HDMI to DVI to VGA to Monitor?

I just purchased a Mac Mini and totally forgot that Apple upgraded to Mini DisplayPort (I still have the mini-vga to vga cable on my MacBook).
So what next? Do I have to buy a Mini DisplayPort to VGA adapter? Or can I somehow hook up the Mini to my VGA monitor with the HDMI to DVI adapter that I got in the box?
Also, I have one of these, but it doesn't seem to fit in the DVI:
http://i.imgur.com/oJpkr.jpg
Do I have to get one of these?
http://dmmsupport.com/modules/KB/Image/Image/Accessories%20-%20images/DVI_adapte r.jpg
Thanks!

Hi,
*Can the HDMI port drive analog displays (VGA displays for example) using adapters?*
+No. The HDMI port will drive digital connections—such as DVI—using the adapter that came with the Mac mini, but cannot be used for analog displays such as VGA. You can purchase a Mini DisplayPort to VGA adapter separately to drive analog displays.+
Taken from the HDMI FAQs here http://support.apple.com/kb/HT4214
Regards
Stefan

Similar Messages

I need to connect an HDMI outlet to a VGA-only monitor.

I need to connect an HDMI outlet (on a video recorder) to a VGA-only monitor, so that I can run my new Mac mini and the recorder to the same monitor. The adaptor supplied with the Mac mini is HDMI to DVI-D and I also have a cable from the Mini DisplyPort to VGA. This works well with the Mac mini to the monitor. Can I get an adaptor or cable to connect an HDMI male to a Mac DisplyPort female?

I need to connect an HDMI outlet (on a video recorder) to a VGA-only monitor
<http://www.sabrent.com/category/tv-video-capture/DA-HDVG/>
Can I get an adaptor or cable to connect an HDMI male to a Mac DisplyPort female?
Yes, but it for Mini DisplayPort displays, not VGA displays (even with adapters).
<http://www.kanexlive.com/xd>

DVI to VGA adapter, monitor says "input not supported"

I have just received my MBP yesterday and, when I attempted to attach it via DVI to VGA adapter to my Acer AL2016W flat panel LCD, the monitor told me "input not supported". I was under the impression VGA is VGA is VGA. Perhaps I am mistaken. There is no DVI port on this monitor so I am, essentially, screwed ATM unless I purchase yet another monitor - this one is less than a year old. I require my MBP to be attached to an external monitor due to a disability, and am not sure what to do. I don't believe it to be an isolated issue, especially after viewing some of the other posts about the graphics card being an issue as well. I wish Apple would come forward with a resolution. I realize this issue has probably been posted somewhere already, however I am unable to sift through all the posts due to the aforementioned disability and inability to attach to external monitor. I just can't sit here for that long, so I offer my apologies.

First off, are you connecting in the proper sequence? That is:
1. MBP and monitor powered on
2. connect monitor's VGA cable to the DVI-to-VGA adapter
3. connect DVI-to-VGA adapter to the MBP's DVI port
In that way, the MBP should autodetect the monitor and set the resolution appropriately. Else, the output resolution of the MBP may not suit the monitor, and the monitor will give a "not supported" error.
As a side note, have you considered the options in System Preferences > Universal Access? Options include Zoom, VoiceOver (spoken screen selections), making the cursor larger, and other enhancements for the visually impaired.
Hope this helps...

G4 12" mini DVI to VGA external monitor does not display

I have hooked up the mini adapter cable and hooked up the VGA cable to a Dell P780, which the apple recognized. The monitor acts like it is going to come on, but then appears to go into sleep mode... The G4 is functioning as if the monitor is working.
I hooked my PC to the monitor, and it works fine.
I have tried two different monitors.
I have reset the PRAM and NVRAM...
Before I set it on fire, HELP.

Are you using the mini DVI to DVI followed by a DVI to VGA adapter? That may not work if the mini DVI to DVI adapter does not pass analog video. If that is the case, you need the mini DVI to VGA adapter:
<http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wo/2.RSLID?mco= 17927D0B&nplm=M9320G%2FA>

G5 DVI to VGA Dell Monitor Connection problems, need help!!!!!!!!!!!!!!!!!!

hello,
I'm running two dell monitors both of which were connected via DVI to my g5 quad dual dvi. My tv broke and I'm using one of my monitors to connect the cable boxes HDMI input to the dells DVI input, it works great.
My problem is that i still want to run two monitors from my mac and still be able to switch channel sources from the Dells source button allowing me to switch from TV to Mac. Since I took up the dvi port on one of my monitors to connect to the cable box via HDMI, I have a free DVI cable. I purchased a tiny converter that allowed to change one end of the free DVI cable to VGA. I used this method to connect the cable to my g5's dvi port and the configured end to the VGA port on the monitor with no luck.
The Dell monitor does not pick up any signal and just goes to sleep as if my computer does not exist. The TV works fine and I'm able to switch sources. Please note that I'm not using the DVI-VGA adaptor that came with my g5 and don't know if this would make a difference. If it does, how do i set this up because this adaptor is like 5 inches long.
Does the adaptors DVI end need to be connected to the back of the g5 or does the VGA end need to be connected to the monitor or does it not matter. I need a longer dvi-vga cable as well, do they make them. This all depends if the problem actually is that that I'm not using the DVI-VGA cable that came with my mac to connect to the monitor in the first place.
Can anyone help me out here. I'm using the Dell 2208WFP Ultra Sharp.

Bad adapter?
The G5 ports are DVI-I. Any good DVI-I to VGA adapter should be fine.

How do i use Desktop PC (Mini Hdmi or DVI) to imac27 as monitor

How do i use Desktop Pc through imac27 as monitor? first of all i dont want to use bootcamp. cos it dont run high end game, this is a reason i want to use my pc .
my Graphics Card use Dvi or mini Hdmi, so which kind of Adapter to use and want full Resolution.
Thx.
p.s sry english not my first.^^)

First of all, what do you mean by plug in one set of speakers on your PC? if am not mistaken the card has 3 plugs for a default 5. surround sound. Yes your card can do 5. surround soud, but for that you need to have the 5. surround sound speakers, otherwise well it won't be 5. To get any audio from your TV, or Satelite Box, you need these items and ste
ps.
Make sure your TV or satelite box has 2 RCA's female plugs labeled (Output) to deli'ver the sound to another device *(from your Satelite or TV to the now dead 5. surround sound)? 2. Your computer must be on at ALL times to transmit (or play) the sound from your TV or satelite box. 3 you need a?Y?RCA to 3.5mm plug jack cable (they are at allMart or Bull'sEye stores for 2$. its a cable that has the 2 male RCA's 's white 's red at one end, the other end will have the classic headphone jack *(you can always use this cable to transmit any audio coming from any device such as MP3, CD, DVD, Laptop, TV, and many other devices to your 5. surround sound in the living room or the computer) 4. Plug the Y RCA in the input port in your Audigy2Zs sound card. Make sure the Mic, and AUX are on mute, and that the Line In volume is at 70% and your TV, Satelite Box audio is at 50%. If its too low volume watch out, you'll be controling about?4 volume settings *(the TV or Satelite Box, the Line-In, Master Volume on the sound card, and Speaker Volume) 5 Sit back and enjoy!

HDMI and DVI port not working on 880GMA-E35

Hello,
I want to use the HDMI port of my 880GMA-35, but the monitor is not getting a signal. I know that the board has two jumpers to switch between the DVI and the HDMI port. In the delivery state the jumper is set to HDMI, but I don't get a signal. There is also no signal, if I switch the jumper to the DVI pins. I have tested this setup which different cables (HDMI and DVI) and two different monitors.
After this test I get a guarantee replacement of the board. The new board is also not working with HDMI or DVI. The VGA port of the first board was working as supposed and I don't see any Bios settings to activate the monitor ports.
Are there any suggestions to solve my problem?
Thanks in advance and kindly regards
Daniel

>>Posting Guide<<
please read the above guide and follow it!
firstly we need alot more information to what componants you have in your system?
eg see my signature bellow this post for the type of information we need! main parts are:
motherboard
CPU
RAM
PSU (include the +12v ampage ratings)

How do i connect my mac mini to a kvm switch using the hdmi to dvi adapter?

I want to connect my Mac Mini using the HDMI to DVI adapter to a KVM switch cable. I have an Iogear KVM switch. The cable from the KVM switch has a male VGA end connection. I have been trying to determine the right adapter to connect the female DVI connection to the male VGA connector. I will be using the Mac mini and a PC running through the KVM switch. This is doable as the iogear switch is compatible with both a PC and a Mac. Any ideas out there? Thank you.

You would need to get HDMI or DVI to VGA CONVERTER, not a simple adopter. The converter requires USP connection for power. HDMI is only digital while VGA is analogue.
http://www.newegg.com/Product/Product.aspx?Item=N82E16812699001&nm_mc=EMC-IGNEFL 070414&cm_mmc=EMC-IGNEFL070414-_-EMC-070414-Index-_-AudioVideoSplitters-_-126990 01-L019B
If your MIni has a mini displayport or Thunderbolt port yu can get a les expensive mini displayport to VGA afopter.

Mac Mini (Mid 2011) display artifacts HDMI to DVI at native res

Hello,
I recently changed monitor configurations and in the process moved my Mac Mini (Mid 2011) to a HP LP2065 monitor. The connection is made through the stock supplised HDMI to DVI adapter.   The monitor and the DVI cable work successfully with other machines.
What occurs is only certain colors, usually black, result in the display being red and/or sparkling and/or static (like TV static) when the monitor is set at its native resolution of 1600x1200.
If I bump the resolution down to 1280x1024, or lower, the black color returns and I see no display glitches.   If I bring the resolution back up to 1600x1200, the display artifacts return.
A few google searches suggest I use a DisplayPort to DVI adapter instead as some monitors are "finicky".   Does anyone agree with that? It seems peculiar to me -- why would a digital signal have analog-looking glitches?
Any ideas welcome.. thanks for reading

Your monitor has a native pixel resolution of 1920x1200. There is no point in trying for 1080-p or -i.
I run two 1920x1200 monitors via HDMI (with passive cable adapters where necessary) and I use these choices:
...and they are both pixel-sharp, filling the screen, and yet menu bars totally visible!

Santa Rosa MBP - DVI to VGA Projector problems

When hooking up a Sharp PG M20X using a [DVI toVGA cable] and a [VGA to DVI adaptor] the MBP sees the projector, but the projector cannot see the computer.
This is a problem because, I may find myself in situations where this is the only configuration for hooking my MBP up to a projector.
Note:
1. A G4 Powerbook works fine with this configuration.
2. The MacBook Pro drives the Sharp PG M20X projector DVI to DVI - without problems
3. The MacBook Pro drives a DVI to VGA CRT monitor - using a [VGA to DVI adaptor] - without problems.
Is there a solution?
Thanks
I have a 2.4 GHz Santa Rosa C2D MacBook Pro Mac OS X (10.4.10) Sharp PG M20X Projector (DVI-input)

I think I solved this problem.
It was in issue for me. My second monitor would only display the Windows XP screen when it was loading, then it would black out. I couldn't even move my mouse arrow to the other side. Then I fixed it, here's how (running Windows XP SP3):
1. Start > Control Panel > Appearance and Themes
2. Display
3. Go to tab "settings"
4. Double click the blue image with the "2" inside it. This is the second monitor, adjacent to your first, or primary, monitor. The blue box may be a desaturated, greyish blue, meaning that the monitor is disabled. Click it and it a box will pop up asking if you want to enable the monitor. Click OK, and then like magic, your monitor is resurected in it's Windows Glory! From there, adjust the resolution, and it should work perfectly.
This isn't a Boot Camp compatability issue, it's just a problem with the lack of familiarity that users of OS X have with using XP.
Have a nice day!
Message was edited by: BlakeTron
Message was edited by: BlakeTron

DVI-to-VGA adapter disabled on HDMI-equipped monitors?

Can anyone with an Apple DVI-to-VGA adapter on a Core Duo or Core 2 Duo (both at 10.6.8, currently and probably forever) still connect to a second monitor if the monitor also has an HDMI port? I could until early 2011. From 2008 to 2010 I could connect to every VGA monitor through the DVI adapter.
I thought the DVI-out on my MBP died but got a newer MBP and it, too, doesn't work on any HDMI-equipped screens. Both computers and all my DVI-to-VGA adapters work fine on monitors without HDMI. Yes, I rebooted. No, it's not the cables. Again, all components otherwise work in other arrangements. I am not talking about any other setups. The HDMI-equipped monitors all work fine with miniDisplayPort-to-VGA plugs (today!) from newer Macs.
Any work-arounds? Anyone have a best-recommendation on an adapter that works still?

Thanks, BSteely, I have the latest QT and iTunes already. Closing the lid seems to kick the MacBook external display into some special mode that Front Row can't display videos in. For example, you get the Front Row interface, but as you select movies/TV shows, the preview window on the left side is blank. Open the cover, and have both displays going, and you can see the previews fine (and of course, you can see the movies/TV shows play fine as well when you click on them)
Running Quicktime Player full screen works fine without Front Row in either open or closed lid mode. So it is apparently something wrong with Front Row itself.

Why does a DVI or VGA look better than HDMI for 2nd Monitor

Why does a DVI or VGA connection for a program monitor look better than HDMI. I've tested this on several systems with CS5x and CS6. The full screen output from premiere definitely looks worse with HDMI.
I can often see visual differences with the Windows GUI as well, over sharpening of text and lines, harsh rendering of gradients. It looks like a VGA signal displayed on a television.
I've looked at the NVidia stetting and it appears to be set to 1920x1080 at 60hz either way, DVI or HDMI. On one Acer 20 inch monitor the was VGA, HDMI, Composite, Component, and Digital Tuner, but no DVI. The program monitor has always looked blah from the HDMI. So I recently switched the connection to a DVI to VGA adaptor, and now the video looks so much better.
Any thoughts or explanations?

Just because the monitors accept a 1080P signal doesn't mean their native resolution is 1920x1080. At 20 inch they very likely can scale that signal down to the native resolution of the panel which may be 1600 x 900 or another resolution that is 16 x 9 resolution. That scaling can be done by the GPU or firmware on the Monitor depending on the video driver options and the firmware options. That scaling is also the most common cause to text and icon blurriness you are talking about. As an example there are Pro monitors that accept a 4K signal but scale it down to 2.5K or 2K on the actual panel. You might try going into your video card settings such as Nvidia control panel and look for the scaling options. Select GPU scaling and see if the preview is better. If that doesn't work select no scaling and see if it's better if the monitor firmware handles the scaling.
Eric
ADK

HDMI/DVI adaptor to VGA on Monitor - No Picture

Same with Thunderbolt/DVI adaptor to VGA on monitor. Is it the adaptor to DVI/VGA cord that is making the problem?
System Information sees the Monitor(Sony Bravia TV)
Display Preferences sees my dual display set up
The computer acts as if I have two screens running
But no picture on the monitor with the signal path described above

Welcome to the wonderful world of copy protection.
Your display may not be on the "approved" list, or was removed from it.
Apple's newer Mac lines include a form of digital copy protection that will prevent protected media, such as DRM-infused iTunes movies, from playing back on devices that aren't compliant with the new priority protection measures.
The Intel-developed technology is called High-bandwidth Digital Content Protection (HDCP) and aims to prevent copying of digital audio and video content as it travels across a variety of display connectors, even if such copying is not in violation of fair use laws.
Apple has apparently acquired a license for the technology and is now using it across its lines to to prevent transmission of purchased iTunes content to devices that don't include support for HDCP.
The problem can often be solved by using an HDMI to Component Video adapter. Many believe that Component Video will give you a better picture than HDMI without any of the hassles of HDCP.

How do I connect Monitor without HDMI (but DVI-D) to laptop with micro-HDMI?

I have a Samsung NP900x400D-A02US laptop... the video connections are:
- a micro-HDMI
- a "monitor port" (which the manual says supports 15 pin D-Sub interface.. or you can connect VGA adapter),
I would like to buy the Dell Ultrasharp u2412M which has 1900x1200 resolution.... BUT it does not have an HDMI port. It has:
- a display port
- VGA input
- DVI-D with HDCP Input
- USB ports (but I don't think it's the kind that will allow me to hook up thge monitor to the laptop with USB)
How the heck do I connect the 2 of these... in a way that retains the 1900x1200 resolution? if I can't find a good way I might have to find another monitor with HDMI....
Thanks so much for your help! It's a bit frustrating to sort through it all....
Kathryn

I ended up finding it by item #, because I would have missed it, too. I wasn't sure if the product image was correct until I saw this:
Connector on First End: 1 x HDMI (Micro Type D) Male Digital Audio/Video
You got it figured out. Hooks up exactly like you said. HDMI and DVI will result in same picture quality, but as you mentioned, HDMI doesn't carry audio. They are the same, for all intents and purposes, in all other regards.
The DVI cable should have thumbscrews on each end, to help secure it at each end. The Adapter I linked has 'receptors' for the thumb screws, so the connection will be secure. The monitor should have the same 'receptors' for thumb screws. The weakest point of the connection, physically, will be the Micro-HDMI, so just be careful to not put pressure on that connection.

2011 Mac Mini and Acer x222w monitor incompatible? HDMI to DVI adapter issue

I am totally bummed because I just bought a new Mac Mini thinking I'd be able to use the display from my old system, an Acer x222w, which has both DVI-D and VGA connections. I hooked the monitor up using the HDMI to DVI adapter included in the box with the Mini. On boot, I could see the Apple logo, though it was not centered, and when the set up screen came up to the select language screen, it flashed quickly and then turned to snow.
I was on the phone with Apple support for over an hour trying to troubleshoot this issue. I was a little disappointed that tech support didn't even seem to be aware that the Mini came with an HDMI to DVI adapter. It was then recommended that I try an adapter for the mini display port, which the 2011 Mini doesn't have.
I was able to borrow another monitor, a Dell with DVI-D, and it worked.
I have searched for specs/requirements that might explain why the Acer monitor doesn't work while the Dell one does. I cannot find anything from Apple. I just assumed any DVI connection would work. Has anybody else encountered this problem? Most of the issues I've found on the forums involve trying to hook up to a home theater LCD TV, which I'm not trying to do. If I had known my monitor wouldn't work, I probably would have just saved up for an iMac.
Thanks in advance for any thoughts or tips!

Try resetting the SMC andNVRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM
Next call Apple since yo have 90 days of free telephone support
Complimentary Support (USA)

HDMI to DVI to VGA to Monitor?

Similar Messages

Maybe you are looking for