HDV 30p export from FCP to Motion doesn't work

Hello all,
I have a sequence in FCP HDV 30P. Every time I am trying to export it to motion, FCP gets completely stuck to the point of force quit. How can I open the sequence in Motion?
Thanks for your help.
K

transitions and alot of other elements in fcp wont cross over to motion...try exporting as a mov with current settings then bring that into motion....

Similar Messages

Sending from FCPS to Color doesn't work (choosing Color is not possible)

Hi, i bought the final cut studio 3 update for my final cut 4.5 HD application and installed the full 47GB update and i ran all possible software updates. i even reinstalled my mac os 10.5.6 befor installing fcp. if i right click the footage in final cut pro for sending it to color 1.5 i can't choose alternative for sending it to color. sending the footage to compressor, motion or soundtrack works properly. i've never used colors befor, so... do i have to preset something in the settings? additionaly, i made a online registration for color, not for fcp. thanks for helping.
Message was edited by: Snydelchen

Hi, i bought the final cut studio 3 update for my final cut 4.5 HD application and installed the full 47GB update and i ran all possible software updates. i even reinstalled my mac os 10.5.6 befor installing fcp. if i right click the footage in final cut pro for sending it to color 1.5 i can't choose alternative for sending it to color. sending the footage to compressor, motion or soundtrack works properly. i've never used colors befor, so... do i have to preset something in the settings? additionaly, i made a online registration for color, not for fcp. thanks for helping.
Message was edited by: Snydelchen

Exports from Keynote to Flash doesn't work

I am trying to create an automatic slide show and export it as an .swf (or anything) to run on a web site and it doesn't work. For documentation of my tests go to: http://www.equalivote.com/abKeynoteExportTESTS.pdf

Another thought: If you need it to be flash, could you export the slideshow to quicktime, then put the quicktime movie into a flash project? I'm not too familiar with flash but it seems like that would be worth a try.

*** My HDV QT export from FCP shows interlacing

I have footage shot with a Z1U. Looks great when played from the timeline on my HD tv, but when I export the file as an uncompressed self-contained Quicktime Movie the quality is horrible. It's got jaggy edges, it shows interlacing and the picture quality is not as crisp. This is getting me worried. I know the file is okay because the quality is excellent from the timline. Why does it look so bad in QT? Should I NOT export it as a self-contained movie?

Why does it look so bad in QT?<<</div>
Perhaps because you're viewing an interlaced image on a progressive scan computer monitor? Maybe?
-DH

Problem exporting from FCP using compressor

Out of the blue - I'm getting batch failures trying to export from FCP for use in a DVD. Immediately after selecting compressor for export, I get an error reading "That file already exists", and a new tab appears in the media browser with a lengthy character string. Compressor opens fine, and I select Best Quality 4:3 encoding for video and aiff48 for audio. When the batch is submitted - it promptly fails and blames FCP for generating an error.
Did all kinds of restarts and work arounds to no avail. The promising news is that this error seems to occur only when exporting from FCP through Compressor.
My work-around is to export a QT movie of the piece, quit FCP, launch Compressor, and then import the QT for batching.
Hope this helps anyone else in similar situations
Martin
G5 PPC Mac OS X (10.4.8) FCP 512 post production

Hi:
How long is your movie?
The best workflow is FCP > Compressor > DVDSP.
You can encode your timeline directly to get MPEG2 video and Dolby 2 (AC3) audio files. Then import those in DVDSP and author your DVD.
Using Compressor you control the full encoding process. You can test with small parts of your movie (those where you got problems with iDVD) and find the best encoding options fopr your footage.
Of course the DVDSP learning curve is longer than iDVD but once you learned ir you probably never go back. Like iMovie and FCP.
To give you detailed info about what encoding settings to use you must post some info about your FCP project.
Hope that helps !
Alberto

Trouble Exporting From FCP 5 to Motion

Hi, I'm new to this forum and have a question. I'm trying to export a sequence of clips from FCP to a motion project. The manual says File>Export>Export to Motion Project as a path but that option does not seem to exist. I've gone the "Send to Motion Project" route but there is no option to embed content that way. How do I send my work from FCP to Motion with embedding so the changes are refelcted in FCP? Thanks.

Thanks! I actually discovered it myself by accident just a minute ago. I was selecting the sequence in the browser before and that apparently doesn't work. Got it now though. Thanks for the reply!

Export from FCP doesn't match to timeline

hello
i ve got a probleme, my export is different off my timeline.
it's aways at the same timecode, few time in the video
i checked the frame rate, off the footage, it's ok (25 fps)
try to export with the self-contained doesn't work to
i reboot the computer, and FCP
it's a long video (1h20min), but i try to export small part of it and i always have the same problem at the same time code
i try to export in full def, quicktime movie, and quicktime conversion, both fail.
the final cut station have 8
2x2,26 Ghz intel xeon
6GB of DDR3
on mac osX 10.6.2
any ideas will help
thanks

The media file may be corrupted. Open the problematic clip in QuickTime Player Pro 7 and see if it plays OK there. If not, then you'll need to re-import or recapture from the original media. If it does play OK in QuickTime, then you may have a corrupted render file(s). Locate and delete the offending file, then re-render.
-DH
ps: there is no version 8 of Final Cut

What format to export from FCP for iDVD?

I am having trouble coming from FCP to iDVD. Material was shot HDV on a Sony Z5 and I downconverted to DV to edit on FCP. I make a Quick Time Movie of the edit (as DV PAL) but the pans are all juddery. How should I export from FCP to stop the juddering on pans?

http://www.sjoki.uta.fi/~shmhav/SVCDon_a_Macintosh.html#edit_convertMPEG
BTW, this is the mother of all FAQs here Sadly the FAQ section of the forum decribes just the problem, not any solutions. And searching the forums doesn't always work either.
ObSig: I don't benefit from the link.

Everytime I export from FCP using comressor I am lose my audio, any ideas as to why this is happening. Or do I have somthing turned off and I am just missing it? Dual 2.7 Ghz PowerPC G5 1.5 GB DDR SDRAM, Mac OS X (10.4.6)

Everytime I export from FCP using comressor I am lose my audio, any ideas as to why this is happening. Or do I have somthing turned off and I am just missing it? Dual 2.7 Ghz PowerPC G5 1.5 GB DDR SDRAM, Mac OS X (10.4.6)

Exporting via Compressor may be recommended but it is slow and doesn't fully support all available filters, etc.
Try exporting the timeline as a QT Movie (the "normal" export) using Current Settings and them submit the resultant clip to Compression. Works for me...

Exporting from FCP to DVD

Hey
Just wondering if I can get some advise. I need to export my project from final cut pro to DVD but just wondering what the best way to do this would be to get the best quality DVD. (This is for a company to take out to potential clients to sell what the company does - so it needs to look good!)
My project is no longer than 5 mins
1920 x 1080 - 1080i (16:9)
Field Dominance: None
frame rate 25
I have Final Cut Studio latest version.
I'm trying out a few options at the moment using compressor - best quality - so we'll see what these look like, but I'm not sure what all the settings should be set at.
Any advise on what you think will be best would be great.
Thanks

Wouldn't use Quicktime conversion - no need. Just export from FCP as Quicktime Movie at current settings.
In my experience, changing the field dominance from interlaced to progressive can cause stuttering particularly in motion graphics - this might not be an issue if you're laying to tape for broadcast but when you convert back to interlaced for SD DVD it can look very ugly.
In any case, at the very least, you need to be using a Kona card or IOHD to do this type of conversion properly - and really, if you want progressive you should shoot progressive.
Message was edited by: Dynamicworm
Message was edited by: Dynamicworm

PAL files exported from FCP don't display

This is a strange one... SD PAL uncompressed files exported from FCP 6.03 won't display, you just see black. HD files are fine, as are SD PAL files exported a while ago - prior to a recent pro apps or QT update possibly? As a workaround, if they exported via compressor instead of by 'export quicktime' in FCP, they work fine. Shake is 4.0 since 4.1 doesn't want to display via a decklink.
Any ideas? This seems to be a new one.

Does the computer your using to view this video have Final Cut Pro installed?

Exporting from FCP and using Compressor at the same time?

Is it ok to export from FCP and use compressor at the same time? I am exporting a Self-Contained, Current Setting Quicktime Movie, and using Compressor to compress a similar HDV file to Mpeg2?

Only in FCP 7.

Best way/settings to export from FCP to DVDSP

Hey - I have a program I need to export from FCP to DVDSP.
It is approx. 1hr 15min long.
What would be the best settings to use to maximize quality?
I also want to include chapter markers for importing into DVDSP - is it better to create these in FCP or Compressor???
This is a very important showreel and quality is a major factor...
I am using: FCP 5.1.4 DVDSP 4.1.2 Compressor 2.3
Thanks for all your help in advance!
PowerPC G5 Mac OS X (10.4.9)

Hi:
<< What would be the best settings to use to maximize quality?>>
You didn't mention your movie codec. Assuming you are using DV, if your FCP projects has graphic elements and heavy filters like Color Corrections, etc. you must get the best quality exporting directly from FCP through Compressor.
If your movie is basiclally DV video with no graphics, you probably will get same quality and shorter encoding times exporting as QuickTime movie, self settings (self contained is my favorite flavor!) and using this file in Compressor.
In Compressor use the DVD: Best Quality 90 min preset as starting point taking the MPEG2 and the Dolby 2 (AC3) presets. You most probably will get the best audio level changing the followings parameters in the standard AC3 preset:
- Dialog Normalization: -31
- Compression preset: None
Using uncompressed (AIFF/PCM) audio in DVD-Rs is a major cause of playback problems and/or building errors because the high bitrate, and takes a lot of your disc space.
If you encode inside DVDSP (using the Quicktime movie file directly in DVDSP) you'll get AIFF audio. DVDSP doesn't encode your audio to AC3.
<<This is a very important showreel and quality is a major factor...>>
To save encoding testing times, take a short part/s of your movie and make some encoding test. Select some parts of your footage with fast movements in the image and/or heavy transitions to check the final result.
<>
Allways create your chapter markers in FCP or Compressor. That way you can set the exact frame where to locate it and DVDSP will preserve that position. If you add a Chapter Marker in DVDSP it will be moved to the nearest GOP boundary, not in the exact frame you decided. Check this tutorial about Chapters and Compression Markers .
Don't forget to post your FCP movie codec/settings.
<<StirFry..>>
I think that a bitrate of 7.9 Mbps with uncompressed audio (DVDSP doesn't encode audio to Dolby 2) is too high and can cause some encoding/playback errors in some DVD players. Someone else can post his mind about this ! ;D
Hope that helps !
Alberto

OBIEE Report Export from Dashboard to Excel doesn't suppress the columns as

OBIEE Report Export from Dashboard to Excel doesn't suppress the columns as expected even after the properties are set to Suppress in the report. In Dashboard it is suppressed Properly but in the excel export it is not suppressed and values for the columns are repeated.
Added the following to the instanceconfig :
<Download>
<Export xsi:type="excel">
<DataValue>UseFormattedValue</DataValue>
<RepeatRows>false</RepeatRows>
</Export>
</Download>
But then could not restart services.The following error occured :
Util Logger] Exception occurred:
 Severity:1
 Type:PKN3saw9ExceptionE
 File:saxreader.cpp
 Line:681
 Message:Sax parser returned an exception.
Message: The prefix 'xsi' has not been mapped to any URI, Entity publicId: /oracle/ofm/instances/instance1/config/OracleBIPresentationServicesComponent/coreapplication_obips1/instanceconfig.xml, Entity systemId: , Line number: 43, Column number: 26
Edited by: 887111 on Mar 27, 2013 11:23 PM

Problem solved!!
 
See this part of the query:
 
if :P15_GESTOR_PROPIETARI='-3' then 
w:= w||' AND (("STASVWREPORT_TASQUES"."GES_GES_ID"=:GESTOR '; 
w:= w||'OR "STASVWREPORT_TASQUES"."GES_GES_ID_ESTA_ASSIGNADA"=:GESTOR)'; 
w:= w||'OR ("STASVWREPORT_TASQUES"."AGR_***_***_ID"=:P15_CANVI_DE_CLUB ';
w:= w||' AND "STASVWREPORT_TASQUES"."PUBLICA"=''S''))'; 
end if; 
 
when instead of :P15_CANVI_DE_CLUB I put a value (say ''EE'') it works correctly, finally I created an application item (ASSOCIAT) and when when I change :P15_CANVI_DE_CLUB I set :ASSOCIAT to the same value and the query is based on this application item:
 
if :P15_GESTOR_PROPIETARI='-3' then 
w:= w||' AND (("STASVWREPORT_TASQUES"."GES_GES_ID"=:GESTOR '; 
w:= w||'OR "STASVWREPORT_TASQUES"."GES_GES_ID_ESTA_ASSIGNADA"=:GESTOR)'; 
w:= w||'OR ("STASVWREPORT_TASQUES"."AGR_***_***_ID"=:ASSOCIAT '; 
w:= w||' AND "STASVWREPORT_TASQUES"."PUBLICA"=''S''))'; 
end if;

Export from FCP directly into DVD studio pro?

Is it possible to export from FCP directly into DVD studio pro? If not, what is the preferred file format because my exported quicktime files come up as "incompatible format" when I try to add them into my DVD project. Any help is appreciated.

You need to encode audio as well from Compressor. You'll have 2 files - audio and video.
Here's a tutorial:
http://www.youtube.com/watch?v=wFgJpd7DEWw
Message was edited by: Eric Pautsch1

HDV 30p export from FCP to Motion doesn't work

Similar Messages

Maybe you are looking for