +0000
 Last backup: 2013-11-23 14:59:37 +0000
 Size of backup disk: Adequate
 Backup size 999.18 GB > (Disk used 71.13 GB X 3)
 Time Machine details may not be accurate.
 All volumes being backed up may not be listed.
Top Processes by CPU:
 9% 35FC0000
 3% mds
 3% WindowServer
 2% 36000080
 1% syncdefaultsd
 1% EtreCheck
 1% postgres: caldav postgres [local] startup
 1% fontd
 0% SubmitDiagInfo
 0% prl_disp_service
Top Processes by Memory:
 147 MB com.apple.IconServicesAgent
 82 MB Dropbox
 82 MB com.apple.WebKit.WebContent
 82 MB Safari
 82 MB Finder
 66 MB mds_stores
 66 MB CalendarAgent
 66 MB CalendarServer 5.1 (Apple Calendar Server 21.17.39) [Agent]
 49 MB mds
 49 MB soagent
Virtual Memory Statistics:
 11.80 GB Free RAM
 2.69 GB Active RAM
 436 MB Inactive RAM
 1.08 GB Wired RAM
 258 MB Page-ins
 0 B Page-outs

K8N Neo4 (MS-7125) USB, Mic, S/P Out, and LAN ports all non-functional

I'm hoping someone can give me a hand with this. I'm not a novice when it comes to motherboards but this particular board is making me feel like it.
Ok, I've got a K8N-Neo4 MS-7125 model. Athlon64 3700. I have all the current drivers and ran the liveupdate to make sure.
The LAN port will light up, but the Device manager will not recognize it, nor will the LAN utility.
The board has 4 USB ports. The top two are non-functional, the bottom two work.
The S\P OUT port has never worked, nor do I know how to engage it or find it on the device manager
The microphone....this one is fun. Its like the microphone is stuck in a feedback loop. Whatever comes through my speakers, is heard on the other end by other users. I am not heard at all, although I can hear myself through my OWN speakers. Even with the mic unplugged, people still can hear my speakers. Imagine having your speakers plugged into the mic jack. The only way to kill the feedback is to actually go into the sound manager and mute the whole mic system.
I can live without the LAN and USB ports, but it would be a HUGE help if someone can help me with the mic and S\P ports!!
Thanks!!!

Ok, I'll do my best to remember everything
Athlon64 3700 939socket
XP Pro Service pack 2
Rosewill case 400watts
SonyDVDRW Drive (dual layer)
Samsung DVD drive
GEForce 7300 256DDR (PCI Express)
120GB Seagate 7200 RPM Harddrive (IDE) Partioned two drives
1x512DDR ram PC3200 400mhz
As for the flavor of the NEO4 the only other numbers I know of, is on the board it says N1996 right below the processor. Is that what you need? Its a PCB V.3 board nvidia Nforce4.
Speakers are standard cyber acoustic
Logitech Mic/Headset combo
This particular case allows for hookups for headphones and mic in the front. The case has jumpers in the back that allow you to gain access from the front (but you probably already know that). I've always used the front MIC/Headset jack, and I have a splitter in the back for the headphones and that jumper. In trying to resolve the issue, I tried every jack with the microphone (even the ones that I know are labeled as speakers). I do get my own voice through MY speakers on the front jack AND the mobo jack.
Hopefully I got you enough info!
Thanks in advance!!!

I have a 60G classic with a non-functioning center select button. Can I set a specific playlist and change settings by hooking up to my PC and then maintain those settings and that playlist once I go remote?

I have a 60G classic with a non-functioning center select button. Can I set a specific playlist and change settings by hooking up to my PC and then maintain those settings and that playlist once I go remote?

I'm having a little trouble understanding the part about your password having to be reset. Why is that happening??
Let's start with Firefox's settings:
(1) You can configure the password manager feature on this tab:
orange Firefox button (or Tools menu) > Options > Security
There is a checkbox to enable/disable the feature.
There also is a "Saved Passwords" button to review and remove any passwords you do not want Firefox to keep.
That tab also has a feature to set a Master Password so that no one can use your saved passwords without knowing the Master Password. You may need to exit Firefox in order for Firefox to ask for that again.
Related articles:
* [[Password manager - Remember, delete and change saved passwords in Firefox]]
* [[Use a Master Password to protect stored logins and passwords]]
(2) Site-specific permissions
If you want to use the password manager for other sites but NOT a particular site, you can configure that in the Permissions Manager.
In a new tab, type or paste '''about:permissions''' in the address bar and press Enter.
After the page loads, use the search box in the upper left corner to narrow down the list to the site you want to configure. Highlight the site on the left side, and on the right side, choose Block under Store Passwords.
(3) Form autocomplete suggestions
Separate from passwords, Firefox remembers entries you've made into forms (in most cases) and lists the matching ones below the form field in a drop-down.
To clear a suggestion, press the down arrow key to highlight it and press the Delete key.
To turn off this feature, see this article: [[Control whether Firefox automatically fills in forms with your information]].
To review and selectively edit or delete form history entries, you need an add-on. For example, you could try this one: https://addons.mozilla.org/firefox/addon/form-history-control/

GL: Import Journal only accept those non-functional currency

Hi,
I have tried to run import journal using Oracle General Ledger. However, I found that there is always an error 'EC08 - Invalid currency code' when the records contains functional currency code, e.g. HKD. For all other currencies, like JPY, i.e. non-functional currency, the import journal can then be completed successfully. Kindly please explain how to import journal successfully from the data containing the functional currency, like HKD in the Oracle General Ledger module. Many Thanks.
Please e-mail answer to [email protected]
Thanks in advance.

Hi,
I have tried to run import journal using Oracle General Ledger. However, I found that there is always an error 'EC08 - Invalid currency code' when the records contains functional currency code, e.g. HKD. For all other currencies, like JPY, i.e. non-functional currency, the import journal can then be completed successfully. Kindly please explain how to import journal successfully from the data containing the functional currency, like HKD in the Oracle General Ledger module. Many Thanks.
Please e-mail answer to [email protected]
Thanks in advance.

HDMI suddenly non functional on S531

Similar Messages

Maybe you are looking for