HDR-CX405 How to stop dual recording, only mp4 file needed.

Hello Sony, Yesterday i purchased HDR-CX405. My question is, how to stop dual recording? Only mp4 file needed. Both file created on memory card while shooing video scene - AVCHD and mp4. I don't want AVCHD (too big file), just want mp4 file only.

Hi mkpi49,
Welcome to the Sony Community!
I would just like to confirm the answer VideoGeek posted. The camera can only record in Mp4 when it's set to Dual Rec. Both an AVCHD and Mp4 file will be created and written on your card. We would also suggest recording in AVCHD and later converting the file to Mp4 using the PlayMemories Home software.
For further assistance regarding your concern, please contact the Sony offices/Sony representative offices nearest to your place of residence in Asia Pacific region http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to proximity, they are in a better position to respond to your questions or concerns.
If my post answers your question, please mark it as "Accept as Solution". Thanks_Mitch

Similar Messages

How we can restrict record in CTL file on the basis of other table ?

Hello all,
How we can restrict record in CTL file on the basis of other table ?
Eg.
I have following control file to load the records in the table through the sql loader.
LOAD DATA
INTO TABLE THIST APPEND
FIELDS TERMINATED BY "|" TRAILING NULLCOLS
LNUM POSITION(1) Char "substr(:LOAN_NUM, 4, 13)",
TSRNUM Char "rtrim:TRAN_SR_NUM)" ,
TPROCDT Char "to_char(to_date rtrim:TRAN_PROC_DT), 'MMDDYYYY'), 'YYYYMMDD')"
I have another table c all TFILE in which I have LNUM. I want to import only those records from input text file using the control file and sql loader in which LNUM is exist in the TFILE.
So how i can restrict it in the Control File.
Thanks
Kamlesh Gujarathi
[email protected]

Hello Satyaki De.
Thank you very much for your suggestion but my Private information is totally apart from this question & I already I have changed each and every information from the question.
Thanks
Kamlesh Gujarathi
[email protected]

HT204382 How can I to see a mp4 file with ec-3 audio códec with QuickTime?

I converted to mp4 file a TV program recorded with EyeTV, with H264 and ec-3 codecs, but I can't hear any audio with QuickTime.
How can I to hear this mp4 file?.

Thanks, but today I tried it and now perian don´t support the codec ec-3 by Dolby (Dolby Digital Plus (DD+ or E-AC-3 (Enhanced AC-3), and sometimes incorrectly as EC-3))

I download a file in the torrent site which is MP4 but unfortunately i tried to delete it but i can not. but all the files that i have is easily to delete only MP4 files i can't delete in the download foldeer please try to help dont know what to do please

i download a file in the torrent site which is MP4 but unfortunately i tried to delete it but i can not. but all the files that i have is easily to delete only MP4 files i can't delete in the download foldeer please try to help dont know what to do please

Well you can sync your iPod/iPhone to yur computer or laptop then take the photos off of your iPod like taking photos of of a SD card (from a normal camera) or off of a USB..! Good Luck. plz tick this saying This solved my question if it helps you.

How can i open a downloaded mp4 file that is zipped? Witch will not open. And, Convert that mp4 to play on my iMac with Maverick osx ? I there an app or apps i need to buy ?

how can i open a downloaded mp4 file that is zipped? Witch will not open. And, Convert that mp4 to play on my iMac with Maverick osx ? I there an app or apps i need to buy ?

You should be able to open the zipped file by double clicking on it.
http://www.videolan.org/vlc/index.html
This link is for a VLC Player it can play just about everything.
Cheers
Don

How to stop new record creation when mouse click

Hi,
I am working with Oracle Forms 6i.
I have a multi record block. I have provided a 'New' button that the user should click when a new record creation is required. This is because there is some other function that needs to be performed when the new record is created. Specifically, on clicking the new button, the program populates the field with values read from another table. This works fine.
However, I realized, that if the user clicks on the mutli-record block just below the last record, a new record gets created. This action does not cause the logic behind the 'New' button to execute and the record is created in a manner that is not acceptable.
First question is why does the new record get created only by clicking with the mouse with the pointer below the last record? Is there a way to stop this from happening?
Thanks in advance for your help.
Shailesh

Hi Andreas,
Probably I was not able to explaing my problem.
I have a button that creates a new record when clicked. The button's trigger has the CREATE_RECORD statement.
When a new record is created, I need to copy values from the record above it. I have therefore used DUPLICATE_RECORD in my block's WHEN-NEW-RECORD-INSTANCE trigger.
I cannot use DUPLICATE-RECORD in WHEN-CREATE-RECORD trigger.
So, I am not clear about what you are suggesting.
My problem is that a new record gets created when click with my mouse pointer below the last record in the multi-record block. Why does that happen and how to prevent it?
Thanks
Shailesh

How to stop and start only the process of Oracle Application Express?

I'd like to know how to stop the process of Oracle Application Express on my server installed oracle express package.
After installed Oracle Express edition, not only oracle database server processes but also Oracle Application Express, such as http server, is started automatically...
I hope to stop and start Application Express on demand but is this feature enabled?

Oracle Apex is an API, if that helps you understand / visualize. You do not start Apex process nor stop it.
When an Apex session starts it starts calling the API.
You can however start / stop the listener. It may be OHS, ApexListener and the J2EE container running it, OC4J or any other "server" that you are using.
The built-in EPG is something like an API again, you cannot start / stop it but you can disable/enable it with DBMS_XDB.SETHTTPPORT API.
Regards,

How to insert 20 records only in one table

hi to all,
i want insert 20 records only in a table,but suppose i want to enter 21th record it will not inserted .
suppose delete one record then insert, it will insert.
but always count(*) is not greater than 20.
is there any solution for that,
pls help me

Yes there is a solution for that using a materialied view:
SQL> select * from v$version;
BANNER
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
SQL> drop table t purge;
Table dropped.
SQL> drop materialized view t_mv;
Materialized view dropped.
SQL> create table t (
2 x integer,
3 y varchar2(30)
4 );
Table created.
SQL> CREATE MATERIALIZED VIEW LOG on t
2 WITH ROWID (x, y)
3 including new values;
Materialized view log created.
SQL> CREATE MATERIALIZED VIEW t_mv
2 REFRESH FAST ON COMMIT AS
3 SELECT count(*) cnt
4 FROM t;
Materialized view created.
SQL> alter table t_mv ADD CONSTRAINT chk check(cnt<=20);
Table altered.
SQL> insert into t select object_id, object_name from all_objects where rownum <
21;
20 rows created.
SQL> commit;
Commit complete.
SQL> insert into t values(21,'KO');
1 row created.
SQL> commit;
commit
ERROR at line 1:
ORA-12008: error in materialized view refresh path
ORA-02290: check constraint (TEST.CHK) violated
SQL>
SQL> select count(*) from t;
COUNT(*)
20
SQL>Not sure that trigger based solution works due to multi versioning read consistency.

How to delete the record in the file present in the application server?

Hi,
I have two questions.
i) How can I delete a record based on some condition in the recordx in the file that is present in the application server?
ii) How can I lock the users whiel one user is accessing the file on the application server?
Thanks in advance.
Suvan

Hi,
If u want a frequent deletion this approach to delete a record from a file will havee unnecesary copy of records from one file to another and deletion of one file and renaming activities.
Instead what u can do is Add and field del_flag to ur record structure.
If u want to delete the record from a file just mark this del_flag as 'X'.
While processing u can have a loop like
loop at it_XXX where del_flag <> 'X'.
endloop.
This will logically delete the record.
When u r to finish the application at that time only perform this copying / deleting / and renaing activity
Hope this helps.
Cheers,
Nitin

Unnable to capture anything. It records only blank files

When i open the capture window, i can watch the tape and control the camera. When i press "record" it starts recording, but the remaining disk space -meter does not decrease, but the minutes recorded -meter is counting. When i stop the recording process, nothing happens. If i browse the harddrive, i find the video files, but they only use 140-150kb, and is of corse useless. I tried to record using another program (DVapp) and this works.
. I also often get a pink bar on either the left or right side of the preveiw.
The camera has worked before on Premiere 6.5 on Windows 2000 and XP
I added the FireWire-card after i installed Premiere, but i re-installed premiere afterwards.
This is my new computer with the issues:
Windows Vista Ultimate 64bit
2x Samsung SpinPoint 250GB 7200 SATA
1x Western Digital 750GB 7200 SATA (This holds the "recordings")
Intel Core2Quad Q6600 4 x 2.4GHz x64
6GB RAM DualChanel
Nvidia GeForce 9800GT
The Windows Experience Index is 5.7
The Camera is a Panasonic NV-DS5

I think that you answered this, but to clarify, with the newly added IEEE-1394 card, DVapp does Capture fine. Is that correct, or did you add the card after you tried the other Capture application?
There was a recent thread, where all of the Captured files were listed as 0KB. Do not recall if it was in this sub-forum, or not. If I can find that, I'll get you a link. Do not recall if there was resolution, or not. Might be similar enough to provide some help, or maybe moot.
Good luck,
Hunt
[Edit] No Matrox, or BlackMagic, etc. cards, right?

How to skip a record in flat file to idoc scenario?

Hi,
Anybody have good suggestions on how to skip a record(xi not process the record) based on certain conditions? I don't want to use bpm, anybody has experience with file to idoc can advise how to deal with this situation?
Thanks,
Meg

Meg,
Its very clear. It can be easily done. I hope u might be knowing about Michal's changing the IDOC occurence blog. Based on that blog change the IDOC occurence to 0...Unbounded.
Now map all the necessary fields to the target IDOC. On the IDOC root node set condition from source if the source field is not Delete then create IDOC else don't create.
Source --- If without else[Check condition if the source is delete] -
IDOC(root node).
/people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change
Hope its clear, if not kindly revert back.
Best regards,
raj.

How to update the record in a File (without closing Writer)?

Well i've got one issue:
I want my program to record in a file updating any time i.e the records are added in append.
But i want the record must be done in a file even if the Writer is not closed because I'd like to see the all logs of user and the main thing is sometimes there could be issue of software crash, powercut off or any So for that reason i 've made code like this but it doesn't update but it only override:
public boolean write(String s){
        boolean isFinished = false;
        try{
            FileOutputStream out = new FileOutputStream("C:\\new.txt");
            int i = 0;
            while(i != s.length()){
                out.write(s.charAt(i));
                i++;
            //here i've not closed file output stream
            isFinished = true;
        catch(IOException i){
            i.printStackTrace();
            isFinished = false;
        return isFinished;
    }

Well, Thanks for the help but,. i didn't understand
try not opening the file every time. As I only know that I need to open a file if i would like to update the records..
The update is not happening :
Firstly it shows like this (new.txt):
STOPSecondly it must show like this (new.txt) BUT NOT HAPPENING AS I EXPECTED:
STOPSTOPBut it's not hapenning

How to capture errors records in flat file in BDC

hi ,
    i would like to know how to capture error records while uploading a flat file to screen through BDC .
appreciatable solutions are rewarded.
thanks,
shan

Hi shan,
write this code, it will solve your problem.
DATA : BDCTAB LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
DATA : I_MSG LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA : BEGIN OF I_ERR OCCURS 0,
          MATNR(18),
          FLAG(1),
          MSG(100),
       END OF I_ERR.
DATA :V_LINES TYPE I.
LOOP AT ITAB.
REFRESH BDCTAB.
PERFORM SCREEN USING: 'SAPLMGMM' '0060'.
PERFORM FIELD USING: 'RMMG1-MATNR' ITAB-MATNR,
                      'RMMG1-MBRSH' ITAB-MBRSH ,
                      'RMMG1-MTART' ITAB-MTART,
                      'BDC_OKCODE' '/00'.
PERFORM SCREEN USING: 'SAPLMGMM' '0070'.
PERFORM FIELD USING: 'MSICHTAUSW-KZSEL(01)' 'X' ,
                     'MSICHTAUSW-KZSEL(02)' 'X' ,
                     'MSICHTAUSW-KZSEL(09)' 'X' ,
                     'BDC_OKCODE' '=ENTR'.
PERFORM SCREEN USING: 'SAPLMGMM' '0080'.
PERFORM FIELD USING: 'RMMG1-WERKS' ITAB-WERKS,
                     'BDC_OKCODE' '=ENTR'.
PERFORM SCREEN USING: 'SAPLMGMM' '4004'.
PERFORM FIELD USING: 'MAKT-MAKTX' ITAB-MAKTX,
                      'MARA-MEINS' 'EA' ,
                      'MARA-MATKL' '001',
                      'BDC_OKCODE' '/00'.
PERFORM SCREEN USING: 'SAPLMGMM' '4004'.
PERFORM FIELD USING: 'BDC_OKCODE' '/00'.
PERFORM SCREEN USING: 'SAPLMGMM' '4000'.
PERFORM FIELD USING: 'MAKT-MAKTX' ITAB-MAKTX,
                      'MARA-MEINS' 'EA',
                      'MARC-EKGRP' '001',
                      'MARA-MATKL' '001',
                      'BDC_OKCODE' '=BU'.
CALL TRANSACTION 'MM01' USING BDCTAB
                        MODE 'A'
                        MESSAGES INTO I_MSG.
FINDING LAST MESSAGE IN THE I_MSG TABLE*****
DESCRIBE TABLE I_MSG LINES V_LINES.
ACCORDING TO THE V_LINES NUMBER TABLE WILL BE READ****
READ TABLE I_MSG INDEX V_LINES.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
   ID              = I_MSG-MSGID
   LANG            = '-D'
   NO              = I_MSG-MSGNR
   V1              = I_MSG-MSGV1
   V2              = I_MSG-MSGV2
   V3              = I_MSG-MSGV3
   V4              = I_MSG-MSGV4
IMPORTING
   MSG             = I_ERR-MSG
EXCEPTIONS
   NOT_FOUND       = 1
   OTHERS          = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF I_MSG-MSGID EQ 'M3' AND I_MSG-MSGNR EQ '800'.
I_ERR-FLAG = 'S'.
ELSE.
I_ERR-FLAG = 'E'.
ENDIF.
I_ERR-MATNR = ITAB-MATNR.
APPEND I_ERR.
CLEAR I_ERR.
ENDLOOP.
WRITE:/ 'SUCCESS RECORDS' COLOR COL_POSITIVE.
SKIP.
WRITE:/ 'MATERIAL' COLOR COL_HEADING, 20 'MESSAGE' COLOR COL_HEADING.
LOOP AT I_ERR WHERE FLAG EQ 'S'.
WRITE:/ I_ERR-MATNR, 20 I_ERR-MSG.
ENDLOOP.
SKIP 2.
WRITE:/ 'ERROR RECORDS' COLOR COL_NEGATIVE.
SKIP.
WRITE:/ 'MATERIAL' COLOR COL_HEADING, 20 'MESSAGE' COLOR COL_HEADING.
LOOP AT I_ERR WHERE FLAG EQ 'E'.
WRITE:/ I_ERR-MATNR, 20 I_ERR-MSG.
ENDLOOP.
*&      Form SCREEN
     SCREEN
form SCREEN using P_PROG P_SCREEN.
BDCTAB-PROGRAM = P_PROG.
BDCTAB-DYNPRO = P_SCREEN.
BDCTAB-DYNBEGIN = 'X'.
APPEND BDCTAB.
CLEAR BDCTAB.
endform.                    " SCREEN
*&      Form FIELD
   FIELD
form FIELD using FNAME FVAL .
BDCTAB-FNAM = FNAME.
BDCTAB-FVAL = FVAL.
APPEND BDCTAB.
CLEAR BDCTAB.
endform.                    " FIELD
Thanks,
Murali

How can I export a compressed mp4 file from iMovie (mavericks)?

Hello everyone,
I had just downloaded the new version of iMovie.
I'm very amazed to see that the funcion "Export movie with QuickTime" is not available.
I used this funcion to customize parameters of exported videos;
How can now customize parameters? I have to use another external software to produce mp4 files???
Thankyou for answers.
Gianmarco

If you use "Share" and choose 540P, 720P or 1080P it will be mp4, withH264 codec. You just have to once figure out what spefic settings (for example bitrates) are used with the defaults from iMovie 13 (look-up the exported files with info in Quicktime), and wether they are ok with you.
In the former version I already used automator to achieve some specfic settings for my web-video's, now I think I don't need that anymore.
The only way around as far as I know is the usage of QTPro7 or compressor. Export as 1080P and open the file with one of those apps.
HtH
Ben

How to create Inbound Idoc from XML file-Need help urgently

Hi,
can any one tell how to create inbound Idoc from XML file.
we have xml file in application server Ex. /usr/INT/SMS/PAYTEXT.xml' we want to generate inbound idoc from this file.we are successfully able to generate outbound XML file from outbound Idoc by using the XML port. But not able to generate idoc from XML file by using we19 or we16.
Please let me know the process to trigger inbound Idoc with out using XI and any other components.
Thanks in advance
Dora Reddy

Hi .. Did either of you get a result on this?
My question is the same really .. I am testing with WE19 and it seems SAP cannot accept an XML inbound file as standard.
I see lots of mention of using a Function Module.
Am I correct in saying therefore that ABAP development is required to create a program to run the FM and process the idoc?
Or is there something tht can be done with Standard SAP?
Thanks
Lee

HDR-CX405 How to stop dual recording, only mp4 file needed.

Similar Messages

Maybe you are looking for