HDR issues causing highlights to turn red

I've been using the HDR merge function over the last few days and happily converted numerous images successfully. However, all of a sudden, pictures from the same photo shoot are being converted incorrectly and the HDR function is causing the highlights to be red and completely blown out. I'm doing nothing different and all the lighting is the same as before. Does my software have a bug? Does anyone get the same problem?
I've just tried doing the HDR merge on the same files in my old Photoshop CS3 and I don't get the problem. Perhaps there's a bug causing it???

It sounds like you have the Highlight Clipping Warning enabled.
If you press O on the keyboard, do the red areas disappear?
Also, you might have to reset the photoshop preferences, as the latest update sometimes messes with your preferences:
http://forums.adobe.com/thread/375776?tstart=0

Similar Messages

What would cause the original I Pad shut itself off while playing games or online? it is not a battery issue or time issue. When I turn it back on it goes to were I was when I was online ,but have to start games over.

What would cause the original I Pad shut itself off while playing games or online? it is not a battery issue or time issue. When I turn it back on it goes to were I was when I was online ,but have to start games over.

The original iPad has a slow processor and only 256 MB of memory so it often runs into low-memory failures.
Double click the home button and dismiss all of the recents - I do that weekly.
Then reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider - I also do that weekly.
Both seem to help to reduce the low-memory faults that occur.

Normally when I go to a website the site automatically opens, now with the updated Firefox I have to go to the http: line and highlight and turn arrow to red. Why?

The website shows on the bottom line with other websites visited, but will not open automatically, I have to go up to the mozilla.com toolbar and highlight the website and then go to the arrow and highlight it so that it turns red. Uses a lot of extra time.

You may have a user agent that is corrupted.
*http://browserspy.dk/useragent.php
See also:
*https://support.mozilla.org/kb/Websites+or+add-ons+incorrectly+report+incompatible+browser

What causes my screen on ipad to turn red?

What would cause my ipad screen to turn red?

The first thing I would do to try to end this behavior is reset the iPad. Hold the on/off and home buttons together for about 10 seconds till the Apple logo appears. Hopefully that will end the redness.
If not, the next step would be a restore. Plug your iPad into iTunes, let it sync, then press the "Restore" button on the right of the iTunes display.

Published iWebsite pages turn red when scrolling pages in iWeb

Hi everyone,
Just wondering if I'm the only person who has this issue; when I publish my iweb sites and pages (to MobileMe) all goes well, but when I then scroll my page up and down in iWeb the site turns red again as if I have changed its content.
I've tried the usual stuff (deleted caches, prefs, logged into MM under a bogus username and password) to check if the problem is a MM issue but this also occurs when I publish to a folder...
I've repaired disk permissions and did a fresh install of OS X (10.6.7) two weeks ago.
Does anyone have any other suggestions which might solve this issue? Or perhaps even the same problem?
cheers,
koen

Brilliant OT!
Although immediately posting to the discussions group says something about my personal opinion on the reliability of iWeb ... the problem was caused as you expected; the double digit finger action.
So 'no swiping in iWeb' I suppose.
The 'turning red' of published site pages was 100% reproducible by scrolling down using my trackpad, but it doesn't happen when I use my mighty mouse or the arrow buttons/scroll bar thing. (Even although nothing was selected in iWeb, bit of a bug if you'd ask me)
Thanks again for pointing out the logical and to me not so obvious
cheers,
koen

All my raw photos turn red.

Yesterday, all my raw photos turn red, first in aperture and then also in the preview.
The first photo was converted whith Nikon software (View NX2) the second whith preview, I get the same problem whith Aperture and iPhoto.
This photo is from 2011 and it was fine until yesterday.

The 4.08 Raw Camera bundle update that was released a few days ago is causing problems for Nikon users. Until Apple issues an update to fix this roll back to 4.07
Search here for many posts describing this and how to roll back.

Internet LED turns Red at a certain time of the day

I have a customer who last year would lose there internet connection like after 4:30pm each day. I was over there a couple days ago and saw it in action. I noticed that on the Actiontec GT704WG modem all the lights would start blinking and then the Internet LED would turn red with all other still green and then it would connect again for a minute and keep going through that cycle. Already did the reset of modem etc. Even happens when the Cat 5 cable is not plugged in. Could this be a power issue with the modem? Also, the ipconfig settings are fine when this is happening... Anyone have any ideas what the issue is? Thank You

All of the lights blinking? Would this include the power lights or only the Ethernet and Wireless lights? If it's the lather, it sounds like the computer searching for a way to the Internet using broadcast packets. The DSL light if it's blinking would indicate a loss of sync, and this can turn the Internet light red. Anyhow, if you can clear up what exactly was blinking, we can continue.
========
The first to bring me 1Gbps Fiber for $30/m wins!

Graphics turning Red or Black after a while for no apparent reason?

For some reason every time I import graphics to the library they are fine. But when I put them on the stage (there's about 30 of them in each of different keyframes) they seem to be replaced by black or red rectangles. In the library, they are fine, and when I export them as a .MOV they are sometimes fine. If I export them as an .AVI, however, they remain red and black. It's not all of the graphics, but the longer that I am in Flash, the more of them turn red.
I can't tell if it's one corrupt file or a corrupt installation, but it's been on three computers: a terrible laptop with Windows 7, a Mac, and a modern desktop with Windows 8.
Can anyone fill me in on what might be the cause or possible solutions? (or ways to diagnose it?)

My best guess is that you're somehow bumping up against a size limit like this Size limits | SWF, bitmap files | Flash Player 10. I know you're not using the Flash Player, but it's possible that since that limit is known there are limitations in the IDE that are related to it. Have you tried splitting your images into smaller pieces and combining several in the same Graphic symbol?

Iphone 6 while plugged in during night lit up, screen turned red then green then black. Apple icon comes on and won't work for 15 minutes

IiPhone 6 plugged in to recharge, lit up, screen turned red, ro green to black and could not get it to work. Pushing buttons cause Apple icon to appear, then did the color thing again. After unplugging for 15 minutes, it seemed to reboot and work fine all day. This occured 2 at hotels on 2 different days. Anybody have this occur and know what the deal Is. Working fine now.

See what happens tomorrow New software update iOS 8.1 out tomorrow If the problem comes back try and take photos of screen and return IPhone to store for replacement. Bsydd uk

Imported SWF background turns red (CP4)

Hey, guys.
I'm working on an e-learning project which requires me to embed an interactive swf file in my Captivate project.
It all works out fine except that the background of the swf turns red. I have tried a few things with the embedded swf in my attempts to make it work.
1. I placed a white box below all other elements. It did not work.
2. Turned the box into a movie clip. It did not work.
3. I noticed that the embedded image elements kept their backgrounds so I made a white png image and place it below all other elements. No change.
Please see the attached image. If anyone have any idea of what may cause this and how to solve the problem, please share!

Hi there
Does it begin by displaying some red blocks, then continue until the whole screen turns red and it remains that way? If so, you are likely seeing memory exhausted. Otherwise known as the "Red Screen Of Death". If that's the case, I'm guessing there is a lot of Full Motion Video clips?
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Red Timeline box. Not render line entire timeline box turns red

I ran into an issue on Premiere Pro cs3 after updating my mac to Mountain Lion. No issues until update. The entire timeline box turns red when I insert a video. Not the render line but the entire box turns completely red. anyone have any ideas?
I realize I need to update, I am a college student, but I do freelance for a nonprofit so I need this up and running as fast as I can.

That SEEMS like a case where your graphics driver needs to be updated... but NO way for anyone to tell without hardware information
More information needed for someone to help... click these links and provide the
requested information
-http://forums.adobe.com/message/4200840
-http://forums.adobe.com/thread/416679
-http://forums.adobe.com/thread/419406
ADDED
IF you have nVidia (you did not say) read
Mac & nVidia Driver http://forums.adobe.com/thread/1075592

Importing photos from iphoto to aperture causes blacks to turn blue. color corruption?

I have a large library of jpg photos in iPhoto 11 v 9.3.1 and imported the library into aperture 3.3.1
After importing to aperture, the thumbnails all look normal, but when I view the photos in full size, pure black is turning blue and pure whites are turning red.
is there a setting that i'm missing or do i need to prepare the iphoto library before importing to aperture to prevent this problem?
Has anyone else had this happen?
The original masters all look normal when viewed in the finder, so it seems like a problem with aperture.

To add to Kirby's excellent advice: Depending on the layout of your keyboard or your own command settings, the "Highlight Hot & Cold Areas" may be bound to a different key; You see the key when you select the command directly from the "View" menu. On my machine - with a german keyboard- the key is much more complicated "⇧⌥H" :
Regards
Léonie

Icon turned red after update to 12.0.1.26

My iTunes icon on my desktop turned red after I updated to 12.0.1.26. Does that mean something is wrong with my iTunes? It has never been red before.

gaetano259 wrote:
My iTunes icon turned red as well after installation but when I tried to open it came back with an error say it was not installed correctly. Has anyone else had rhis problem?
As given, the red icon is by design.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

HT5148 Why did my clip turned red when importing from QT to FCPX?

Hello. When I import my saved screenshot clip (Quicktime) to FCPX for assignment. It automatically turned red. I tried different ways of turning it back to orginial color. I failed. Help? pease....

Tom Wolsky wrote:
QuickTime screen captures don't work in FCP.
I think this a little too definitive. I have used these captures in FCP X, so I would not make such a blanket assumption.
I do reallize that issues are likely to arise, mostly due to inconsistent frame rates.

Gmail user name box turns red - cant log in

I have E5,
uptill now i was using net browser provided with nokia to login to my gmail and other web pages accounts.
Since last 5 days when i go on gmail web page from my phone, and i enter the username , the password and click the login button, the username box turns red.
I could not log in. i tried to solve the issue by restoring factory settings. But still unable to resolve the problems.
Other accounts i can log in like yahoo, irctc etc.
This is happening to gmail only.
Please help.

Hi atulkatariya,
Thank you for your post and welcome to Nokia Support Discussions!
The issue you described may be due to some changes made to the service or a password change. So we would advise you to log on to your Gmail account using a computer and check if it requires you to go through a captcha verification. If so, just fill in all the details they ask and you should be able to access the service again.
Let us know if this helps!
Puigchild
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

HDR issues causing highlights to turn red

Similar Messages

Maybe you are looking for