Hdmi to lcd tv makes horrible digital sound

I just bought a brand new mac mini 2.3 i7 4g -  I plugged it into my Westinghouse SK-26h570d LCD TV using a Belkin hdmi to hdmi cable and when I turn up the volume on the TV all I get is horrible digital noise.  I tried plugging it into my other tv through hdmi and it works fine.  
Also, under sound it only gives me internal speaker option when plugged into Westinghouse TV,  when it is plugged into my other TV it gives me the option of internal speakers or HDMI output.  So I'm assuming it has something to do with this particular TV...
Any Ideas???  please help!

I'm sure you have already checked this but make sure there is nothing plugged into the analog jacks on your computer.
You may also want to check the BIOS and ensure that the audio is set for HDMI.

Similar Messages

  • Flash movies makes horrible "flickering" sound with new graphic card!

    I just bought a Gigabyte GeForce 460 GTX 1GB and now when I watch Flash movies
    the movies makes a really bad "flick" flick" "flick" sound. If i scroll down and away from the actuall movie screen
    the bad sound stops and the movie plays normally. But soon as I scroll up to the movie the sounds starts again.
    Can't stand the bad sound quality anymore!
    I tried latest Firefox & Internet Explorer.
    I tried uninstall both flash and drivers then reinstall with the latest updates.
    I tried searching the web for solutions.
    My PC:
    HP Pavilion
    Intel Pentium 4 CPU 3.60GHz 360GHz
    Memory: 3 GB
    System type: 32 bit
    Windows 7 Ultimate
    My new Graphic card:
    Link
    Thanks for the help!

    Hi, We'll have to continue later. From Adobe:
    Due to system maintenance with Adobe.com, the log-in and authentication for the Adobe Forums will be temporarily unavailable for approximately 3 hours on Saturday, Sept. 11, 2010.
    Maintenance will begin at 7:00 pm PST and will be complete by 10:00 pm PST. During this time, the Forums will be in Read-only mode.
    We apologize for any inconvenience. Thank you.
    by Mark Nichoson at Sep 7, 2010 10:02 AM
    Expiring the announcement will not delete it but will remove it from the public announcement list.  Are you sure you want to expire this announcement?
    Are you sure you want to delete this announcement?
    For my Time Zone, that is in about 10 minutes. EDT for me. 10PM PST
    eidnolb

  • Analog sound signal no digital sound

    I have a A660-BT2G25 laptop which includes DOLBY® Advanced Audio.  I connected it via an HDMI cable to the back of my Denon receiver and set the receiver to receive either digital sound input or analog sound input from the laptop that I am currently using as part of my entertainment center. All items in my device manager are operating properly (the system shows NVIDIA High Definition Audio under sound four identical times with all divers identical in each, all with normal operation & no conflicts-not sure if this is normal). The computer recognizes the Receiver as an Denon AVAMP-3 in the sound setup in Control Panel. Further,  I have set it as the default and run test after test. The properties there indicate the device is operating normally and shows DTS, Dolby Digital and Dolby Digital Plus. w/HDCP supported, up to 192 sampling rate, 16 & 24 bit. Here is the rub. My receiver is only receiving analog signals under PCM (analog signal) and not DTS (digital) so while the sound is good and clear per my receiver upgrading the signal, there is no digital splitting of the signal to the 5.1 channels. If I force the receiver to take only DTS signals over the HDMI cable there is no sound at all. There is nothing wrong with the receiver. Anybody have any suggestions???

    Hi, I just purchased a Mac Pro and am running 10.5.2. I am seeing the exact same behaviour when using the optical digital out from the Mac Pro to a Teac Receiver. It takes about 5 seconds for the audio to start playing from a "silence". If there is continuous playback there are no problems, but if there is ever a significant pause in the audio the receiver shows "unlock" on the display and stops playing out audio.
    It certainly does seem like the digital stream is getting interrupted which then causes an issue with the receiver.
    I haven't been able to find a solution yet.

  • Snow Leopard's digital sound is a giant step backwards

    I have a Mac Pro connected to a Pioneer receiver using an optical cable. When I was running system 10.5 my DVD's would play in DVD player with 5.1 digital sound ( I have a surround sound system connected for the sound). With Snow Leopard all the DVD player application outputs is Dolby Pro logic. A big difference in sound. If I boot up in Windows Vista using Boot Camp and play the same DVD I get 5.1 digital sound. Something seems to be wrong in OSX 10.6. I am going to go back to 10.5 until Apple gets this sound thing fixed unless someone here can tell me how to get the 5.1 digital sound to work in 10.6. This is a huge let down for me, and it would seem to me to be a giant step backwards for the operating system.

    HI,
    This would make a good feedback topic for Apple.
    http://www.apple.com/feedback/macosx.html
    Note, they read feedback but do not respond. But since this worked in 10.5 then hopefully that will be taken into consideration. Audio is important!
    Carolyn

  • PCI Sound Blaster X-Fi Xtreme Audio Get No Digital Sound Out to my Surround Reciev

    I have read almost everything but CANT FIGURE THIS OUT, PLEASE HELP ME OUT HERE :-)
    My PCI Sound Blaster X-Fi Xtreme Audio is conected to my Sony DTS/DD Reci'ver using a Mini Jack to Toslink cabel connected in the blue Digital Out minijack on the sound card and to my Optical?Toslink input on my reciever.
    I have enabled SPDIF out / Digital Output Only
    I have tried whit and whitout the Bit-Matched
    I have treied the different sampling rates 44, - 96 KHz
    I have tried playing from MS Media Player and DivX player. (dvd, mp3, radio li've, nett tv)
    Im using Vistax32
    I believe i have the correct settings and the correct cabel, but cant get no digital sound out, whats wrong?
    First I tought I neede the Digital I/O module from Creativ, but I have read that this is?NOT necessary.
    PLEASE ANY THING THAT CAN HELP ME SOLVE THIS WOULD MAKE ME REALLY HAPPY :-)

    YOU DONT NEED THE I/O accesory, or rather it is not essential. (unless your reciever only has digital optical(toslink) in?My experiment worked! alss ya need to connect from the sound cards digital out to your recievers coax digital audio?in is: "mono" mini (/8 inch) male to rca style male coax cable. you may have to choose digital only and somy other tricks from a given creative software(?they vary)?and or select the correct input for a given reciever....my Harman Kardon avr 00?and avr 300 series?are particularly tricky. Got pandora one up and running. Devo sounds good!
    Movies tonight via Netflix streaming.....YAY!

  • Digital sound output from G3 700mhz

    Can I output digital sound from my ibook G3 700mhz to my Nad Digital amp, which can input using either optical cable or single digital phono cable?
    If so which cable should I use and where can I get one from. Many Thanks Alex2001

    Not directly, no, since your iBook doesn't have a digital output, only a stereo analog output. There are external USB and Firewire audio output devices that would provide a digital output, but I can't make a specific recommendation. Perhaps if you ask in the iBook G3 area, someone can make a suggestion.

  • Digital sound output

    I just bought a HP Pavilion dv7-1040ew, mainly because of the blu-ray.
    But how do I get digital sound out to my amplifier. No use of blu-ray if i don't have DD.

    There is only hdmi out and I don't have that on my amp. Please help.
    Do I need to buy a extern soundcard? Or is there a cheaper way? 

  • Stop the horrible "PING" sound

    Hi,
    How can i stop windows making that horrible "PING" sound when i type into a disabled java text area window?

    How can i stop windows making that horrible "PING"
    sound when i type into a disabled java text area
    window?1. Don't type into a disabled Java text area.
    2. Change "Ding.wav" to "Chord.wav" to make a horrible "CHORD" sound.
    3. Unplug your loudspeaker.
    4. Change your OS.
    Seriously, it's a Windows problem not a Java problem.

  • Need I/O module to use digital sound with Audigy

    Am I understanding this correctly that I need to buy another piece of equiptment to make the sound card work for digital sound? A Digital I/O module for another $5?Seems pretty dumb not to include this.

    No, you DON'T need the Digital I/O to use the digital output of your card. Just a plain 3.5mm stereo jack with a pair of RCA connectors on the other end - it will give you the digital coaxial connection. If you want optical digital connection, yes, you need the extra module.And for that speakers, NO, you cannot use a digital connection. Read the manual...Message Edited by SoNic2367 on 08-07-200709:0 PM

  • No digital sound on K8N Neo

    Hi,
    I have a strange problem. When I try to play digital sound I have no sound unless I at the same time have the Pinnacle PCTV Vision application running. If I have that I get sound through the digital outputs but not if I close Vision.
    I have connected my speakers (with internal DA converters) with both SPDIF and optical cables.
    The mobo is a K8n Neo (7030) and audio drivers latest Realtek AC97.
    BIOS is 1.5.
    Any thoughts?
    Regards,
    Henkan

    Quote from: Richard on 14-November-05, 22:19:05
    Henkan,
    In the Control Panel click on Sounds and Audio Devices, make sure you have the correct audio output selected.
    Take Care,
    Richard
    Hi,
    Yepp, correct sound output is chosen.
    Henkan

  • HP Color LaserJet Pro MFP M177fw makes horrible noise and will not move past initializi​ng

    Makes horrible noise and will not move past initializing.

    Hi @HealthITLadyRed,
    I read your post and see that the printer is making noise and is stuck initializing. I would really like to be able to help you resolve this issue.
    I have provided some steps to try to see if we can resolve this issue.
    Check and remove any packaging material inside the printer and toner.
    Disconnect the USB/Network/FAX and power the printer on Standalone.
    Do a hard reset to see if that will resolve the issue.
    Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
    Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
    This ensures the printer is receiving full power and may help this situation.
    If the issue persists, perform a power drain by disconnecting the power cord from the back of the printer and keeping the power button pressed for 30 seconds and in case of a power switch keep the switch in ON position for 30 seconds before reconnecting the power chord.
    Update the printer's firmware by a USB connection. Software and Drivers.
    Select Option 2 and wait for the page to load and then select the link for firmware. This resolved the previous posters issue.
    I can send a private message with another step to try.
    In the forum beside your handle name just click on the envelope to view it.
    How is the printer connected? (USB/Ethernet/Wireless)
    What happened prior to this issue? (paper jam, changed toner) Any feedback would be appreciated.
    Is this a new printer?
    If you appreciate my efforts, please click the Thumbs up button below.
    If there is anything else I can help you with, just let me know. Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • My iPod touch is synced to my old Mac and I have a new PC. Now when I plug my iPod into the new computer it will make the connection sound, but will not show up in my iTunes. I do not care to have the content copied over. Any suggestions?

    My iPod touch is synced to my old Mac and I have a new PC. Now when I plug my iPod into the new computer it will make the connection sound, but will not show up in my iTunes. I do not care to have the content copied over. Any suggestions?

    Start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • The hinge makes a clicking sound at the right corner as i open and close the lid

    I bought my Mac 2 weeks ago and The hinge makes a clicking sound at the right corner as i open and close the lid. Someone help me out Please

    At the bottom of this page click
    Then on the right side of the next page click
    On the next page click
    Select a topic
    Select Other Topics then Hardware not working as expected
    Finally, provide your contact information and Apple will call you!

  • My old 1st gen ipod touch wont turn on and makes a clicking sound when I plug it in.

    My old 1st gen ipod touch wont turn on and makes a clicking sound when I plug it in. The ipod doesnt turn on when I plug it into the wall, even if I let it charge, and itunes won't recognize it. I have tried to reset it with the home and power buttons. Whats wrong and how can I fix it? I think it might be the memory or the battery. What could the clicking sound be related to? Thanks

    Try placing the iPod in recovery mode and then try restoring the iPod.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore
    After that I would make an appointment at the Genius Bar of an Apple store.

  • I have recently updated my iTunes to the latest software. Since then my iphone will not sync with the computer, it doesn't show up in my computer any more. The computer makes the bing sound as I plug in but i am unable to sync, how can I fix this problem?

    I have recently updated my iTunes to the latest software. Since then my iphone will not sync with itunes, it doesn't show up in my computer any more either. The computer makes the bing sound as I plug in but i am unable to sync, how can I fix this problem?

    http://support.apple.com/kb/TS1538

Maybe you are looking for