HDMI + VGA Question // HP DV7-4000 series.
Dear Friends,
I have a question about usig external monitor(s) with my HP DV7. The specific model # is DV7-4287cl
I have both an HDMI port and a VGA port on this model. I plan to use an external monitor with it but I wonder if it is not possible to use two external monitors with it given I have two separate ports?
This may be a dumb question but I have a specific need to use an external monitor with my notebook, and having two instead of one wouldn't be a bad option.
Many thanks, in advance.
This question was solved.
View Solution.
You can use one external monitor. The hdmi port will provide a much clearer sharper picture, but either that or the vga port will be acceptable. Two outputs is the limit of the video card, and one of those is always the built in laptop display.
Similar Messages
-
Hi. I have a DV7-4000 series Laptop (4010TX). By accident I smashed it on a wooden cupboard and the left sided hing and the bottom case were damaged. The lap boots up normally and the cooler fan apprears to be working fine. But a tremendous amount of heat is leaked out from the damaged end requiring me to replace the hing and the plastic (or Fiber) bottom case. Can anyone inform me where to purchase a Bottom Cover for this particular model please. Hing can easily be bought from e-bay, but not the botto case. Thanks.
Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar -
Hi, I bought HP dm1-4310nr netbook from US and run into a problem.
As you know US uses different keyboard layout than we here in Europe.
I was hoping to replace the keyboard from my pc by buying nordic version from ebay.
Only flaw is that there isn't any version of this precise keyboard model in market though.
Is some other 4000-series's keyboard compatible with this one?
This question was solved.
View Solution.Hi,
You bought a special edition (suffix nr) therefore you can't find keyboard in other region. You can easily find keyboard for your region if you bought a normal dm1 machine as shown on page 43 of the following document:
http://h10032.www1.hp.com/ctg/Manual/c02666702.pdf
For your machine, pleae check page #55 on the first manual of the following link:
http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&lc=en&product=5328049
You may want to try part from the first document, this may or may not work.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
HDCP Error with HDMI-VGA connections
We have been using Apple TV 3 Software Version 7.0.2(6915) for connecting the Apple TV to classroom projectors that have a VGA port in. This was working perfectly till last week, and it seems a new software update was pushed to the Apple TV device now we get "This Content Requires HDCP for playback". Tried multiple different options of soft and hard reboots, resets and restarts nothing helps. Connecting the same Apple TV using HDMI-HDMI cable works fine. We are using Kanex HDMI-VGA adapter. If someone has the same issue please write back since there have 26 Apple TVs in the school and is being actively used by instructors to project their work to the class.
ravijn wrote:
We have been using Apple TV 3 Software Version 7.0.2(6915) for connecting the Apple TV to classroom projectors that have a VGA port in. This was working perfectly till last week, and it seems a new software update was pushed to the Apple TV device now we get "This Content Requires HDCP for playback".
As far as I know, 7.0.2(6915) is the latest software version & nothing new has been pushed out by Apple since its release months ago.
You problem is most likely exactly what the error message indicates: the content (for example commercial movies from a streaming service or an iTunes library) you are trying play on the ATV is protected by the HDCP encryption standard, so unless the Kanex adaptor supports HDCP internally, the ATV will not output the protected content to it.
I looked on the Kanex website to see if they claim the ATV Pro adaptor supports HDCP but nothing there says if it does or doesn't. Also, one of the U.S. Apple Store questions about the device has conflicting answers for that, so I suggest you contact Kanex directly for a more definitive answer & perhaps some help with the issue.
Failing that, you could try your setup with some content you know is not protected by HDCP (like a home movie in an iTunes library). If that works, then the problem almost certainly is that the Kanex doesn't support HDCP & you will not be able to use it with any content so protected. -
Mac Pro OSX 10.8.3 HP 4000 series scanners are not detecting.
Well..I think, I did everything. I have followed all instructions recommended by HP. I have updated and installed latest drivers. I have even searched the warez sites to find a trick. Useless, useless and useless.
Hardware is retina display with 256 GB SSD, 1600 mGz 8 GB ram and I7 processor. OSX version is 10.8.3
HP 4000 series scanners are not detecting by this machine. Vuescan is detecting but the scanning quality is also terrible.
Strange. I have nothing to say.For the Scanjet 4850, follow the link below and click on the instructions tab. It looks like you have to get the software and drivers for 10.6 and run a patch to make them work with 10.8. That should get the scanner installed and working.
Scanjet Software Patch to Use OS X 10.6 Software and Driver on OS X 10.7 and 10.8
For the Scanjet G4050, all you should need to do is install the driver from the link below to be able to use the scanner with image capture and other similar products.
HP Scanjet ICA Software for Mac OS X 10.6.8, 10.7 or 10.8
Let me know what happens.
I am a printer tech for HP. -
Connecting MAC Air to Projector - which is better, hdmi, vga or usb?
Connecting MAC Air to Projector - which is better, hdmi, vga or usb?
HDMI is thje preferred digital replacemnt for older analog video standards, which your other choices use. It offers far higher signal and definition quality.
Apple has an adapter that is used with your Thunderbolt port/ Mini DisplayPort, if yours is equipped as such.
I've not had a problem with this. It is a Belkin.
http://store.apple.com/us/product/HA824ZM/A/belkin-mini-displayport-to-hdmi-adap ter?fnode=51 -
Can I use mini dp/HDMI/VGA same time?
hi ,I have a portege z10t, I want to connect the machine with 3 LG monitors, is it possible to plug the monitors to z10t's ports(mini dp/hdmi/vga)? some post says that you can only have one output between mini display port and HDMI, is this true ,thanks for you help
There's a number of videos on YouTube on how to do this. You will probably need a multi display adapter.
Mike -
MacMini HDMI/vga adapter not detecting resolution
hi all,
i have a mac mini (10.9.2) and on the back i have plugged up a hdmi/vga adapter and i have plugged in the vga cable to a dell 24" monitor (1920X1200@60Mhz)
for some reason it cannot detect the display resolution, it onlys shows the max as 1600X1200
can anyone please advise me on what im doing wrong
many thanks
robCould be the VGA adapter. What brand/model is it?
-
[SOLVED] no hdmi sound (Radeon HD 7700/7800 Series)
Pulseaudio detects the sound card, and paplay gives sound but totem or youtube movies doesn't give any sound. Gnome sound volume test gives sound though. What should I do to fix the hdmi sound?
'pactl list sinks' shows:
Sink #0
State: RUNNING
Name: alsa_output.pci-0000_07_00.1.hdmi-stereo
Description: Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series] Digital Stereo (HDMI)
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 6
Mute: no
Volume: front-left: 43861 / 67% / -10.46 dB, front-right: 43861 / 67% / -10.46 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.pci-0000_07_00.1.hdmi-stereo.monitor
Latency: 1182766 usec, configured 1999818 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY SET_FORMATS
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "HDMI 0"
alsa.id = "HDMI 0"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "3"
alsa.card = "1"
alsa.card_name = "HDA ATI HDMI"
alsa.long_card_name = "HDA ATI HDMI at 0xfe760000 irq 58"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:07:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:0d.0/0000:07:00.1/sound/card1"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
device.product.id = "aab0"
device.product.name = "Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]"
device.string = "hdmi:1"
device.buffering.buffer_size = "352768"
device.buffering.fragment_size = "176384"
device.access_mode = "mmap+timer"
device.profile.name = "hdmi-stereo"
device.profile.description = "Digital Stereo (HDMI)"
device.description = "Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series] Digital Stereo (HDMI)"
alsa.mixer_name = "ATI R6xx HDMI"
alsa.components = "HDA:1002aa01,00aa0100,00100300"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports:
hdmi-output-0: HDMI / DisplayPort (priority: 5900, available)
Active Port: hdmi-output-0
Formats:
pcm
Sink #1
State: SUSPENDED
Name: alsa_output.pci-0000_00_14.2.analog-stereo
Description: Built-in Audio Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 7
Mute: no
Volume: front-left: 50112 / 76% / -6.99 dB, front-right: 50112 / 76% / -6.99 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.pci-0000_00_14.2.analog-stereo.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC892 Analog"
alsa.id = "ALC892 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA ATI SB"
alsa.long_card_name = "HDA ATI SB at 0xfeb00000 irq 16"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:14.2"
sysfs.path = "/devices/pci0000:00/0000:00:14.2/sound/card0"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
device.product.id = "4383"
device.product.name = "SBx00 Azalia (Intel HDA)"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "352768"
device.buffering.fragment_size = "176384"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
alsa.mixer_name = "Realtek ALC892"
alsa.components = "HDA:10ec0892,10438436,00100302"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports:
analog-output-lineout: Line Out (priority: 9900, not available)
analog-output-headphones: Headphones (priority: 9000, not available)
Active Port: analog-output-lineout
Formats:
pcm
'pactl list short sinks' shows:
0 alsa_output.pci-0000_07_00.1.hdmi-stereo module-alsa-card.c s16le 2ch 44100Hz SUSPENDED
1 alsa_output.pci-0000_00_14.2.analog-stereo module-alsa-card.c s16le 2ch 44100Hz SUSPENDED
I've already tried to comment "load-module module-suspend-on-idle" in /etc/pulse/default.pa file, but it shows idle instead of suspended. Anyone have any idea what might be wrong with the pulseaudio?
Last edited by ahcaliskan (2015-05-19 15:45:53)Sound still not working. Here is the pulseaudio output:
I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
D: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
D: [pulseaudio] core-util.c: setpriority() worked.
I: [pulseaudio] core-util.c: Successfully acquired nice level -10, which is lower than the requested -11.
I: [pulseaudio] main.c: This is PulseAudio 6.0
D: [pulseaudio] main.c: Compilation host: x86_64-unknown-linux-gnu
D: [pulseaudio] main.c: Compilation CFLAGS: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector-strong --param=ssp-buffer-size=4 -Wall -W -Wextra -Wno-long-long -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -ffast-math -fno-common -fdiagnostics-show-option -fdiagnostics-color=auto
D: [pulseaudio] main.c: Running on host: Linux x86_64 4.0.3 #1 SMP PREEMPT Thu May 14 08:58:24 UTC 2015
D: [pulseaudio] main.c: Found 8 CPUs.
I: [pulseaudio] main.c: Page size is 4096 bytes
D: [pulseaudio] main.c: Compiled with Valgrind support: no
D: [pulseaudio] main.c: Running in valgrind mode: no
D: [pulseaudio] main.c: Running in VM: no
D: [pulseaudio] main.c: Optimized build: yes
D: [pulseaudio] main.c: FASTPATH defined, only fast path asserts disabled.
I: [pulseaudio] main.c: Machine ID is 95303e48bec149d190471b0a51ab134e.
I: [pulseaudio] main.c: Session ID is c2.
I: [pulseaudio] main.c: Using runtime directory /run/user/1000/pulse.
I: [pulseaudio] main.c: Using state directory /home/ahc/.config/pulse.
I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-6.0/modules.
I: [pulseaudio] main.c: Running in system mode: no
I: [pulseaudio] main.c: Fresh high-resolution timers available! Bon appetit!
D: [pulseaudio] memblock.c: Using shared memory pool with 1024 slots of size 64.0 KiB each, total size is 64.0 MiB, maximum usable slot size is 65472
D: [pulseaudio] memblock.c: Using shared memory pool with 1024 slots of size 64.0 KiB each, total size is 64.0 MiB, maximum usable slot size is 65472
I: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1 SSE4_2 MMXEXT
I: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
I: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
I: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
I: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
I: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
I: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
D: [pulseaudio] database-gdbm.c: Opened GDBM database '/home/ahc/.config/pulse/95303e48bec149d190471b0a51ab134e-device-volumes.x86_64-unknown-linux-gnu.gdbm'
I: [pulseaudio] module-device-restore.c: Successfully opened database file '/home/ahc/.config/pulse/95303e48bec149d190471b0a51ab134e-device-volumes'.
I: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
D: [pulseaudio] database-gdbm.c: Opened GDBM database '/home/ahc/.config/pulse/95303e48bec149d190471b0a51ab134e-stream-volumes.x86_64-unknown-linux-gnu.gdbm'
I: [pulseaudio] module-stream-restore.c: Successfully opened database file '/home/ahc/.config/pulse/95303e48bec149d190471b0a51ab134e-stream-volumes'.
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1 added for object /org/pulseaudio/stream_restore1
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry1
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry2
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry3
I: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
D: [pulseaudio] database-gdbm.c: Opened GDBM database '/home/ahc/.config/pulse/95303e48bec149d190471b0a51ab134e-card-database.x86_64-unknown-linux-gnu.gdbm'
I: [pulseaudio] module-card-restore.c: Successfully opened database file '/home/ahc/.config/pulse/95303e48bec149d190471b0a51ab134e-card-database'.
I: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
I: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
I: [pulseaudio] module.c: Loaded "module-switch-on-port-available" (index: #4; argument: "").
D: [pulseaudio] alsa-util.c: Trying hw:1,3 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hw:1,3
I: [pulseaudio] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 23777 ms
D: [pulseaudio] alsa-util.c: Set buffer size first (to 88200 samples), period size second (to 88200 samples).
I: [pulseaudio] alsa-util.c: ALSA period wakeups disabled
I: [pulseaudio] alsa-sink.c: Successfully opened device hw:1,3.
I: [pulseaudio] alsa-sink.c: Successfully enabled mmap() mode.
I: [pulseaudio] alsa-sink.c: Successfully enabled timer-based scheduling mode.
D: [pulseaudio] module-device-restore.c: Database contains no data for key: sink:alsa_output.hw_1_3
D: [pulseaudio] module-device-restore.c: Database contains no (or invalid) data for key: sink:alsa_output.hw_1_3:null
I: [pulseaudio] sink.c: Created sink 0 "alsa_output.hw_1_3" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] sink.c: alsa.resolution_bits = "16"
I: [pulseaudio] sink.c: device.api = "alsa"
I: [pulseaudio] sink.c: device.class = "sound"
I: [pulseaudio] sink.c: alsa.class = "generic"
I: [pulseaudio] sink.c: alsa.subclass = "generic-mix"
I: [pulseaudio] sink.c: alsa.name = "HDMI 0"
I: [pulseaudio] sink.c: alsa.id = "HDMI 0"
I: [pulseaudio] sink.c: alsa.subdevice = "0"
I: [pulseaudio] sink.c: alsa.subdevice_name = "subdevice #0"
I: [pulseaudio] sink.c: alsa.device = "3"
I: [pulseaudio] sink.c: alsa.card = "1"
I: [pulseaudio] sink.c: alsa.card_name = "HDA ATI HDMI"
I: [pulseaudio] sink.c: alsa.long_card_name = "HDA ATI HDMI at 0xfe760000 irq 58"
I: [pulseaudio] sink.c: alsa.driver_name = "snd_hda_intel"
I: [pulseaudio] sink.c: device.bus_path = "pci-0000:07:00.1"
I: [pulseaudio] sink.c: sysfs.path = "/devices/pci0000:00/0000:00:0d.0/0000:07:00.1/sound/card1"
I: [pulseaudio] sink.c: device.bus = "pci"
I: [pulseaudio] sink.c: device.vendor.id = "1002"
I: [pulseaudio] sink.c: device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
I: [pulseaudio] sink.c: device.product.id = "aab0"
I: [pulseaudio] sink.c: device.product.name = "Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]"
I: [pulseaudio] sink.c: device.string = "hw:1,3"
I: [pulseaudio] sink.c: device.buffering.buffer_size = "352768"
I: [pulseaudio] sink.c: device.buffering.fragment_size = "176384"
I: [pulseaudio] sink.c: device.access_mode = "mmap+timer"
I: [pulseaudio] sink.c: device.description = "Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]"
I: [pulseaudio] sink.c: device.icon_name = "audio-card-pci"
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
D: [pulseaudio] module-device-restore.c: Database contains no data for key: source:alsa_output.hw_1_3.monitor
D: [pulseaudio] module-device-restore.c: Database contains no (or invalid) data for key: source:alsa_output.hw_1_3.monitor:null
I: [pulseaudio] source.c: Created source 0 "alsa_output.hw_1_3.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] source.c: device.description = "Monitor of Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]"
I: [pulseaudio] source.c: device.class = "monitor"
I: [pulseaudio] source.c: device.icon_name = "audio-input-microphone"
I: [pulseaudio] alsa-sink.c: Using 2.0 fragments of size 176384 bytes (999.91ms), buffer size is 352768 bytes (1999.82ms)
I: [pulseaudio] alsa-sink.c: Time scheduling watermark is 20.00ms
D: [pulseaudio] alsa-sink.c: hwbuf_unused=0
D: [pulseaudio] alsa-sink.c: setting avail_min=87310
D: [pulseaudio] alsa-util.c: snd_pcm_dump():
D: [pulseaudio] alsa-util.c: Hardware PCM card 1 'HDA ATI HDMI' device 3 subdevice 0
D: [pulseaudio] alsa-util.c: Its setup is:
D: [pulseaudio] alsa-util.c: stream : PLAYBACK
D: [pulseaudio] alsa-util.c: access : MMAP_INTERLEAVED
D: [pulseaudio] alsa-util.c: format : S16_LE
D: [pulseaudio] alsa-util.c: subformat : STD
D: [pulseaudio] alsa-util.c: channels : 2
D: [pulseaudio] alsa-util.c: rate : 44100
D: [pulseaudio] alsa-util.c: exact rate : 44100 (44100/1)
D: [pulseaudio] alsa-util.c: msbits : 16
D: [pulseaudio] alsa-util.c: buffer_size : 88192
D: [pulseaudio] alsa-util.c: period_size : 44096
D: [pulseaudio] alsa-util.c: period_time : 999909
D: [pulseaudio] alsa-util.c: tstamp_mode : ENABLE
D: [pulseaudio] alsa-util.c: tstamp_type : MONOTONIC
D: [pulseaudio] alsa-util.c: period_step : 1
D: [pulseaudio] alsa-util.c: avail_min : 87310
D: [pulseaudio] alsa-util.c: period_event : 0
D: [pulseaudio] alsa-util.c: start_threshold : -1
D: [pulseaudio] alsa-util.c: stop_threshold : 6205960286516543488
D: [pulseaudio] alsa-util.c: silence_threshold: 0
D: [pulseaudio] alsa-util.c: silence_size : 0
D: [pulseaudio] alsa-util.c: boundary : 6205960286516543488
D: [pulseaudio] alsa-util.c: appl_ptr : 0
D: [pulseaudio] alsa-util.c: hw_ptr : 0
D: [alsa-sink-HDMI 0] alsa-sink.c: Thread starting up
D: [alsa-sink-HDMI 0] core-util.c: SCHED_RR|SCHED_RESET_ON_FORK worked.
I: [alsa-sink-HDMI 0] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
I: [alsa-sink-HDMI 0] alsa-sink.c: Starting playback.
D: [alsa-sink-HDMI 0] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-HDMI 0] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [pulseaudio] module-device-restore.c: Database contains no (or invalid) data for key: sink:alsa_output.hw_1_3:null
I: [pulseaudio] module.c: Loaded "module-alsa-sink" (index: #5; argument: "device=hw:1,3").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-6.0/modules/module-udev-detect.so': success
D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC1 is accessible: yes
D: [pulseaudio] module-udev-detect.c: /devices/pci0000:00/0000:00:0d.0/0000:07:00.1/sound/card1 is busy: yes
D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
D: [pulseaudio] module-udev-detect.c: /devices/pci0000:00/0000:00:14.2/sound/card0 is busy: no
D: [pulseaudio] module-udev-detect.c: Loading module-alsa-card with arguments 'device_id="0" name="pci-0000_00_14.2" card_name="alsa_card.pci-0000_00_14.2" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"'
D: [pulseaudio] dbus-util.c: Successfully connected to D-Bus session bus 927ea15335ea5cfa45d57cb0555b4740 as :1.28
D: [pulseaudio] reserve-wrap.c: Successfully acquired reservation lock on device 'Audio0'
I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm/HDA ATI SB/HDA ATI SB.conf
I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card HDA ATI SB
I: [pulseaudio] (alsa-lib)main.c: error: failed to import HDA ATI SB use case configuration -2
I: [pulseaudio] alsa-ucm.c: UCM not available for card HDA ATI SB
D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/profile-sets/default.conf'
D: [pulseaudio] alsa-mixer.c: Looking at profile input:analog-mono
D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog Mono (analog-mono)
D: [pulseaudio] alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hw:0
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: [pulseaudio] alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hw:0
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: [pulseaudio] alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open plug:hw:0
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: [pulseaudio] alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open plug:hw:0
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
D: [pulseaudio] alsa-mixer.c: Caching failure to open input:analog-mono
D: [pulseaudio] alsa-mixer.c: Looking at profile input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog Stereo (analog-stereo)
D: [pulseaudio] alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open front:0
D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 23777 ms
D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples).
D: [pulseaudio] alsa-mixer.c: Profile input:analog-stereo supported.
D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-front-mic.conf'
D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common'
D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-rear-mic.conf'
D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common'
D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-internal-mic.conf'
D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common'
D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-dock-mic.conf'
D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common'
D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf'
D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf.common'
D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf'
D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common'
D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-linein.conf'
D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-aux.conf'
D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf.common'
D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-video.conf'
D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf.common'
D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-tvtuner.conf'
D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf.common'
D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-fm.conf'
D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf.common'
D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic-line.conf'
D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf.common'
D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common'
D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-headphone-mic.conf'
D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common'
D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-headset-mic.conf'
D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:0: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-front-mic'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Mic Jack' succeeded (found!)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Mic Phantom Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=1, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-rear-mic'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Rear Mic Jack' succeeded (found!)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Rear Mic Phantom Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=1, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-internal-mic'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Mic Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Dock Mic Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Mic Jack' succeeded (found!)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Rear Mic Jack' succeeded (found!)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Internal Mic Phantom Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Int Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Int Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-internal-mic', none of required-any elements preset.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-dock-mic'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Dock Mic Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Dock Mic Phantom Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-dock-mic', none of required-any elements preset.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input'
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' failed.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-mic'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Mic Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Mic Phantom Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Select' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost (+20dB)' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-mic', none of required-any elements preset.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-linein'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Jack' succeeded (found!)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Phantom Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=1, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-aux'
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' failed.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-video'
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' failed.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-tvtuner'
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' failed.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-fm'
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' failed.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-mic-line'
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' failed.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-headphone-mic'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Mic Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Auto-Mute Mode' succeeded (volume=0, switch=0, enumeration=1).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-headphone-mic', none of required-any elements preset.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-headset-mic'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headset Mic Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headset Mic Phantom Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Mic Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headset Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headset Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headset' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-headset-mic', none of required-any elements preset.
D: [pulseaudio] alsa-mixer.c: Available mixer paths (after tidying):
D: [pulseaudio] alsa-mixer.c: Path Set 0x1134570, direction=2
D: [pulseaudio] alsa-mixer.c: Path analog-input-front-mic (Front Microphone), direction=2, priority=85, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=46, min_dB=-16, max_dB=60
D: [pulseaudio] alsa-mixer.c: Element Capture, direction=2, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element Front Mic Boost, direction=2, switch=0, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=4, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element Input Source, direction=2, switch=0, volume=0, volume_limit=-1, enumeration=1, required=0, required_any=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
D: [pulseaudio] alsa-mixer.c: Option Front Mic (analog-input-microphone-front/analog-input-microphone-front) index=0, priority=0
D: [pulseaudio] alsa-mixer.c: Element Rear Mic Boost, direction=2, switch=0, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
D: [pulseaudio] alsa-mixer.c: Element Line Boost, direction=2, switch=0, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
D: [pulseaudio] alsa-mixer.c: Jack Front Mic, alsa_name='Front Mic Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Jack Front Mic Phantom, alsa_name='Front Mic Phantom Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Setting analog-input-microphone-front (analog-input-microphone-front) priority=0
D: [pulseaudio] alsa-mixer.c: Path analog-input-rear-mic (Rear Microphone), direction=2, priority=82, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=46, min_dB=-16, max_dB=60
D: [pulseaudio] alsa-mixer.c: Element Capture, direction=2, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element Rear Mic Boost, direction=2, switch=0, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=4, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element Input Source, direction=2, switch=0, volume=0, volume_limit=-1, enumeration=1, required=0, required_any=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
D: [pulseaudio] alsa-mixer.c: Option Rear Mic (analog-input-microphone-rear/analog-input-microphone-rear) index=1, priority=0
D: [pulseaudio] alsa-mixer.c: Element Front Mic Boost, direction=2, switch=0, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
D: [pulseaudio] alsa-mixer.c: Element Line Boost, direction=2, switch=0, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
D: [pulseaudio] alsa-mixer.c: Jack Rear Mic, alsa_name='Rear Mic Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Jack Rear Mic Phantom, alsa_name='Rear Mic Phantom Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Setting analog-input-microphone-rear (analog-input-microphone-rear) priority=0
D: [pulseaudio] alsa-mixer.c: Path analog-input-linein (Line In), direction=2, priority=81, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=46, min_dB=-16, max_dB=60
D: [pulseaudio] alsa-mixer.c: Element Capture, direction=2, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element Line Boost, direction=2, switch=0, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=4, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
D: [pulseaudio] alsa-mixer.c: Element Input Source, direction=2, switch=0, volume=0, volume_limit=-1, enumeration=1, required=0, required_any=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
D: [pulseaudio] alsa-mixer.c: Option Line (analog-input-linein/analog-input-linein) index=2, priority=0
D: [pulseaudio] alsa-mixer.c: Element Front Mic Boost, direction=2, switch=0, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
D: [pulseaudio] alsa-mixer.c: Element Rear Mic Boost, direction=2, switch=0, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
D: [pulseaudio] alsa-mixer.c: Jack Line, alsa_name='Line Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Jack Line Phantom, alsa_name='Line Phantom Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Setting analog-input-linein (analog-input-linein) priority=0
D: [pulseaudio] alsa-mixer.c: Looking at profile input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Checking for recording on Digital Stereo (IEC958) (iec958-stereo)
D: [pulseaudio] alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:0: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-mono
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Mono (analog-mono)
D: [pulseaudio] alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hw:0
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: [pulseaudio] alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hw:0
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: [pulseaudio] alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open plug:hw:0
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: [pulseaudio] alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open plug:hw:0
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-mono
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-mono+input:analog-mono - will not be able to open output:analog-mono
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-mono+input:analog-stereo - will not be able to open output:analog-mono
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-mono+input:iec958-stereo - will not be able to open output:analog-mono
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Stereo (analog-stereo)
D: [pulseaudio] alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open front:0
D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 23777 ms
D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples).
D: [pulseaudio] alsa-mixer.c: Profile output:analog-stereo supported.
D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf'
D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf.common'
D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-output-lineout.conf'
D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf.common'
D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-output-speaker.conf'
D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf.common'
D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-output-headphones.conf'
D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf.common'
D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-output-headphones-2.conf'
D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf.common'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:0: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-output'
D: [pulseaudio] alsa-mixer.c: Probe of element 'Hardware Master' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Master' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Master Mono' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Surround' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Side' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Center' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'LFE' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'CLFE' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'PCM' succeeded (volume=1, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'External Amplifier' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Bass Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'IEC958' succeeded (volume=0, switch=2, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'IEC958 Optical Raw' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Analog Output' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-output-lineout'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Phantom Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Front Jack' succeeded (found!)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Front Phantom Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out CLFE Jack' succeeded (found!)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out CLFE Phantom Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Surround Jack' succeeded (found!)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Surround Phantom Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Side Jack' succeeded (found!)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Side Phantom Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of element 'Hardware Master' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Master' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker+LO' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone+LO' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Master Mono' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line HP Swap' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone' succeeded (volume=2, switch=2, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone2' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Desktop Speaker' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Surround' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Side' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Center' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'LFE' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'CLFE' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Bass Speaker' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker Front' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker Surround' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker Side' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker CLFE' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'PCM' succeeded (volume=1, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'External Amplifier' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Bass Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'IEC958' succeeded (volume=0, switch=2, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'IEC958 Optical Raw' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Analog Output' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-output-speaker'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Dock Headphone Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Headphone Jack' succeeded (found!)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Front Jack' succeeded (found!)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Speaker Phantom Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Speaker Front Phantom Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of element 'Hardware Master' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Master' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Master Mono' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone' succeeded (volume=2, switch=2, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone2' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone+LO' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker+LO' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Desktop Speaker' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Speaker' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker Front' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Surround' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Surround Speaker' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker Surround' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Side' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker Side' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Center' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Center Speaker' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'LFE' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'LFE Speaker' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Bass Speaker' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'CLFE' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker CLFE' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'PCM' succeeded (volume=1, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'External Amplifier' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Bass Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'IEC958' succeeded (volume=0, switch=2, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'IEC958 Optical Raw' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Analog Output' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-output-speaker', none of required-any elements preset.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-output-headphones'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Dock Headphone Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Dock Headphone Phantom Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Headphone Jack' succeeded (found!)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Headphone Phantom Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Phantom Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Mic Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of element 'Hardware Master' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Master' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Master Mono' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker+LO' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone+LO' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headset' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line HP Swap' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone2' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Desktop S -
Show tech for 4000 series switch
All,
The issue is i have widespread network connectivity problems that seem to be pointing to a switching situation. Our SQL connectivity to 2 highly visible and mission critical applications are seeing hiccups which are basically screwing up data. I think i see some things but i want to get some other feedback.
A few tidbits of information: the counters were cleared a week or two ago.
Should the CPU utilization be this high on a 4000 series without seeing performance degradation as well?
Regards,
NateNate,
From my experience your CPU utilization doesn't look out of line. This document can help you troubleshoot high CPU usage.
http://www.cisco.com/warp/public/473/82.html
Also, what interface(s) are the systems connected to? Because I would look at the speed/duplex on both the switchport and the end device(s). Here's another Cisco document to help you.
http://www.cisco.com/warp/public/473/46.html
Steve -
Hello,
I have a question regarding the C series UCS.Is it possible as of now to connect it to the 6120 fabric manager and manage it from there like the blade series. Or are they only manageable through their CIMC port.
Deep.With the current 1.3.x code this is not possible. This feature will be available in 1.4 which is just undergoing QA and should be available in the next month.
Regards,
Robert -
Connecting Dual Monitors: HDMI & VGA to MacBook Pro (Non-Retina)?
Whats up Apple Fam,
So i have a MacBook Pro along with a LCD TV i use as an external monitor and its connected via Mini DisplayPort to HDMI adapter.
Now, i’d like to add an additional computer monitor, the cable coming out of it will be a VGA. Hence my question; what type of adapter will i need to accomplish my goal while achieving it at the lowest price possible?
My only concern is that the Mini DisplayPort is already being used by the LCD TV. So i’m a bit unsure what to do. Any help is appreciated. Thanks !You could purchase 2 mini displayport to DVI adapters ($30 ea) and use the 2 Thunderbolt ports. I have one external DVI monitor connected to 1 of my Thunderbolt ports. Works great!
Sorry my mistake. You said non-Retina. -
T410s/T410/T510 DP- HDMI, audio questions, survey
Hi,
after all the confusion concerning DisplayPort-audio and the T-series, I decided to find out for myself and test it at my local Lenovo dealer.
As my dealer had not a single HDMI and audio capable output device in his shop, I brought my own Medion MD 20226 LCD TV, which has 2 HDMI-in ports.
The idea was to use a 2m DisplayPort->HDMI-cable provided by the dealer in order to connect the T410s in question to my little TV.
Background: Due to the misleading information from Lenovo concerning the last generation T400s/T400/T500 models and their audio over DisplayPort issue (no audio at all), I expected to get a picture without any problems but that I would need to figure out how to enable the sound by changing some settings inside Windows 7.
What happened: Actually neither me nor my dealer were able to get ANYTHING out of the DisplayPort, when using the DisplayPort->HDMI-cable. There was NEITHER video NOR audio!
I should point out that at the time being my dealer only had T410s models without the (maybe) switchable NVidia graphics.
Another point that I want to emphasize is that, after 45 minutes of trying everything we could to make it work, we switched to the T510 that was standing right beside the T410s in his show room. Unfortunately I was too confused to ask what kind of graphics setup this machine had, but the result was the same: no video, no audio at the TV.
As it is apparent that there are quite a lot of confused Lenovo customers out there that have similar questions:
I HEREBY FORMALLY ASK FOR A DETAILED AND IN-DEPTH INVESTIGATION/CLARIFICATION OF POSSIBLE DP->HDMI, DP-AUDIO AND DP->HDMI-AUDIO ISSUES WITH THE CURRENT T410s/T410/T510 SERIES (all combinations of graphics cards).
Of course I think that it would be best if one of the Lenovo engineers would take care of that in one of the Lenovo blogs.
But until then, it might be a good starting point to ask those of us, who already have a T410s/T410/T510.
So I just start right away:
MODEL: T410s (NUK39GE / 2912-39G)
used GPU: Intel GMA 5 / QM57
DP->DP-video: not tested
DP->DP-audio: not tested
DP->HDMI-video: tested->not working
DP->HDMI-audio: tested->not working
As I said, I was only able to test it at my local Lenovo dealer and I gave up after around 1 hour of testing. So it might be, that someone who has more time and resources (different adaptors) might be able to get it running.
So to all of you out there with a new Tx10(s), please take the time, find your next HDMI-TV and try it.
And to Lenovo: as long as there is no official statement concerning this, I will keep asking for an official response ;-) (and THIS time, don't blame the chipset, as the new Intel-Calpella has all the HD-video/audio goodness one could ask for: wiki article on Intel Calpella and its DP features).
Thanks for reading all this!Hello all,
please check out this thread too.
Where Ken (Lenovo staff) explains this feature and possible problems.
I would suggest to do a forum search before starting another thread.
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español -
HDMI, VGA and Macbook multiple monitors?
Hi there,
Hope you guys can help,
Don't know if this is possible and have been browsing the internet for a while looking for a solution.
In my home studio I have a PC flat-screen monitor and am buying a HDTV. I would the HDMI and Monitor to act as an extended monitors for my macbook pro.
This setup would allow me to use each screen for a different function, e.g. Daw, Video, File viewer.
hope someone can let me know if this is possible, any help is appreciated!
Thanks
JonnyI have a similar question. I'd like to run 2 or 3 different monitors simultaneously off my MacBook Pro in the office, including a typical 21 inch monitor and a Samsung 40 inch HDTV.
I'd like to be able to to clone the laptop screen on to one 21 inch monitor, extend the desktop on to a second 21 inch monitor, and extend it further or clone the second extended monitor on to the 40 inch monitor. The 40 inch monitor probably operates at a different resolution than the 21 inch monitors.
I've been looking at different possible alternatives for equipment to accommodate this. I've heard about:
the Maxtor DualHead2Go Digital Edition Dual Monitor Stretcher with DVI Output ($230), http://www.markertek.com/Cables-Connectors-Adapters/Video-Adapters/VGA-Adapters/ Matrox/D2G-A2D-IF.xhtml
and the Arkview USB-DH88 PC-to-TV Multi-Display Video Adapter - USB 2.0 to DVI/VGA/HDMI, 1400 x 1050, http://www.tigerdirect.com/applications/searchtools/item-Details.asp?EdpNo=39215 59&sku=M501-1285&SRCCODE=WEM1993BY&cmmmc=Email-_-Main-_-WEM1993--tiger ($55)
There may be other choices. Anybody know whether these will work for what I want to do? -
How do you setup HDMI audio with "Nvidia Quadro 4000 for Mac"?
So I just purchased a new Mac Pro:
Mac Pro (5,1) 3.33 GHz 6-Core
8 GB Ram
ATI Radeon HD 5770
1TB HDD
OS 10.8.3
I also purchased a new Nvidia Quadro 4000 for Mac Graphics Card because the 3D animation software I'm using (Blender) requires this card to accelerate render times.
I have installed the card and all is working well as far as I can tell except for the HDMI audio. According to the specs on Nvidia for this card, it DOES support HDMI audio through the Display port. I have my HDMI cable plugged up and the video works great. However the audio option does not show up in the System Preferences. (Here is the page for the graphics card. Look under "specifications" at the bottom for the audio part. http://www.nvidia.com/object/product-quadro-4000-mac-us.html).
I did find a link for a kernel addition for HDMI audio but it stated "non-Apple Nvidia cards" and this one is specifically for Mac. Here is that link: http://forums.macrumors.com/showthread.php?t=1499797. (I also plan on posing the same question there.)
The reason I want the HDMI to work is I'm using a TV as my monitor.
Now I did try the HDMI with the ATI Card and both the audio and video work great.
What I did for a quick work around is install both cards and use the GPU processor on the Nvidia for the animation program and use the ATI for the actual port and this fixes the hdmi audio issue. However this takes up pretty much all of my PCI slots and seems like a waste of space and power.
Has anyone else run into this problem and found a solution?? Any guidance would be greatly appreciated.
Thanks!I went ahead and tried that extension that I found. It worked!
I guess Mac just didn't include the audio support in the driver that it includes. Below is were I found the instructions and download. It includes a shell script that installs the kernal from the Terminal prompt. The instructions were clear and installed with out a hitch. There were also instructions to remove it if there were issues.
Here is the link:
http://forums.macrumors.com/showthread.php?t=1499797
Thanks again and hope this helps.
Maybe you are looking for
-
My PC (aka POS***) crashed and I knew it was going to happen sooner rather than later, so I backed up my music onto an external hard drive. I failed to back up my music regularly and I have lost a month's worth of purchases. Is there any way to get t
-
Where can I find detailed Release Notes?
We are performing transition from 5.5 to 7.0. We do not need full description, it is too large. Just differences from the previous version.
-
EP Implementation with two different CRM client on same EP environment
Hi All, I have the following scenario We want to use same EP instance for connecting to two different clients in ECC 6.0 system (say Client 100 and 200 ). But we also want to use Single Sign On. Then my problem is 1. When I am logging on to EP throug
-
I forgot answers to security questions itunes support is useless I need to talk to someone on the telephone is there a number to call
-
After update, no more flickering but aliasing issues. Sotware also very slow to load and run project. Scrubing impossible. Any ideas ? TX !!!!