HDR Pro Error Message & Abort

Wanted to see if someone on here knew the answer or had experience with this issue.
First off I'm running Mac OS X 10.6.6
PS CS5 Version 12.0.2
Here's what I did:
It doesn't matter which 3 photos I select, I have tried lots of different sets with the same results. I have tried selecting the 3 photos in both Lightroom & Bridge with the same result.
Everything goes fine, I select the 3 photos, PS HDR Pro does it's thing and it comes up with the dialogue box with the sliders to make adjustments. I do that then press "OK" and get the "creating file" progress bar. As soon as that disappears and PS flashes up the first layer it aborts and gives the following error message:
Error: General Photoshop error occurred.
This functionality may not be available in
this version of Photoshop.
- The object "document xxx" is not currently available.
Not sure what's going on since I've had CS5 since it came out and have used HDR Pro lots of times with no problem.
I've tried sets taken with different cameras (.dng's), tried importing the CR2's right off the camera without converting to .dng, tried converting them to tiffs and use them, and it's the same thing. I opened a case file with Adobe several days ago and haven't heard back. Anyone know what's up with this?

Someone may have, but chances of them discussing it here, in the Tiger Mail & Address Book forum, are slim.
Why not post your question to a more appropriate forum, like Apple.com > Support > Discussions > MacBook Pro?

Similar Messages

Treo Pro Error Message 530 5.7.1 Relaying not allowed cannot send Email from pop acct

I just purchased the treo pro thru Sprint. I love the phone I just cant seem to figure out the proper settings for my outgoing POP Email acct. Every time I set up the settings properly and attempt to send an email I get an error message "530 5.7.1 Relaying not allowed". I get this message with the outgoing server set to smtp.sprintpcs.com and i receive this error message through an "undeliverable" Email in the same account I am attempting to send from. When I have the account set to my ISP's outgoing server mail.optonline.net it will only send email if I have my device set to WIFI mode..... Any ideas? Thanks.
-Jay-
Post relates to: Treo Pro T850 (Sprint)
This question was solved.
View Solution.

audiojay11 wrote:
P.s. I read in another posting where it advises to change the outgoing port # from 25 to 587. This sounds very familiar to me because when I recently set up my blackberry I believe cablevision advised me to do that exact modification. Now here is the million dollar question. How do you change the port #'s on the treo pro?
Try adding it to the server name, e.g.: smtp.provider.com:587

Windows 8.1 pro update from 8 pro error message 0xc0000017

Creating a dedicated thread:
I'm having a problem trying to install windows 8.1 pro from windows 8 pro with an ssd and separate drive. 8 gigs of ram and 19GB free space on the
SSD. Here is the error message I get upon reboot from app store installer:
your pc needs to be repaired
there isn’t enough memory available to create a ramdisk device
error code: 0xc0000017

similar here (I had to retirn to 8.0):
0
I have this problem too, Lenovo Thinkpad X220 (4287-2SG,I5-2520M,8GB RAM, mSATA SSD RENICE X3 120GB , second harddrive:
ST320L)
WIndows 8 system is on mSata SSD 57,4GB is free on SSD.
Laptop probably freezed during upgrade to 8.1 (from MS store today) after asking if I want to store photos on Skydrive, screen
was clear I waited one hour and manually switched laptop off.
Jiri Cvrk

Adobe Acrobat X Pro - Error Message : "Adobe Acrobat Has Stopped Working"

I use Windows 7 - 64bit / CS6 Master Collection that has Adobe Acrobat x Pro.
When the computer is on for a little while, Acrobat would generate the error message that it has stopped working and then shuts down. Once that error message occurs, I cannot get Acrobat to stay open. It opens the PDF document, stays open for a few seconds then the error message occurs and it shuts down.
What helps for a short term is to restart the computer. This seems to temporarily remove the error until the computer is on for a while then the error returns.
This problem repeats. Product repair feature does not work. This has nothing to do with the license, I tried that fix and it made no differnce. I do not have this issue with other Adobe products included in the master collection.
It seems fruitless and frustrating to send a message to Adobe Support, the run around with pages and links is like smacking walls on every turn, it is obvious Adobe does not want people contacting their support. Service from Adobe for their products is poor.
I hope that someone here has the answer to the problem. Anyone?

Ok, here is the update.
The link: http://helpx.adobe.com/creative-suite/kb/acrobat-failed-launch-30-days.html , leads to a webpage that says to download a fix ZIP file named: "Acrofix.ZIP". It contains the file "acrofix.exe".
I did use this "exe" file about 2 months ago and it did nothing to fix the issue. I used it again today, because the same issue of "Adobe Acorbat has stopped working", occurred again and again it did not work, the problem of "Adobe Acrobat stopped working" presists. Again the only work around, which is temporary, is to reboot the computer.
So far these do not work:
Relicensing or Registering the Licence
Acrofix.exe
Anyone else have an answer? - or am I the only one suffering this really annoying issue?

Acrobat 7.0 Pro error message in Vista Ultimate..missing printer driver

I use to have Adobe Acrobat 7.0 Professional installed on my other computer with had XP Pro as its operating system. I could convert any Word 2003 document into a PDF and e-mail it without any problems. I just purchased a new computer with Vista Ultimate 64 bit and every time I try to convert a Word document into a PDF I get an error message that says it can't find the printer driver and to please re-install Acrobat. I did what it said and I keep getting the same error message. I even installed the newest Adobe Reader like it said. I know my printer driver works. Does anyone have a solution? It seems all the money you spend on Adobe products their support staff just wants to wash their hands and send you on some wild goose chase looking for answers on their un-user friendly site instead of answering the question or making any recommendations. If I have to update it so be it. They should have told me that. This is the last time I will fork over $600 on any of their products because their service stinks. I appreciate any help from anyone who has experienced this same problem or who knows how to rectify it. God Bless, Tony

Hi Michael, Thank you so much for the reply. You would think Adobe Support could have told me that so I really appreciate it. Do you know what I need to do to upgrade it ? Can I find an upgrade on E-Bay or do I need to go to COMP USA or some other place to buy the upgrade? Last, what exactly am I looking for to upgrade it to the newest version. (Name of product). I will also remove the other program so it won't have any other issues once I get the upgrade. Thanks again and God Bless, Tony

Acrobat 7 pro error message

getting the following error message after installing acrobat 7 pro with the adobe link-"there is a problem with adobe acrobat/reader. If it is running, please exit and try again (0:104)." It is running on windows 7 32-bit OS. Any permanent solutions?

Hi Michael, Thank you so much for the reply. You would think Adobe Support could have told me that so I really appreciate it. Do you know what I need to do to upgrade it ? Can I find an upgrade on E-Bay or do I need to go to COMP USA or some other place to buy the upgrade? Last, what exactly am I looking for to upgrade it to the newest version. (Name of product). I will also remove the other program so it won't have any other issues once I get the upgrade. Thanks again and God Bless, Tony

Cannot reinstall acrobat x pro; error message 1402

I had acrobat X pro installed, could not update, error message 1402 popped up. Adobe site suggested uninstalling Acrobat and reinstalling, uninstalled, tried to reinstall but with 57 seoncds left of reinstallation error message 1402 appeared and installation was backed out. I went from not being able to update to not having the program on my machine at all. How can I reinstall?

Here is one suggestion: http://helpx.adobe.com/acrobat/kb/error-1402-error-1406-acrobat.html. What I suggest it to follow the instructions to uninstall all versions. Then run the cleaner (http://labs.adobe.com/downloads/acrobatcleaner.html) and remove any part left of the Acrobat folder (typically in Program Folders>Adobe). Reboot as the administrator and disable anti-virus. Then try the install.

Premiere Pro error message [/Scully64/shared/adobe/MediaCore/Backend/Make/Mac/../../Src/Sequence/Tra

Hello,
Does anyone have any ideas for a solution to the following Premiere Pro CS 5 error message? Any tips/ideas would be appreciated! Full error message below:
Premiere Pro has encountered an error.
[/Scully64/shared/adobe/MediaCore/Backend/Make/Mac/../../Src/Sequence/TrackItem.cpp-177]
Error message occurs when editing/cutting out parts of footage to intergrate into a timeline sequence, when this error appears unable to continue using Premiere
Footage contains MP4 and AAC (audio)
using Premiere Pro CS5 v5.0.4, running on Mac OS X 10.9.1 (Marvericks) on Macbook pro (early 2011) with processor speed 2.7GHz (Core i7), 64-bit, 500 SATA, 4GB memory.

1. I did use PluralEyes to sync it, its a 3 camera shoot plus separate audio capture. I am running the latest version of Plural Eyes 3.
2. as far as I know I'm up to date on everything, I am running an 3.4 GHz Intel Core i7 iMac with an AMD Radeon HD 6970M 2048 MB graphics card, with 10.9.2
3. It was triggered by a specific clip, which oddly enough was a clip that Plural Eyes didn't sync with the audio, I was able to trim the clip in the timeline, then it worked fine.
However, I just started a new project and I am having the same issue.
4. Tried the new sequence trick, didn't work
5. Tried this as well, no luck
Seems like the only work around was to trim the clip, then I was able to do what I needed and had no other problems on that project, but like I said it has no reappeared on a new project. For clarity sake it is different footage but shoot on the same camera, just on a different date

QuickTime Pro error message.

I am trying to use a newly downloaded version of QuickTime Pro to stitch together jpegs into a timelapse movie. I got a vague error message "The operation couldn’t be completed. (OSStatus error -8969.)" Can anyone help?

I've got the same problem. does anybody has an solution?
how many files can QT handle?

Final Cut to soundtrack pro - Error message

Hi all, I've been using soundtrack pro to edit a FC movie. On trying to apply it back into the movie I get an error message wich to me is
total gobbley gook, it reads.
NS range Exception.
Cannot remove an Observer <Audio File Envolope Track Leader View>
for the key path "meter Jack Order" from
<NSUser Defaults 0x1090600> because it is not registered as an observer
What do I have to do to apply the edited file back into my FC project?

You are pushing the envelope working in fcp6 in Mavericks. Did you do a clean install of Mavericks and FCP? That's usually the way to get a stable system. Here's a user tip on Installing OS and FCP
https://discussions.apple.com/docs/DOC-2861
As a workaround, can you just save an aiff in soundtrack pro and bring that in to fcp?

DVD Studio Pro Error message

In dvd studio pro 4.1.2 I keep getting an error message when burning. "Media error L-EC uncorrectable error (OX11, OXO5.) I just started getting this message after years of no problems. It starts the burn and goes through Encoding but then stops less than 1 minute into Formatting/Writing Image. I have tried several different projects that I have already burned successfully in the past and I still have the same problem. I even tried burning in iDVD and have the same problem in that program.

sounds like your physical dvd burner needs replacing..
ive had similar problems and replaced the dvd unit and everything back to normal. depending on the mac model you have will depend how tricky it is, most tower units are straight forward, a few issues with some needing you to remove the plastic bit of the front of the dvd tray door so that it can come out of the g5 slot if i remember rightly. not hard though and pretty cheap. check compatibility first though to make sure the replacement dvd is going to work.

Acrobat X Pro - Error Message

Since updating Acrobat X from 10.0 to 10.1 - I get 'An Internal Error Occurred' message frequently appearing.
As error messages go it's ambigous at best as it says nothing more. Acrobat is not even open or running but the error message seems to fire up frequently expecially if you mouse over or near a PDF. An un-install and re-install has failed to cure the problem.
Very annoying - Percy Lawman - [signature deleted by host]

Hi Kelly -
Thanks for the tip.
The app on start up is in 'Certified Mode'
A 'Protected Mode' tab doesn't seem to be present.
For info - the error tab appears to pop-up even when Acrobat is not launched.
regards
Percy

Syncing notes on Macbook Pro Error Message

I've tried to sync Notes from my Iphone and Ipad to my Mac with Lion. Each time I check Notes in Icloud preferences, I get error message "System Preferences quit unexpectedly". I cannot sync my notes onto my Mac. Can someone try and help me. Thanks. Jay

You could try sigining completely out of your iCloud account, then back in but it probably won't help if it's a problem with OS X rather than with iCloud.
If you want to try, go to System Preferences>iCloud, cick Sign Out, choose Delete at all of the prompts, restart your Mac, then sign back in. This deletes the iCloud data from your Mac but not from iCloud. Your data will reappear on your Mac when you sign back in, after a brief delay as it redownloads.
Otherwise, you might want to post this question over in the OS X Mountain Lion forum: https://discussions.apple.com/community/mac_os/os_x_mountain_lion.

Premiere Pro: error message "Denoiser: Sorry, incompatible sampling-frequency"

I get this error message and the project file won't open or the system crashes. What do I do?

I would try moving my audio files to another location so PP can't find them. Once the project is open, remove the Denoiser effects and then relink the missing audio files.

Quicktime Pro Error Message Using iSight To Record

Just wanted to post this quick fix to an issue I had (BTW), before I FIGURED THIS OUT, I called Apple support and was told I'd have to pay $199.00 for QT Support... nice Apple. Anyway, if you are trying to record using the built in iSight camera and get an error message "can't record video" (I'm paraphrasing) check to see where you're saving the video (as in the folder). QT defaulted to my desktop, but it had little RED hash (minus) sign on it. I changed the saved folder location to my "Movies" folder and it worked (FYI: I changed it back to my desktop folder to see if that was really the issue, but it worked fine, so I'm not sure what desktop folder it was looking at, maybe a shared one).
Hope this helps someone and it's free.
PS: Check your settings in preferences as well.

I've got the same problem. does anybody has an solution?
how many files can QT handle?

HDR Pro Error Message & Abort

Similar Messages

Maybe you are looking for