HDs WILL NOT MOUNT AT ALL.

Ok my Lacie HDs will not mount at all anymore through my fire wire 400 ports. i have been back and forth with Apple and Lacie with this issue for months and nobody can find the issue. Heres the deal. When I bring my HDs to the Apple store and they plug them in to another computer they mount just fine. So I brought my whole system into the Apple store and ofcourse my HDs would not mount on my computer. So they tried to mount the HDs they had and they worked just fine. Mounting on USB works just fine also. So Apple tested my firewire ports and according to Apple my firewire ports are operating fine. But something is not operating fine. The tech at Apple told me that since I have 2 Lacie HDs plugged in on the same firewire bus its possible that my Mac (G4) can not tell the difference between the 2 drives and that would make them not mount at all. He also thought it would be a good idea for me to get a firewire card so my drives would be seperated and they can work on completely on 2 different busses. I have tried everything you could think of to try and get these drives to mount. I have tried to mount them one at a time, I have tried different power supplies, and firewire cords, nothing is working. Help me out..

Open up those LaZee drives and remove the HDs.
Then you can get one of these remounting kits (or anything similar and compatible):
http://eshop.macsales.com/shop/hard-drives/Cables-Mounting-Kits/
X

Similar Messages

HARD DRIVES WILL NOT MOUNT AT ALL

Ok my Lacie HDs will not mount at all anymore through my fire wire 400 ports. i have been back and forth with Apple and Lacie with this issue for months and nobody can find the issue. Heres the deal. When I bring my HDs to the Apple store and they plug them in to another computer they mount just fine. So I brought my whole system into the Apple store and ofcourse my HDs would not mount on my computer. So they tried to mount the HDs they had and they worked just fine. Mounting on USB works just fine also. So Apple tested my firewire ports and according to Apple my firewire ports are operating fine. But something is not operating fine. The tech at Apple told me that since I have 2 Lacie HDs plugged in on the same firewire bus its possible that my Mac (G4) can not tell the difference between the 2 drives and that would make them not mount at all. He also thought it would be a good idea for me to get a firewire card so my drives would be seperated and they can work on completely on 2 different busses. I have tried everything you could think of to try and get these drives to mount. I have tried to mount them one at a time, I have tried different power supplies, and firewire cords, nothing is working. Help me out..

Philip,
I have had trouble with USB lacie drives in the past. Some people swear by them, but I personally avoid them as well as maxtor.
sounds like you're stuck with them since they are that old. I would pursue something with Lacie. If every other hdd connects fine - except them, and Apple has tested the ports = seems like a problem with the drives. I'd get the data off them and see if you can't get lacie to help out.
not a solution - good luck!
rob

My Passport Pro will not mount at all

Hello,
I just bought this Western Digital My Passport Pro with the 2TB with Thunderbolt connection. I do not have a My Passort with a USB connection. It will not mount to my MacBook Pro running Mavericks 10.9.3. However it does work perfectly on my wife's computer running Lion. On my MacBook it dose not show up in finder OR Disk Utility. I called Western Digital and talked to support. They were going to try and fix something for me but said that it had to be available in Disk Utility and said that I had to call Apple for support.
Does anyone know how I can fix this problem so I can use the My Passport Pro with Mavericks? Thank you!

Did you ever get a solution to this problem?
I bought the My Passport Pro last week to use as a portable backup when travelling with my MacBook Pro (2011).
The My Passport Pro works OK on my iMac.
But, when I plug it into the Thunderbolt port on the MacBook Pro, nothing happens. Looks like it is not getting enough power.
Both iMac and MBP are running the latest version of Yosemite.
Did you get yours fixed?
Regards
Peter

External Drives will not mount

Hi guys ... this is my first post in these forums, so sorry if it is in the wrong category.
I have a Mac Pro, purchased in Feb this year. I have an iOmega Ultramax firewire drive, that is partitioned into four disks.
I have had time machine running well, and it backs everything up onto a second iOmega drive I have.
Yesterday, before I left for work, I saw TM was sbusy backing up. The finder was not responding but I just left it, as didnt have time to loko into it before leaving.
When I cam home last night, I saw it was still not responding, and TM was still trying to backup. All other apps were functioning fine.
I tried to force quit Finder and TM, but it did not work. I then shut down the Mac manually, and rebooted.
The problem has now arisen, where the partitioned drives will not mount at all. The TM backup drive is fine, and I can browse TM fine with it - so good to know all my data is backed up.
I looked at the logs in console, and see the messages saying that the drive cannot mount as it is dirty?
What I have tried as troubleshooting steps:
•Disk Utility to try and mount the drives, but they are not showing up
•Connecting the drive to my Mac Mini - still nothing.
•DiskWarrior - nothing. Only my TM backup drive and Mac HD show up.
•Running FSCK from Terminal. I can see the drives in /dev, but keep getting "Bad Super block" errors. When I try looking for another Super Block, it says nothing found, and would I like to run it manually? The same happens when run in single user mode.
•Unplugging the Mac and the drives from the Mac, waiting 5 mins, resetting the NVRAM and PRAM (booting up holding CMDPR and waiting for the second chime, shutting down, plugging in and turing n drives, rebooting ... nothing!
It seems as though I have exhausted all possible options.
I now accept that the drive is unrecoverable, and am relieved that the TM backups are OK. I am thus happy to format the drive and repartition it, then restore everything from TM. Will be a fairly big job, but at least the data is backed up.
The only problem I have, is I cannot even mount the drives to format them!
Is there any safe way of doing this over the command line. Or even better, has anybody gt any other advice as to options I can try?
I hope I have been thorough enough in my explanation here.
Thanks in advance,
Dave

The only problem I have, is I cannot even mount the drives to format them!
I have a feeling that the partition map is bad. Does the drive itself report to DU? If the drive does show up, you can select that, and click the Repair Disk button under the First Aid tab. If that doesn't fix it, with the drive selected, click the partition tab and re-partition the drive. After that, I would erase the newly created volumes with 1-pass/zero out option selected and restore the data that was on the external from TM.
If none of this works or if the drive itself (not the volumes) doesn't show up in DU, you either have a bad drive or bad controller in the external case. How old is the Ultramax? Just wondering if it might still be under manufacturer's warranty. I would check to see if you are still eligible from the manufacturer's warranty and get the whole external unit replaced. If you are out of warranty, I think it likely that you need to replace that external with a new one. I've had a drive go bad in an external case (this one I could still mount but the heads would 'freeze') and the controller on another external go bad (this one, the drive would not report to DU so I took the drive out of the enclosure, stuck the drive in another case and there was no problem with the drive.)

Tried to move sparsebundle TM backup to External HD, now HD will not mount

Long story short, I have a Macbook Pro 15" i7. I was making backups to an apple time capsule via time machine. My internal HD crashed (making clicking noises, not booting), got it replaced by apple, thinking my backup would work. Sparsebundle file is not recognized by migration assistant and will not mount via Disk Image Mounter or Disc Utility. I attempted to move the sparsebundle file to an external drive (Avastor HDX-800 1.5 TB) via FW800. It was not making any progress so I stopped the copy, deleted the sparsebundle from my Avastor Drive and unmounted it.
Now my Avastor Drive will not mount at all. Disc sounds fine and has barley moved since the incident. The drive was backed up last week but there are some essential files I made within this week that are very important.
What can/should I do?

bglawe wrote:
Hey! Thanks so much for responding so quickly.
I am currently archiving my disc on the TC to an external USB drive so hopefully I should be able to repair that disc and get my sparsebundle to work.
You're doing that via +Airport Utility?+
My main problem is however that the FW drive that I briefly attempted to copy the sparsebundle to will not mount at all. Like when I plug the drive in, nothing happens. The Avastor FW drive has FW800 FW400 and USB 2.0 connections and none of them work. The drive sounds like it is undamaged (no looped processes or clicking). Is there anything I can do to get that drive to mount (so i can see it in finder/disc utility)? Even if its with disc warriors?
I'm sure you've done some or all of this; the standard way to try to mount a balky disk is:
Disconnect and power it off for several minutes.
Check that all connections are snug and secure.
Restart your Mac, then connect the drive.
If that doesn't work, try again with different ports, cables, and combinations (a plug that works fine in one port may not make good contact in another one.
If it has it's own power supply, check those connections, too. Try a different outlet. See if you can hear it running, or feel the vibrations.
Try it on another computer.
But from your description, it doesn't sound good for the drive.

External Hard drive will not mount on desktop

I have a 17" Powerbook G4 that has replaced a broken iBook G4. I've been using a Western Digital MyBook Pro Edition as a secondary drive for my multimedia as well as my iTunes Library. It worked fine on the old iBook.
When I plug it into the Powerbook, using either USB2 or Firewire 800, it will not mount to the desktop. It DOES however appear in the System Profiler as "External HD Button and Lights". The drive is formatted for FAT32 and works fine on my Windows XP desktop machine, so I know the drive functions mechanically. A different hard drive, a Maxtor mounts to the desktop fine using USB2, so it isn't a bus issue.
This is driving me nuts. I LOVE this computer, but I have WAY more invested in music than the cost of the computer.
Thanks in advance.
Message was edited by: hempomatic

It took a while to figure it out but apparently there was a conflict with bluetooth. I disabled it and all is well.

My Ipod 4th Gen will not mount into Itunes

Please anyone with technical knowledge HELP ME.
The basic problem is that my 4th Generation Ipod will not mount into Itunes.
Let me tell you what I have done so far this includes all the R's, I have also followed the advice of reinstalling itunes and Quicktime I have also tried backwards installing to version 6 (at present I have upgraded to version 7.0.2). The ipod is visible in Windows and I still am able to use it as disk as I have programs I am using off it.
I have tried a fifth gen and also an Ipod mini and both mount onto my Itunes.
I have tried to reinstall the Ipod software, however the previous ipod updates do not work and as the Ipod cannot be mounted I cannot use Itunes to update it as it is not visible.
I have also run the Ipod Diagnostic in Itunes and everything seems fine (I have included the report if anyone can please understand it)and at the very bottom it states that the Ipod is truly Mounted. WELL ITS NOT
I really am getting desperate now as this is the same on both my Desktop and Laptop and I am getting very close to throwing the whole thing out along with all the rest of my computer equipment.
Thanks a lot
DIAGNOSTIC REPORT
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
FUJITSU SIEMENS AMILO PRO V2030
iTunes 7.0.2.16
iPodService 7.0.2.16 is currently running.
iTunesHelper 7.0.2.16 is currently running.
Current user is an administrator.
Connected Storage Devices:
IDE\DiskFUJITSUMHV2040BH______________________00000025, Bus Type ATA, Bus Address [0,0]
USBSTOR\DiskApple__iPod___________1.62, Bus Type USB
Universal Serial Bus Controllers:
VIA Rev 5 or later USB Universal Host Controller, PCI bus 0, device 16, function 0. Device is working properly.
VIA USB Enhanced Host Controller, PCI bus 0, device 16, function 4. Device is working properly.
IEEE 1394 Host Controllers:
Texas Instruments OHCI Compliant IEEE 1394 Host Controller, PCI bus 0, device 12, function 2. Device is working properly.
Connected Device Information
PAUL'S IPOD (E:\), iPod with Click Wheel running firmware version 3.1.1
Serial Number: JQ447113PQ7
Bus Speed: 61440
The last connected iPod serial number: JQ524ER2S41.
The iPod Service Logging Information:
[SERVICE: 0xDA8,09:16:59 INFO] Started C:\Program Files\iPod\bin\iPodService.exe (Sat Nov 18 09:16:59 2006)
[SERVICE: 0xDA8,09:16:59 INFO] ##### iPodService starting as a service, version: 7.0.2.16
[SERVICE: 0xDB8,09:17:00 INFO] Got signaled to go ahead... Starting device manager!
[SERVICE: 0x4F0,09:17:00 INFO] Listener Window created
[SERVICE: 0xDB8,09:17:02 INFO] [InterfaceArrival] \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0xDB8,09:17:02 INFO] device \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0xDB8,09:17:02 INFO] device is an iPod
[SERVICE: 0xDB8,09:17:02 INFO] type 0x7 drive 0x1 partition 0x0
[SERVICE: 0xDB8,09:17:08 INFO] [-1] set waiting to mount = 1
[SERVICE: 0xDB8,09:17:08 INFO] [1] Assigning session 0
[SERVICE: 0xDB8,09:17:08 INFO] [1] added device interface "\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_objDeviceNameMap
[SERVICE: 0xDB8,09:17:08 INFO] [1] added state machine 1 to m_objDeviceIdMap
[SERVICE: 0xDB8,09:17:08 INFO] [1] added device number 1 to m_objDeviceNumberMap
[SERVICE: 0xDB8,09:17:08 INFO] [1] added device interface "\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_vctDeviceInterfaces
[SERVICE: 0xDB8,09:17:08 INFO] [1] input #0 from src #0
[SERVICE: 0xD24,09:17:08 INFO] [1] input #0
[SERVICE: 0xD24,09:17:08 INFO] [MACHINE 1 INPUT #0] - (HDW) Interface Arrival
[SERVICE: 0xD24,09:17:08 INFO] [1] progress state is 2, Waiting to mount = 1
[SERVICE: 0xD24,09:17:08 INFO] [1] progress is now 2
[SERVICE: 0xD24,09:17:08 INFO] [1] progress is now 2
[SERVICE: 0xD24,09:17:08 INFO] [MACHINE 1 TRANSITION] - {Unknown} ==> {Connected}
[SERVICE: 0xD24,09:17:08 INFO] [MACHINE 1 ACTIONS] - {Connected}
[SERVICE: 0xD24,09:17:08 INFO] [1] SCSI Inquiry attempt #0
[SERVICE: 0xD24,09:17:08 INFO] VendorId: Apple
[SERVICE: 0xD24,09:17:08 INFO] ProductId: iPod
[SERVICE: 0xD24,09:17:08 INFO] revision: 1.62
[SERVICE: 0xD24,09:17:08 INFO] vendor bytes:
[SERVICE: 0xD24,09:17:08 INFO] 02 01 00 00 00 00 00 00 00 05 00 13 12 00 00 00 00 00 00 00
[SERVICE: 0xD24,09:17:08 INFO] [1] firmware version: 1.62 (0x13E)
[SERVICE: 0xD24,09:17:08 INFO] [1] Power State: Not Powered
[SERVICE: 0xD24,09:17:08 INFO] [1] Checkpoint attempt #0
[SERVICE: 0xD24,09:17:08 ERROR] Did not find first letter of stage
[SERVICE: 0xD24,09:17:08 INFO] [1] serial number 000A270002BF5F21
[SERVICE: 0xD24,09:17:08 INFO] [1] *** CONNECTED - Sending event out, device session 0.
[SERVICE: 0x4F0,09:17:11 INFO] [SIMULATED VOLUME ARRIVAL] generating volume mount for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x4F0,09:17:11 INFO] [VolumeArrive] mask = 0x1C
[SERVICE: 0x4F0,09:17:11 INFO] looking up device # for \\.\E:
[SERVICE: 0x4F0,09:17:11 INFO] type 0x7 drive 0x1 partition 0x1
[SERVICE: 0x4F0,09:17:11 INFO] iTunes device #1 found with drive letter E, mask 0x10
[SERVICE: 0x4F0,09:17:11 INFO] [1] set waiting to mount = 0
[SERVICE: 0x4F0,09:17:11 INFO] [1] input #1 from src #0
[SERVICE: 0x52C,09:17:11 INFO] [1] input #1
[SERVICE: 0x4F0,09:17:11 INFO] looking up device # for \\.\D:
[SERVICE: 0x4F0,09:17:11 INFO] type 0x2 drive 0x0 partition 0xffffffff
[SERVICE: 0x4F0,09:17:11 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
[SERVICE: 0x4F0,09:17:11 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x4F0,09:17:11 INFO] type 0x7 drive 0x1 partition 0x0
[SERVICE: 0xDB8,09:17:11 INFO] [VolumeArrive] mask = 0x1C
[SERVICE: 0xDB8,09:17:11 INFO] looking up device # for \\.\E:
[SERVICE: 0xDB8,09:17:11 INFO] type 0x7 drive 0x1 partition 0x1
[SERVICE: 0xDB8,09:17:11 INFO] iTunes device #1 found with drive letter E, mask 0x10
[SERVICE: 0xDB8,09:17:11 INFO] [1] set waiting to mount = 0
[SERVICE: 0xDB8,09:17:11 INFO] [1] input #2 from src #0
[SERVICE: 0x4EC,09:17:11 INFO] [1] input #2
[SERVICE: 0xDB8,09:17:11 INFO] looking up device # for \\.\D:
[SERVICE: 0xDB8,09:17:11 INFO] type 0x2 drive 0x0 partition 0xffffffff
[SERVICE: 0xDB8,09:17:11 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
[SERVICE: 0x52C,09:17:11 INFO] [MACHINE 1 INPUT #1] - (HDW) Volume Mount
[SERVICE: 0x52C,09:17:11 INFO] [MACHINE 1 TRANSITION] - {Connected} ==> {Mounted}
[SERVICE: 0xDB8,09:17:11 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0xDB8,09:17:11 INFO] type 0x7 drive 0x1 partition 0x0
[SERVICE: 0x52C,09:17:11 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x52C,09:17:11 INFO] [MACHINE 1 ACTIONS] - {Mounted}
[SERVICE: 0x52C,09:17:11 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x52C,09:17:11 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x52C,09:17:14 ERROR] Did not find first letter of stage
[SERVICE: 0x52C,09:17:15 INFO] [1] OS says filesystem is FAT32
[SERVICE: 0x52C,09:17:16 INFO] [1] ===== iPod Touch Wheel =====
[SERVICE: 0x52C,09:17:16 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x52C,09:17:16 INFO] 9:17:16, year 2006, day of yr. 321, GMT offset 0 isDST 0
[SERVICE: 0x52C,09:17:16 INFO] [1] progress is now 0
[SERVICE: 0x52C,09:17:18 INFO] [1] *** MOUNTED - Sending event out, device session 0.
[SERVICE: 0x52C,09:17:18 INFO] [1] Auto-launch iTunes DISABLED
[SERVICE: 0x4EC,09:17:18 INFO] [MACHINE 1 INPUT #2] - (HDW) Volume Mount
[SERVICE: 0x4EC,09:17:18 INFO] ** CItunesDevice::HandleHardwareInput()
[SERVICE: 0x4F0,09:18:21 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:18:21 INFO] [1] input #3 from src #0
[SERVICE: 0xD24,09:18:21 INFO] [1] input #3
[SERVICE: 0x4F0,09:18:21 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:18:21 INFO] [1] input #4 from src #0
[SERVICE: 0x4EC,09:18:21 INFO] [1] input #4
[SERVICE: 0x4F0,09:18:21 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:18:21 INFO] [1] input #5 from src #0
[SERVICE: 0x52C,09:18:21 INFO] [1] input #5
[SERVICE: 0xD24,09:18:22 INFO] [MACHINE 1 INPUT #3] - (HDW) CheckDevNode
[SERVICE: 0xD24,09:18:23 INFO] Connection Detection Status - 0x1806002, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xD24,09:18:23 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0xD24,09:18:23 INFO] [1] progress is now 1
[SERVICE: 0x4EC,09:18:23 INFO] [MACHINE 1 INPUT #4] - (HDW) CheckDevNode
[SERVICE: 0xD24,09:18:24 INFO] [MACHINE 1 TRANSITION] - {Mounted} ==> {Unknown}
[SERVICE: 0x4EC,09:18:24 INFO] Connection Detection Status - 0x1806002, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x4EC,09:18:24 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0x52C,09:18:24 INFO] [MACHINE 1 INPUT #5] - (HDW) CheckDevNode
[SERVICE: 0xD24,09:18:24 INFO] [MACHINE 1 ACTIONS] - {Unknown}
[SERVICE: 0x52C,09:18:24 INFO] Connection Detection Status - 0x1806400, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x52C,09:18:24 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0xD24,09:18:24 INFO] Connection Detection Status - 0x1806400, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xD24,09:18:24 INFO] [1] *** DISCONNECTED - Sending event out, device session 0.
[SERVICE: 0xD24,09:18:24 INFO] [1] progress is now 0
[SERVICE: 0xD24,09:18:24 INFO] [1] progress state is 0, Waiting to mount = 0
[SERVICE: 0x4F0,09:18:38 INFO] [VolumeRemoved] existing mask 0x10, arrive mask 0x10
[SERVICE: 0x4F0,09:18:38 INFO] [1] value = 1
[SERVICE: 0x4F0,09:18:38 INFO] [1] input #6 from src #0
[SERVICE: 0x4EC,09:18:38 INFO] [1] input #6
[SERVICE: 0x4EC,09:18:38 INFO] [MACHINE 1 INPUT #6] - (HDW) Volume Unmount
[SERVICE: 0x4EC,09:18:38 INFO] [1] progress is now 3
[SERVICE: 0x4EC,09:18:38 INFO] [1] Setting progress to 3
[SERVICE: 0x4EC,09:18:38 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0x4F0,09:18:38 INFO] [InterfaceRemoved]
[SERVICE: 0x4F0,09:18:38 INFO] [1] value = 0
[SERVICE: 0x4F0,09:18:38 INFO] removed device number 1 from m_objDeviceNumberMap
[SERVICE: 0x4F0,09:18:38 INFO] [1] input #7 from src #0
[SERVICE: 0x52C,09:18:38 INFO] [1] input #7
[SERVICE: 0x4F0,09:18:38 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:18:38 INFO] [1] Progress state is 3, Waiting to disconnect = 0
[SERVICE: 0x4F0,09:18:38 ERROR] device number 0 exists, but isn't in m_objDeviceNumberMap!
[SERVICE: 0x4F0,09:18:38 INFO] removed device interface "\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" from m_vctDeviceInterfaces
[SERVICE: 0x4F0,09:18:38 INFO] [1] input #8 from src #0
[SERVICE: 0xD24,09:18:38 INFO] [1] input #8
[SERVICE: 0x52C,09:18:38 INFO] [MACHINE 1 INPUT #7] - (HDW) Interface Removal
[SERVICE: 0x52C,09:18:38 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0xD24,09:18:38 INFO] [MACHINE 1 INPUT #8] - (HDW) CheckDevNode
[SERVICE: 0xD24,09:18:38 INFO] Connection Detection Status - 0x1806400, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xD24,09:18:38 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0x4F0,09:18:39 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:18:39 INFO] [1] input #9 from src #0
[SERVICE: 0x4EC,09:18:39 INFO] [1] input #9
[SERVICE: 0x4EC,09:18:39 INFO] [MACHINE 1 INPUT #9] - (HDW) CheckDevNode
[SERVICE: 0x4EC,09:18:39 INFO] Connection Detection Status - 0x1806400, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x4EC,09:18:39 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0x4F0,09:18:48 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:18:48 INFO] [1] input #10 from src #0
[SERVICE: 0x52C,09:18:48 INFO] [1] input #10
[SERVICE: 0x4F0,09:18:48 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:18:48 INFO] [1] input #11 from src #0
[SERVICE: 0xD24,09:18:48 INFO] [1] input #11
[SERVICE: 0x52C,09:18:49 INFO] [MACHINE 1 INPUT #10] - (HDW) CheckDevNode
[SERVICE: 0x52C,09:18:49 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0xD24,09:18:49 INFO] [MACHINE 1 INPUT #11] - (HDW) CheckDevNode
[SERVICE: 0xD24,09:18:49 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0x4F0,09:34:58 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:34:58 INFO] [1] input #12 from src #0
[SERVICE: 0x4EC,09:34:59 INFO] [1] input #12
[SERVICE: 0x4EC,09:34:59 INFO] [MACHINE 1 INPUT #12] - (HDW) CheckDevNode
[SERVICE: 0x4EC,09:35:00 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0x4F0,09:39:01 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:39:01 INFO] [1] input #13 from src #0
[SERVICE: 0x52C,09:39:01 INFO] [1] input #13
[SERVICE: 0x52C,09:39:02 INFO] [MACHINE 1 INPUT #13] - (HDW) CheckDevNode
[SERVICE: 0x52C,09:39:02 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0x4F0,09:39:02 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:39:02 INFO] [1] input #14 from src #0
[SERVICE: 0xD24,09:39:02 INFO] [1] input #14
[SERVICE: 0xD24,09:39:02 INFO] [MACHINE 1 INPUT #14] - (HDW) CheckDevNode
[SERVICE: 0xD24,09:39:02 INFO] * CItunesDevice::HandleHardwareInput()
[SERVICE: 0x4F0,09:42:41 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:42:41 INFO] [1] input #15 from src #0
[SERVICE: 0x4F0,09:42:41 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:42:41 INFO] [1] input #16 from src #0
[SERVICE: 0x4F0,09:42:41 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:42:41 INFO] [1] input #17 from src #0
[SERVICE: 0x52C,09:42:41 INFO] [1] input #15
[SERVICE: 0x4EC,09:42:41 INFO] [1] input #16
[SERVICE: 0xD24,09:42:41 INFO] [1] input #17
[SERVICE: 0x52C,09:42:41 INFO] [MACHINE 1 INPUT #15] - (HDW) CheckDevNode
[SERVICE: 0x52C,09:42:49 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x4EC,09:42:49 INFO] [MACHINE 1 INPUT #16] - (HDW) CheckDevNode
[SERVICE: 0x4EC,09:42:49 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xD24,09:42:49 INFO] [MACHINE 1 INPUT #17] - (HDW) CheckDevNode
[SERVICE: 0xD24,09:42:49 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x4F0,09:42:51 INFO] [InterfaceArrival] \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x4F0,09:42:51 INFO] type 0x7 drive 0x1 partition 0x0
[SERVICE: 0x4F0,09:42:51 INFO] [1] set waiting to mount = 1
[SERVICE: 0x4F0,09:42:51 INFO] [1] Attempt to reassign from session 0 to session 0, DENIED!
[SERVICE: 0x4F0,09:42:51 INFO] [1] added device interface "\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_objDeviceNameMap
[SERVICE: 0x4F0,09:42:51 INFO] [1] added state machine 1 to m_objDeviceIdMap
[SERVICE: 0x4F0,09:42:51 INFO] [1] added device number 1 to m_objDeviceNumberMap
[SERVICE: 0x4F0,09:42:51 INFO] [1] added device interface "\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_vctDeviceInterfaces
[SERVICE: 0x4F0,09:42:51 INFO] [1] input #18 from src #0
[SERVICE: 0x52C,09:42:51 INFO] [1] input #18
[SERVICE: 0x4F0,09:42:51 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:42:51 INFO] [1] input #19 from src #0
[SERVICE: 0x4EC,09:42:51 INFO] [1] input #19
[SERVICE: 0x4F0,09:42:51 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:42:51 INFO] [1] input #20 from src #0
[SERVICE: 0xD24,09:42:51 INFO] [1] input #20
[SERVICE: 0x52C,09:42:51 INFO] [MACHINE 1 INPUT #18] - (HDW) Interface Arrival
[SERVICE: 0x52C,09:42:51 INFO] [1] progress state is 2, Waiting to mount = 1
[SERVICE: 0x52C,09:42:51 INFO] [1] progress is now 2
[SERVICE: 0x52C,09:42:51 INFO] [1] progress is now 2
[SERVICE: 0x52C,09:42:51 INFO] [MACHINE 1 TRANSITION] - {Unknown} ==> {Connected}
[SERVICE: 0x52C,09:42:51 INFO] [MACHINE 1 ACTIONS] - {Connected}
[SERVICE: 0x52C,09:42:51 INFO] [1] SCSI Inquiry attempt #0
[SERVICE: 0x52C,09:42:51 INFO] VendorId: Apple
[SERVICE: 0x52C,09:42:51 INFO] ProductId: iPod
[SERVICE: 0x52C,09:42:51 INFO] revision: 1.62
[SERVICE: 0x52C,09:42:51 INFO] vendor bytes:
[SERVICE: 0x52C,09:42:51 INFO] 02 01 00 00 00 00 00 00 00 05 00 13 12 00 00 00 00 00 00 00
[SERVICE: 0x52C,09:42:51 INFO] [1] firmware version: 1.62 (0x13E)
[SERVICE: 0x52C,09:42:51 INFO] [1] Power State: Not Powered
[SERVICE: 0x52C,09:42:51 INFO] [1] Checkpoint attempt #0
[SERVICE: 0x52C,09:42:51 ERROR] Did not find first letter of stage
[SERVICE: 0x52C,09:42:51 INFO] [1] serial number 000A270002BF5F21
[SERVICE: 0x52C,09:42:51 INFO] [1] *** CONNECTED - Sending event out, device session 0.
[SERVICE: 0x4EC,09:42:51 INFO] [MACHINE 1 INPUT #19] - (HDW) CheckDevNode
[SERVICE: 0x4EC,09:42:51 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xD24,09:42:51 INFO] [MACHINE 1 INPUT #20] - (HDW) CheckDevNode
[SERVICE: 0xD24,09:42:51 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x4F0,09:42:53 INFO] [SIMULATED VOLUME ARRIVAL] generating volume mount for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x4F0,09:42:53 INFO] [VolumeArrive] mask = 0x1C
[SERVICE: 0x4F0,09:42:53 INFO] looking up device # for \\.\E:
[SERVICE: 0x4F0,09:42:53 INFO] type 0x7 drive 0x1 partition 0x1
[SERVICE: 0x4F0,09:42:53 INFO] iTunes device #1 found with drive letter E, mask 0x10
[SERVICE: 0x4F0,09:42:53 INFO] [1] set waiting to mount = 0
[SERVICE: 0x4F0,09:42:53 INFO] [1] input #21 from src #0
[SERVICE: 0x52C,09:42:53 INFO] [1] input #21
[SERVICE: 0x4F0,09:42:53 INFO] looking up device # for \\.\D:
[SERVICE: 0x4F0,09:42:53 INFO] type 0x2 drive 0x0 partition 0xffffffff
[SERVICE: 0x4F0,09:42:53 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
[SERVICE: 0x4F0,09:42:53 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0x4F0,09:42:53 INFO] type 0x7 drive 0x1 partition 0x0
[SERVICE: 0x52C,09:42:54 INFO] [MACHINE 1 INPUT #21] - (HDW) Volume Mount
[SERVICE: 0x52C,09:42:54 INFO] [MACHINE 1 TRANSITION] - {Connected} ==> {Mounted}
[SERVICE: 0x52C,09:42:54 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0x52C,09:42:54 INFO] [MACHINE 1 ACTIONS] - {Mounted}
[SERVICE: 0x52C,09:42:54 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x52C,09:42:54 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x52C,09:42:54 ERROR] Did not find first letter of stage
[SERVICE: 0x52C,09:43:02 INFO] [1] OS says filesystem is FAT32
[SERVICE: 0x52C,09:43:03 INFO] [1] ===== iPod Touch Wheel =====
[SERVICE: 0x52C,09:43:03 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0x52C,09:43:03 INFO] 9:43:3, year 2006, day of yr. 321, GMT offset 0 isDST 0
[SERVICE: 0x52C,09:43:03 INFO] [1] progress is now 0
[SERVICE: 0x52C,09:43:04 INFO] [1] *** MOUNTED - Sending event out, device session 0.
[SERVICE: 0x52C,09:43:04 INFO] [1] Auto-launch iTunes DISABLED
[SERVICE: 0x4F0,09:43:11 INFO] [VolumeArrive] mask = 0x10
[SERVICE: 0x4F0,09:43:11 INFO] looking up device # for \\.\E:
[SERVICE: 0x4F0,09:43:11 INFO] type 0x7 drive 0x1 partition 0x1
[SERVICE: 0x4F0,09:43:11 INFO] iTunes device #1 found with drive letter E, mask 0x10
[SERVICE: 0x4F0,09:43:11 INFO] [1] set waiting to mount = 0
[SERVICE: 0x4F0,09:43:11 INFO] [1] input #22 from src #0
[SERVICE: 0x4EC,09:43:11 INFO] [1] input #22
[SERVICE: 0x4EC,09:43:11 INFO] [MACHINE 1 INPUT #22] - (HDW) Volume Mount
[SERVICE: 0x4EC,09:43:11 INFO] ** CItunesDevice::HandleHardwareInput()
[SERVICE: 0x4F0,09:43:11 INFO] [DevNodesChanged]
[SERVICE: 0x4F0,09:43:11 INFO] [1] input #23 from src #0
[SERVICE: 0xD24,09:43:11 INFO] [1] input #23
[SERVICE: 0xD24,09:43:12 INFO] [MACHINE 1 INPUT #23] - (HDW) CheckDevNode
[SERVICE: 0xD24,09:43:12 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000000bf5f21&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xF90,09:43:16 INFO] <0x4> Got Serial #
[SERVICE: 0x200,09:43:16 INFO] <0x4> GetFormatType() returned unknown format 0
[SERVICE: 0x200,09:43:16 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0x200,09:43:16 INFO] Mounted
[SERVICE: 0x200,09:43:16 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0x200,09:43:16 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0xF90,09:43:16 INFO] Mounted
[SERVICE: 0xF90,09:43:16 INFO] [1] already mounted!
[SERVICE: 0xF90,09:43:16 INFO] [1] progress state is 0, Waiting to mount = 0
[SERVICE: 0x200,09:43:33 INFO] <0x4> GetFormatType() returned unknown format 0
[SERVICE: 0xD10,09:43:33 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xD10,09:43:33 INFO] Mounted
[SERVICE: 0xD10,09:43:33 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xD10,09:43:33 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0xF90,09:43:33 INFO] <0x4> COM request for device 1 drive letter - E
[SERVICE: 0xD10,09:43:34 INFO] Mounted
[SERVICE: 0xD10,09:43:34 INFO] Device 0 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xD10,09:43:34 INFO] Device 0 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0xF90,09:43:54 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xF90,09:43:54 INFO] Mounted
[SERVICE: 0xF90,09:43:54 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xF90,09:43:54 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0x200,09:43:54 INFO] Mounted
[SERVICE: 0x200,09:43:54 INFO] [1] already mounted!
[SERVICE: 0x200,09:43:54 INFO] [1] progress state is 0, Waiting to mount = 0
[SERVICE: 0xD10,09:43:54 INFO] Mounted
[SERVICE: 0xD10,09:43:54 INFO] Device 0 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xD10,09:43:54 INFO] Device 0 not in intermediate state. It appears to be truly mounted.
[SERVICE: 0xF90,09:43:54 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xF90,09:43:54 INFO] Mounted
[SERVICE: 0xF90,09:43:54 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
[SERVICE: 0xF90,09:43:54 INFO] Device 1 not in intermediate state. It appears to be truly mounted.

If anyone is interested I managed to solve this problem by reformatting the ipod as a mac ipod, with the help of friends system. This does get rid of the music but as I had it backed up wasn't a problem. I then plugged the mac Ipod back into a windows pc and reformatted it as a windows ipod which updated the firmware correctly and have'nt had a problem since.

How can I update my iPod classic that will not mount on iMac computer?

I can't update my iPod classic from my iTunes on my iMac computer with OSX 10.9. It will not mount or be recognized by iTunes version 12.1.
I plug it into the USB port and it charges, gives the "Do not disconnect" symbol but the computer does not recognize or mount the iPod at all. I haven't been able to update the music for years. I have four other devices associated with my Apple ID for automatic downloads. Is it too antiquated to upload any of my music from my computer to it anymore?

Ahh! The plot thickens!
I went thru the console and read the error logs. It appears that the .ipsw file does load.....I think. It's been years since I spoke computer....
Here is what I got after double clicking the .ipsw file and iTunes opened:
2014-12-28 11:05:02.430 AM syspolicyd[450]: assessment granted for iPod_13.1.3.ipsw by _XProtect com.apple.message.domain: com.apple.security.assessment.outcome2 com.apple.message.signature2: bundle:UNBUNDLED com.apple.message.signature3: iPod_13.1.3.ipsw com.apple.message.signature5: UNKNOWN com.apple.message.signature4: 3 com.apple.message.signature: granted:_XProtect SenderMachUUID: C6FC6A41-170C-3D84-BAAE-6983F164E903

After upgrading to Mountain Lion, my LaCie USB 3 drive will not mount

I just upgraded my OS to 10.8 and now my LaCie P'9230 USB 3.0 external drive will not mount. I have re-installed the USB driver and re-booted the computer and drive several times to no avail; any ideas/help?

mrfredmor_65 wrote:
I just upgraded my OS to 10.8 and now my LaCie P'9230 USB 3.0 external drive will not mount. I have re-installed the USB driver and re-booted the computer and drive several times to no avail; any ideas/help?
It's my understanding that LaCie hasn't released a Mountain Lion driver for their PCIe card yet. Sonnet uses a modified version of the LaCie driver and theirs is dead in the water too for that reason-they also warn that their driver won't work with 10.7.5 when it's released.
Indeed, yesterday I pulled the Sonnet USB 3.0 card from my Mac Pro and replaced it with a CalDigit card from OWC; CalDigit has separate drivers for 10.6, 10.7 and 10.8 and I can say that the card works with all three, the first time in 1.5 years that I've had a reliable USB 3.0 connection.

Hard drive will not mount shows up in Disk Utility

I have an external drive with a bootable OS X 10.6.8. I was in a transition between building up a SSD swapped drive. The SSD is installed in the CPU box but I have my old installation running from an external.
I have several external hard drives. They are all Firewire. Some have USB 3.0 and or eSATA options but my MacMini only talks to Firewire and USB 2.0.
I understand that you daisy chain Firewire drives and turn them on and off in sequence as they fall from the CPU box/case.
Firewire is a power source. I run the external with the OS using an AC adapter but one Firewire drive is powered through Firewire.
I have had as many as 4 external drives running along with the internal drive without a glitch while I was reorganizing files.
Today I booted off the external drive. It was running fine. I turned on one Firewire drive (the one that runs on Firewire power). That drive stumbled. I recognized the sound when there is an interruption in power. This cause the external boot drive to stall. I had to force a reboot.
Now the external boot drive will not boot up. It does not mount but Disk Utility sees it. The drive itself is bright and clear in Disk Utility but the partition (single) is faded out. I can run Verify and repair in DU. DU says it doesn't see anything to repair. It will not mount on its own or when I click the Mount button in DU. It does not produce an icon on the Desktop (because it is not mounting).
I also have SpeedTools. But although it sees the drive I cannot do anything with it. None of its tools run more than a spli second before they fail.
This drive has USB 3.0 and I see everything through USB that I see through Firewire. Connecting the other way did not get around the problem.
Of course I will buy an AC adapter for every external drive and never run them using Firewire again but the horse is out of the barn.
I have the original installation disks and could run the Archive and Install option but it would require physically swapping drives with the internal. I'd like to avoid it if possible. It is a MacMini and tedious.
Any suggestions?

I took the problematic hard drive and installed it in my Mac Mini so I could attempt a Safe Boot and then Archive and Install if necessary.
Safe Mode didn't work. The drive produced the circle with a slash symbol.
I reset the PRAM which was part of a list of steps to work through I found created by Apple Support.
I was able to boot up to Verbose Mode and view the text of the boot process. I wrote it all down. I can answer questions about the content better than typing it all out exactly. It includes, "...journal magic is bad..." "...failed to open..." and ends with "...cannot mount root, errno = 19"
I attempted Archive and Install however when it went to show what target drives were available it was a blank box and all buttons were grayed out.
I rebooted and opened Disk Utility from the DVD. The drive appeared the same with the top main line bright and the partitioned volume faded. Still was unable to mount. I ran Verify and this time a red line of text appeared "Invalid content in Journal" and at the end I ran Repair. When running I could read line by line and at one point it showed "checking volume information" then the following line "Repairing volume" the following line "Rechecking volume" more line of checking then it ended with "The volume was repaired successfully."
It still would not mount. I ran Verify again and again said "Invalid content in Journal" and this time it stopped midway saying "The volume was found corrupt and needs to be repaired. Error: This disk needs to be repaired. Click Repair Disk."
I clicked Repair and it ended with The vol. was repaired successfully."
Still unable to mount I began repeating Repair over and over. Each time it found something to repair and ended with a success message. After several more Repairs I tried Verify and it stopped midway saying to Repair the disk.
Question: Does running Repair multiple times continue to correct bits and pieces little by little or is this a generic message and we should treat it as a problem Disk Utility cannot pinpoint and is just beating its head against the wall?
The step by step instructions I downloaded mentioned running Repair more than once but it did not say that running it 20 times would erode some problems and eventually lead to a fully repaired disk (if the problem was something DU could take care of in the first place). At this point I have run Repair about 20 times total with a series of 10 back to back skipping Verify. I keep seeing the lines about invalid content in a journal and that it repaired something successfully. Yet I still cannot mount the disk.

Disk Images will not mount and Disk Utility will not runru

I am having some major problems with Disk Utility, Disk Images, and software update. First, Disk utility will not open or run. When I double-click the application icon, nothing happens, no message, nothing. I am running OSX 10.4.11. I have deleted diskutility prefs. I am able to run Disk Utility from the Startup DVD of Tiger. On first run, it verified and repaired permissions. I run verify and repair permissions several more times from Startup DVD and everything is fine. But Disk Utility on my startup HD will not work. Similary, NONE of my disk images will mount. No matter what Disk Image i try to mount, nothing will. And I cannot use Disk utility to mount them! So, no matter what I download, no images will mount. And thirdly, when I try to run software update, it will not work. I do get a message: it says, "Could not load Software Update." Finally, i tried to download Onyx to delete log files, etc.. but again, the disk image will not mount. I was able to install a dashboard widget called "maintidget" and was successful in running the daily, weekly, and monthly maintenance tasks. Can anyone help? Everything else works fine!!! All apps! Safari, Mail, iTunes, MS Office, everything works fine. Thanks for ANY help!

Previously, I had run verify permissions, repair permissions multiple times(from startup DVD) - no probems found. Deleted disk utility prefs. Run the maintenance taskes (daily, weekly, monthly). Nothing worked. But, I forget to check the drive for problems. So I ran disk scan. It found "invalid node" and repair disk could not do it. So, do I erase and do a fresh install or get DiskWarrior? I am running Leopard so I do not have Time Machine but I have backed up my documents, iTunes Library, iPhoto Library, etc... Another thing I found out the hardway is to sync all your bookmarks, mail settings and messages, etc... with .mac if you have an account. Any more suggetions?

Hard Drive will not Mount

I have a Seagate Barracuda 1.5 Gig installed in a MacPro as an additional drive and as of today the drive will not mount. Yersterday I noticed it ejected itself; I immediately rebooted and started to download the data to another drive but it ejected itself again after about 25% complete copy. I attempted to "verify drive" with Disk Utility but it was not listed. This morning it will will not mount. The drive is still under warranty so replacement is not an issue. Where I am at a loss is recovering the data. I fired up time machine and there was no data from this drive backed up (Bay 2). I checked the preferrences and the drive was not "excluded". So, I'm at a loss as to how or if I can recovery any data. I removed the drive from the MacPro and fired it up in a docking station (SATA) without results; still will not mount. Is recovering my data beyond hope? Any ideas or tips would be appreciated.
Thanks,
Koyangie

Hatter,
Tried Recovery Mode without success. Although the drive appears in Disk Utility I get an error after selecting Restore! If I click on the Image icon it will not list the contents.
There is perhaps .6 TB on this driver (images). After I posted and received yourt reply I took another look at my Time Machine and found all my data under Shared. What a relief.
Thanks for your advice. I'll return the drive to Seagate for a replacement. Hopefull I will be able to format it before sending it back.
Koyangie

External backup drive will not mount on new mac mini. still works fine on the old one. new one is running mavericks

I just bought new-to-me mac mini running OSX mavericks.
Trying to migrate from old mac mini using simpletech external hard drive.
It still mounts on my old mac mini (system 10.5) but will not mount or show up when I plug it in to the new mac mini running mavericks.
Any ideas?

BDAqua wrote:
What exactly shows in System Profiler>Hardware>USB for those drives?
Boot from the Install Disc & see if they show up, not grayed out in Disk Utility.
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
We were thinking along the same lines. While at home I dug up a firewire enclosure and put a bootable GUID formatted drive in it (that I had in one of the usb enclosures) and started her computer holding down the option key and then chose to boot from the external firewire. All usb drives are now mounting upon connection. I asume that her drive has bad sectors on it (even though the SMART status says it's OK) and is not loading all the drivers properly for USB to mount. I was suspicious from the beginning that the OS was corrupt when she first had me look at it. It was at that point that I booted it in target mode, connected to my Macbook Pro, and then CCC'd to a usb drive that I had. I then had a couple of difficulties installing the new OS. Should have known......
I am now going to put a new drive in it for her and she'll be up and running.
Thanks so much for your help and thoughts that got me thinking as well.
pax

Hard drive will not mount with 10.4 but will mount with 10.3

I have a G4 powerbook running on 10.4.11. There is a western digital my book external drive hooked up to the USB port. I have two partitions on it. I tried to change the group settings to read write and got an error saying I did not have permission. Now the first partition will mount, but the second which I tried to change will not mount.
Disk utility sees the drive but it is grayed out. DiskWarrior sees the drive.
I dragged out my old G3 running 10.3.9 and plugged it in. Works great. The disk drive partition mounts and all of the files are there. What do I need to do to get 10.4.11 to mount the disk partition?
The external drive is a Western Digital My Book 250G divided equally into two partitions. The partitions are in Mac extended format.

I'm having pretty much the same problem... Have a WD 500 GB external attached via USB. I can't say for sure that the WD caused this (wasn't paying close enough attention), but I've noticed that my own MacBook HD is no longer mounted. I can't seem to find anyway to accomplish this either. I've booted from another volume to run Disk Utility (repair/verify). I rebooted with the MacBook startup drive and still, no HD. And NOW I can't see the bootable partition I made on the WD external. What?
I feel like the opposite of a nerd, cuz I'm just scratching my head at this point. Oh yeah, and running 10.4.11...

External Hard drive will not mount on Macbook Air (mid-2011) OSX 10.9.4

Hello Everyone!
Needs some help resolving this issue. External hard drive (Toshiba v63600-C) will not mount anymore on my mothers-in-law's macbook air. She notice this problem starting on the Aug 6th. You can see it in the Disk Utility but is not mounted. I can get the her ext hard drive to mount on my Macbook Pro with no problem. I also tried my personal ext hard drive (Seagate) on her Macbook Air and it will not mount. Not sure what is going on here. Any help is appreciated in resolving this issue.
Disk Utility
Mount Point : Not mounted Capacity : 1 TB (1,000,096,367,104 Bytes)
Format : Windows NT Filesystem (Tuxera NTFS) Available : -
Owners Enabled : - Used : -
Number of Folders : - Number of Files : -
Actions Taken So Far:
1) Confirmed "external disk" is selected under Finder's Preference
2) Reset PRAM
3) Ran Verify Disk and Repair Disk under Disk Utility with no change.
4) Tried manually mounting disk in Disk Utility but get "Mount Failed" error

You may believe this is Apple's problem but I just like Baltwo have had absolutely no problems with any of my Firewire drives in Lion. So unless you can come up with much stronger evidence to the contrary, I doubt that your feeling are going to carry any weight at all.
Allan

HDs WILL NOT MOUNT AT ALL.

Similar Messages

Maybe you are looking for