HDMI TV launcher and Camera quality issue after update to android 4.0.4

Hello ,
I've bought a Xperia S LT26i with android 2.3.7 ,all went ok ,camera worked ok ,HDMI and tv launcher no issue.
After i've made a OTA upgrade to Android 4.0.4  6.1.A.2.55.
Now after this update ,TV Launcher over HDMI does not work anymore and all potos from camera dooring day time or night have lots of noise.
Also in video mode ,is the same ,using any kind of settings from camera ,dose not doo any kind of noise reduction.
Any idea how i can fix this maybe ?

I suggest that you try to run a software reinstall using SUS.
http://www.sonymobile.com/gb/tools/update-service/
If the problem still remains you should contact your local support team, to have the phone examined and fixed at an repair center.
http://www.sonymobile.com/global-en/support/contact-us/contact-info/
 - Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Similar Messages

  • Slow network on a6000 plus and camera quality worst after recent upgrade.

    The recent smartphone given by the lenovo is good but the network is too slow as compared to other mobile companies who work in the same network area.
    Also the recent upgrade of vibe ui makes the camera quality worst. There seems grains now in the camera.
    Please fix these two.

    hi
    I have the same problem ... I will try to call Apple .. maybe they can help...

  • Display Quality issue after updating to Bootcamp 3.1 (windows 7 64-bit)

    I managed to install Windows 7 64-bit without issues (all issues got resolved after installing bootcamp 3.0 from the OSX DVD).
    Then I saw the BootCamp update for windows 7 64-bit as being (Recommended) and I installed it...
    after that I got a problem in the screen where I get low quality in gradient colors.
    I tried installing the ATI Radeon 4850 Driver from the ATI website , but without any luck, the driver is identified correctly and color depth (32-bit) , but still the quality isn't acceptable.
    Anyone facing similar issue? please advise ? I tried restore point but it failed.
    Any suggestions?

    RegrettingSwitch wrote:
    I think that any of you expecting (as I was) non-mobility cards are going to
    be disappointed (as I am). SiSoft Sandra definitely reports Radeon HD4850
    Mobility in my iMac, which is the reason I can't install the latest Catalyst
    Are you sure? Since both CPU-Z 1.53.1 and Catalyst Control Center are stating that my graphic card is a ATI Radeon HD 4850 (device ID 944A).. :S
    So, Bootcamp 3.1 seems to have solved nothing (plugging headphones in still
    jumps one core straight to ~100%) and actually created a problem that didn't
    exist - i.e colour banding!. And, obviously, no software fix is going address
    You could try to roll back the driver. I've more or less the instruction written in this thread and at the moment, with 8.661 version of the driver I don't have the color banding issue (I've to test stability yet, since it seems that this driver version is quite more unstable).
    However, yeah I feel your disappointment, I'm a Mac user since 2001, changed several macs and this is the first one that comes with so much issues.

  • Lenovo VIBE Z2 Pro problems with hearing and camera after updating to android Lolipop

    Hello All,
    After updating to Android Lolipop three days ago, on my phone occured some problems. 
    1. The hearing while calling/receiving a call is very low, when the volume is on max. It was extremly high on max volume before the update. 
    2. Now when I'm using the camera most of the pictures are captured with low quality and not well focused. Around one out of four pictures comes out with good quality and well focused. But I reviewed the settings and tried do switch them all the ways around but the problem still occurs. 
    Any help will be appreciated! Hopefully the next update will fix these issues.
    Regards,
    Sava

    gvdkolk wrote:
    Hello Guru,
    One question:
    Since I went to VIBEU_V2.0_1448_ST_K920_CMCC my phone is not connacting to the 3g network.
    Just edge. I refreshed apn restart the phone, no result.
    Is this a result of the update?
    Thanks in advance,
    Ger
    Hi Ger
    The Chinese K920 version is meant to be sold and used only in China with a certain local carrier/provider(That's why it's got the ''China Mobile'' logo on the back).The main difference between the Chinese and the international K920 version is the GSM receiver(hardware difference)....
    .....It seams there is a partial workaround(To make the Chinese version more ''internationally 3G/4G friendly'') but my experience with the Chinese K920 is limited and in this case it would be better to ask the actual users->
    Check out THIS THREAD .
    I can't help you much on this one....Sorry.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"! 
    Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • "KERN_INVALID_ADDRESS at 0x000000ac" I am facing this issue after updateing my device to ios 5 and my app crashes with this error

    "KERN_INVALID_ADDRESS at 0x000000ac" I am facing this issue after updateing my device to ios 5 and my app crashes with this error

    "KERN_INVALID_ADDRESS at 0x000000ac" I am facing this issue after updateing my device to ios 5 and my app crashes with this error

  • Syncing issues after updating to 10.3.1.55

    After upgrading to itunes 10.3.1.55, today, it no longer recognizes my iPhone 4. I plug it in, the iPhone makes its normal syncing noice. I get a prompt, like always about it recognizing the camera and how i want to handle it. I cancel it, as usual, and then it never shows up in iTunes. I close itunes, connect my phone and it does not start itunes as it normally should. No error messages, just no response. Can anyone help with ideas?

    I had the same issue, after updating to 10.3.1.55 it would error out saying something along the lines of not being able to read the catalog or something.  I think the error even states do a restore to fix it.  Last night that is what I did, clicked restore and then had it transfer all my items back.  I'm glad I had just synced my phone prior to the update so the restore was really current.

  • Safari, App Store Issues after updating to 10.7.2

    I have been running my imac that came preinstalled with Lion
    I am having this wierd issue after updating to 10.7.2 recently
    When i run Safari, App Store, Itunes, i can see its loading..
    but after 2 hours its still loading.
    It just seems to be stuck and its not the Beach ball.. So i dont think it hanged
    Its not a network issue as well, since i am typing this on Firefox, which is running perfectly
    What could be the reason?

    I'm having the same issue on my iMac. I've also noticed the rear of the left side is getting a lot hotter than normal.
    I downloaded (from: http://support.apple.com/kb/DL1459) the update again and reinstalled it. But nothing's changed. Is there anything else I can try?
    Scott

  • Firewire epson R2400 issues after update to 10.8.4 will not print causes system shutdown

    anyone had similar issue and or a fix?

    issues after update
    Download and install new drivers from the Epson site for your printer model.
    Epson Stylus Photo R2400, Drivers & Downloads - Technical Support - Epson America, Inc.

  • Ios 7, camera doesnt work after updating, iphone4

    My iphone 4 camera doesnt work after updating on ios 7

    completely erease the ipad and reinstall the OS.
    Go to settings>general>reset>erease all content and settings. Wait for the ipad to finish then see if it works.

  • I cannot agree with the term and conditions of itunes after update ios7?

    I cant agree with the terms and conditions of itunes after update to ios 7,

    had the same issue 52 pages and no button to agree - also the send to email doesnt work either.
    go to Radio on Music app not itunes store and you can agree it there - will appear red in top right hand corner worked for me!!

  • Issues after updating iPhone3GS to iOS5 on TIM cellular data network (Italy)

    Hi everyone
    I have issues after updating iPhone3GS to iOS5 on TIM cellular data network.
    After installing iOS5 I had to switch from apn ibox.tim.it to wap.tim.it
    Since then the phone is unusable for any internet activity that is barely "data demanding" (e.g facebook app take literaly hours to update), everyting requires way to much time... the iPhone is not an iPhone anymore... it's worse than my blackberry with just GPRS on it.
    TIM technical support suggested me to switch back on apn ibox.tim.it, but then I would not be able to use internet tethering anymore (they say because of Apple iOS5) ... to bad I need internet tethering for work.
    I am seriously thinking to switch ISP or phone.
    Anyone did experience same problem / found a solution?

    Hi Raia.D,
    Welcome to the Support Communities!
    The first thing I would suggest is to restart your iPhone.  Then tap the Settings app, and you should see Cellular listed on the main settings screen.  You should see Airplane Mode, Wi-Fi, Bluetooth, and then Cellular.
    Here are some additional troubleshooting steps to try:
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    Cheers,
    - Judy

  • HT4623 I updated my ipad to iOS 6 yesterday and it worked immediately after update.  I left home for about 4 hours and when I returned I was uable to get my ipad to come up. I only have a black screen.  When I press the on off button nothing happens.

    I updated my ipad to iOS 6 yesterday and it worked immediately after updating my ipad worked as it should.  I left and came back in about 4 hours and have a black screen.  When I press the on off button nothing happens.  Help.

    Assuming that the battery isn't empty (and it can take up to 15 minutes of charging before it will respond), then have you tried a reset ? Press and hold both the sleep/on/off and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Ipad 2 facetime and Imessage didnt work after updated to IOS 7.

    Hi everyone,my problem is my Ipad 2 facetime and Imessage didnt work after updated to IOS 7. When i try to login ,it's keep saying
         "facetime activation could not sign in please check your network connection" or
         "fImessage activation could not sign in please check your network connection"
    so,i reset everything and reset my network too,but nothing change.
    BUT,when i connect my ipad 2 with my iphone using ad-hoc,the facetime and Imessage worked really good,just like normal.
    And my iphone using Optus network.,So when i connect like that,my iphone using 3G and share ad-hoc to my ipad and everything work fine.
    SO,anyone having idea of how to fix this problem,please,help me. And thanks alot for your time .I just want everything working normally just like before i update to IOS 7.
                   NOTE : before i update my ipad and my iphone,everything worked fine with my wireless router. It's just happen to my ipad since the update.
    Thanks alot for your time ,any idea will be very helpful to me at this time. Again,thanks for you help .

    backup the device with itunes.
    Restore the device with itunes and set up as new.
    Sign into the facetime and imessage to activate it.
    After that is done and activation is good.
    Restore from the backup.
    Then make sure to sign into facetime and imessage again and you should be good to go

  • Portable Wireless Server WG-C10 doesn't stream any audio and some video content after updating phone to Android Lollipop 5.x

    The Portable Wireless Server WG-C10 I purchased in 2014 doesn't stream any audio and some video content after updating phone to Android Lollipop 5.x.
    The WG-C10 firmware is the last version which is available and the PWS Manager software is the last version available in Google Play Store.
    There are no updates for the WG-C10 firmware nor PWS Manager software since 2013 or for Android 5.x (Lollipop) and I don't know if the WG-C10 firmware is the problem or if the PWS Manager software is the problem.
    BTW, I am still able to stream this content on my tablet which is on KitKat (4.4.x) so the files are not corrupted.  The only problem is with Lollipop.
    PWS Manager in the Google Play Store says it supports Android 4.0+ which is no longer true.
    The audio file formats which fail to stream are:  mp3 and wav
    The video file formats which fail to stream are:  mp4, avi and 3gp
    JPEG Images appear to work fine, but I haven't tried other formats.
    I purchased the WG-C10 to stream audio and video primarily to my phone and now that this no longer works, the WG-C10 is useless to me.
    Any ideas?

    Hi juicespeare1,
    Welcome to the Sony Community!
    Upon checking your inquiry, the best division to respond to your concern is our Sony Mobile department.
    You can reach them at this site: http://www.sonymobile.com/global-en/support/contact-us/contact-info/.
    If my post answers your question, please mark it as "Accept as Solution"

  • LOST Default Alert/Ringing/Alarm Tones in Z3 Compact after update in Android 5.1.1

    LOST Default Alert/Ringing/Alarm Tones in Z3 Compact after update in Android 5.1.1
    I discovered it when I tried to change my Alert Tone, I can no longer find the list of available Alert Tones. When I click on Settings --> Sound & notification --> Notification Sound --> File Commander app --> Music
    The Xperia Tones are not there only the App Tones and other sound/music.
    I tried changing my Notification Sound in Safe Mode (Hold power off then reboot to safe mode) still the default sounds are not there (I did this to disable installed apps that might be the reason why I cannot see it)
    Anyway, this is not a critical issue I just want to know if I'm the only one experience thia after the Android 5.1.1 Lollipop update. I also want Xperia Team to notice/check this issue.
    Thanks in advance for the help.

    Tones may have changed from what you were use to in previous versions (Just checked and they are different) However if you prefer the old ones then XDA has them here (Click on the Blue Download now not the Orange Download bar)

Maybe you are looking for