µHDMI to VGA converter that works with Encore 8

I want to connect a VGA monitor or beamer to the Encore. So I need a converter so that I can connect the them via VGA to the µHDMI port of the Encore 8. Does anyone know a converter which works? I tried this Delock (http://www.delock.de/produkte/G_65513/merkmale.html?setLanguage=en) but I don't get a picture on the monitor.

Acer NP.OTH11.004 micro-HDMI to VGA
Acer NP.OTH11.004 Pic
In the Acer US official webpage you can find
Staples US price $16.49 (FREE Shipping to store), but Staples Germany has no Acer NP.OTH11.004.
Rakuten US price $11.24 + $4.99 Shipping, but Rakuten.de has no Acer NP.OTH11.004.
advice:
do not buy a non-Prime-marked of something via from any one of Amazon sites.
Acer US site has inaccurate illustrations in the NP.OTH11.004 relevant webpage, therein a black is converter NP.OTH11.00c.
Acer US online store slightly details the NP.OTH11.00C, and Acer Canada online store has related accessories list.
Toshiba US site had ever having some half-baked info in the WT8-A relevant webpage.
What working qualities are these American staffs in nowadays? Americans are going downhill？
Although, I do no intend to buy Acer computer,
but the Acer HDMI/VGA converter is worth buying.
Acer's another converter NP.OTH11.00C, Mini-CP to VGA.

Similar Messages

What HDMI to Component converter will work with the current generation Apple TV3?

What HDMI to Component converter will work with the current generation Apple TV3?

http://www.hdfury.com/products/hdfuryiii-specs/

Mini-HDMI to VGA does not work with projectors having long cables

Hi
I use a ThinkPad Yoga with Windows 8.1 and have problems to get a video signal to some projectors using a Mini-HDMI VGA adapter like this http://www.amazon.com/Cable-Matters-Active-Female-Adapter/dp/B00879ELGA/ref=sr_1_1?ie=UTF8&qid=13979...
Usually it works but in some lecture/presentation rooms projectors show "no signal" (I changed all possible graphic settings). There seems to be a problem with cable length because after using a VGA repeater increasing video signal strength projectors show a picture. But the problem is those VGA repeaters are quite expensive and too big (if you are travelling). Some Mini-HDMI VGA adapters have USB ports to connect them to a power source but this does not really help to increase signal strength.I find this issue very annoying because all other (older) laptops with VGA ports or MacBooks with displayport-VGA adapters do not have this problem and produce a video signal that is strong enough to connect to projectors with long cables.
My questions are:
a) Is it possible to adjust my ThinkPad hardware settings to improve signal strength?
b) If not, is there a small Mini-HDMI VGA adapter that produces a signal strong enough to connect projectors with long cables?
c) If not, is there an affordable and small VGA repeater that does the job?
Thanks!

1) that is not possible
2) Why not get a USB2VGA converter?
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Keynotes + iPad2 (AirPlay) + AppleTV + Digitech HDMI to VGA Converter.

Hi,
I am going to buy a iPad2, Apple TV and DigiTech HDMI to VGA/Component and LR Analogue Audio Converter, which I want to connect to my data projector in my classroom. AirPlay on the iPad 2 - http://www.youtube.com/watch?v=10nfcwTHbIA
I want to use Keynotes, and mirror iPad Apps onto the projector.
I will provide various students with iPad2 devices and let them interact with the lesson as well.
Is this possible with Keynotes, and is there another option to regarding the connection to the projector?
At this stage I need to buy a Apple HDMI Adapter ($39), Apple TV ($129), and HDMI to VGA converter ($149). So $319 to get a wireless connection to my projector.
Does anyone have other options ?
Kind Regards
Sean Udal

I believe the only devices you need to achieve a wireless iPad 2 mirroring experience on a display is an Apple TV 2. When iOS 5 comes out in a few weeks the iPad 2 will have full bore wireless mirroring using the Apple TV 2. The Apple TV 2 outputs an HDMI signal so if your display has HDMI inputs you're home free. However, you like me (I am also a teacher), have the nasty problem that our classroom projectors only accept a VGA input (probably composite too). That Apple TV 2 is sending an encrypted HDMC signal to your projector via it's HDMI cable. So, you need a HDMI to VGA converter that can overcome this encryption. I just bought a HD Fury 3 HDMI to VGA converter that has a chip in it to deal with the HDCP encryption. Sadly, I just hooked this system up in my classroom and it doesn't work. I posted this information in the other thread you started asking about this same issue. One of our school's tech personal is going to see if he can resolve this but I am not optimistic. There are many posts in other forums that claim great success with the Fury 3. If anyone has some insight regarding this I'd love to hear it. My projector is a new Epson short throw projector. It cost somewhere in the range of $1600 - $2000. Sorry, can't remember the specific model off hand. Anyway, even though it has no HDMI inputs, it is not a cheap projector.

Is there a Digital AV HDMI Adapter for the iPad 2(30pin) that works with iOS8?

Is there a Digital AV HDMI Adapter for the iPad 2(30pin) that works with iOS8? I had one that connected my Ipad2 to my tv so I can stream netflix on a TV that does not have the internet. As soon as I updated my iPad to iOS8 it no longer works Help!

You can speak & make notes. Get Dragon Dictation app.
 Cheers, Tom

Acrobat 9 does not recognize the smart card reader that work with other app. Can someone help me?

Hi to All,
Acrobat 9 (included in CS4 design premium) does not recognize the smart card reader. I have a smart card reader ACR38 smart card that works with all applications except Acrobat 9 pro. I tried to uninstall and reinstall it again, but when I try to insert the digital signature message is always the same, that does not find the Acrobat reader. Can someone help me?

Hi MartinR
Thank you for your reply, i have tried what you suggest, and it did not work, the i DVD opening title changed but not the embedded movie.
Perhaps it is a setting in Final Cut Express?
After capturing my footage, i open a new project then i convert all clips to anamorphic, to give me the letterbox effect, i have tried now with and without anamorphic.
In my canvas screen, the footage does not fill the square, even if i have not selected anamorphic, and fall well within the TV safe areas, but the only way to ill the canvas up is to crop it bigger, but still when i export it does not give me the full screen view.
Any ideas?

Ps4 no signal by using hdmi to vga converter

I bought hdmi to vga converter to make my ps4 works on my samsung monitor 1366x768 and 16:9 the converter worked on my laptop and my receiver but didnt work on my ps4 what is the solution??

actually I didnt buy it from amazon it looks like it only I think it looks like this one and my laptop is hp not a mac I think this the one which I have http://www.amazon.com/gp/aw/d/B00879DM56/ref=mp_s_a_1_5?qid=1436527107&sr=8-5&pi=AC_SX110_SY165_QL70&keywords=female+vga+adapter&dpPl=1&dpID=41M26Umg%2BaL&ref=plSrch

Ni supplied hdmi to vga converter

I hope this is right board, my apologies if its not.
Has anyone else had a problem with screen resolutions when using the hdmi to vga converter supplied with a 8133 controller?
the controllers gpu (ati radeon e2400) is more than capable of 2048*(i forget now)
I have a iiyama prolite x2472hd which again is more than capable
through the adaptor (hdmi to vga) i get 1600* 900 @60Hz. highest resolution and I can get it upto 1920*1080 but the refresh makes it unusable.
If i use the controller without the adaptor i get 1920*1080 at 70Hz (i believe it will show at higher resolutions).
if you want want high resolutions from pxi controllers do not use the supplied adaptor
i wanted to post this problem with the solution so other people could find some info as there is little around but any comments greatly appreciated
Please remember to accept any solutions and give kudos, Thanks
LV 8.6.1, LV2010,LV2011SP1, FPGA, Win7

Hi Exactly i have the same issue,i am also looking for the solution,if people have the solution ,pls come out..

Is there a security surveillance system that works with a MacBook Pro or iPod touch?

Is there a security surveillance system that works with a MacBook Pro or iPod Touch?

Problem is most vehicles can't supply enough power to charge a MacBook Pro battery, not without placing a generator in the engine compartment someplace like police cars and campers have.
Apple provides the MagSafe Airline Adapter but it's designed for 15V, not the 12V of vehicles, then it's only to keep the battery from discharging on airplanes, it won't charge it.
http://store.apple.com/us/product/MB441Z/A?fnode=MTY1NDEwMQ&mco=MTA4NDE2Mjc
"It's designed for 15V DC that you find on airplanes. If you are the DIY type, you can make your own 15V DC automotive socket by using an automotive universal laptop supply to step up the car's 12V to 15V"
I found this online:
http://www.365laptop.us/product_info.php?language=en&currency=USD&products_id=10 64
Notice the device says:
"Input: 11-14V DC 8Amp MAX " - Cars are 12V DC.
Output: -DC 15V.... the same as the Airline Adapter
Looks like one needs to cut and splice the two parts/wires one needs together.
This 12V to 15V conversion is a lot better/streamlined than trying to upconvert 12V DC to a whopping 120 AC and then your Mac's power brick is downconverting 120AC to what it needs in DC to try to charge the battery which the vehicle can't supply the wattage for anyway.
Apple has a patent on the MagSafe adapter, they don't provide a 12V to 15V converter + MagSafe adaptor for the car. It would be nice if they did though.

My list of third party apps that work with Leopard (and those that don't)

Here is my list of my apps that worked fine with Tiger, and those that do (or don't) work with Leopard:
My apps that work with Leopard (in alphabetical order):
BBEdit 8.6
Bryce 6.1
Fetch 5.2.1
Filemaker 8.5
Graphic Converter 5.9
Lotto Sorcerer 6.9
Mariner Calc 5.5.1
Navicat 6.3.7
Poser 6 (but LONG delay after splash screen)
REALBasic 2007r4
ReadIris Pro 9.0
Topo 3.3.3
TurboCAD Mac Pro v2
Those that don't work with Leopard:
None so far!

There are some links to other reported problems here:
http://discussions.apple.com/message.jspa?messageID=5653683#5653683
Macintouch is worth watching:
http://www.macintouch.com/readerreports/leopard/index.html#d27oct2007

Does anyone have an example of a c++ TCP/IP client that works with labview TCP?IP server ??

I have the labview TCP/IP client/server working fine, but now I need to do this were labview is the TCP/IP server and the c++ program is the client. Does anybody have a simple C++ TCP/IP client that works with labview TCP/IP server ????

Thanks, you were right, we modified the c++ program to include the port # in the IP address and it worked.We also forgot to convert the port #. I included my labview and c++ program.
Attachments:
TCP-IP.llb ‏47 KB
client.exe ‏40 KB

I have Maverick is there anything like Canopus 200 that works with Maverick. I have 80 VHS's from the 1980's I need to cook?

I have Maverick is there anything like Canopus 200 that works with Maverick. I have 80 VHS's from the 1980's I need to cook?

my son is using the Hauppage PVR2 + HDPVRCapture recording (endlessly…) his Playstation3 sessions. Same combo can be used to connect any DVD or VHSplayer to a Mac and transfering/digitize private recordings.The Hauppage offers hdmi- or component-IN…
… got it at eBay for ~70€ plus 30€ for the software....
I'm using MacOS 10.9… works like charme…

How can I make an icon that links to a webpage that works with Mac and Windows??

Hi!
I burn CDs with my photos and send them to clients. Besides the photos folder, I would like to include a file (similar to the .webloc files on the Mac Desktop) that can be clicked and it will be linked to my website - it will open up a browser window and go to my website . Is it posssible to make one of these icons that works with both Macs and Windows machines? Thanks!

Now it works! Thanks, Denico!
The reason I saved to text: The first time I followed your instructions, it did not work. I tried to figure out what I did wrong and saw that you wrote to "save as plain text." I did not know what this means and there was no option available to save a plain text. So I looked around and saw "save as stationery" and I guessed that maybe that was what you meant. And after that, it worked! But the next thing you know, the icons started duplicating themselves.
I guess I had made a different mistake in the beginning and I fixed it without knowing what it is.
Thanks for clearing that up.
But just one question. WHY does saving as "stationery" make an icon duplicate itself?

A UPS model that works with Mac Native software to do a graceful shutdown and automatic restart during a power failure.

I've tried 3 UPS's (2 APC and one TripLite) that state they are OSX compatible, however, they do not fully respond to the native osx setting in (system Preferences/ Energy Saver/ UPS/Start up automatically after a power failure). This is what happens:
During a power outage, the OS does a graceful shutdown, but does not reboot when power is restored.
Apparently, the UPS is not notified to turn off during the shut down process. The power (on-Off-On) cycle is required by the mac to restart.
Trip lite tech support says they have software that works with Windows and linux to do this, but not mac.
I've tried two older APC UPS's, One Smart UPS1500 and a Back-UPS 1500 with the same result on two different servers and one iMac.
At this point I'm looking for a make and model of a UPS that does work. If anyone can verify a make and model that actually does this, I'd greatly appreciate it.
Its a simple test, just pull the plug on your UPS, wait for the system to shut down, and then plug the UPS back in. The system should reboot.

Many of the CyberPower UPS units are compatible. Checkout the home solutions on this page: http://www.cyberpowersystems.com/products/ups-systems.html

I just upgraded to os 10.9.5. When I try to open iPhoto, I am told that the version I have(9.3), is not compatible with the os. But it came with it when I upgraded. What do I have to do to get an iPhoto that works with 10.9.5? TIA

I just upgraded to os 10.9.5 on my 15 " macbook pro from os 10.7.5. When I try to open iPhoto, I get the message that it is not compatible with the os. How can that be??? It came with the upgrade. It says the version of iPhoto is 9.3. How do I get an iPhoto that works with os 10.9.5? TIA

This screenshot shows which previous versions of iPhoto are compatible with Mavericks. It also indicates which versions qualify for a free upgradeto iPhoto 9.5.1 and which require a purchase:
Note 1: every day more users are reporting problems with iPhoto 8.1.2 so I've included it in the non compatible category.
Note 2: If your previous version of iPhoto was iPhoto 7 (08) or earlier you'll need to download and run the iPhoto Library Upgrader 1.1 application on the library before opening it with iPhoto 9.5.1

µHDMI to VGA converter that works with Encore 8

Similar Messages

Maybe you are looking for