HDR Merge Save/Cancel controls not visible

I am using CS5 on a Mac Pro and today when creating a HDR Merge from Camera Raw the controls (Ok or Cancel) at the bottom of the screen of the HDR merge preview screen are no longer visible. The picture controls to the right of the merge are all working
I have tried restarting the computer and PS several times to no avail.
The HDR merge was working fine until my 4th merge and then the controls diasppeared. It is as if the screen is to large for the display and cannot be resized or moved. I am using Lion.
Any suggestions?

What is the current resolution setting for your screen? Is your OS X dock visible?
If you hide your OS X dock, then reset your preferences and launch Photoshop and run Merge to HDR, are the controls visible?

Similar Messages

My favorite folders not showing up under address bar on safari in my iPad Air. I do have the tab set to on under settings. The folders are still there for me to save to just not visible on safari anymore, help! tried to fix for days. Thanks

My favorite folders not showing up under address bar on safari anymore on my iPad Air.The folders are still there for me to save to just not visible, I do have the tab under settings, safari, set to on to show the favorites, and did reset the iPad, thanks

Quit all apps (Double tap the Home button and swipe the preview page up for each open app) then Reset (Hold the Sleep/Wake & Home buttons until the screen goes black and the Apple logo appears - no data will bee lost)
Make sure you have your Favorites selected properly here: Settings > Safari > Favorites

MP3 plugin controls not visible in Firefox 9

I have some MP3 files embedded on my website. When I browse to the site in Internet Explorer, the files show up complete with controls (play, pause, etc.). For the longest time, they've also worked in Firefox but now that I have upgraded to Firefox 9, the controls disappear. The files play properly if the autoplay is enabled, so the plugin seems to still work. Just no controls. So I downgraded back to Firefox 3.6 and presto, the controls show up again. I tested with other extensions (.wav and .ogg) and they all have the same issue with the controls not being visible in FF9. Any ideas?

Some further info: I am running XP and the plugin controls disappear between FF 6.0.2 and 7.0. I checked my laptop running Windows 7 and the plugin controls don't even show up in FF 3.6!

Web gallery control not visible

HI
<br />
<br />Viewing through the downloadable resources for the Flash Web Gallery templates I saw that there is the possibility of having Play/Stop/Forward/Backward/...-Controls in the lower right corner of the Flash Gallery. How can I make them visible, when I create a webgallery, they are not there when I create one. I thought it should be in the galleryconfig.xml the option
<br />
<var symboltype="boolean" name="showController" value="true" /></var>
<br />, but this does not work for me.

One more Question: In the downloadable templates there is Web Gallery 3: In the Samplefile the thumbnails are all rotated a litte, how is that done?

Display full-screen controls NOT visible

I exported my keynote presentation as a QuickTime full-screen movie. In Preferences, I have the controls checked to display full-screen controls and to never hide them. They do not show up anywhere. I also set the presentation as a slideshow to control the presentation using the arrow keys and they do not show up. In the Guide it states that as long as "Display full-screen controls" is selected in QT Player Preferences, you can make hidden controls appear by moving the pointer. They don't.
Any help out there would be appreciated...I have a deadline to meet!

Huh, I didn't realize you had to format a flash drive for a Mac, I'll check that out.
O.K. I may have something that I said I was going to try...I unlocked the file, changed *_My* permission_, the Staff and Everyone else to "Read Only" privileges, then locked again. I then zipped it and sent it to my son this morning. He said he could open it, change it but it would not allow him to save it! I'm going to test it further somehow but I don't know anybody else that has a Mac w/Keynote '08. Do you have Keynote 08? Can I send it to you to test (it would be alot easier) or to someone in the Keynote discussion area?
This message should now have a subject line..."Keynote presentation to CD to be accessed, but not changed?" When this all began, I searched discussions in Keynote on this and found nothing with a concrete answer, only that you cannot save a keynote presentation as password protected. I posted twice and no one answered. I think this part of our discussion will help Keynote people.
*Back to your area of expertise and my original question!*... Can you still look to see what key commands force the HUD for me for my QuickTime Movie as Slideshow? I know they could not change that, but the arrow controls would have to be displayed. I don't know what HUD means but I'm going to search too... I found this link: http://developer.apple.com/documentation/QuickTime/Conceptual/QT7-2Update_Guide/NewFeaturesChangesEnhancements/chapter_2_section9.html
Could you take a look and see if this is what I need? I do have Mac OS X v10.5.4 and QT v7.5 and my Preferences window does not have a recording tab but my Full screen window looks that same. When I view my A/V controls it also doesn't view as in figure 1-8. I'm confused again! QT 7.5 is the latest version, isn't it?

Volume control not visible

How do you get the volume control to reappear after is no longer appears in the bottom of the screen,

If your running Windows 7, the steps are shown below:
Enable Windows 7’s Volume Icon
Right-click an empty space on the taskbar (the bar with the Start Orb and clock) and then click Properties.
Click the Customizebutton in the Notification area section of the Taskbar and Start Menu Properties window.
Click Turn system icons on or offat the bottom left of the Notification Area Icons window.
Set the Volume icon’s behavior to On and then click OKto save the changes.
Although I am an HP employee, I am speaking for myself and not for HP.
I am also CompTIA A+, Network+ and Security+ Certified
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on “Kudos” STAR to say thanks!***

Bug: Previews in Spaces/Mission Control not visible

I've noticed a bug with Mountain Lion's Spaces/Mission Control. Sometimes when I enter MC, the previews of spaces up top don't appear (1st attachment) until I swipe to a full-screen space (2nd attachment). A restart or log out/log in resolves it but eventually the problem comes back.
I'm on OS X 10.8.2

Third party software conflict.

SSRS 2008 R2 Calendar Control not working and report not refreshing on pressing enter in Chrome.

SSRS 2008 R2 Calendar Control not working and report not refreshing on pressing enter in Chrome.

SSRS reports are always best viewed in IE and the report result what you see in IE always will not be same and consistent in thirdy party browswers.
So consider using IE as workaround.
Also please refer:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/2188de10-cff9-4e24-b14f-da5121f1c4a4/ssrs-calender-control-not-visible-in-chorme-on-server?forum=sqlreportingservices
Workaround here:
http://www.rajbandi.net/Fixing-SSRS-Report-Viewer-control-date-picker-in-Google-chrome/
-Vaibhav Chaudhari

HDR save/cancel is greyed out - bridge sooooo slow. PS6

Hi I am having more frustrations again with the HDRs engine. Now it opens and I can make some changes but it will grey out the open and cancel buttons if I move the cursor from the laptop monitor to the external monitor, forcing me to essencially force quit PS6 (something I have to do often enough in the last month or so. opening the HDR in the laptop window does not do this but hampers my workflow. I have an additional problem with bridge which hangs, lags, crashes and generally acts like it doesn't want to do anything I want it to. I have recently swithced to a VPN server and after that is when things started to get strange. I know bridge needs an open port now but so perhaps it's that. These things; the external monitor and the VPN are just as important as PS6 so.. How can I config things so they run smoothly? thanks. Perhaps if I replaced the external monitor for one with a faster refresh rate? Found a way to bypass dinamic link??? I would LOVE to find a way to do that!!! dynamic link is a real drag (literally).
I am on a macbook pro with 8GB RAM, 500 GB HD and a samsung synchmaster not mirrored.....I want to append that either monitor will cause the HDR dialog to grey out save/cancel. If I change from one app to another. THIS is what is causing it! HOW can I fix?? I will update as I see there is a new version. And report back to this thread.......It indicates that the app is up to date. No updates available. I had this problem with HDR pro early on with PS6. and the same problem is back, rendering the fooling thing useless - it freezes me out of any further actions causing me to have to force quit to get back into PS.... I had stopped using HDR pro when I upgraded to PC6 from 5.1 for this reason. Looks I will go back to good ole' reliable photomatix......Unless anyone have a fix????? Anyone?
Here is what I mean

PixelT0ast wrote:
Peter Spier,
Is it possible that the reason you are not getting this error is that you have "Don't show again" checked?
Thanks,
-matt
Sorry no. I see that message constantly. I don't believe in turning off warnings.
All comp[atibility does is save a flattened Photshop 2.0 version inside the file. ID will use that as the preview instead of making a new one if it's there, but it has no bearing on anything else, as far as I know, and makes the file much larger than necessary unless you actually plan on trying to open it in Photoshop 2 or some other application that can't read newer Photoshop files.

Lightroom CC 2015 HDR merge not importing into Catalog

When I use the new HDR merge in LR CC 2015, the new xxxxx-HDR.dng image is created but not imported into the catalog. All of the demo videos I've watched show the image being immediately imported into the catalog and visible on the filmstrip. Suggestions? TIA for your help.

Here is a +/- 3 EV HDR that both LR6/ACR9 and PS-HDR Pro do a reasonable job with, where the only adjustments are clicking Auto in LR:
Here are the three images, EV+0, EV-3, EV+3, where to get a reasonable view out the windows, the interior was nearly black and to get a reasonable view of the interior, the windows are nearly white.
Here is a side-by-side of the EV+0 shot with various adjustments applied vs the LR6/ACR9 HDR result with Auto clicked. Tonally they look similar. What is better with the LR6/ACR9 version is the view out the windows has more detail and less clipped, and the noise in the darker areas is much better, meaning LR6/ACR9 used more of the brighter image for the floor and more of the darkest image for the view out the windows, which is exactly what HDR is supposed to do:

Footer is not visible in Table control?

Hi All
I am using Table control, Footer is not visible. It is shhowing in layout, but in browser it is not showing. In properties it is checked. And Right side scrolling is working fine, but footer is not visible. We have to set programitically?? Help Please
Cheers,
Venkys.

>
sarbjeet singh wrote:
> From EHP4 onwards paginator has been replaced by this right scroll bar.
>
> if you want that back
>
> adding the following two parameters to the Web Dynpro Application will bring it back
>
> WDLIGHTSPEED (leave the value field blank)
> WDTABLENAVIGATION set to PAGINATOR
>
>
> thanks
> sarbjeet singh
Althought this technically will bring back the paginator; I really strongly recommend against doing this. By turning off lightspeed you resort back to the old rendering engine. You give up all the performance improvements that lightspeed provides. You also give up access to new UI elements and features - like drag and drop, flashIslands, threshold slider, etc. It seems to me like way too high a price to pay just to go back the paginator.

Credit control field not visible in customer master after checking Spro

Hello Gurus,
I have configured Automatic Credit Control In IMG.
I have checked all the necessary spets required for the avtivation of Automatic Credit Control.
But I am facing in problem and will appreciate all your help for this problem.
In Customer master> Sales area data> Billing Document--> delivery and payment terms. Within delivery and payment terms the feild for credit control area is not visible.
I have checked in spro>financial accounting> Ac rec & Ac payable>customer account>master data>preparation for creating customer master> define account groups with screen laypouts (customers).
Within Define account groups with screen laypouts (customers)>account group 001(soldtoparty)details>field status>sales data>billing-->Hedging and credit contr. area I have tried it with optional as well as reuired entry and still the credit control field is not visible in customer master.
Pls provide me the steps as well as solutions for the problem.
Thanks & regards,
Dev.

pls check accunt group again
rgds
nitin

Macbook, "save document" screen is not visible on left side and I can't reach the buttons to shrink it

I have a mac book with windows platform. When I attempt to save a document my save screen is not positioned for me to see the whole thing. I would resize it, but the resize arrows are off the screen with the entire left side of the window. How can I get the left side back into view or how can I shrink it so the whole screen fits in the window? Help.

I found a solution that allows me to just see the "Cancel" and "Save" buttons and, more importantly, allowed me to get at the options screen to attach a password.
With the Save Screen open, I pressed the yellow "Iconize" button in the top left. I then "uniconized" the window by clicking on the icon in the dock and the save screen had reduced in size just enough for me to see everything I needed.
Sadly, I still couldn't get at the resize handles at the bottom right.
Hope this helps.

Agent installed.. but not visible in Grid Control

Hello guys,
i have installed a new Oracle Grid Control (OMS with new database/repository) and upgraded it to 10.2.0.4.
After that i have installed a Oracle Grid control agent 10.2.0.4 agent on a host and configured it.. but the host is not visible in the Oracle Grid control.
The agent itself seems to work.
UPDATE: The problem is solved.. it was described in metalinknote #389528.1... the problem was that after the upgrade to 10.2.0.4 the secure configuration on the OMS was corrupted.
Regards
Stefan

I got the same error and as mentioned on the metalink note I fixed the problem.
however, on target tab of EM if I search clicking on the button ADD it is still dont finding the agent on the another host.
everythin seems to be ok....
any tips friends ?

[Solved]Web Service Data Control operation not visible in Data Controls

Hi!
I've created Web Service Data Control (named MyDataControl ) in my DataModel project for my web application (ADF BC 10.1.3.3). I've finished the wizard successfully (added initiate operation to the right side in step 2: Data Control Operations) but when the wizard finishes the initiate operation is not visible in the Data Controls (MyDataControl is visible without the operation). I'm using CVS so I think maybe some files were write protected while creating the control.
These are the files where Data Control is written to:
DataControls.dcx:
<AdapterDataControl id="MyDataControl" FactoryClass="oracle.adf.model.adapter.DataControlFactoryImpl"
                      ImplDef="oracle.adfinternal.model.adapter.webservice.WSDefinition" SupportsTransactions="false"
                      SupportsSortCollection="false" SupportsResetState="false" SupportsRangesize="false"
                      SupportsFindMode="false" SupportsUpdates="false" Definition="MyDataControl"
                      BeanClass="MyDataControl" xmlns="http://xmlns.oracle.com/adfm/datacontrol">
    <Source>
      <definition xmlns="http://xmlns.oracle.com/adfm/adapter/webservice" name="MyDataControl" version="1.0"
                  provider="oracle.adfinternal.model.adapter.webservice.provider.soap.SOAPProvider"
                  wsdl="my_wsdl_location">
        <service name="MyService" namespace="urn:eu.emsa.ssn" connection="MyDataControl">
          <port name="MyServicePort">
            <operation name="initiateMyService">
              <dataformat format="XML"/>
            </operation>
          </port>
        </service>
      </definition>
    </Source>
</AdapterDataControl>and MyDataControl.xml:
<?xml version="1.0" encoding="UTF-8" ?>
<JavaBean xmlns="http://xmlns.oracle.com/adfm/beanmodel" version="10.1.3.41.57" id="MyDataControl"
          BeanClass="MyDataControl" isJavaBased="false">
<MethodAccessor id="initiateMyService">
    <ParameterInfo id="ReplyTo_Address" Type="java.lang.String" isStructured="false"/>
    <ParameterInfo id="ReplyTo_PortType" Type="java.lang.String" isStructured="false"/>
    <ParameterInfo id="ReplyTo_ServiceName_PortName" Type="java.lang.Object" isStructured="false"/>
    <ParameterInfo id="ReplyTo_ServiceName" Type="java.lang.String" isStructured="false"/>
    <ParameterInfo id="MessageID" Type="java.lang.String" isStructured="false"/>
    <ParameterInfo id="payload" Type="java.lang.String" isStructured="false"/>
</MethodAccessor>
</JavaBean>A couple of days ago I've created a Data Control for another BPEL process the same way and everything was OK.
Any ideas why this is not working?
Regards!
BB
Message was edited by:
Brokenbone

Found out the reason. The problem was in ...MyApp\.adf\META-INF\connections.xml file which had write protection.
BB

HDR Merge Save/Cancel controls not visible

Similar Messages

Maybe you are looking for