HDV 720p24 Export / Conversion Problems - Help!

Greetings all,
So I'm pulling my hair out over this problem.  I have some footage that was captured using the following settings from a JVC camera:
Apple HDV 720p24, 1280 x 720 (1248 x 702) Millions
16-bit Integer (Little Endian), Left, 48.000kHz
16-bit Integer (Little Endian),Right, 48.000kHz
FPS: 23.98
Data Rate: 19.89
I converted to ProRes, and brought it into Final Cut.  All is well.  The footage looks GREAT in final cut... I was able to do my edits and all that fluff and now I'm trying to export to an H.264 file for Vimeo / YouTube.
However, I CANNOT get something that works.  I've done so many tests at this point its rediculous.  I've read through all the forums I could and still nothing is helping.
My main problem is crazy jagged edges over all the video (some call them mouse teeth).  The audio is fine though... at least I got that right.
I've tried de-interlacing but it didn't help.  I don't get why IN FINAL CUT the video looks so pristene, but any sort of export (even a 'send to compressor') yields a bunch of jagged and pixalated mumbo-jumbo.
Please Help! 

Thanks for the tips guys!  Those shortcuts were helpful - and I was able to confirm that my settings indeed matched.
I think I fixed my issue though!  My problem was in my render settings.
Sequence--> Settings--> Render Control
Mine was set by default to 33% for some reason.  I've done many projects in FC, but this was my first with the JVC HDV 720p stuff - so i'm guessing when FC created the session to match the video, it changed that setting as well.  I bumped it back up to 100% and all is well.
I'm rather surprised though that FC won't render at 100% when you export or send to compressor or anything of that sort.  So anyone having the same "jagged pixelation" on output - thats probably the issue.
Thanks again guys.  I wouldn't have stumbled upon that w/out your direction.

Similar Messages

  • Exporting HDV 720p24 to .mov

    I've edited a 2 minute in HDV 720p24 and I'm trying to export using QuickTime Conversion to .mov and .flv. When its done, (on both files in both high / low res) I get "stutters" or brief jumps in my video, in general, but not always the same spots. When I bring the timeline into 16:9 SD and export from there, it looks smooth. The only issue is that I have a lot of cropped segments of video using "Motion" on my HDV timeline that are now out of position, wrong size, etc.
    Can I export out of HDV to .mov and .flv using QuickTime Conversion?
    If SD is the answer, is there a way to keep my sequence intact?
    My system is as follows:
    Mac OS X 10.5.5
    2 x 2.8 GHz Quad-Core Intel Xeon
    FCP 5.1.4
    QuickTime 7.5.5

    Try exporting your sequence using Quicktime movie, self contained. Open the file using Quicktime, and make sure everything is ok with graphics and stuff. If the file looks fine, do an H.264 .mov export, then a flash export. Remember if using Flash 9, you can just change the .mov extension to .flv. If using earlier versions of Flash, this won't help.
    ps. I believe you can set these compressions up in compressor as well, which could save you some time.
    good luck. If this doesn't work, I have another trick you can try...

  • Quicktime 7.4 solved my HDV 720p24 capture problem

    Ok so I know there are problems with quicktime 7.4 and after effects in leopard, but since I'm not using any after effects or leopard on my project I took the plunge. A little back info: finished movie in FCP 6.0.2 dual 2.0 G5 5gb ram Decklink HD 3Tb x-raid os 10.4.11 ,print to tape HDV 720p24 recording onto a JVC BR HD50 deck, attempted recapture immediately after print to tape was done and would get time-code break on recapture.( Pulled out lots of hair, read lots of similar threads of others also going suddenly bald) I read post after post about this but no answers on 7.4 so here is mine. After updating to quicktime 7.4 print to tape and recapture worked perfect for my 89 min movie. _*If you don't use after effects*_ it seems to be safe to upgrade to 7.4 to solve some HDV capture issues with the JVC HDV deck.
    Message was edited by: Robert Simoneaux

    Then, the Debreaker that comes with the latest iSquint will definitely fix your problem. iSquint and several other applications were creating invalid .mp4 files when specifically converting from .flv's. The author has discovered this and released the latest version that patches his app so that it now creates standard .mp4's AND has released the Debreaker app that will fix the files created by HIS app, and by other apps suffering from the same problem.
    (The reason why they work in older QuickTime is because that version wasn't properly checking for valid file information. The latest version does)
    Message was edited by: Kyn Drake

  • Oracle to Mysql character set conversion problem!!! PLZ IGNORE

    Hi Experts,
    I have created a database link from Oracle 10g to Mysql 5.
    I have installed Oracle Gateway 11g for this purpose.
    When i retreive the data from sql plus the text is displayed as question marks.
    Oracle 10g Database character set is WE8MSWIN1252
    Mysql character set --->latin1
    Character set of ODBC connector for mysql is  latin7
    Character set in the parameter file of HS folder is WE8MSWIN1252When i retrieve data from sql developer the text is fine(as i think it directly takes the character set of target) but
    when i login from sqlplus i get question marks!
    I have another post in Heterogeneous Connectivity forum
    Re: Oracle to Mysql character set conversion problem!!! PLZ HELP
    Kindly update your comments there,
    @@@@@@@@@@@@@@2
    Appreciate your help,
    regards
    Edited by: user10243788 on Apr 21, 2010 3:25 AM

    It is OK to post a globalization-related question in this forum in addition to the forum pertaining to the main technology. Not all experts follow all possible forums on OTN. Of course, you should cross-link the posts to let people merge the answers.
    Regarding the problem itself, make sure that SQL*Plus has the right NLS_LANG setting in the environment. On Windows, in the Command Prompt:
    C:\> set NLS_LANG=.WE8PC850
    C:\> sqlplus ...On Unix:
    $ setenv NLS_LANG .WE8ISO8859P1   (or NLS_LANG=.WE8ISO8859P1; export NLS_LANG)
    $ sqlplus ...-- Sergiusz

  • PDF Conversion problem

    Hi ABAPers
    While sending smartform as a mail attachment(PDF Format) i am facing problem.
    While opening the PDF attachment in SOST (T-code), It shows a error pop up.(I.e., Conversion Problem in PDF). Some pages are getting opened as a blank page and some are not getting opened.
    What may be the prolem.
    Please help Me out ............
    But it works properly in IDES version.
    In IDES i have ADOBE 5.0 Version, In Live server it is ADOBE 6.0 ,7.0.

    Hi,
    Thanks for your feedback
    There is no problem in the coding , is there any thing we have to do in configuration level regarding PDF ?????
    *& Report  ZVNPAML
    REPORT  zvnpaml.
    TABLES: somlrec90.
    DATA: it_zvnpa  TYPE TABLE OF zvnpa,
          it_zvnpa1 TYPE TABLE OF zvnpa,
          wa_zvnpa  TYPE zvnpa,
          it_head   TYPE TABLE OF zvnpa,
          it_head1  TYPE TABLE OF zvnpa,
          wa_head   TYPE zvnpa,
          wa_head1  TYPE zvnpa,
          fmname    TYPE rs38l_fnam,
          tot       TYPE zvnpa-wrshb,
          otfout    TYPE ssfcrescl,
         outopt   type SSFCRESOP,
          pdftab    TYPE TABLE OF tline WITH HEADER LINE,
          datab     TYPE TABLE OF itcoo WITH HEADER LINE,
          conpar    TYPE ssfctrlop,
          mailrec   TYPE swotobjid,
          outopt    TYPE ssfcompop,
          jobopt    TYPE ssfcresop,
          jobout    TYPE ssfcrescl,
          w_return  TYPE ssfcrescl,
          it_otf    TYPE itcoo OCCURS 0 WITH HEADER LINE,
          binsz     LIKE sood-objlen,
          i_tline   TYPE TABLE OF tline WITH HEADER LINE,
          wa_buffer TYPE string,"To convert from 132 to 255
          i_record  LIKE solisti1 OCCURS 0 WITH HEADER LINE.
    DATA: wa_doc_data   TYPE sodocchgi1,
          it_pack       TYPE TABLE OF sopcklsti1,
          wa_pack       TYPE sopcklsti1,
          it_mailhead   TYPE TABLE OF solisti1,   " OCCURS 1 WITH HEADER LINE,
          wa_mailhead   TYPE solisti1,
          it_mailbody   TYPE TABLE OF solisti1,      "  OCCURS 0 WITH HEADER LINE,
          wa_mailbody   TYPE solisti1,
          it_receiverid TYPE TABLE OF somlrec90,  " OCCURS 10 WITH HEADER LINE.
          wa_receiverid TYPE somlrec90,
          it_attach     LIKE solisti1 OCCURS 0 WITH HEADER LINE,
         wa_attach     TYPE solisti1,
          lncnt         TYPE i.
    DATA: lv_spool TYPE tsp01-rqident,
          wa_line  TYPE tsp01-rqident,
          it_pdf_output TYPE TABLE OF tline.
    SELECTION-SCREEN BEGIN OF BLOCK vendor WITH FRAME TITLE text-w03.
    *PARAMETERS: pa_lifnr TYPE lfa1-lifnr,
               pa_bukrs TYPE zvnpa-bukrs,
    PARAMETERS:     pa_augdt TYPE zvnpa-augdt.
    SELECT-OPTIONS: pa_mail FOR somlrec90-receiver NO INTERVALS.
    SELECTION-SCREEN END OF BLOCK vendor.
    SELECT * FROM zvnpa INTO CORRESPONDING FIELDS OF TABLE it_zvnpa1
                        WHERE augdt =  pa_augdt
                        AND   bukrs =  '2000'
                        AND   flag  <> 'X'.
                                                 konto = pa_lifnr AND
                                                 bukrs = pa_bukrs AND
    IF it_zvnpa1 IS NOT INITIAL.
      SORT it_zvnpa1 BY konto.
      LOOP AT it_zvnpa1 INTO wa_zvnpa.
        APPEND wa_zvnpa TO it_zvnpa.
        CLEAR: wa_zvnpa.
        AT END OF konto.
          SORT it_zvnpa BY ttref augbl wrshb shkzg.
    *it_head[] = it_zvnpa[].
          LOOP AT it_zvnpa INTO wa_zvnpa WHERE shkzg = 'S'.
            APPEND wa_zvnpa TO it_head1.
            CLEAR: wa_zvnpa.
          ENDLOOP.
    *delete adjacent duplicates from it_head comparing ttref.
          SORT it_head1 BY ttref augbl wrshb shkzg.
           LOOP AT it_head1 INTO wa_head1.
            tot = tot + wa_head1-wrshb.
            wa_head = wa_head1.
            AT END OF ttref.
              wa_head-wrshb = tot.
              APPEND wa_head TO it_head.
              CLEAR: wa_head,tot.
            ENDAT.
            CLEAR: wa_head1.
          ENDLOOP.
          SORT it_head BY ttref augbl wrshb shkzg.
          CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
            EXPORTING
              formname = 'ZVNPASF'
            IMPORTING
              fm_name  = fmname.
          conpar-no_dialog = 'X'.
          conpar-getotf    = 'X'.
          outopt-tddest    = 'LOCL'.
          outopt-urlcall   = fmname.
          outopt-tdnoprev  = 'X'.
         outopt-tdnewid   = 'X'.
          CALL FUNCTION fmname
           EXPORTING
      ARCHIVE_INDEX              =
      ARCHIVE_INDEX_TAB          =
      ARCHIVE_PARAMETERS         =
              control_parameters         = conpar
      MAIL_APPL_OBJ              =
      MAIL_RECIPIENT             =
      MAIL_SENDER                =
              output_options             = outopt
              user_settings              = ' '
            IMPORTING
      DOCUMENT_OUTPUT_INFO       =
              job_output_info            = w_return
      JOB_OUTPUT_OPTIONS         =
            TABLES
              it_zvnpa                   = it_zvnpa
              it_head                    = it_head.
         READ TABLE w_return-spoolids INTO wa_line INDEX 1.
         IF sy-subrc = 0.
           lv_spool = wa_line.
           CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
             EXPORTING
               src_spoolid              = lv_spool
               no_dialog                = ' '
               dst_device               = 'LOCL'
             TABLES
               pdf                      = it_pdf_output
             EXCEPTIONS
               err_no_otf_spooljob      = 1
               err_no_spooljob          = 2
               err_no_permission        = 3
               err_conv_not_possible    = 4
               err_bad_dstdevice        = 5
               user_cancelled           = 6
               err_spoolerror           = 7
               err_temseerror           = 8
               err_btcjob_open_failed   = 9
               err_btcjob_submit_failed = 10
               err_btcjob_close_failed  = 11.
          it_otf[] = w_return-otfdata[].
          IF it_otf[] IS NOT INITIAL.
            CALL FUNCTION 'CONVERT_OTF'
              EXPORTING
                format        = 'PDF'
                max_linewidth = 132
              IMPORTING
                bin_filesize  = binsz
              TABLES
                otf           = it_otf
                lines         = i_tline.
            LOOP AT i_tline.
              TRANSLATE i_tline USING ' ~'.
              CONCATENATE wa_buffer i_tline INTO wa_buffer.
            ENDLOOP.
            TRANSLATE wa_buffer USING '~ '.
            DO.
              i_record = wa_buffer.
              APPEND i_record.
              SHIFT wa_buffer LEFT BY 255 PLACES.
              IF wa_buffer IS INITIAL.
                EXIT.
              ENDIF.
            ENDDO.
          ENDIF.
          IF i_record[] IS NOT INITIAL.
            it_attach[] = i_record[].
           CALL FUNCTION 'SX_TABLE_LINE_WIDTH_CHANGE'
            EXPORTING
              LINE_WIDTH_SRC                    = '132'
              LINE_WIDTH_DST                    = '255'
              TRANSFER_BIN                      = ' '
             TABLES
               content_in                        = i_tline[]
               content_out                       = IT_ATTACH[]
            EXCEPTIONS
              ERR_LINE_WIDTH_SRC_TOO_LONG       = 1
              ERR_LINE_WIDTH_DST_TOO_LONG       = 2
              ERR_CONV_FAILED                   = 3
              OTHERS                            = 4
           IF sy-subrc <> 0.
            MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
           ENDIF.
           it_attach[] = w_return-otfdata[].
           IF it_pdf_output[] IS NOT INITIAL.
             it_attach[] = it_pdf_output[].
            wa_mailbody-line = 'Dear Sir / Madam,'.
            APPEND wa_mailbody TO it_mailbody.
            wa_mailbody-line = 'Please be informed that we have remitted the payment towards your outstanding bills as per the attachment:'.
            APPEND wa_mailbody TO it_mailbody.
            wa_mailbody-line = ' '.
            APPEND wa_mailbody TO it_mailbody.
            wa_mailbody-line = ' '.
            APPEND wa_mailbody TO it_mailbody.
            wa_mailbody-line = 'Best Regards,'.
            APPEND wa_mailbody TO it_mailbody.
            wa_mailbody-line = 'Mary. G '.
            APPEND wa_mailbody TO it_mailbody.
            wa_mailbody-line = 'Finance department'.
            APPEND wa_mailbody TO it_mailbody.
            wa_mailbody-line = 'Intimate Fashions (I) Pvt Ltd'.
            APPEND wa_mailbody TO it_mailbody.
            wa_mailbody-line = ' '.
            APPEND wa_mailbody TO it_mailbody.
            wa_mailbody-line = 'Please do not print this email unless it is absolutely necessary.  Become environment friendly.'.
            APPEND wa_mailbody TO it_mailbody.
            wa_mailbody-line = 'E-MAIL DISCLAIMER.'.
            APPEND wa_mailbody TO it_mailbody.
            wa_mailbody-line = 'If you are not the addressee of this mail, please delete this. Intimate Fashions does not accept any liability on the improper usage of this mail. It may also be legally '.
            APPEND wa_mailbody TO it_mailbody.
            wa_mailbody-line = 'privileged. Internet communications cannot be guaranteed to be timely, secure or virus free'.
            APPEND wa_mailbody TO it_mailbody.
            DESCRIBE  TABLE it_mailbody LINES lncnt.
            wa_doc_data-obj_descr  = 'Remittance details - Brunet'.
            wa_doc_data-expiry_dat = sy-datum + 10.
            wa_doc_data-obj_name   = 'TRIAL'.
            wa_doc_data-sensitivty = 'F'.
            wa_doc_data-doc_size   = lncnt * 255.
            CLEAR wa_pack.
            CLEAR wa_pack-transf_bin.
            wa_pack-doc_type   = 'RAW'.
             wa_pack-transf_bin = ' '.
            wa_pack-head_start = 1.
            wa_pack-head_num   = 0.
            wa_pack-body_start = 1.
            wa_pack-body_num   = lncnt.
             wa_pack-doc_size   = lncnt * 255.
            APPEND wa_pack TO it_pack.
            CLEAR: lncnt,wa_pack.
            DESCRIBE  TABLE it_attach LINES lncnt.
            wa_pack-transf_bin = 'X'.
            wa_pack-head_start = 1.
            wa_pack-head_num   = 1.
            wa_pack-body_start = 1.
            wa_pack-body_num   = lncnt.
            wa_pack-doc_type   = 'PDF'.
            wa_pack-obj_name   = 'VNPA'.
            CONCATENATE 'Vendor Payment Advice' '.PDF' INTO wa_pack-obj_descr.
             wa_pack-obj_descr  = 'Vendor Payment Advice'.
            READ TABLE it_attach INDEX lncnt.      "INTO WA_ATTACH
             wa_pack-doc_size   = ( lncnt - 1 ) * 255 + STRLEN( it_attach ).
            wa_pack-doc_size   = lncnt * 255.
            APPEND wa_pack TO it_pack.
            CLEAR: lncnt,wa_pack.
            wa_mailhead = 'Vendor Payment Advice'.
            APPEND wa_mailhead TO it_mailhead.
            CLEAR: wa_mailhead.
            LOOP AT pa_mail.
              wa_receiverid-receiver = pa_mail-low.
              wa_receiverid-rec_type = 'U'.
              APPEND wa_receiverid TO it_receiverid.
              CLEAR:wa_receiverid.
            ENDLOOP.
           wa_receiverid-receiver = 'xxxxx'.    "(I have given mail id here )
           wa_receiverid-rec_type = 'U'.
           APPEND wa_receiverid TO it_receiverid.
           wa_receiverid-receiver = 'xxxxx'.    "(I have given mail id here )
           wa_receiverid-rec_type = 'U'.
           APPEND wa_receiverid TO it_receiverid.
           wa_receiverid-receiver = 'xxxxx'.    "(I have given mail id here )
           wa_receiverid-rec_type = 'U'.
           APPEND wa_receiverid TO it_receiverid.
           CLEAR:wa_receiverid,lncnt.
            CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
              EXPORTING
                document_data                    = wa_doc_data
                put_in_outbox                    = 'X'
                commit_work                      = 'X'
           IMPORTING
              SENT_TO_ALL                      =
              NEW_OBJECT_ID                    =
              TABLES
                packing_list                     = it_pack
                object_header                    = it_mailhead
                contents_bin                     = it_attach[]
                contents_txt                     = it_mailbody
                 CONTENTS_HEX                     = it_attach
              OBJECT_PARA                      =
              OBJECT_PARB                      =
                receivers                        = it_receiverid
             EXCEPTIONS
               too_many_receivers               = 1
               document_not_sent                = 2
               document_type_not_exist          = 3
               operation_no_authorization       = 4
               parameter_error                  = 5
               x_error                          = 6
               enqueue_error                    = 7
               OTHERS                           = 8.
             IF sy-subrc = 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
              LOOP AT it_zvnpa INTO wa_zvnpa.
                wa_zvnpa-flag = 'X'.
                MODIFY it_zvnpa FROM wa_zvnpa TRANSPORTING flag.
              ENDLOOP.
              MODIFY zvnpa FROM TABLE it_zvnpa.
            ENDIF.
          ENDIF.
          CLEAR: wa_zvnpa,it_zvnpa,it_otf,it_otf[],w_return,lncnt,
                 wa_doc_data,
                 wa_head,it_head,it_head1,
                 i_record,i_record[],
                 i_tline,i_tline[],
                 it_pack,
                 wa_pack,
                 it_mailhead,
                 wa_mailhead,
                 it_mailbody,
                 wa_mailbody,
                 it_receiverid,
                 wa_receiverid,
                 it_attach.
        ENDAT.
      ENDLOOP.
    ENDIF.

  • How to debug file content conversion problems?

    Hi,
    I'm trying to debug a file content conversion problem.  I'm mapping a few nodes in an IDOC to a file of fixed length fields.  I'm using the "<Node A>.fieldFixedLengths", "<Node B>.fieldFixedLengths", "<Node C>.fieldFixedLengths", etc. parameters to specify the fixed length records.
    However, a certain node (for e.g. Node B) is causing a problem and if it is present in the IDOC, the output file does not get created.  Upon checking the XI monitor, I notice that the file gets mapped correctly and thus the problem lies when the file adapter does the file content conversion.  How do I debug this because there is no descriptive error in the XI log?  If this node is not present, the file gets generated fine.
    Thanks,
    Basant Gupta

    Hi,
    If your SXMB_MONI shows, success status, then go to RWB->Message Monitoring->Message display tool and then check Audit log for the analysis,
    So it wil help you debug the situation.
    If there is no error, then check RWB->Component Monitoring->Adapter Monitoring for you file communciation channel..
    /people/michal.krawczyk2/blog/2005/01/02/simple-adapter-and-message-monitoring
    Regards,
    Moorthy

  • Journals conversion problem.

    Hello,
    We have a currency conversion problem with the journals table.
    Steps:
    1.- We insert a journal in Local Currency (LC) with the journals functionality. Both convert at average rate (for example), so when we run currency conversion rules the value is converted in Legalapp application, but not in Journal Table. So if the users or auditors need to see all the journals in EUR is not possible to extract with the journals reports.
    2.- Also we have the problem when we apply the carry forward rules for the next year, and the RE-Open functionality. Example, the flow of the year N applies at average rate, when we make the carry forward rule it goes to Opening Balance flow, and this opening balance doesn´t have currency conversion rule (AS-IS)(we cannot use an OPEAVG rule because we need the historical value in the opening balance flow). So we lose the EUR position value because we don´t have a journal to apply the RE-OPEN functionality.
    3.- We have the possibility of inserting the Journal in LC and EUR (Group Currency) also, but here you are obligating to the users to manually convert the values of each account of each journal, and can be mistakes of the value that the user insert in the Journal Entry, with the values of the application (converted with the currency conversion functionality).
    Do you know how can we solve this error?
    Regards,

    Hi,
    1. Journal tables contains just values for LC and only the posted journals are converted.
    The Corrency conversion will be applied just for journal posted not for all journals.
    You can see the value reflected into application just checking the the reports for special Data Source used by journal.
    Journal module is used for adjustment which means the auditors can see the adjustment into local cuurency and just the final value posted. The rest of journal not posted has no importance because they don't have any impact for database values.
    2. I don't think I understand the point which means I will leave other people to help ou with this poin
    3. I don't understand why you have to run Currency Conversion manually.
    When you input the journal you will execute default logic or you can execute journal.lgx logic.
    In any of these module if you place currency translation you will have your figures automat converted.
    Regards
    Sorin Radulescu
    Edited by: Sorin Radulescu on Dec 2, 2009 3:35 PM

  • Dreamweaver cc html entity conversion problem in mac -NO utf-8 related answer please

    I probably am fighting against a bug existing in DW for a while, and i'm really on the edge of bursting out! 
    Here are the specifications:
    Dreamweaver CC from creative cloud (also tested w/ CS5.5 too) installed on mac, OS and DW user interfaces are english, and on mac turkish keyboard layout is also installed.
    I have been using DW for maybe 15 years, since it was macromedia.. But was always on windows. This is the first time I use it on mac. Here is my problem step by step:
    1- Dreamweaver > Pereferences > New Document > Default Encoding: Western (ISO Latin 1) (NOT UTF-8 PLEASE, IT KEEPS THE CHARS UNCHANGED, ISO LATIN1 IS IMPORTANT)
    2- Go to Design View,
    3- There are 6 special characters in Turkish (times 2 for the caps versions of course), type:
    ĞÜŞİÖÇğüşıöç
    4- Go back to code view, what i should have seen was:
    &#286;&Uuml;&#350;&#304;&Ouml;&Ccedil;&#287;&uuml;&#351;&#305;&ouml;&ccedil;
    But I see:
    Ğ&Uuml;Şİ&Ouml;&Ccedil;ğ&uuml;şı&ouml;&ccedil;
    There are 3 chars (and capital versions) NOT converted to html entity at all. Which were: ĞŞİğşı
    But I should have seen them as: &#286;&#350;&#304;&#287;&#351;&#305;
    Any help would be appreciated, I do not want to leave my old friend DW just because of a weird conversion problem...

    Ok, when you look at the code view, what do you see exactly?
    do you see unconverted
    ĞÜŞİÖÇğüşıöç
    or converted
    &#286;&Uuml;&#350;&#304;&Ouml;&Ccedil;&#287;&uuml;&#351;&#305;&ouml;&ccedil;
    Here is one of my reasons:
    I sometimes create newsletters in turkish for my customers, and the html files i prepare are sent to customers attached as inline through various versions of outlook or thunderbird, or through i completely different email sender company (none is sent by me, i only create the html file). And most of the time the headers and some coding are cut off from the code when used to send as newsletter, and i have no control at all on it. so i have to create absolute correct viewed/rendered html files since i have no control at all on which sending method will be used or which os or browser or mail system will be used to open it...

  • HDV to DVD conversion

    I've read a great deal of discusson on this site regarding HDV to DVD conversion and how to get the best possible results. There seem to be about a half a dozen marginal solutions but in my opinion and experience no real perfect definitive solution.
    This is in the way of a suggestion/plea/request to Apple, to those who run this forum, and to those experts there who deal with Final Cut pro and HDV editing: Could someone please create a definitive expert professional manual/post/procedure on how to do this very straightforward conversion from HDV to DVD with the BEST possible industry quality results.
    DF
    g5 tower   Mac OS X (10.4.6)  

    Seriously, open the phonebook, start asking who can take a HDV master on miniDV tape, and hand you back a DVD in a day or two, it may be cheaper than buying pro encoder software, and your time to learn how to use it effectively. You should have budget for this, promos / trailer work should be included. Your time costs money. It will also put you in a better position to know what to ask for when the project is finished.
    Using the camera down convert is good enough. DVD from DV is fast to make. If you are just previewing it, S-VHS is also good enough, and very quick and simple to produce - don't rule out lower tech, or lower quality options, they will still tell the same story.
    In answer to your question, (do you really want to know ?), the colour space of the NTSC DV in camera down conversion is 4:1:1, the colour space of MPEG video is 4:2:0 (search for those terms, until you hit a page with diagrams of boxes), the differences in these structures results in a worst of both colour encoding - if you are shooting PAL, then the story is different, as PAL DV is also 4:2:0, and probably not significantly different from the DV50 method, once its on DVD.
    DV50 is 4:2:2, HDV is 4:2:0, but at a higher resolution. When downscaled, I estimate SD from HDV is around 4:2:2 or maybe even 4:4:4, by going via DV50 to DVD you deliver the most DVD's can represent, rather than with NTSC DV where you deliver half the colour space DVDs can show. BUT the in camera down convert is REALTIME, consider the benefit of that before taking the slower route.
    Is the DV50 the best SD down convert ? I don't know. It certainly looks very clear, shows no, or little signs of the DV50 codec adding artefacts over the original HDV footage, and produces more quality than the MPEG encoder can represent once on DVD, or at least, the MPEG encoder I have access to. I cannot say the same of the in camera convert. I also played with uncompressed codecs, and the None compression codec, they require huge amounts of disk space, and didn't look better than the DV50 method. However, I didn't test them with your footage.
    I suggest a 1 minute 'bake off' between the methods, using your own footage, to see just how much quality you are willing to accept. You may find the in-camera is good enough, and a darn sight easier and faster.
    Hope this helps - search around more, trawl through some older threads, or, just pick up the phone and call a post house to make it all go away! By the time you have figured out what works best for you, they would have finished and be on to the next job.

  • My daughter has just bought me an iPad 2 from Dubai and set it all up for me but unfortunately the iMessage function doesn't seem to work. We keep getting messages,when trying to activate it, that there is a network connection problem - help!

    My daughter has just bought me an iPad 2 from Dubai and set it all up for me but unfortunately the iMessage function doesn't seem to work. We keep getting messages,when trying to activate it, that there is a network connection problem - help!

    Thank you both for your responses but my daughter was reassured by the salesman in the iStyle store (official Apple store in the UAE) that iMessages would work but conceded that FaceTime wouldn't. My iTunes account is registered in the uk and my daughter's iPhone has iMessages even though she bought it (and uses it) in Dubai. Can anyone else throw any light on this?

  • I couldn't log into my apple account on my iPad, then i couldn't unlock it resulting in it being disabled, however it's the same as my iPhones password, I then called apple, i was hung up on twice and they said it will cost £70 to fix THEIR problem, help?

    I couldn't log into my apple account on my iPad, then i couldn't unlock it resulting in it being disabled, however it's the same as my iPhones password, I then called apple, i was hung up on twice and they said it will cost £70 to fix THEIR problem, help?

    If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
    If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
    You may have to force iPad/iPod into Recovery Mode
    http://support.apple.com/kb/ht4097

  • IPad syncing problem - HELP!

    iPad sync problem - HELP!  I keep getting this message "...cannot be synced because there is not enough free space to hold all of the items in the iTunes library (additional ...space needed)"  and yet I seem to have plenty of space on the iPad.  This just started today.  I even tried deleting some things to make even more room, but it didn't help.  Any ideas??? 
    I was thinking of restoring, but I've never done it...  should I? 
    thank you!

    Hello florafromnv,
    Welcome to Apple Support Communities.
    The following article addresses how to resolve the issues related to this message:
    iOS: "Not enough free space" alert when trying to sync
    http://support.apple.com/kb/TS1503
    Regards,
    Jeff D.

  • Conversion problem in PURCHASE ORDER

    Hi all,
       wrong conversion was done in Quantities/Weights tab of item overview during creation of Purchase Order,instead of putting order unit  " 1 tonne  = 1000kg" it was wrongly fix as "5 tonne = 4536kg",  the order has been receive and issue , but during stock taking this conversion problem is giving wrong Quantity for the material in MB5B . Pls what can i do to resolve this.

    Hi
    If stock exists  then kindly do the reverse process as below
    1.Cancel material docuemt---MBST (Material document no and fiscial year)
    2.Delete the P.O line items --Me22n
    3.Enter the fresh line items in the same P.O
    If partial stock Exists then do the Physical inventory process to adjust the Stock
    Regards
    Damu

  • MOVED: KT333 Ultra; fuzzy logic, 1.6xp overclocking problem help !!!!!

    This topic has been moved to Overclockers & Modding Corner.
    KT333 Ultra; fuzzy logic, 1.6xp overclocking problem help !!!!!

    Not that I am an expert o/c but here are some thoughts on the matter.
    My comments are based on my experiences of the KT3 Ultra2 which is basically the same as the Ultra version.
    This mobo does not have the ability to lock the PCI/AGP bus freely from the FSB. However, it does have dividers. At 133 a 1/4 divider kicks in. Above 152FSB the 1/5 divider works, so that at 166 the PCI & AGP buses will be back in sync. If you are o/c your cpu, don't go from 133 to 145, etc since you will be running the PCI/AGP buses further out of whack. Just go to either the mid 150's or to 166 in one jump. The other problem / issue relates to your cpu. From what you say you have one of the old Palominos which are not great o/c's. I would personally o/c your cpu from the BIOS rather than 'Fluffy Logic' which I would tend to stay away from. 
    With a 166FSB cpu a very stable o/c would be 175-177 beyond 180 gets decidedly tricky.
    Hope this helps

Maybe you are looking for

  • Problem with backspace on Iphone 4.

    I have an Iphone 4 and I can't insert a word without deleting the entire sentence.

  • Contacts Sync with Outlook - Missing Indexes

    I wonder if anybody can help as I've run out of ideas. In the last week or so, my Blackberry (Curve 9300) is not syncing properly with my Outlook (2007) contacts. All records go across if I look in the database, and yet an undetermined number are not

  • Dashboard Translate Program, How do I get the translation to the clipboard

    If I highlight my translation, I can't put it in the clipboard because the Dashboard disappears when I click Edit in order to copy. Is there a way to get the Translate program on to my desktop so that I may copy results into the clipboard?

  • Opening pdf files in 10.8

    I can't open pdf files in Mountain lion. I followed all the old posts but none helped and most were a year old. I downloaded the lated reader from Adobe tonight and that didn't help either. No other issues with 10.8, I really like this new OS, but th

  • Line break for code postings

    Hi there, normally the forum software does insert automatically a line break for text posting. If i write a code posting with the {code} parameter, it does not do like that. Sometimes the posts runs out of the displayed field. It is a bug or wanted ?