HDP Agent Device emulator and Bluetooth Stack for Win
Hi All,
We have successfully installed the Bluetooth Stack for Windows (Toshiba v7.10.01)
We would like to know the initial steps on how to test samples given in the Toshiba SDK with the HDP Agent Device emulator?
We are using the HdpAgent tool provided by Toshiba to simulate the HDP.
Successfully installed latest Bluetooth Stack for Windows by Toshiba Version v7.10.01
After this we followed below steps to run the HDP Agent Device emulator test application
1. Set the [Data Type] as Scale
2. Clicked the [Power]-[ON] button
3. Set the [Connect Target] to the BD Address of the connection target.
4. Set the MDL Configuration in [Connect]
Tried both options - Reliable and Streaming
5. Clicked on the[Connect]-[Auto Connect/IEEE] button to start
connection with target device.
After executing step 5, we are getting below error
Start Auto Connect
!!! ERROR Get HDP PSM()
Please help us to proceed further to emulate the HDP device.
Message was edited by: rajusb
Similar Messages
-
How do I connect a HP OfficeJet 100 Mobile Printer to my iPad 2? It works fine with other devices in my home, just my iPad says no AirPrint device found and Bluetooth is on on printer
Hi @kobgold319,
Welcome to the HP Forums!
I see that you are trying to connect your HP Officejet 100 Mobile Printer - L411a to your Iphone 5. I am happy to look into this for you!
Please take a look through this guide, HP Printer Does Not Support HP's Mobile Printing Solutions. As it will have the answers to your questions.
Hope this guide helps, and have a nice day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping! -
I need an airport and bluetooth card for my dual 2.3 GHz powerPC G5. However, not sure of which card can some one tell me which card or cards I need?
Hardware Overview:
Model Name: Power Mac G5
Model Identifier: PowerMac11,2
Processor Name: PowerPC G5 (1.1)
Processor Speed: 2.3 GHz
Number Of CPUs: 2
L2 Cache (per CPU): 1 MB
Memory: 4 GB
Bus Speed: 1.15 GHz
Boot ROM Version: 5.2.7f1
Serial Number (system): G854917PR6V
Hardware UUID: 00000000-0000-1000-8000-00145165812C
How do I know which if I have an early or older?
Apple 5714:
Name: bcom5714
Type: network
Driver Installed: Yes
Bus: PCI
Slot: GIGE
Vendor ID: 0x14e4
Device ID: 0x166a
Subsystem Vendor ID: 0x106b
Subsystem ID: 0x0085
Revision ID: 0x0003 -
Satellite A500-19x: No illumination and modem driver for Win 7 needed
My laptop died so I tried to re-install windows 7 and all the drivers for it.
I couldn't install the modem driver(?) and so cannot access the internet from it.
Also, the light up buttons above the keyboard no longer light up.
The taskbar is an ugly grey instead of being translucent.
I don't know much about computers and would appreciate any advice :)Hello
If you are not familiar with this computer stuff lets do it on easiest way as possible.
Here is installation order how all drives and Toshiba utilities must be installed:
Windows 7 64bit
Intel Chipset Utility
Intel Matrix Storage Manager
Display Driver
Sound Driver
TOSHIBA Supervisor Password Utility
TOSHIBA HW Setup Utility
TOSHIBA Flash Cards support utility
Wireless LAN Driver
Synaptics Touch Pad Driver
TOSHIBA Software Modem
Toshiba HDD Protection
Bluetooth Stack for Windows by Toshiba
LAN Driver
Jmicron Card Reader
TOSHIBA USB Sleep and Charge Utility
TOSHIBA Face Recognition
TOSHIBA eco Utility
TOSHIBA HDD/SSD Alert
HDMI Control Manager
TOSHIBA Remote Control Manager
TOSHIBA SD Utilities
TOSHIBA PC Health Monitor
TOSHIBA Fingerprint Utility
ConfigFree
TOSHIBA Web Camera Application
SD Memory Utilities
Value Added Package
All drivers and Toshiba tools and utilities you can find on Toshiba download page under http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp
And dont forget: your notebook is supported for 64bit version only so you must install WIN7 64bt. -
Ralink rt3290 bluetooth 01 for Win 8
Hello !
i have HP Pavilion 15-e068se Notebook PC Drivers and can't install this app ralink rt3290 bluetooth 01 for Win 8, and others on photo,
Can you help me please to solve this issue ?Hello AlexaLaw.
Welcome to the HP Forums. I understand the computer is not recognizing your Ralink Bluetooth software, and other unknown devices. I apologize for the delay, but I will assist you the best I can.
I will start by providing your computer's Ralink Bluetooth software for Windows 8: Ralink Bluetooth Software Driver for HP Pavilion 15-e068se Notebook PC
This is the correct driver for this computer. To install it properly, please follow these instructions:
1. Go into Device Manager. Right-click on the Ralink Bluetooth software under "Other Devices" and select "Uninstall". Please do not restart the computer.
2. Download and install the Ralink software I provided above. A restart might be required.
Once this is done, please ensure Device Manager is showing the correct Ralink software.
To address the remaining unknown devices, I will provide a Microsoft document. Following the Microsoft document will allow you to identify these devices and resolve their issues: How to troubleshoot unknown devices that are listed in Device Manager
Please note: This document is intended for Windows XP. However, the steps to resolve the issue bear the same value on many versions of Windows, including Windows 8.
I believe your issues will be resolved by trying the suggestions above. Either way, please post your results. Thank you for choosing the HP Forums. Have a great day!
Mario
I worked on behalf of HP. -
so i did a fresh instal of windows xp pro sp3.
device manager shows yellow question mark and ! for Network Controller and BCM2046 Bluetooth Device. i have tried using lan to windows update, update drivers, but device manager cannot find anything.
i have installed the 2 broadcom drivers for windows xp listed on lenovos website. i made sure that wireless switch is on, and fn+f5 wireless option is set to on as well.
LAN shows up. and so does the 1394 on the network connections, but no wireless.
(note: on my server 2008 os, the new windows troubleshooting instructed me to turn on a specific service, which then enabled my wireless to work.)
however i cant seem to find a way to get the wireless to work.
Could someone tell me all services exactly need to be enabled for the wireless to work? and why does the network controller still show up on device manager even after i have installed the drivers?
please help, totally lost.Your "yellow" device is Bluetooth, not WiFi.
Fn+F5 utility work depends on both of them, so you need all drivers to be installed before it will work.
Install bluetooth drivers for your model. Also, your WiFI also may be Broadcom (Gemtek) and you may be trying to install Intel WiFi.
//help will save the world -
How to install Bluetooth Stack for L850-1EZ?
Hi,
I have Satellite L850 - 1EZ with short model number: PSKDNE and I can't install the driver for bluetooth device. I downloaded it from the site, but in the process on installation it says "Please plug in the Bluetooth device and click OK button".
My bluetooth device was working properly before I sent my notebook to technical service because of motherboard failure which ended up replacement of the motherboard. And before that -unfortunately- someone tried to reinstall the operating system and all the drivers were gone.
After I recieved my notebook from the technical service all my drivers were back except Bluetooth driver. Now I'm trying to install it but keep getting error messages. My operating system was originally Windows 8 - 64bit . Now it is updated to Windows 8.1 .
Can anyone help with this issue ?
Thanks in advance.
Have a nice day.
Best regards> {quote:title=Tonny wrote:}{quote}
> After Win 8.1 system upgrade, you will need to upgrade the Toshiba drivers too.
> As Im not mistaken, the Satellite L850-1EZ supports the Atheros WLan / BT combo module.
>
> To get the Bluetooth working, you need to install the Toshiba System Driver for Win 8.1 and additionally the Atheros BT filter driver package must be installed.
>
> Firstly install the Toshiba System Driver tool which is available on the Toshiba EU driver page.
> http://support1.toshiba-tro.de/tedd-files2/0/tsd-20131016171635.zip
>
> Then follow with the Atheros BT filter driver package installation.
> Its the same package for Win 8 and Win 8.1
> http://support1.toshiba-tro.de/tedd-files2/0/bfdp-20121128162925.zip
Thank you very much for the reply.
No error messages during the installation process but nothing happened after the installation. Still no sign of Bluetooth on the right down corner. -
L655-S5097 64Bit WIN7 and bluetooth stack
I recently set up this PC for my wife and remember seeing a note on the desktop about deleting the bluetooth stack and re-installing it. But I lost that note and am now stuck trying to figure out why the bluetooth doesn't work. In fact the toshiba driver hangs during installation and doesn't even complete. I don't want to completely reload DVDs to the toshiba factory condition since I have already added so many things beyond "base load".
My PCI-mini WIFI card is the Azurewave AW-NB047H not the one that comes in the factory build. The Azurewave site is useless since it doesn't have drivers for this card and the drivers I found on Softpedia (for this exact card model #) didn't work either. Any ideas?
Thanks,
Mike
Solved!
Go to Solution.SOLVED -- Just had to locate and run the correct file from the CD that came with my Azurewave card.
Thanks,
Mike -
Connectivity between ABAP and Java Stacks for BI
Dear all,
our BI developer have to use BW Analyser for showing and changing of BW reports in Java based NetWeaver Portal.
Initially just ABAP stack (SID DCE) was installed. In Februar 2014 I installed also an Java Stack (SID JCE) and got dokumentation for
connection to ABAP Stack from SAP Support, it is attached. Further help from SAP Support is not possible, they mean that this
case belong to consultion issues.
Follow activities were sucessfully done:
1. RFC connection DMSAPERP4DEV_PORTAL_JCE was created in J2EE engine
2. RFC connection DMSAPERP4DEV_PORTAL_JCE was created for Portal
3. Portal Server Settings were maintained for portal
4. Singe Sign-In in BI was maintained
5. BI Certificate was imported from BI
6. Portal Certificae was exported from Portal
7. Portal Certificate was imported into BI.
By processing of attached SAP guide it was a problem at step 7 "Create BI System in the Portal"with the
creatig of BW system name. Under "System Administration -> System Configuration -> System Landscape"
I found no systems which are maintained with the Portal Content Studio. I take a template "SAP_R3_Dedicated"
but can not change the system name to "SAP_BW", it is still "Dedicated Application Server for R/3 System". All other
properties was set fine.
At step 8 of mentioned guide I face the next problem - there is no system names under "SAP Reference System"
under "Administration -> System Configuration -> Configuration for User Management", because the system
name on the step 7 could be not set correct, so I can not choose any.
Please advice how to proceed here.
Thank you and best regards
Stan Oberberger
Technical ConsultantHi,
It clearly says the problem is with virtual memory. SO you need to change your virtual memory settings using configtool.
See the relevant note.940893
Make changes in the VM parameters for Bootstarp, Dispatched and the server nodes. Your -Xms should be less than equal to -Xmx.
Restart the cluster then.
It should work.
Do reward good points. -
Cant find network controller and Bluetooth drivers for my HP 15-S006TU Windows 7 OS Laptop
I recently bought HP 15-S006TU through flipkart and installed Windows 7 OS, I tried downloading all drivers from hp website but I didnt find network controller and bluetooth drivers, I am missing these very badly without this i cant connect to internet, request to help me in this regard and suggest a link where i can download these.
Hi:
There are no drivers for Vista for the wireless/bluetooth adapters in your model.
Maybe this wireless driver might work but it is pretty old...
http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_111718_1&sp4ts.oid=5229461
I can't find a bluetooth driver that lists vista as supported.
You can try this older one for Windows 7 but I doubt it will work.
http://h20565.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5229463&swItemId=ob_113004_1&swEnvOid=405... -
Communicate link between Java and ABAP Stack for https
I have configured https in both the java and abap stacks (we have a double stack configuration). Due to our future configuration I have changed the hostnames to fully qualified hostnames per SAP instructions.
The question I have is does anyone know what RFC destinations or JCo settings I need to change to make https complete?
I have the problem where when I fire off the Integration Builder from within the ABAP stack (SXMB_IFR) I get a straight hostname (no domain name). Where is this configured? Any help is appreciated..Check the exchange profile (Administratio tab in /rep/start/index.jsp page; you will have to enter it manually since it is throwing error from SXMB_IFR).
Regards,
Henrique. -
my Company was mistakenly sent CS6 for Windows. May I download CS6 for Mac and use serial # for windows?
Unless things have changed, there are separate S/N's for the PC and the Mac versions.
I would immediately contact Adobe Customer Support (not Technical Support), and explain the error. I feel that they will be able to help you with replacing the PC version.
Good luck,
Hunt -
Portege R835-P56X : are there no Wifi and soundcard drivers for WIn XP ?
I have just got a Portege R835-P56X . Are there any Wifi and Soundcard drivers for Windows XP for this laptop ? I want to downgrade to win XP as I have a huge collection of legacy software which have compatibility issues with WIndows 7. I can't find the required drivers on the Toshiba website, all though there are drivers for webcam or touchpad. I don't understand the reason for having a few drivers for XP but not all the required ones. Surely one can't use a laptop without Wifi or audio.
Portege R835-P56X
Best to upgrade Home Premium to Professional and then install XP Mode. Works really well here.
Upgrade to another edition of Windows 7 by using Windows Anytime Upgrade
Install and use Windows XP Mode in Windows 7
It's not necessary to have hardware vitualization enabled. See KB977206.
-Jerry -
HP Pavilion p7-1451 USB 3.0 and Bluetooth drivers for Windows Server 2008 R2
I bought an HP Pavilion p7-1451 so I could have an affordable, yet reasonably powerful machine to put a server software development environment on (I'm a software engineer).
It came with Windows 8, but I needed Windows Server 2008 R2, which I own through an MSDN subscription. I did what I always do in these cases, re-partioned the hard drive, re-formatted, and installed the new operating system.
I have nearly all devices working properly, but it still won't recognize the USB 3.0 ports and the Bluetooth device. I searched everywhere but cannot find anything that will work. Anything from the HP site is targeted for either Windows 7 or 8, and when trying either one of those, it tells me "Your system does not meet the operating system requirements" and MSI does not publish any drivers at all for this particular motherboard (that I can find anyway).
Motherboard: MSI MS-7778 also known as: MSI 2AEO version 1.0
BIOS: AMI 8.12
This is the list of "Other devices" in Device Manager that Windows doesn't recognize:
BCM20702A0
Universal Serial Bus (USB) Controller
Universal Serial Bus (USB) Controller
Bluetooth Device ID: USB\VID_0A5C&PID_21F1&REV_0012
USB Controller device ID: PCI\VEN_1022&DEV_7812&SUBSYS_2AE0103C&REV_03
Windows still doesn't recognize them after allowing it to search the internet.
And I've googled all over the place and I'm not getting anywhere.
Does anyone have any advice?
Any chance this could be related to the BIOS?
I'm not having any luck finding a BIOS download for this motherboard either.
Any help is much appreciated!
This question was solved.
View Solution.Holy crap, it worked!!
My version number was slightly different in the .inf files, but I dropped the last ".1" off the end and that did the trick!
So, the steps were:
Get and extract the driver files:
1. Download the AMD Chipset Drivers file from here:
http://support.amd.com/us/gpudownload/windows/Pages/raid_windows.aspx#2
(choose the first download in the list. It's called "AMD Chipset Drivers")
2. Download and install 7-Zip from here:
http://7-zip.org/download.html
3. Right click the 13-4_vista_win7_win8_32-64_sb.exe chipset file, select "7-Zip", then choose "Extract Here"
Install the USB Host Controller driver:
1. Open the USB Controller .inf file in Notepad from the following location:
13-4_vista_win7_win8_32-64_sb\Packages\Drivers\SBDrv\hseries\USB30\amdxhc\W764A\amdxhc.inf
2. Find all instances of: .5.1.1 and replace with: .5.1
and save and close the file.
3. In Device Manager, right click the first unknown "Universal Serial Bus (USB) Controller" and choose "Update Driver Software..."
4. Choose "Browse my computer for driver software", navigate to the directory in Step 1, and click Next.
5. Accept any warnings and choose to Install anyway...
It should recognize and install the USB Controller driver (finally progress!)
Repeat the same steps above for any other USB 3.0 controllers that are unrecognized.
The devices should now say "Unknown device" instead of "Universal Serial Bus (USB) Controller".
Windows recognizes your controllers now, but not the USB root hubs.
For each of those "Unknown device" entries, do this to install the USB 3.0 Root Hub:
1. Open the USB Hub .inf file in Notepad from the following location: (notice that it's a different directory)
13-4_vista_win7_win8_32-64_sb\Packages\Drivers\SBDrv\hseries\USB30\amdhub\W764A\amdhub30.inf
2. Find all instances of: .5.1.1 and replace with: .5.1
and save and close the file.
3. In Device Manager, right click the first "Unknown device" and choose "Update Driver Software..."
4. Choose "Browse my computer for driver software", navigate to the directory in Step 1, and click Next.
5. Accept any warnings and choose to Install anyway...
I plugged in a USB 3.0 hard drive, and at first it didn't seem to work. I tried another port and still nothin. But after about 40 seconds the drive was recognized and all is well. Yay!
Thank you Paul for your help!
Hopefully this post will help others too.
USB 3.0 on a fresh install of Windows Server 2008 R2.
That was easy. :-P -
Seperate ABAP and JAVA stack for BI
Hi,
We already have running a ABAP stack with BI 7.0 on Oracle/AIX
We are now going to install the JAVA stack with the following software units (AS JAVA, EP, EPC, BI JAVA) to a seperate AIX server. I do have the following questions:
1.) The installation of the JAVA stack will also create a new database or is it possible to use/connect to the database of the ABAP stack
2.) How are we going to connect the ABAP server to the JAVA server. Will that be with JCO or RfC or something else.
3.) Installing the JAVA on a seperate server, how the handle the user store. Creating its own or can we use the user store of the ABAP such as in a dual stack installation ?
4.) Other issue's what is worth to mention
please advise
RitchieHi Ritchie,
You can have different installation options.Amswers below
1)As you are installing in a different system It will create a sepatate database and the connection will happen through jco/rfc.
2) jco/rfc will be used for connection
3)User store will be selected according to the installation mode mentioned in the installation guide.
Regards
Ashok
Maybe you are looking for
-
Hi! My case is very simple, and it is so simple that i didn't find any question equal to mine. How I do the backspace?
-
Hi Guys, I have a flat file which I need to send to a three webservices(3rd party system) using BPM ,using BPM as they have to be invoked in sequence.The whole scenario is Asynchronous but the webservices are synchronous as they have a request and re
-
Hello, I have an issue in regards to ABAP Queries that are accessed via SQ00. The issue was that a lot of the reports (based on a sample) do not have any authorization check. There is over a 1000 queries, is there any way for me to check the co
-
How to install only Garageband from OS 10.6 install discs?
Hi. I recently got a new Mac with OS 10.6.2. It came with the iLife Apps installed.For reasons I won't get into ......I had to try to install the older iMovie 08 (which I believe had some sound files connected to Garageband).After attempting that ins
-
Delivery split and billing document split
hi all can any body tell that what are the criterias that a delivery document is splitted, and the billing document thanks and regards gopal krsihna