HDR is not working after a new installation of Photoshop

After a system crash of my computer I had to reinstall all programms. In the past I made a lot of HDR pictures, I will say I know what i have to do. But after the new installation of PS when I merge some photos with HDR pro the result is much more darker then the darkest of the braketing photos, and there is no way in the ACR (adobe camera raw) to get an acceptable result. I will show you screen prints:
Do you have a solution for this?
Many thanks...

Chmeva wrote:
It also makes "a lot of noise" ("a lot" in the sense that if I put it next to my ear I can hear a lot of clicking sounds from inside) while attempting to transfer songs/sync,
This normally, is a sign that your iPod Hardisk is dying. Do the iPod Disk Diagnostic as posted by tt2. it wont fix your problem, but it will help in troubleshooting.
Have a nice day!

Similar Messages

HT4623 my phone main button not working after installed new version software 7.0.6

my phone main button not working after installed new version software 7.0.6

Arrange some liquid like petrol spirit and w 40
two drops in to home button.
30 times press slowly slowly and then restart your apply iphone.
You will get ready.
I am sure. Thanking you...

Wifi connection with 4s not working after installing new software ios6

wifi connection with 4s not working after installing ios 6.

Go to Settings > WiFi > Select your network and hit the right arrow to "Forget Network"
Then go to Settings > General > Reset Network Settings and try connecting again when the phone restarts.

Iphoto not working after updating new iPhoto

Can anyone help. I just updated my iphoto and now its not working. here is the mess. This is after I had a problem with the new iphoto.
Thanks
Process:         iPhoto [1898]
Path:            /Applications/iPhoto.app/Contents/MacOS/iPhoto
Identifier:      com.apple.iPhoto
Version:         9.2.1 (9.2.1)
Build Info:      iPhotoProject-628000000000000~3
Code Type:       X86 (Native)
Parent Process: launchd [120]
Date/Time:       2011-11-04 22:24:56.569 -0400
OS Version:      Mac OS X 10.7.2 (11C74)
Report Version: 9
Interval Since Last Report:          503556 sec
Crashes Since Last Report:           30
Per-App Crashes Since Last Report:   30
Anonymous UUID:                      DB20AA9A-F8FC-4BAD-A47D-C0F0EFA89391
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: /Library/Frameworks/iLifeFaceRecognition.framework/Versions/A/iLifeFaceRecognit ion
Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Reason: image not found
Binary Images:
    0x1000 -   0xd1afeb com.apple.iPhoto (9.2.1 - 9.2.1) <68601E93-E4CF-3B4C-AFFD-4781A92DD58B> /Applications/iPhoto.app/Contents/MacOS/iPhoto
0xe83000 -   0xf63fe7 org.python.python (2.6.7 - 2.6.7) <61DBA92A-C39A-3A52-86F2-59CF9D310CB4> /System/Library/Frameworks/Python.framework/Versions/2.6/Python
0xfae000 - 0x114effb com.apple.geode (1.5 - 151.51) <28D29759-F356-3608-B9CF-3031F3299B1B> /Applications/iPhoto.app/Contents/Frameworks/Geode.framework/Versions/A/Geode
0x11ee000 - 0x11f0fff com.apple.iLifePhotoStreamConfiguration (2.2 - 2.2) <4FA61CE9-1718-3E07-9896-0023A2A49699> /Applications/iPhoto.app/Contents/Frameworks/iLifePhotoStreamConfiguration.fram ework/Versions/A/iLifePhotoStreamConfiguration
0x11f6000 - 0x1205fff com.apple.iLifeAssetManagement (2.0 - 2.33) <8346DE35-5F86-3338-9913-B035B3EE5435> /Applications/iPhoto.app/Contents/Frameworks/iLifeAssetManagement.framework/Ver sions/A/iLifeAssetManagement
0x1212000 - 0x123affb com.apple.iPhoto.Tessera (1.1 - 60.10) <7BA9184E-0A00-3083-8322-772ECBDD30C9> /Applications/iPhoto.app/Contents/Frameworks/Tessera.framework/Versions/A/Tesse ra
0x124b000 - 0x1272ffb com.apple.iPhoto.Tellus (1.3 - 60.10) <4AABB0BC-AC97-3EE4-BF0F-D8499DDB57C0> /Applications/iPhoto.app/Contents/Frameworks/Tellus.framework/Versions/A/Tellus
0x1287000 - 0x1291fff com.apple.iphoto.AccountConfigurationPlugin (1.2 - 1.2) <3B68F126-D783-3F86-AF04-A0F6A459BE67> /Applications/iPhoto.app/Contents/Frameworks/AccountConfigurationPlugin.framewo rk/Versions/A/AccountConfigurationPlugin
0x8fe6e000 - 0x8fea09c7 dyld (195.5 - ???) <BCC83F99-7244-3DBA-867D-6226D53DD9F2> /usr/lib/dyld
Model: iMac7,1, BootROM IM71.007A.B03, 2 processors, Intel Core 2 Duo, 2 GHz, 2 GB, SMC 1.20f4
Graphics: ATI Radeon HD 2400 XT, ATI,RadeonHD2400, PCIe, 128 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz, 0xAD00000000000000, 0x48594D503531325336344350382D59352020
Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 667 MHz, 0xAD00000000000000, 0x48594D503531325336344350382D59352020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.131.36.11)
Bluetooth: Version 4.0.1f4, 2 service, 18 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HDT725025VLA380, 250.06 GB
Parallel ATA Device: MATSHITADVD-R   UJ-875
USB Device: Photosmart C4200 series, 0x03f0 (Hewlett Packard), 0x5c11, 0xfa200000 / 2
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd400000 / 3
USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0xfd100000 / 2
USB Device: Apple Keyboard, apple_vendor_id, 0x0220, 0xfd120000 / 4
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8206, 0x1a100000 / 2

iPhoto is missing part of the substructure it needs to run. You need to reinstall.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store you can find it in your Purchases List.

Flash Player not working after downloading new version

I downloaded Flash Player 10 and it does not work.I am using Windows XP and Internet Explorer. I have tried the trouble shooting. I have made sure its enabled under Active X and it does not work at all now. I have tried to download Flash Player 9 and now that will not download. I regularly use site that require Flash and I am shut down until I can figure out what is wrong. Please help.

I have the same issue after I was prompted yesterday to upgrade my Flash player. With the new version, 2/3 of Flash pages do not work. But 1/3 do work !
Example of page that does not work with new version of Flash :
http://www.youtube.com/ (the whole site)
http://www.adobe.com/fr/products/flashplayer/ (Adobe's official Flash page !)
Example of page that does work with new version of Flash :
http://www.voleursdechevaux.be/page_flash.html
On first glance, I would say that Flash loaded through JavaScript fails. Only Flash embedded through HTML works. But I am not competent enough to discover why.
Here is my current configuration (the version test at http://kb2.adobe.com/cps/155/tn_15507.html works well) :
Player Version : WIN 10.0.22.87
Debug Player : no
Operating System : Vista
Browser : Internet Explorer 8
Locale : French

Wireless not working after VMware kit installation

After installing VMWare kit, my wireless network card is not working - any clues?

there is something very wierd here. Let me recap what I KNOW is happening.
1) I can connect to WAP at boot no problem. This is true 100%
2) After sleep systems fails 100% time from 5:30 AM to 10:00PM (not sure why)
3) There have been no changes to WAP (confirmed using checksums)
4) This started immediately after 10.4.10 install.
What I have done that does NOT work
1) Repair disk perms (no errors)
2) Repair keychain (no errors)
3) Remove Parallels (expired Demo)
4) Remove/recreate network
5) Run commands indicated in other replies
What I have done that showed hope
1) If I create a new location I can use that location to recover from exactly 1 sleep. Subsequent sleeps fail for that location. once all locations are used a reboot is required.
2) Issued ipconfig setverbose 1 and watched logs. It seems that the Mac never Sees the incoming packets. I can rule out WAP issues as the Dell d620 sitting right next to the Mac is indicating packet reception at 100% (and I am only 10ft from WAP with direct line of sight).
3) issued ipconfig getpacket en1 in both working and non-working states. Woring stated returns expecte DHCP response from server. non-working state returns nothing. as in not even a blank line.
So as I see it the Mac does not appear to be reenabling the reciever post sleep. Changing locations seems to re-init the airport card but only once (why once?) enough to get it working. What I don't understand is where in software land I would even start to look. I find it hard to believe that there is a coincidental sync between an OS update and a hardware failure on a 4 week old machine.

Tecra M10-10z - 3G does not work after Win 7 installation

Tecra M10-10z I have installed Windows 7 pro 64bit
Everything is configured correctly, but connection 3G does not work: the message is " no network"
with Windows XP is ok.
I did not find firmware updates or similar.
Is there someone who can help me?
tks

Hi
In order to use the 3G you should firstly check if the 3G ericsson module was properly installed.
In case there is an yellow exclamation mark visible in the device manager, the 3G driver should be reinstalled.
I found on the Toshiba EU driver page:
[Ericsson 3G Win 7 driver|http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory =2&selFamily=5&selSeries=148&selProduct=813&selSho rtMod=null&language=13&selOS=30&selType=295&yearup load=&monthupload=&dayupload=&useDate=null&mode=al lMachines&search=&action=search&macId=&country=all &selectedLanguage=13&type=295&page=1&ID=71930&OSID =-1&driverLanguage=42]
Furthermore ensure that the 3G RF Power Control Utility has been installed properly.
The 3G RF Power Control Utility" activates your 3G on startup.
This tool can be found here:
[3G RF Power Control Utility for Win 7 64bit|http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory =2&selFamily=5&selSeries=148&selProduct=813&selSho rtMod=null&language=13&selOS=30&selType=322&yearup load=&monthupload=&dayupload=&useDate=null&mode=al lMachines&search=&action=search&macId=&country=all &selectedLanguage=13&type=322&page=1&ID=73658&OSID =-1&driverLanguage=42]
Hope the 3G network would functions after the reinstallation of both tools.

Navigating through photos in single-photo view in iphoto with trackpad is not working after installing new OS Mountain lion

I have recently download new OS Mountain lion on my macbook (white late 2010 model). I had snow leopard before.
On iphoto, when i was viewing my photos in a single-photo view (double clicking on a photo), i was unable to go to the next photo/previous photo using my trackpad. Only way i could do this was by pressing arrow buttons on my key board.
If i remember correctly, i was able to do this by using 3 fingers (sliding left to right or sliding right to left) on snow leopard.
I can navigate back and foward on my internet browser using two fingers. And yes, i have tried using my two fingers on iphoto but nothing happens.
I have checked my trackpad setting and everything seems to be right.
Any ideas how i could fix this?
Thank You
p.s. i have iphoto 09

Terence Devlin wrote:
I can navigate back and foward on my internet browser using two fingers. And yes, i have tried using my two fingers on iphoto but nothing happens.
This works here - but I'm on iPhoto 11. IIRC it worked on 09 too though.
It's not working for me.

Finger Print Scanner is not working after downloading new operating system 8.1

hi,
recently i have installed new OS windows 8.1 for my HP PAVILION DV6 laptop, but my bluetooth and finger print scanner is not working. can any one suggest me solve my problem..
txs
best regards
karim

Hi @sam1211 ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv6 Notebook and Bluetooth and HP Simplepass complications since doing a Windows upgrade. Here is a link to the HP Support Assistant. Just download and run the application. Just to make sure all drivers and software are updated as well.
Here is a document on troubleshooting and using Bluetooth if needed. Under the tips for finding a Bluetooth device, there is a section on making sure the wireless communication is turned on. This is an important section.
Here is another document with some great information about Bluetooth fixes.
Here is a link to troubleshoot the HP Simplepass software.
The HP SimplePass Identity Protection Software must be updated to v8.00.57 or later. Here is a link to download the latest. You will have to uninstall the old software.
Hope this helps you with the Bluetooth and HP Simplepass.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Whatapp is not working after installing new softwa...

hi.. i am using nokia asha 311phone since last three months. fewdays back i got a phone software update on my mobile from nokia..so i installed it..after that whatsapp application is not working..plz tell me what should i do?????

Try deleting it and downloading it again.
-------------------If this post helped you, click on accept as solution.------------------
-----------------------------Appreciate by clicking on white star.----------------------------

Simple insert, delete and update not working after oracle 10g installation

Hello,
I made a new installation of Oracle 10g (10.2.0.1.0) and created a schema . Now i try to insert or update data using simple queries, but unfortunately nothing happens. I tried inserting or updating data even via sqlplus, but unfortunately the same result. Query takes infinite time to end, so i had to manually end it every time... No errors... No warnings... but takes long time... I have given all the required permissions to the schema but the same result. Can somebody help me figure out the problem?
Tried creating a new table and the insert and delete are working fine... think the problem is with this table... Imported the rows of the table from another online database. I dont understand how this might be a problem.
Edited by: user13333704 on Mar 15, 2011 1:26 AM

However how do you generate awr reports and how to find the session wait?TO generate the AWR report
sql> ?/rdbms/admin/awrrpt
http://download.oracle.com/docs/cd/B19306_01/server.102/b14211/autostat.htm#BABDHAGF
The event column in v$session , in v$active_session_wait will show you the session wait event.What the session was actually waiting for.
HTH
Anand

Touchsceen will not work after installing new hard drive

Hello,
My HP TouchSmart 520 - 1047 c PC's hard drive crashed this week. I went out and purchased a new one, installed it, loaded my Windows 8 Pro disc in, and got it back working. The only issue so far is that my touchscreen will not work. HP support says it's a hardware issue and was no help.
Please help.
Thanks,
Mike

I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post serial numbers and case details.
If you are unfamiliar with how the Forum's private message capability works, this post has instructions.
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Java script will not work after creating new page

I am using dreamweaver cs3 and have a java script to rotate a banner in a template. This script has worked fine in the past when I created pages in Dreamwever. Now the script works fine only when I test it in a template but when I try to upload to my ISP the script will no longer work. At first I thought it was the ISP made changes but the person who sits next to me running the same version of Dreamweaver can create a page and the java works. The java is placed in a template, tested by viewing in a brower and it works, however once I try to create a new page using the template the scriipt will not work. To get around this I have the person sitting next to me save my template and then I can create pages. Also if I save the template with my pc and it updates the pages created by the template the java will no longer work.
This is very frustrating as I cannot create or modify my template on this pc. What would prevent this from working?

OK - now we are on to something ..... the script on the template only contains:
function randomImages(){
if(counter == (imgs.length)){
    counter = 0;
MM_swapImage('rotator', '', imgs[counter++]);
setTimeout('randomImages()', delay);
However when I create a new page from the template with this javascript in it the code changes to:
function randomImages(){
if(counter == (imgs.length)){
    counter = 0;
MM_swapImage('rotator', '', imgs[counter++]imgs[i]);
function randomImages(){
if(counter == (imgs.length)){
    counter = 0;
MM_swapImage('rotator', '', imgs[counter++]);
setTimeout('randomImages()', delay);

Vista Ultimate, Firefox 4.01 just installed. The back and forward buttons do not work with this new installation. Help please.

O?S is Vista Ultimate 32 bit fully updated. I have just installed Firefox 4.01. I have lost use of back and forward buttons - they are greyed out. Is there a solution please?

It is possible to have earlier data in a tab if the latest tab had target="_top" that means the back key will not work, but if your right-click on the back/forward you see a context menu. As far as I know the only difference between 3.6 and 4.0 ws that the drop-down arrow was dropped but like before you can still right-click.
There are some extensions that mess with the Back/Forward buttons.
There is a difference between gray and '''black''' on the buttons, '''black''' means there is history in that direction.
You can make Firefox 4.0.1 and Firefox 5.0 look like Firefox 3.6.17, see numbered items 1-10 in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 look like 3.6)]

Satellite A350 - FN keys not working after Windows 7 installation

Sorry for my bad english, i am forum Portugal and i don't are very good at english.
1 I installed Windows 7 on my pc, installed the drivers 7 and FN was to give. However I had another problem and had to format the pc again, now install everything again and functionality not the FN.
2 Without the drive functionality that is FN + F6/F7 brightness works. But with the drive not installed anything. It seems they are in conflict.
3 The bar at the top of the screen that appeared no longer appears. But if I go to Start -> All Programs -> TOSHIBA -> Utilities -> Settings for TOSHIBA E-cards. With it open, squeeze "Allow the mouse to show the cards" and they appear at the top, as hidden. But just gives me no way, I wish to give to the FN.
Anyone know how this is resolved?? It gave me immense way and even have tried everything, installed everything, there is nothing to block the FN key? A feature that blocks this key?? Please help me.
My PC as it says in the title is Toshiba Sattelite A350D 10Y PSALME....

To enable Fn key functionality, you need to install:
TOSHIBA Value Added Package (v1.2.28)
Utility Support Driver for Windows 7 (v1.0.25.5C)
If you installed Vista version of those packages, it may not work properly.
You need to Windows 7 versions specifically for the A350
Win7 32bit http://support.toshiba-tie.co.jp/windows7/download/Satellite_A350_32_au.htm
Win7 64bit http://support.toshiba-tie.co.jp/windows7/download/Satellite_A350_64_au.htm

HDR is not working after a new installation of Photoshop

Similar Messages

Maybe you are looking for