HDOne or EVO HD

They seem almost identical. Which would you prefer and why? I primarily edit HDV-ProRes and occasionally DVCProHD.
If I purchase an 8 bay with only 2 or 4 drives in it, what is the process for adding other drives? They have to be added before data is written or else you lose everything correct? Also, as long as they have the same storage capacity, rpm's & cache, it doesn't matter the brand, correct?

It comes with 8 250GB drives?
Yup.
Do you know specifically which drive they ship with?
I believe HITACHI...but you have to ask them.
I feel like it would be a lot more cost effective to order the 2TB HDOne and replace all the drives with 1.5TB and make it a 12TB system.
UH oh...here we go...
If I could order 8 1.5TB drives for under $1500, why does the price of the HDOne increase by $4,000+ when you go from the 2TB to the 12TB unit?
Firmware....tech support...solid system. These are highly engineered, well researched systems. A lot of testing and software engineering and hardware engineering done to make sure that the Raid enclosure is fast and stable. Plus they offer enterprise class tech support. If you want to roll your own raid, there are plenty of other options out there. But then you are building it yourself, and when it comes to tech support, you have three vendors...the maker of the RAID card, the maker of the RAID case, the hard drive manufacturer....and all of them will point fingers at the other guy. Plus the units might not be as fast or stable as the one by CalDigit or MaxxDigital.
But, if you want a roll your own, feel free. I have done it myself.
Shane

Similar Messages

PTCL EVO USB Device Installation and Configuration (EVDO CARD)

*PTCL EVO Installation on MAC Book PRO , Mac Book Air EVO*
Problem:
USB not getting detected on MAC book pro and Mac book Air.
Resolution:
*DO not Insert the EVO CARD until you perform the below:*
*Getting the driver:*
*Option 1 :*
http://ptcl.com.pk/contentb.php?NID=327#drivers
Select the device you have and download MAC driver from the download section on the page.
*Driver Option 2:*
ON windows os insert the EVO device detect the USB disk with drivers one of the driver is for MAC (dmg file) copy it on a simple Flash disk.
*Installation on MAC:*
Double click the downloaded driver (Option 1)
run the setup.
or
on your MAC Insert the Flash Disc on which you copied the driver (Option 2) it will detect a media storage and then run the driver from there. Once you have the driver installed you will see an EVDO Icon in the menu.
*NOW insert the EVDO USB in MAC it will be detected as a modem / network device.*
*TRICKY PART:*
EVO software does not work on MAC so you need to configure a manual connection.
Go to network settings from the top panel under WIFI click advance settings. A new menu opens up you will see 3 or 4 new devices. you need to configure the EVDO Card Terminal only thats the first in the list.
*Do not configure any other device.*
*Config Settings:*
phone number: #777
User: [email protected]
Password: ptcl
*Do not change any other settings.*
Click connect and within seconds it will connect.
It works fast and reliable for all wimax services location is very important it is dependent on the signal strength. EVO is the best choice for people on the go as it works across Pakistan in 350 cities. no other service can match this.
Please note I am not from PTCL or any affiliation with them. Check my website for more details…
+*H A P P Y - S U R F I N G*+

Hey Mark
You didn't happen to change the IOMMU setting in the UEFI did you? I have just got a M5A97 EVO and been having problems.
This UEFI interface finds the usb devices fine but the kernel will not. I found that if I flash the bios it reset things and appears to
just compare the flash if it is the same. Afterwards the usb works. However I still trying to narrow it down myself. I've tested with
0402 0810 & 0813 just released. All do the same thing with regards to usb 2.0.
Jonathan
EDIT:
After testing it appears to be connected to the linux nvidia blob & IOMMU settings conflicting.
Last edited by jeisom (2011-11-23 15:00:00)

Z87-G45 Gaming not able to install Win7 x64 with Samsung 840 EVO

I have a brand new:
i5 4570
MSI Z87-G45 Gaming
250GB Samsung 840 EVO
1x 8GB Corsair ValueRam DDR3 1600
I got everything hooked up properly, but I am not able to install Win7 x64 through an USB pen drive (Kingston Datatravel 32GB USB3) I have a proper official and Legit MSDN ISO, formatted by the Win7 USB tool from MS itself.
Note that i do not have an optical device (DVD) installed so I cannot use it 'the old way'.
Bios settings are okay, everything is recognized
USB Legacy - Kingston Datatraveler
HDD Legacy - Samsung 840 EVO
Win7 setup loads properly; but before I can select the Harddrive / SSD to install Win7 on I get prompted that additional (3rd party) drivers are needed to proceed. The volume is not recognized. This happens 9 out of 10 times. In the 10% cases I do get the option to format the SSD and/or create partitions. However, installation fails after all, cannot load or find file ...
What I've tried so far:
Switch out the SATA cables and power cables
Switch through the various SATA ports on the MB 1 through 6
Tried UEFI and UEFI/Legacy (UEFI doesn't seem to work at all)
Update UEFI to V 1.50
All the above result in the case mentioned.
I have succesfully installed the SSD in an other PC, using the same pen drive and ISO and it worked like a charme, thus ruling out that the SSD, pen drive or image is corrupt.
Even when I switched out the SSD after Win7 setup has succesfully copied, unpacked and installed all the files (doing this on the other machine where it works like a charm). Then switching it to the MSI Z87...it fails; starting the setup procedure right from the start, like nothing was ever written on the SSD...
Finally i turned to Win8, and guess what, it installed without any glitches on the MSI Z87
What am I missing here, I would really want to install Win7 instead of Win8
Forgot to enable / disable something in the UEFI? I really don't know, google doesn't give much information on this specific problem (SSD is recognized properly by the BIOS / UEFI as far as I can tell)
The only thing I have not tried out so far is updating the Samsung SSD firmware to the 1.0 version which has been release 3 days ago...
Any clues, tips, hunches??

Quote from: Bernhard on 25-October-13, 18:33:41
Did you disable Secure Boot in the BIOS? If not, then Win7 won't load.
Hmmm not sure, thanks for the reply, will have to look into that later today!
I didn't change it from the default setting I think, unless it is part of the Win8 features in the UEFI. All where disabled by default, and I kept them disabled.
Where is Secure Boot listed in the UEFI, and any idea wether it is enabled by default?
::EDIT::
Found it in some screenshots, I cannot recall from the top of my head wether it was enabled or disabled, allthough my gutt feeling says it already is disabled.
http://cdn.pcper.com/files/imagecache/article_max_width/review/2013-05-31/09-MSI_SnapShot_23.gif
http://cdn.pcper.com/files/imagecache/article_max_width/review/2013-05-31/10-MSI_SnapShot_24.gif
Nice overview of the entire UEFI btw: http://www.pcper.com/reviews/Motherboards/MSI-Z87-GD65-Gaming-Motherboard-Review/BIOS-Features-continued

Memory Problem With 4gb Crucial Ballistix and Asus M4A785TD-V EVO

motherBoard: ASUS M4A785TD-V EVO
bios Version :2005
Video: amd hd5750
Processor: AMD PHENON II X2 550 3.100MHZ
Memory: Crucial
Modele Memory: blt4g3d1608dt1tx0
Capacity: 4GB
greetings to all
i have asus m4a785td-v evo mobo. i ve bought 4 gb crucial ballistix ram today. it says on product its 1600 mhz and cl8 but it shows on my pc 1333 mhz and cl9. when i was searching for this problem i came across this topic: http://forum.crucial.com/t5/Crucial-Ballistix-gaming-memory/Memory-Probleme-With-8GO-Crucial-Ballistix-and-Asus-M4A785TD-V/td-p/9464 can i apply the same settings? how can i fix that? is it possible via bios settings? thx in advance and sry for my bad english. here is some screenshots:

I am not good at RAM setting but the 'Timings Table' shows there is XMP-1600 profile available so I believe it would be enough to turn on that memory profile in BIOS.

Is my "Samsung SSD 850 EVO 500GB" defective (or just incompatible with MacBookPro5,5 Yosemite 10.10.2 - 13 inch mid-2009)

Is the Samsung 850 EVO not compatible with this MacBook Pro? Has anyone installed it and found it to work fine for a few months?
Has anyone faced boot-partition corruptions, problems when installing Yosemite updates with this SSD - on reboot, SSD partition became unmountable for me after the installing Yosemite update 10.10.2 (14C1510).
I am trying to understand whether
mine happens to be a defective drive - in which case I have the option of getting a refund from seller and ordering a replacement (same make+model), OR
I should return this one and go for a Crucial/OWC/other SSD
Details:
MacBookPro5,5 Yosemite 10.10.2
Samsung SSD 850 EVO 500GB
I purchased this drive and installed it in my MacBookPro about a week ago.
Since then I have repeatedly run system-reported data corruptions on the SSD.
One obvious sign of the corruption is that on powering-on the laptop, it will stall for a long time (5 to 30 minutes! - normally it would boot up in about 30 seconds) after the grey/black Apple-logo and status bar appear on the white-background boot-screen.
Another way I see this is by running Disk Utility's 'verify disk' operation.. Reports serious errors and asks me to reboot in recovery-mode with Cmd-R to repair the partition.
I have erased and re-installed the OS (Yosemite) several times on it already because sometimes the Recovery-Partition's Disk Utility cannot repair the errors - asks me to backup and erase+format. The repair operation does not always succeed *.
This is happening often and without any pattern **.
Several times on the latest install, I have booted up in single-user mode and run fsck -fy: till yesterday, this was still occasionally finding and successfully repairing issues (after which I run fsck a couple more times to confirm).
Seems to be running fine today.
* I am re-installing off of a TimeMachine backup.
But I don't think that is causing the trouble: verify-disk on the original backup reports no errors, and even the computer itself passes "verify"/"fsck -fy" several times over before failing in the same way again after an hour or 2 of actual use.
** On one occasion, after an OS update (latest OS X security patches) succeeded and reboot completed, verify-disk again asked for the Cmd-R recovery-mode repair - which failed to repair the errors.
Also, if I as much as launch the Yosemite installer while booted up, then even after quitting (without proceeding beyond the initial screen), the SSD fails completely again requiring to be erased. Happened twice with installers involved, but corruptions even without installers did happen.

I loaded the Samsung 850 into my 2012 i5 Macbook Pro and it's been working well since I installed a few days ago. The only concern I have is that on boot up I get a white screen for around 30 seconds before it begins the startup with the apple and progress bar. That's odd, because when I installed an SSD on my older 2009 Macbook a few years ago that laptop booted up almost instantaneously when I pushed the power button.
I loaded the system on the SSD by cloning, rather than using Time Machine and it worked without a hitch. Used Carbon Copy Cloner in trial mode after formatting the SSD with Disk Utilities. Not sure if your problem may stem from using Time Machine. The cloning apps will usually adjust the data on the new drive based on available space, so if your SSB is a different size than the original HDD, it would automatically correct. Not sure about TIme Machine.
I'll keep researching about the startup lag when I turn on my Macbook Pro with the 850. Seems it should boot up right away with the SSD, but maybe it's because the 850 uses the new vertical stacking configuration. That's the only thing I can think of that's different from the last SSD I installed in my old Macbook.

Connecting EVO headset to a bluetooth laptop

We have seen quite a number of requests lately on members asking how to connect their EVO headsets wirelessly (via bluetooth). Hence, we have decided to create a thread that will serve as a resource for those who have difficulty pairing their headset with their laptops. Hopefully, this will be of help to others.
We encourage everyone to chime in, share your set-up and include the steps on how you manage to pair it.
Here are some of the set-ups we have tried:
Laptop model: Thinkpad T61
OS: Vista
Headset tested: EVO ZxR, EVO Zx, EVO Wireless
Normal pairing on the ZxR and Zx worked without issues (turn on the pairing mode on the headset, turn-on bluetooth on the laptop, search and pair bluetooth devices). On the other hand, there was a bit of a hitch pairing the EVO Wireless headset. What we did was go to the manufacturer's website and update the driver (here, you have to know the model number of your laptop to be able to see your bluetooth device manufacturer in order to install the right driver). After installing the bluetooth driver, pairing the headset was a breeze. During our test, there were two bluetooth drivers that showed up when we updated the driver; thinkpad bluetooth and microsoft bluetooth. Apparently, microsoft's driver didn't work. What worked was the Thinkpad bluetooth driver.
Laptop model: ASUS K438
OS: Win 7
Models tested: EVO Zx, ZxR
The headset connected without issues. After successfully pairing the headset, we tried switching between HFP (Skype call) and A2DP (music playback) . Switching between the two was seamless. Although during the test, there was one time the audio stopped when we tried pausing a video playback but eventually, it was fixed via reconnecting the headset. Other than that, it was all good.
Laptop model: Dell
OS: Win 7 - 64 bit
Model tested: EVO ZxR, EVO Zx
Pairing went through without issues. Bluetooth driver for this laptop was Qualcomm Atheros. Although the pairing was smooth, we encountered slight problems with the playback. Sometimes, the rotary volume (on the headset) and the master volume are not in sync and the mic at 100% is not quite loud enough. Also, we encountered a no-audio issue when clicked on "next" on WMP but was easily be fixed by closing the WMP and playing the audio again. Other than this, the headset worked great. Auto connect worked without issues and audio streaming was stable (even tried leaving the headset overnight).
Laptop model: Lenovo
OS: Win 8 - 64 bit
Model tested: EVO ZxR, EVO Zx
No issues encountered during bluetooth pairing. Playback was seamless. Although there was one instance where the bluetooth got disconnected during WMP playback and the earcup's LED just blinked in blue. We managed to get the headset working again by powering it off then turned it back on. Bluetooth auto-connected itself. The BT disconnect happened only once and haven't successfully tried reproducing the issue. By the way, the laptop's BT driver is realtek.
Laptop model: HP Sleekbook
OS: Win 8
Model tested: EVO ZxR
At first, the headset did not connect to the sleekbook. What we did was find out the make and model of the bluetooth chipset by going into the device manager. Once we got the make and model, we then googled the driver. After the driver was updated, pairing the sleekbook and the headset went well without issues.
Laptop model: DELL latitude E5400
OS: Win 7 - 32 bit
Model tested: EVO ZxR
Same issue as the sleekbook. Headset paired only after updating the driver.

Nice post!

MSI GT70 0NC 494 - Samsung 840 Evo Problem

I recently brought a Samsung 840 Evo 500GB to replace the WD Black HDD on my MSI GT70-0NC-494 laptop. OS is Windows 8. Im going type out pretty much how I ended up to where I am right now in hopes that maybe someone could catch where I went wrong.
So here's the story:
The cloning process went smoothly and I was able to load the OS from the SSD without any problems. Then I immediately updated the firmware and I set the optimizations using the Magician software.
I ran CrystalDiskMark and had speeds around ~300MB for both read and writes on the sequential test. Thought that my speeds were kind of slow when comparing them to the others I've seen. AHCI is on. I know my laptop has a SATA 2 and SATA 3 slot but I did plug the SSD in the SATA 3. SATA 3 connection is confirmed through Intel RST application and Samsung Magician. The speed is just not around the ballpark of what everyone is getting.
Ok, let's see the speeds with Rapid Mode so I turned on Rapid Mode and restarted. Then I get a "Start PXE over IPv6/4" message which then leads to the BIOS screen. Turn off laptop, turn it on, and get the same message. Turn off laptop again, turn it on, and the OS loads this time.
I thought that was weird but whatever I got to the OS, I thought. Open up Task Manager to see how Rapid Mode affects my RAM capacity since my regular usage already puts me ~1.5GB below max. 1.9GB shows up on RAM. Thought I'd be starting closer to 3GB. Then again, Im not entirely sure on how Rapid Mode works so whatever. Run the benchmark test through Magician software.
(This pic was from after I reinstalled Win 8 but the performance drop was similar)
Ok, , the read speeds is now garbage. Did the test on CrystalDiskMark and it shows similar results. It was late at night and Im feeling tired so I keep my laptop idle overnight to see if that would help. Nope, read speeds are still garbage. Surprisingly enough, CrystalDiskMark would show write speeds for sequential hitting ~1000MB/s so it seems that the write process is somewhat fine. The read process seems like it's broken.
So I turn off Rapid Mode and see if that fixes my read speeds. Restart. Get BSOD on startup. Turned laptop on and off multiple times to see if anything works but no avail. Thankfully I created a set of recovery disks 2 days ago so I immediately run that now. I was planning to restore the OS to factory install anyways so its fine.
OS is restored. At this point Im scared of installing the Samsung Magician software so I make a restore point. This time I want to see what happens if I install the software and run Rapid Mode through Win 8.1.
Seems like I can't just upgrade to 8.1 without installing a bunch of updates first so I do that. I got impatient so I went ahead and installed Magician and did the optimizations. CrystalDiskMark showed ~300MB/s for read and ~400MB/s for write. Ran the Magician benchmark and it produced the light blue bars on the screenshot above.
Let's try Rapid Mode now. Turn Rapid Mode on, restart, and I am again greeted with the "Start PXE over IPv6/4" message before hitting the BIOS. Now Im telling myself that I messed up again. Turned off the laptop and turned it on. OS is back. Awesome, only 1 try.
Did benchmarks on Magician which again showed that my read speeds were garbage (dark blue bars). I'm not even going to touch Rapid Mode for fear of having to reinstall the OS again. So now Im trying to upgrade to Win 8.1 and see if that fixes something.
Download 8.1, restart, I get some BSOD message with the code "0xC1900101 - 0X20017", restart through BIOS, and I get an error saying that 8.1 failed and Im being reverted to 8. Desktop loads up, I check Magician and my 840 Evo doesnt even appear on the drop down list. The software even says Rapid Mode is disabled even though I can see the Rapid Mode service through task manager.
Now Im just running tests, and restarting the laptop to install additional Windows updates. Upgrade to Windows 8.1 actually went through this time. After the update, Magician now says that Rapid Mode is on and my SSD again appears to be selectable. Read speeds seems to have gotten a *tiny bit* better but it is still extremely low.
Decided to say screw it, disabled Rapid Mode, restarted, again with the "Start PXE over IPv6/4". Turn off laptop, turn on, surprisingly no BSOD saying my system is forever broken. Now Im trying to see if I could salvage the performance back through messing with the settings so I followed most of the advice on another website.
Now it seems that the write speed is consistently good, but again the read speeds are absolutely horrid. I used AS-SSD for the benchmark instead of CrystalDiskMark this time.
And that is where I am right now. I am very sorry that the post is ridiculously long. I've been constantly looking around the internets to see if anyone has the same problem as me and I couldnt find a solution. I wanted to somewhat be detailed with my process so I can know whether this problem is the software or the MSI hardware. Or if the problem is with my specific SSD and that I'd have to RMA it.

How did you go about installing Windows?
It looks like the first time you used some software that ended up cloning it from the HDD to the SSD. That's a no-no in general, and I'd never trust it to work well.
Then the next time, you say you restored it. But you don't say if that was from the SSD/HDD or from recovery media that you had generated.
I'll be perfectly honest, I'd only trust installing from Recovery media when it comes to installing a new drive.
I'd say to do that. Install from Recovery media and see if that fixes the problem.
I will also say that a number of users have had issues with the Samsung 840 drives. Most of them were using the Samsung 840 Pro drives, not the EVO's, but just something to keep in mind. They were only able to get them to operate at SATA2 speeds.

My mid 2012 Macbook Pro get a 4HDD/11/40000000: Sata(0,0).I just upgraded to a samsung 850 evo 500 gb ssd and i used super duper to clone it?

I had no problems with my computer until someone told me to check apple's hardware test and now this code has me worried. Should I contact samsung about this and get a replacement drive or is it just apple doing it because its not from apple. One minor problem i had is when i shut the cover and then plug it in it sometimes crashes and gives me a kernel panic when i turn it back on. I just repaired my drive in disk utility and it hasn't helped now it crashes more!
HELP!!!!

I read it and i have been documenting the past two times it has had a panic attack and i saved the logs it gave me
System uptime in nanoseconds: 10356952884659
last loaded kext at 8121214690216: com.apple.filesystems.smbfs 3.0.1 (addr 0xffffff7f8de6e000, size 389120)
last unloaded kext at 583227228664: com.apple.filesystems.msdosfs 1.10 (addr 0xffffff7f8de6e000, size 61440)
loaded kexts:
com.symantec.kext.SymAPComm 12.7.1f4
com.symantec.kext.fw 5.3.1f4
com.symantec.kext.ips 3.10.2f23
com.symantec.kext.pf 5.7.1f4
com.symantec.kext.internetSecurity 5.4f4
com.apple.filesystems.smbfs 3.0.1
com.apple.driver.AudioAUUC 1.70
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.3.4f4
com.apple.driver.AGPM 110.19.5
com.apple.driver.X86PlatformShim 1.0.0
com.apple.driver.AppleOSXWatchdog 1
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleUpstreamUserClient 3.6.1
com.apple.driver.AppleHDA 272.18
com.apple.driver.AppleLPC 1.7.3
com.apple.driver.AppleMikeyDriver 272.18
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.4f4
com.apple.driver.AppleThunderboltIP 2.0.2
com.apple.driver.AppleBacklight 170.7.4
com.apple.driver.AppleMCCSControl 1.2.11
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleHV 1
com.apple.driver.AppleIntelHD4000Graphics 10.0.6
com.apple.driver.AppleIntelFramebufferCapri 10.0.6
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleSMCLMU 2.0.7d0
com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleIRController 327.5
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 36
com.apple.iokit.SCSITaskUserClient 3.7.5
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.7.1
com.apple.driver.AppleFWOHCI 5.5.2
com.apple.driver.AppleUSBHub 705.4.2
com.apple.driver.AppleSDXC 1.6.5
com.apple.driver.AirPort.Brcm4360 930.37.3
com.apple.driver.AppleAHCIPort 3.1.2
com.apple.iokit.AppleBCM5701Ethernet 10.1.3
com.apple.driver.AppleUSBEHCI 705.4.14
com.apple.driver.AppleUSBXHCI 710.4.11
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 3.1
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 3.1
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0
com.apple.nke.applicationfirewall 161
com.apple.security.quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 218.0.0
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 11
com.apple.driver.DspFuncLib 272.18
com.apple.kext.OSvKernDSPLib 1.15
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.4f4
com.apple.driver.AppleSMBusController 1.0.13d1
com.apple.driver.AppleHDAController 272.18
com.apple.iokit.IOHDAFamily 272.18
com.apple.iokit.IOAudioFamily 203.3
com.apple.vecLib.kext 1.2.0
com.apple.driver.AppleBacklightExpert 1.1.0
com.apple.iokit.IOBluetoothFamily 4.3.4f4
com.apple.iokit.IOSurface 97.4
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IOAcceleratorFamily2 156.14
com.apple.AppleGraphicsDeviceControl 3.10.22
com.apple.driver.IOPlatformPluginFamily 5.9.1d7
com.apple.iokit.IOUSBUserClient 705.4.0
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0
com.apple.driver.AppleSMC 3.1.9
com.apple.driver.AppleUSBMultitouch 245.2
com.apple.iokit.IOUSBHIDDriver 705.4.0
com.apple.driver.AppleUSBMergeNub 705.4.0
com.apple.driver.AppleUSBComposite 705.4.9
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.5
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.driver.AppleThunderboltDPInAdapter 4.0.6
com.apple.driver.AppleThunderboltDPAdapterFamily 4.0.6
com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.5
com.apple.iokit.IOFireWireFamily 4.5.6
com.apple.driver.AppleThunderboltNHI 3.1.7
com.apple.iokit.IOThunderboltFamily 4.2.2
com.apple.iokit.IO80211Family 730.60
com.apple.iokit.IOAHCIFamily 2.7.5
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.driver.mDNSOffloadUserClient 1.0.1b8
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOUSBFamily 720.4.4
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 396
com.apple.iokit.IOStorageFamily 2.0
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 3.1
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.Libm 1
com.apple.kec.pthread 1
com.apple.kec.corecrypto 1.0
Model: MacBookPro9,2, BootROM MBP91.00D3.B08, 2 processors, Intel Core i5, 2.5 GHz, 8 GB, SMC 2.2f44
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x859B, 0x435434473353313630424D2E4D3136464B44
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x859B, 0x435434473353313630424D2E4D3136464B44
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF5), Broadcom BCM43xx 1.0 (7.15.166.24.3)
Bluetooth: Version 4.3.4f4 15601, 3 services, 18 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: Samsung SSD 850 EVO 500GB, 500.11 GB
Serial ATA Device: HL-DT-ST DVDRW GS31N
USB Device: Hub
USB Device: Hub
USB Device: IR Receiver
USB Device: Apple Internal Keyboard / Trackpad
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Hub
USB Device: FaceTime HD Camera (Built-in)
Thunderbolt Bus: MacBook Pro, Apple Inc., 25.1
I think it is the norton i got from comcast for free so i am going to uninstall all the files that are associated with it and see how that goes

Adobe Photoshop Touch for HTC EVO View 4G ?

Hello, I was really excited to use the Adobe Photoshop Touch App for my Android Device. I purchased the HTC EVO View 4G for Sprint and I tried to find the App but I does not seem to be compatible with my device! This is a HUGE disappointment :(. I believe it is not compatible because #1 the screen resolution is 1024 x 600 and #2 a screen size of 7". I chose this device because it has the best specifications in its portable size, not to mention the pressure sensitive stylus . Please don't leave this category out! I need this app hahah, but seriously.
Will Adobe ever make the Adobe Photoshop Touch App available for the HTC EVO View 4G?

Hi AFlo00,
Sorry to hear it doesn't work with your device. We've had others say something similiar, my advice would be add your vote (and any comments if needed) here.
http://forums.adobe.com/ideas/1065
-Dave

Palm needs a new device for summer on sprint after HTC Evo announcement.

First, I am a loyal Palm fan and believe web OS is the best mobile OS on the market to date. No one is close to the ease of use of the OS and the pure genius of getting updates out and innovating and improving so quickly. With that said, if you know about the HTC Evo and its specs, you tend to think the Pre is a drag. A webOS device with a 4.3 inch screen would be quite the experience and with a better camera for nice HD video and HDMI out, it would be awesome with the new editing feature. The most important thing is the processing speed. If webOS was super slick with a snapdragon processor it would be a no brainer to pick this phone over any phone currently on the market. Palm if you are listening, the palm pre was a great device and the pre plus only made it better. It needs to go further and quickly.

+1. I feel the WebOS is far superior to Android but Palm is falling behind. I recently added a patch that makes my Pre way faster and is even more stable than without it. Many of us that got our Pre will be up for our Premier upgrade in June and we need Palm and Sprint to give us something to keep up us using the Pre. With other carriers now carrying the Pre Plus and Pixi Plus why can't Sprint carry the same. Maybe even a 4g version. At this point if Palm has not even launched a rumor about a next generation Pre on the Sprint network I may be jumping on the Evo bandwagon. I hope this thread is read and taken seriously. There is huge hype on the Evo and Palm needs to attack.

Advice on SSD migration a 9,2: Crucial BX 100 vs Samsung EVO

Hi, The Samsung EVO 500 GB on paper looks better than the Crucial BX 100 500 GB in terms of SSD drives. They're at the same price point. I was wondering if anyone could weigh in on which drive would be better for migration on a 9,2 (late model 2012).
I'm on 10.8.5 and my MBP has been running hot lately. I plan on cleaning the fan but ever since I've had it I've had RAM issues in which running multiple apps and/or having more than one external drive attached sucked the life out of the machine I upgraded to 8GB ram when I first go it, but I hear that 16 GB isn't worth the upgrade so I thought I'd move to an SSD. Now I'm using both Memory Cleaner and SMC just to keep the latest version (except for the OS) running smoothly.
This sort of started out of the blue- I noticed that FF was a drawing too much RAM and I switched to Chrome which I know Chrome is a also huge Ram suck but onetab is saviour in keeping a browser open. Along with Chrome, I typically have Excel and TextEdit, and drop down to roughly 1GB of RAM and can't keep an additional program open (Photoshop/Word/VLC) without constantly having to clean the RAM using memory cleaner and turning the fans way up using SMC.
Sorry, I'm not updating to Yosemite. I never upgrade to the 1st of anything. In didn't upgrade to Mavericks because that sounded to buggy to me- and that isn't even available anymore.
Advice and thoughts would be much appreciated.
Also, any advice on the migration when I actually do it? Clone Copy, etc. . .
Thanks in advance. I appreciate all the help I can get. Best. A

I want to join in the converstation here, cause I also have a MacPro [5,1] 3.2 Quad-Core with 12GB ram and was hoping to talk to people with the same system about internal SSD drives.
I have 3 different 1TB SATA drives already installed...
1 Mavericks [boot/system]
1 Snow Leopard [boot/system]
1 [strictly storage]
And I was thinking of intalling a SSD [maybe about 128 or 200GB?] in the 4th bay so I can then get a 3rd [boot/system] that will obviously run a bit faster than the other drives.
I'm just curious to know not only about the drives, but the phsycial installation of the drive. Do the drives that area available for purchase online, do they come with the drive alone? And do they fit in the hard drive carrier that is in the MacPro? Or is there an additional kit that is needed when puttin the drive in?
I'm mostly going to be running pro audio stuff like Logic, Ableton, Reason, Native instruments stuff, etc. as well as Autodesk Maya and other graphics and video stuff., so any suggestions would be nice.

Bootcamp will not install on my late 2012 mini Samsung EVO 840 1tb SSD

I recently replaced my 256gb OWC SSD in my late 2012 Mac Mini with a Samsung EVO 840 1tb.
I did the following
1) Using 10.9 recovery i initialized and created a single clean partition on the 1Tb SSD
2) I installed a clean copy of 10.9
3) Using migration assistant i transferred apps and documents from my previous SSD via a USB 3.0 adapter to the new SSD
4) Using Bootcamp Assistant 5 I created an ISO version of a clean copy of Windows 7 Home Premium and downloaded the Apple updated Boot Camp drivers to the same 16gb Sandisk Extreme USB 3.0 thumb drive
5) Using Bootcamp Assistant created a 199gb Bootcamp partition on the new Samsung SSD which appeared to go to completion
6) Mini restarted from the Bootcamp USB drive and Windows started successfully
7) I chose Windows 7 Home Premium install
8) I got the "which partition do you want to use to install Windows" screen, chose the Bootcamp partition, using the advanced option I chose format which appeared to complete, hit NEXT and then got an error that windows could not install because it could not find the NTFS partition, and then i was stuck.
When I rebooted I first got the Unable to find a bootable disk, hit any key error. I then physically shut down the computer, held down the alt key chose the Mac partition and the computer successfully booted. I could see the Bootcamp partition and according to Disk Utilities, the partition was formatted as NTFS.
The only connections to the Mini were a 30" Apple Cinema via a Apple Mini display connector, the keyboard and mouse via USB, and the USB Bootcamp Created 16gb Sandisk Extreme USB 3.0 thumb drive. I also have an internal Apple 1 tb hard drive with no applications installed. In the apps installed on the Samsung does include Parallels 9.
What have i done wrong or missed? IF nothing it appears that the Bootcamp assistant supplied with 10.9 may have an issue with my Hardware setup including the Samsung EVO840 1tb drive.

There are known SATA speed issues with Macs and EVO 1TB. Please check in System Profiler -> SATA for SATA status of the EVO. It seems to work on OSX side, but not Bootcamp/Windows.
Please check for any firmware updates for the EVO on the Samsung website.

Differences Between The Asus P67 EVO And Pro?

Anyone know of the differences between the Asus P67 EVO and the Pro?
I want to buy an Asus P67 Pro Motherboard today, but there are only 2 left at Fry's and they are both open-box returns and the other Fry's has only 6 left and ALL are open-box returns. So I'm thinking there may be an issue with the Pro's?
Is the EVO just as good?
On the Asus site specs, it seems the only differences are:
(and I'm not sure what any of the following means)
-On the Pro, the PCIe x16-3 slot shares bandwidth with the ESATA12
-On the EVO, the PCIe x16-3 slot shares bandwidth with the ESATA3G and the PESATA3G
-The EVO has dual LAN's
-The EVO has a CMOS Switch
-The Pro has the "System Panel" Q-Connector
Adobe seems to be heading towards allowing 2 video cards.
Would the EVO limit me if this happens?
I notice there's only one EVO on the PPBM5 site in the upper realms (Novak).
There seems to be more Pro's.
I don't plan on doing huge overclocking, maybe minor.
Components to be used:
-i7 2600K
-Corsair Vengeance 16GB
-Corsair AX 850 Watt Gold
-EVGA GTX 460 1GB Superclocked
-OCZ Agility 3 SSD 120GB
-Seagate Barracuda 3GB Storage
-Seagate Barracuda 1GB for Exports, Page File, Previews, Media Cache
-Seagate Barracuda 3GB Storage in Acomdata Samba External Enclosure for Backup
-WD My Book 3GB External for Another Backup
Any help would be appreciated.
Thanks Guys.

addiZ wrote:
I'm going to use my MacBook mainly for gaming and editing videos
Don't get the 13". It only has an integrated video card. Both the 15" and 17" models have an integrated as well as a dedicated video card.

Does FM2-A75IA-E53 fits in Streacom FC8 EVO?

I am about to purchase a FM2-A75IA-E53 mobo but first I need to know if it will fit in a Streacom FC8 EVO Chassis? As you can see, there are some pretty explicit measurements. Streacom provides some soc1155 models that fit but don't provide info on FM2 soc mini-itx mobo's.
Further on, I want to know if this model already ships with bios v2.0 because I want to buy a A10-6700 along with it.

If needed you can use an extension cable such as this one: http://www.newegg.com/Product/Product.aspx?Item=N82E16812200121
I managed to find a build using that case and MB. Read it and see what you think. Here's the link:
http://forum.xbmc.org/showthread.php?tid=146006

How do I search my history with an EVO 4G

I am using mozzilla FireFox and I can't seem to find my history, websites previously veiwed, seriously need help. I have an EVO 4G

Hi,
On your EVO, you can tap the Awesome bar to see a list of frequently viewed sites and you'll also see a History button you can tap to see your browsing History. This article has a screenshot:
http://support.mozilla.com/kb/getting-started-firefox-mobile#w_how-do-i-quickly-find-the-site-i-want

HDOne or EVO HD

Similar Messages

Maybe you are looking for