HDV and DV versions from a PAL sequence based on HDV source material

Hi,
what is the best way to create DV ( for PAL) and HDV versions of the same source material ?
I have the source material in HDV and started by putting the clips into a PAL sequence. I did the trimming and fine-tuning in the PAL sequence and thought that I can just copy the final clips into a HDV 1080i sequence to get the HDV version .... Obviously this keeps the PAL resolution and consequently displays the picture scaled down in the larger HDV picture...
Any hints ?
Thanks,
Michael

Do it the other way around. Edit in HDV and pout that into a PAL sequence, or simply export a PAL version when you're finished editing.

Similar Messages

Can't make Tablet and Phone versions from Desktop

Hi there,
I made my site from Desktop layout and then clicked Tablet and Phone versions on menu bar, but nothing happened. Did I do or miss something before clicking Tablet or Phone button? First, please see the screenshot below.
[Desktop version]
At this point, I clicked Tablet button, but nothing happened as follows. I can't see anything. Why the Tablet layout doesn't import or take any content from Desktop layout? Of course, I chose the default option when I added Tablet layout.
[Tablet version]
Thanks for your help in advance.

Hi Parikshit,
Thank you so much for your quick reply. I thought clicking those buttons took all the content from "Desktop" layout. I'm shaming myself! :-) I figured it out and finally made "Phone" version.
Regards,
Sangdae

Best color workflow with hdv source material?

Hi,
I am wondering about the best workflow for working with hdv material in color?
My first Color experience, I sent a AIC timeline (hdv source) to color, made my corrections, clicked NO when sending back to fcp when asked if I wanted the rendered timeline to be conformed to color render settings (apple pro-res) as I wanted the same sequence settings back in fcp.
I then tried to off/online back to my source hdv capture files, and therein arose the problems. Because color had renamed the files, the new names came up in the re-connect media window, not the hdv source. When ignoring these and locating the hdv source, the corrections were not attached.
After advice, tried onlining the original, locked edit, opening in color - files came up red (offline?), but could not apply the grades from the previous project anyway, as the whole program crashed before I could do anything?
Thoughts on workflow, theories on what I may have done wrong greatly appreciated.
Lastly, a lot of noise appeared in some clips I adjusted in color, which did not occur when making similar corrections to the same clips using the 3-way color corrector within fcp itself.
How come?
Thanks for listening,
-Tom

Hi Tom, agree 100% with all of JP OWENS comments on this thread. This is very good advice.
Myself, coming from the dark side of a SONY HDV (HVR-Z1P) and DUMPING the SONY for a Panasonic DVCPROHD HVX-200 iFRAME HD format 66mbs and 110Mbs DVCPROHD 4:2:2 CODEC was primarily because when using COLOR on the HDV it was as dreadful as JP OWENS says it is.
As as has been mentioned in this thread, for working with HDV and trying to perform any reasonable grading using color.app you would indeed move it all to  PRORES422 by either:
• ingesting it as proposed from the source as APPLE PRORES 422 or
• ingesting and then BATCH CONVERTING in FCP (or go via a COMPRESSOR.app DROPLET - a favourite of mine) and THEN importing that into FCP.
It gives you these workflow advantages (again pointed out by Mr Owens):
• iFRAME format editing in FCP is "faster" (not GoPs to play with in 25Mbs MPEG2 HDV)) and
• workflow transcoding is faster. (many threads in these forums concerning exporting from an HDV timeline).
However to roughly quote Stu Maschwitz (his DV REBEL book) "+..converting DV to a near loss-less codec is a bit like carrying a golf ball around in a streamer trunk+".. applying this to HDV as well simply meaning that there is also NOT much colour information to work with in grading.correction applications like color.app.
Thus there is NO colour benefit from working in prores 422 from HDV source.
IN short, work in PRORES422 from your HDV source and your workflow will improve and efficiencies will be seen.
hth
w

Mixing HDV source material in FCP6

I currently shoot Canon HV30 HD minidv. Works great. I want to add another camera and have been considering a Canon HF M31 Flash Drive Camera. Can I combine the 2 formats in the same timeline and with what project setting?

Thanks for the ProRes info. As to converting the hdv material, should I capture native HD in FCP then export all material as ProRes? Seems kind of convoluted. Or are you suggesting opening a new project with ProRes settings and the import from camera and let FCP convert?
Really, am I trying to mix apples and oranges, or can this mixing of formats work for smooth editing and exporting of an HD project?

Extract parent and child data from an XML sequence?

I'm very new to XML, so please excuse me if I use incorrect terminology here. I've been given a schema definition (.xsd), and several sample xml files from which I need to extract data and insert it into relational tables. I've made some progress in that I've been able to hack enough to modify and register the schema and get the XML into the database both through the registered schema and into a separate table with an XMLType column. I've also been able to use the isSchemaValid function to validate the XML against the schema definition, and I've been able to extract some of the simple data elements via the extractValue function. My problem is with extracting some of the nested data - that is, extracting parent node elements and child node elements together where there is more than one value in the child node. BTW. I'm on Oracle 10gR2.
Following are the .xsd and and sample XML. Specifically, I need to select the NPI value from the PROVIDER node, and associate it with each of the CODE values from the SPECIALTIES node (which is part of the PROVIDER node).
Here's the .xsd (sorry, it's very long). The only modifications I've made to the schema definition are to add the xdb namespace and the "xdb:defaultTable="HMOSCHEMA" snippet:
<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xdb="http://xmlns.oracle.com/xdb" version="1.0">
<xsd:element name="HMO" xdb:defaultTable="HMOSCHEMA">
<xsd:complexType>
<xsd:sequence>
<xsd:element ref="HMO_GENERAL_INFORMATION" />
<xsd:element ref="PROVIDERS" />
<xsd:element ref="FACILITIES" minOccurs="0"
maxOccurs="1" />
</xsd:sequence>
<xsd:attribute name="DATE" type="xsd:string" />
</xsd:complexType>
</xsd:element>
<xsd:element name="HMO_GENERAL_INFORMATION">
<xsd:complexType>
<xsd:sequence>
<xsd:element ref="MCO_ID_LIST" minOccurs="1" maxOccurs="1" />
<xsd:element ref="HMO_WEBSITE_ADDRESS" minOccurs="1"
maxOccurs="1" />
<xsd:element ref="HMO_SPECIAL_SERVICES" minOccurs="0"
maxOccurs="1" />
<xsd:element ref="HMO_DAILY_CONTACT_EMAIL_ADDRESS"
minOccurs="1" maxOccurs="1" />
<xsd:element ref="HMO_MONTHLY_CONTACT_EMAIL_ADDRESS"
minOccurs="1" maxOccurs="1" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="PROVIDERS">
<xsd:complexType>
<xsd:sequence>
<xsd:element maxOccurs="unbounded" ref="PROVIDER" />
</xsd:sequence>
<xsd:attribute name="RECORDS" type="xsd:string" />
</xsd:complexType>
</xsd:element>
<xsd:element name="PROVIDER">
<xsd:complexType>
<xsd:sequence minOccurs="1" maxOccurs="unbounded">
<xsd:element ref="NPI" minOccurs="1" maxOccurs="1" />
<xsd:element ref="FIRST_NAME" minOccurs="1"
maxOccurs="1" />
<xsd:element ref="LAST_NAME" minOccurs="1"
maxOccurs="1" />
<xsd:element ref="MIDDLE_INITIAL" minOccurs="0"
maxOccurs="1" />
<xsd:element ref="GENDER" minOccurs="1" maxOccurs="1" />
<xsd:element ref="LINE_1_ADDRESS" minOccurs="1"
maxOccurs="1" />
<xsd:element ref="LINE_2_ADDRESS" minOccurs="0"
maxOccurs="1" />
<xsd:element ref="CITY" minOccurs="1" maxOccurs="1" />
<xsd:element ref="STATE" minOccurs="1" maxOccurs="1" />
<xsd:element ref="ZIP" minOccurs="1" maxOccurs="1" />
<xsd:element ref="COUNTY" minOccurs="0" maxOccurs="1" />
<xsd:element ref="PHONE_NUMBER" minOccurs="1"
maxOccurs="1" />
<xsd:element ref="CLINIC_NAME" minOccurs="0"
maxOccurs="1" />
<xsd:element ref="CLINIC_TYPE" minOccurs="0"
maxOccurs="1" />
<xsd:element ref="CLINIC_NPI" minOccurs="0"
maxOccurs="1" />
<xsd:element ref="PROVIDER_OFFICE_HOURS_TENTHS"
minOccurs="0" maxOccurs="1" />
<xsd:element ref="MAXIMUM_PATIENTS" minOccurs="0"
maxOccurs="1" />
<xsd:element ref="ACCEPT_NEW_PATIENT" minOccurs="0"
maxOccurs="1" />
<xsd:element ref="PRIMARY_CARE_INDICATOR" minOccurs="0"
maxOccurs="1" />
<xsd:element ref="FOREIGN_LANGUAGES" minOccurs="0"
maxOccurs="1" />
<xsd:element ref="SPECIALTIES" minOccurs="1"
maxOccurs="1" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="SPECIALTIES">
<xsd:complexType>
<xsd:sequence>
<xsd:element maxOccurs="unbounded" name="CODE"
minOccurs="1">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:pattern value="[0-9]{3}" />
<xsd:whiteSpace value="collapse" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="FACILITIES">
<xsd:complexType>
<xsd:sequence>
<xsd:element maxOccurs="unbounded" ref="FACILITY_NUM"
minOccurs="0" />
</xsd:sequence>
<xsd:attribute name="RECORDS" type="xsd:string" />
</xsd:complexType>
</xsd:element>
<xsd:element name="FOREIGN_LANGUAGES">
<xsd:complexType>
<xsd:sequence>
<xsd:element maxOccurs="unbounded" name="CODE"
minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:pattern value="[A-Z]{3}" />
<xsd:pattern value="[a-z]{3}" />
<xsd:pattern value="" />
<xsd:whiteSpace value="collapse" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="HMO_SPECIAL_SERVICES">
<xsd:complexType>
<xsd:sequence>
<xsd:element maxOccurs="unbounded" name="CODE"
minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:pattern value="[0-9]{2}" />
<xsd:pattern value="" />
<xsd:whiteSpace value="collapse" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="MCO_ID_LIST">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="MCO_ID" minOccurs="1" maxOccurs="unbounded">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:pattern value="[0-9]{1}" />
<xsd:pattern value="[0-9]{2}" />
<xsd:pattern value="[0-9]{3}" />
<xsd:pattern value="[0-9]{4}" />
<xsd:pattern value="[0-9]{5}" />
<xsd:pattern value="[0-9]{6}" />
<xsd:pattern value="[0-9]{7}" />
<xsd:pattern value="[0-9]{8}" />
<xsd:whiteSpace value="collapse" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="HMO_WEBSITE_ADDRESS">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="1" />
<xsd:maxLength value="100" />
<xsd:whiteSpace value="collapse" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="HMO_DAILY_CONTACT_EMAIL_ADDRESS">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="1" />
<xsd:maxLength value="50" />
<xsd:whiteSpace value="collapse" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="HMO_MONTHLY_CONTACT_EMAIL_ADDRESS">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="1" />
<xsd:maxLength value="50" />
<xsd:whiteSpace value="collapse" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="NPI">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:pattern value="[0-9]{1}" />
<xsd:pattern value="[0-9]{2}" />
<xsd:pattern value="[0-9]{3}" />
<xsd:pattern value="[0-9]{4}" />
<xsd:pattern value="[0-9]{5}" />
<xsd:pattern value="[0-9]{6}" />
<xsd:pattern value="[0-9]{7}" />
<xsd:pattern value="[0-9]{8}" />
<xsd:pattern value="[0-9]{9}" />
<xsd:pattern value="[0-9]{10}" />
<xsd:whiteSpace value="collapse" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="FIRST_NAME">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="1" />
<xsd:whiteSpace value="collapse" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="LAST_NAME">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="1" />
<xsd:whiteSpace value="collapse" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="MIDDLE_INITIAL">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="0" />
<xsd:maxLength value="1" />
<xsd:whiteSpace value="collapse" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="GENDER">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="0" />
<xsd:maxLength value="1" />
<xsd:whiteSpace value="collapse" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="LINE_1_ADDRESS">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="1" />
<xsd:whiteSpace value="collapse" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="LINE_2_ADDRESS">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="0" />
<xsd:whiteSpace value="collapse" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="CITY">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="1" />
<xsd:whiteSpace value="collapse" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="STATE">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:pattern value="[a-zA-Z][a-zA-Z]" />
<xsd:whiteSpace value="collapse" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="ZIP">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:pattern value="[0-9]{5}" />
<xsd:pattern value="[0-9]{9}" />
<xsd:whiteSpace value="collapse" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="COUNTY">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:pattern value="[0-9]{1}" />
<xsd:pattern value="[0-9]{2}" />
<xsd:pattern value="[0-9]{3}" />
<xsd:pattern value="" />
<xsd:whiteSpace value="collapse" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="PHONE_NUMBER">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:pattern value="[0-9]{10}" />
<xsd:whiteSpace value="collapse" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="CLINIC_NAME">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="0" />
<xsd:pattern value="" />
<xsd:whiteSpace value="collapse" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="CLINIC_TYPE">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="0" />
<xsd:pattern value="" />
<xsd:whiteSpace value="collapse" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="CLINIC_NPI">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:pattern value="[0-9]{1}" />
<xsd:pattern value="[0-9]{2}" />
<xsd:pattern value="[0-9]{3}" />
<xsd:pattern value="[0-9]{4}" />
<xsd:pattern value="[0-9]{5}" />
<xsd:pattern value="[0-9]{6}" />
<xsd:pattern value="[0-9]{7}" />
<xsd:pattern value="[0-9]{8}" />
<xsd:pattern value="[0-9]{9}" />
<xsd:pattern value="[0-9]{10}" />
<xsd:pattern value="" />
<xsd:whiteSpace value="collapse"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="PROVIDER_OFFICE_HOURS_TENTHS">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:pattern value="[0-9]{1}" />
<xsd:pattern value="[0-9]{2}" />
<xsd:pattern value="" />
<xsd:whiteSpace value="collapse" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="MAXIMUM_PATIENTS">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:pattern value="[0-9]{1}" />
<xsd:pattern value="[0-9]{2}" />
<xsd:pattern value="[0-9]{3}" />
<xsd:pattern value="[0-9]{4}" />
<xsd:pattern value="" />
<xsd:whiteSpace value="collapse" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="ACCEPT_NEW_PATIENT">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:pattern value="[A-Z]{1}" />
<xsd:whiteSpace value="collapse" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="PRIMARY_CARE_INDICATOR">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:pattern value="[A-Z]{1}" />
<xsd:whiteSpace value="collapse" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="FACILITY_NUM">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:pattern value="[0-9]{1}" />
<xsd:pattern value="[0-9]{2}" />
<xsd:pattern value="[0-9]{3}" />
<xsd:pattern value="[0-9]{4}" />
<xsd:pattern value="[0-9]{5}" />
<xsd:pattern value="[0-9]{6}" />
<xsd:pattern value="[0-9]{7}" />
<xsd:pattern value="[0-9]{8}" />
<xsd:pattern value="[0-9]{9}" />
<xsd:pattern value="[0-9]{10}" />
<xsd:pattern value="" />
<xsd:whiteSpace value="collapse" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
</xsd:schema>
Here's a sample of the XML (significantly shortened, and names and IDs changed to protect the innocent). BTW, the XML validates cleanly against the schema definition:
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<HMO DATE="03/26/2010">
<HMO_GENERAL_INFORMATION>
<MCO_ID_LIST>
<MCO_ID>11111111</MCO_ID>
</MCO_ID_LIST>
<HMO_WEBSITE_ADDRESS>HTTP://WWW.SOMEHMONAME.COM</HMO_WEBSITE_ADDRESS>
<HMO_SPECIAL_SERVICES>
<CODE>00</CODE>
</HMO_SPECIAL_SERVICES>
<HMO_DAILY_CONTACT_EMAIL_ADDRESS>somename@someurl</HMO_DAILY_CONTACT_EMAIL_ADDRESS>
<HMO_MONTHLY_CONTACT_EMAIL_ADDRESS>somename@someurl</HMO_MONTHLY_CONTACT_EMAIL_ADDRESS>
</HMO_GENERAL_INFORMATION>
<PROVIDERS RECORDS="1011">
<PROVIDER>
<NPI>1111111111</NPI>
<FIRST_NAME>JOHN</FIRST_NAME>
<LAST_NAME>DOE</LAST_NAME>
<MIDDLE_INITIAL>A</MIDDLE_INITIAL>
<GENDER>M</GENDER>
<LINE_1_ADDRESS>1111 Some Rd</LINE_1_ADDRESS>
<LINE_2_ADDRESS> </LINE_2_ADDRESS>
<CITY>NOWHERE</CITY>
<STATE>YN</STATE>
<ZIP>12345</ZIP>
<COUNTY>13</COUNTY>
<PHONE_NUMBER>1111111111</PHONE_NUMBER>
<CLINIC_NAME>SOME CLINIC - CORPORATE OFFICE</CLINIC_NAME>
<CLINIC_NPI/>
<ACCEPT_NEW_PATIENT>Y</ACCEPT_NEW_PATIENT>
<PRIMARY_CARE_INDICATOR>N</PRIMARY_CARE_INDICATOR>
<FOREIGN_LANGUAGES>
<CODE> </CODE>
</FOREIGN_LANGUAGES>
<SPECIALTIES>
<CODE>170</CODE>
</SPECIALTIES>
</PROVIDER>
<PROVIDER>
<NPI>2222222222</NPI>
<FIRST_NAME>JANE</FIRST_NAME>
<LAST_NAME>DOE</LAST_NAME>
<MIDDLE_INITIAL>J</MIDDLE_INITIAL>
<GENDER>F</GENDER>
<LINE_1_ADDRESS>2222 SOMEOTHER ST</LINE_1_ADDRESS>
<LINE_2_ADDRESS> </LINE_2_ADDRESS>
<CITY>MYTOWN</CITY>
<STATE>YN</STATE>
<ZIP>12345</ZIP>
<COUNTY>13</COUNTY>
<PHONE_NUMBER>2222222222</PHONE_NUMBER>
<CLINIC_NAME>SOME CLINIC - MYTOWN</CLINIC_NAME>
<CLINIC_NPI/>
<ACCEPT_NEW_PATIENT>Y</ACCEPT_NEW_PATIENT>
<PRIMARY_CARE_INDICATOR>N</PRIMARY_CARE_INDICATOR>
<FOREIGN_LANGUAGES>
<CODE> </CODE>
</FOREIGN_LANGUAGES>
<SPECIALTIES>
<CODE>322</CODE>
<CODE>329</CODE>
</SPECIALTIES>
</PROVIDER>
</PROVIDERS>
<FACILITIES RECORDS="2">
<FACILITY_NUM>1000000001</FACILITY_NUM>
<FACILITY_NUM>2000000002</FACILITY_NUM>
</FACILITIES>
</HMO>
As you can see, the SPECIALTIES node can contain more than one CODE value, si I can't use extractValue to retrieve them. Again, I need to extract the NPI value from the PROVIIDER node, and associate it with each of the CODE values from the SPECIALTIES node. So, what I would need to extract from this sample XML would be:
NPI CODE
1111111111 170
2222222222 322
2222222222 329
This seems like it should be a pretty routine requirement, but I've tried everything I can think of (that is, everything I've learned to this point), and have not yet found a way............
Ideally, the solution to extracting this data would utilize SQL (not PL/SQL, or Java, or XSL, etc) with XML extraction functions (e.g. extract, extractValue, XMLSequence, XMLTable, etc).
Can anyone provide me with an example of how that iterative specialy code data could be extracted? Do I need to modify the .xsd to facilitate this extraction (so that registration of the schema results in other objects in the database)?
Any suggestions or examples would be greatly appreciated.
Thanks in advance, Dan
P.S. - I hope the XML displays OK when I post this question!

Hi,
Thanks for your detailed sample, it's very helpful.
This seems like it should be a pretty routine requirementIndeed, that's a classic (once you've got the method).
So, here's how you can do it :
SELECT x1.npi, x2.code
FROM t,
     XMLTable(
      '/HMO/PROVIDERS/PROVIDER'
      passing t.doc
      columns
        npi number path 'NPI',
        specialties xmltype path 'SPECIALTIES'
     ) x1,
     XMLTable(
      'SPECIALTIES/CODE'
      passing x1.specialties
      columns
        code number path '.'
     ) x2
;Assuming the XML is stored in column T.DOC.
As you see, for each NPI, the trick is to pass the entire SPECIALTIES node (kind of a join) to another nested XMLTable so that each CODE could be extracted as well.
There's another method using only one XMLTable and a little more complex XQuery. I'll try to post it soon.
HTH.
Edit : 2nd method
SELECT x.*
FROM t,
     XMLTable(
      'for $i in /HMO/PROVIDERS/PROVIDER/SPECIALTIES/CODE
       return element e
        attribute npi { $i/../../NPI },
        $i/text()
      passing t.doc
      columns
        npi number path '@npi',
        code number path '.'
     ) x
;Edited by: odie_63 on 27 mai 2010 18:43

Oracle B2B not picking up Document type and document version from JMS msg

Hi,
We have developed guideline and schema for a custom positional flat file using Oracle B2B Document Editor. We were able to creat and deploy the agreement. But when we drop a message on a Queue being listened by Oracle B2B. The document type and version values were empty. We got the following error,
Error Code B2B-50083
Error Description Machine Info: (xxxxx) Description: Document protocol identification error.
Error Level ERROR_LEVEL_COLLABORATION
Error Severity ERROR
Error Text Document protocol identification error.
This is our Java code for testing that drops the message, and I can see the JMS header with these values.
message.setText(messageText);
message.setStringProperty("FROM_PARTY", "CT-Sender");
//message.setStringProperty("FROM_PARTY", "RemoteTP");
message.setStringProperty("TO_PARTY", "MyCompany");
message.setStringProperty("DOCTYPE_NAMEe", "CT");
message.setStringProperty("DOCTYPE_REVISION", "CT-AES");
We were able to test a 850 document successful through different document and agreement ....
Thanks
John

We have uploaded the ecs and xsd files. Are they the parser files you are mentioning? The following is the information we have for the transaction. I am just surprised whty the Document Type and others are empty.
Thanks
John
Id 0A9F196E132459F393C00000184B4897
Message Id 0A9F196E132459F392300000184B4893
Refer To Message Refer To Message
Sender Type Name
Sender Value CT-Sender
Receiver Type Name
Receiver Value MyCompany
Sender CT-Sender
Receiver MyCompany
Agreement Id
Agreement
Document Type
Document Protocol
Document Version
Message Type REQ
Direction INBOUND
State MSG_ERROR
Acknowledgement Mode NONE
Response Mode ASYNC
Send Time Stamp 09/07/2011 04:40 PM
Receive Time Stamp 09/07/2011 04:40 PM
Document Retry Interval(Channel) 0
Document Remaining Retry(Channel) 0
Document Retry Interval(Agreement)

I want to swap the language of my CS 6 Web and Design version from English to German.

How does this work, from where can I get the language files?

Change product platform or language
You can swap languages/platforms for a latest version product if you follow the instructions at the following link:
http://helpx.adobe.com/x-productkb/policy-pricing/order-product-platform-language-swap.htm l

Final Cut Pro 7 - Letterbox and stretched picture from ****! HELP!

I've edited and saved hundreds of projects without a Letterbox and stretched out picture. All of a sudden I edited and save this project and I can get rid of the letterbox. PLEASE HELP! It's awful!

You are editing HD video shot in HDV anamorphic 16:9 on a Standard Definition 4:3 timeline.
Is this your intention? FCP is scaling the video to fit in the 4:3 aspect ratio - hence the letterbox.
If this is not what you want, you need to create a new (empty) sequence. Go to the menu File > New > Sequence. Drag a source clip of your footage to the new sequence, and you should be prompted by FCP to match the sequence settings with the source footage. Click yes and you should now have a sequence that matches your source footage and the letterboxing should be gone.
To save your existing work in the letterboxed sequence and move it to the new (correct) sequence, do the following:
Remove the clip you used to set the sequence settings on the new sequence so that it is empty.
Return to your incorrect sequence and click anywhere. Type Command + A to select all the clips. Type Command + C to copy them.
Switch to the new, empty sequence and click anywhere in it. Type Command + V to paste all the clips to the new (correct) sequence.
If the video does not display correctly in the new sequence, click anywhere on the timeline of the new sequence. Once you have done that, type Command + A to select all the clips.
Control-click on anyone of the selected video clips, and from the drop down menu choose "Remove Attributes"
When the Remove Attributes pane opens, check the boxes for Basic Motion and Distort (if they are not grayed out) and then click OK.
You should be good to go.
MtD

FireFox 4 and earlier versions will not install on my Windows Vista, 64 bit computer. The file downloads and the file extracts but I never make it to the installation wizard.

I have tried to download FireFox 4 and earlier versions from several different website, thinking the files might have gotten corrupted, and each time I download the file the exact same thing happens, the file downloads and the file gets extracted but when the extraction completes the small window dissappears and nothing else happens.
My machine is a Windows Vista 64 bit system and I've tried downloading the file with my 32 and 64 bit Internet Explorer but nothing seems to work. Can someone help me please because I would love to be able to completely delete I.E.

Hi, thanks for your Flash file info. Well you must have been doing it right, since all of your Flash files for IE and FF are correct.
The SWF plugin for FF and the SWO for IE are also correct.
You shouldn't be having any problems with Flash Player.
What you can try is to turn off the hardware acceleration feature. Go to any video, like youtube and right click on the video and click on Settings. Display Settings is where you will UN check hardware acceleration.
See if that helps. Let me know.
Thanks,
eidnolb

Creating a MOVIL and TABLET version

Hi everybody, I am trying to create a movil and tablet version from my muse site,
I have +tablet and +movil, I click on that buttons, then I click on copy from my desktop muse site then click in the first two boxes
Nothing happens, I get just a blank pages in both movil and tablet
This happens in CC-7.4 and the new version CC-2014.0
What am I doing wrong?, why I am not seeing my movil site design?, Any help will be appreciated
Regards

Muse creates a site plan for the phone layout. Page names, the site's structure, and attributes of the master page are copied over. The actual page content is not added to the phone layout page thumbnail. That is intentional, to allow you to copy just the content you actually want into each page of a mobile layout. As you bring the content you want to add into each new page, you can resize it to fit within the smaller dimensions of the mobile screen.
Read more about adding a Phone layout to a Muse site for more details on this
http://helpx.adobe.com/muse/using/creating-website-mobile-devices.html
Please let me know if I am missing something here.
Thanks,
Sanjit

How do I import edited images and NOT masters from iphoto

I'm trialling aperture with a view to migrating from iphoto. I having difficulty importing images from iphoto in so much as whatever options I use to import aperture brings both the master photo and edited version from iphoto. I'd prefer to import only masters where no edited version exists AND where a photo has been edited within iphoto just the edited version (and all metadata, faces, keywords, places etc).
Is this possible?

Welcome to the Apple Discussions.
Then you don't want to import your iPhoto Library, what you want to do is export the files from iPhoto (File -> Original *Kind: Current*) to folders on the desktop and then import from there.
Note that using the Current setting will miss a lot of metadata. If you want that you'll need to set the *Kind to Jpeg* and check the boxes at "titles and descriptions" and "Places information". However, if you're unedited images are Raw you won’t get the masters, obviously.
Regards
TD

Thanks this was very useful.. I have a brand new iphone 4s unlocked version from singapore and I am having the same problem constant network fluctuations, no service, call failed, invalid sim, sim failure, bars fluctuating from 5 - 3 - 2 - 1, no signal/ba

I have a brand new iphone 4s unlocked version from singapore and I am experiencing constant network fluctuations on my iphone , no service, call failed, invalid sim, sim failure, bars fluctuating from 5 - 3 - 2 - 1, no signal/bars searching etc... Ifeel miserable after trying out all the options changed multiple sims, tried multiple carriers, restored the phone back and have set-up as new device but the problem does not get solved... its is so frustrating that after investing on a world's most expensive phone you cannot enjoy the calling features which the phone offers which is the main thing you own the phone for.. Rest of the things are working.. The funniest part I am not able to make calls or receive calls but can access the internet.. I have tried every possible thing and really very frustrated with this iphone of mine...I hope the problem gets solved.. would anyone have any solutions to this problem.. Does it mean one should never update software as I hear that after updating to IOS.5.1 the problem has started coming and same has been with there.... Apple says its a hardware failure which is very difficult to digest as sometimes I get 5 bars and able to make and receive calls but 95% of the time I am unable to. If anyone has any solution I will be very happy if he or share can share the same. Many thanks. its so disgusting to experience this on top of this apple does not support global warranty for the phone as you need to go to the country from where you bought the phone for replacement.. Truly sad state of affairs.. very very very dissappointing.

Have a look at this it might help
http://support.apple.com/kb/TS4148

After upgrading to Yosemite I have lost iPhoto. It has a cross through it in Finder, but I clicked on it and I was directed to download the latest version from the App store, but it is not available in the Australian store. Can anyone help?

After upgrading to Yosemite I have lost iPhoto. It has a cross through it in Finder, but I clicked on it and I was directed to download the latest version from the App store, but it is not available in the Australian store. Can anyone please help? I am not an advanced user and I would like my photos back, having had no idea I would lose iPhoto in the upgrade!

Thanks petermac87...but for some reason, the only purchases showing are OS. So assuming iPhoto is in Mountain Lion, I was hoping to look under Hidden Items there as you suggested, but there is no option for that. Only option is to download Mountain Lion again, not iPhoto specifically. Any ideas welcome!

How to prevent iTunes for Windows from "Updating iTunes Library"? (Library is on a NAS and managed by iTunes for Mac. Now getting update wars between Mac and Windows versions of the player.

How to prevent iTunes for Windows from "Updating iTunes Library"?
My library is on a NAS and managed by iTunes on a Mac. I can connect from wife's Windows laptop using iTunes for Windows but every time I do, it Updates iTunes Library. Next time I log in from my Mac it Updates iTunes Library in return. It appears I'm experiencing "Update Wars" between the Mac and Windows versions of iTunes. I would like to allow my wife to stream iTunes songs to her new laptop but I don't want any updates from this source... prefer to manage the library from my Mac and not allow Windows to do any thing other than listen to existing playlists.
Thanks for any help/suggestions.

Connect the PC to the library on the NAS. Wait while "updated".
Under Edit > Preferences > Advanced make sure the media folder is correctly pointed at the media folder on the NAS. If not correct, close iTunes, wait a few moments, then open iTunes again.
Close iTunes on the PC. Do not open iTunes on the Mac.
Copy the library files, iTunes Library.itl, iTunes Library Extras.itdb, iTunes Library Genius.itdb, sentinel and the folder Album Artwork into an empty iTunes folder on the PC, for example C:\iTunes.
Click the icon to start iTunes and immediately press and hold down SHIFT. Keep holding until prompted to choose or create a library. Click choose and browse to the copied .itl file, e.g. C:\iTunes\iTunes Library.itl
The library should now work properly on the PC, however check the setting for the media folder. If needs be correct, close iTunes and reopen.
Open iTunes on the Mac. It will update again, but that should be last time.
tt2

I have installed 2010 microsoft office 2010 home and business version for my laptop,and i have installed lync 2013.Now i want create online lync meeting from outlook,but i am unable view that lync icon in outlook.Please give me the solution for this que

I have installed 2010 Microsoft office 2010 home and business version for my laptop,and I have installed lync 2013.Now i want create online lync meeting from outlook,but i am unable view that lync icon in outlook.Please give me the solution for this issue.
Regards
Raghavendar

Hi Raghavendar,
Generally, when you install Lync 2013 in the computer with Office 2010, a Lync Meeting Add-in will be installed and enabled in Outlook 2010. Please follow these steps to check it:
1. In Outlook, click the File tab, click Options, and then click
Add-Ins.
2. Please take one of the following actions:
If the add-in is in the Inactive Application Add-ins list, follow these steps:
a. In the Manage drop-down list at the bottom of the dialog box, click
COM Add-ins, and then click Go.
b. Click to select the check box next to the add-in, and then click OK.
The New Online Meeting button should now be available in
Calendar View, and the Online Meeting button should be available when you create a new calendar item.
If the add-in is in the Disabled Application add-ins list, follow these steps:
a. In the Manage drop-down list at the bottom of the dialog box, click
Disabled Items, and then click Go.
b. Select the add-in, and then click Enable.
c. Restart Outlook, and then verify that the add-in is displayed in the
Add-ins dialog box.
The New Online Meeting button should now be available in
Calendar View, and the Online Meeting button should now be available when you create a new calendar item.
3. In Event Viewer, view the Application log to see whether an error was logged for Outlook, for Lync 2013, the Lync Meeting Add-in for Microsoft Office 2013.
Thanks,
Winnie Liang
TechNet Community Support

HDV and DV versions from a PAL sequence based on HDV source material

Similar Messages

Maybe you are looking for