HDV export with minimum transcoding

Hi,
I wonder what format would use minimum effort on PPCS3 and minimum quality degradation of course. I would assume mpeg2, but to my knowledge mpeg2 encoding is different from hdv (mpeg2 transport stream)so transcoding takes place anyway?
I assume, also that export to camcorder tape would be the best way, but I couldn't get it to work. Nor I could find an option to export to disc in hdv format which is suppose to be an option too.
thanks

Thanks for the quick response! I will try that as well. It would normally not be an issue, I just had a client wanting to look at my work and had no time to make it into a DVD (or mpeg2)I threw the .mov onto a CF card and loaded it onto my PC Laptop(only laptop I have) to show the client. NO GO. it would not play! I was sweating bullets at this point.
Also, If I wanted to scale down the video for web, and have it look nice and keep the aspect ratio. What is the best Compressor settings? I could not find a web version that would keep the 16x9 aspect ratio. The original file is just over 1GB and 250 MB or so would suffice for output.
Thanks for all the help.
Ryan

Similar Messages

Final cut export with HDV

Hello I have one project with HDV sequences, Pal sequences and some Iphoto video exports.
I want do one master with best quality. We need do SD DVD at 16:9 format.
Wich is the best way?
Send to compressor doing DV compression?One uncompressed 10 bits?
Export with currents settings and do the compression with dvdstudio?
Thanks

Export with current settings. Open in compressor. Use DVD best quality 90 minutes. In the audio tab, set dialog normalization to-31. Burn in DVD Studio Pro or your program of choice. This would be a good basic starting point.
--Bob

Editing H.264, exporting with current settings results in transcode?

Hello, I just edited a H.264 (.mov) home video and exported it using "Current Settings". The original file size was 400 MB but the export resulted in a 4.5 GB file. FCP X obviously transcodes the original material. I've also tried exporting the same file using the "H.264" setting, the result then was a 300 Mb file. This corresponds to the cutting I've done but the export process still took a lot of time and CPU to finish which proves transcode taking place again. In the past I used Quicktime 7 Pro to cut and edit H.264, it never transcoded the files and the saving was quick an painless. Am I missing some settings here or is FCP X currently unable to edit H.264 and export it without transcoding the original material? Thank you

Hi Badunit,
thanks a lot for this clarification. It perfectly makes sense in the way you describe it.
Maybe you can give me an additional recommendation ?
At the end I need my film in h.264 format and of course I'd like the film to be in terms of quality as close to the original material as possible. Original files are AVCHD HA (so h.264 codec with 17Mbit/s) in 1080i resolution.
So far I have exported my material directly from FCP X (using either the "export to h.264" from FCP itself but also trying several h.264 export formats from Compressor). All these attempts ended up with a quality that is visibly worse compared to the original AVCHD file, even when I use a bitrate for the output that is much higher than the 17 MBit of the original material. Resolution is fine but scenes with fast moves are really bad in some cases. From a "naive" point of view this seems strange to me: An output file in h.264 25MBit/s should be as good as the input material that was h.264 17MBit/s, shouldn't it ?
From what you stated above, I now wondered if I should better export to ProRes first (thus building what you called the "master" in best available quality) and than build the h.264 file from the master with Compressor in a second step ? means: go the way "Highly compressed" -> Master -> "Highly compressed" instead of directly doing "Highly compressed" -> "Highly compressed" ? Would there be any difference ? Or is the material anyway transcoded to ProRes in the background when exporting to h.264.
Happy to receive any recommendations / experiences on this.

Near lossless HDV export?

Does CS3 have settings for near lossless HDV export - for those segments of the timeline where the video is unchanged? For example, let's say I have four HDV mpeg2 clips. The first two are clips that butt up against each other: no transitions, no effects. Clip 2 cross-dissolves into clip 3. Clip 4 has effects. In near lossless, I would imagine that for clips 1 and 2, CS3 would copy the frames (GOPs?) with no data change (instead of rerendering) up until the first dissolve. At the beginning of the dissolve CS3 would render and then, after the dissolve, go back to laying down an exact copy of the part of the mpeg on the timeline that was unchanged. For clip 4, CS3 would have to completely rerender.
Is this a nutty question? Or is there a setting to tell CS3: just copy the mpeg2 HDV video exactly - when possible?
Thanks in advance!

The question is not nutty but uninformed. Datawise there is no such thing as a single frame in native HDV. You should know that HDV is a compressed format which combines information over multiple frames. In other words a group of frames are compressed together and the processor decompresses them into separate frames when you watch the video. However, when you render, the processor re-combines multiple frames. Therefore you can not render on the frame.
The only way to render on the frame is to use a codec which decompresses the native formet once and for all into single frames. From there on you can go down many generations with minimum loss.
Use the award winning Cineform codec, either Aspect or Prospect (Aspect works perfectly for me).

HDV Export issues

I created a 5 minute HDV clip with mixed 29 and 23fps footage and exported out as HDV 24. I was able to play it back fine on my mac with Quicktime but any other mac or PC I tried to play it back it would tell me I am missing a QT component. All the QT's were Pro versions as well. Streamclip and Video LAN will open the file but again, No video. Only Audio. the only reasonable error I get is form the VLC player: main error: no suitable decoder module for fourcc `hdv6'.
The only thing I can think of why my mac will play it back is because I have FCS 2 on their and it adds additional Codecs that normal QT7Pro does not play back.
Any Ideas?
Thanks,
Ryan

Thanks for the quick response! I will try that as well. It would normally not be an issue, I just had a client wanting to look at my work and had no time to make it into a DVD (or mpeg2)I threw the .mov onto a CF card and loaded it onto my PC Laptop(only laptop I have) to show the client. NO GO. it would not play! I was sweating bullets at this point.
Also, If I wanted to scale down the video for web, and have it look nice and keep the aspect ratio. What is the best Compressor settings? I could not find a web version that would keep the 16x9 aspect ratio. The original file is just over 1GB and 250 MB or so would suffice for output.
Thanks for all the help.
Ryan

Error message ''Disk Full' when trying to export with CS6, works fine in 5.5

I get an error message when I try to export media in Premiere CS6 that I don't have in CS5.5
I use export media for a AVCHD 60fps sequence with a few photoshop images on top of the main track. In the export settings I choose ''match sequence settings'' which gives me a .mpeg I- frame, 1920 x 1080 P, 60fps, quality 50, and a I tick the ''use maximum render quality'' check box at the bottom.
It used to work fine but now I get a message: Disk Full where there is 1.5 TB free on the disk?
I have the exact same sequence made in Premiere Pro CS 5.5 and it exports fine.
It started to act weird after I used the queue for the first time and it went to the CS6 encoder.
Since I used that once and it gave me that message for the first time, even when I try to do the same thing directly in Premiere CS6 , I always get the same error message.
Question 2, is there a place to change the settings from 50 to 100 for the quality of this export profile?
By the way I can export with other profiles without problems but this setting is the only one that I've seen that lets me keep my 60 frames per second in the export
process. (Example: I can export this sequence in the H.264, 1920 x 1080, 30fps, high quality preset, using the maximum render quality in CS6)

Hi Guys,
Thanks for the input but if you read my message correctly and until the end I already can export to other settings and I want an answer to this problem. There's no logical explanation to why this suddenly wouldn't work with the same sequence that it used to do fine with and that CS 5.5 handles fine.
As I said earlier this is the only setting that lets me export my sequence with the 60 fps, that I know of, for further and easier manipulation. As my main camera provides me with these 60 fps I'd really like to be able to have them left in that transition phase and, no, I'm not gonna give up until I know, really, what's going on and solve that problem. If this is a bug it needs to be fixed, if not I want to know what's happening.
Also there's no answer to my question 2: Question 2, is there a place to change the settings from 50 to 100 for the quality of this export profile?
So for you experts out there the question is still hanging.

How do I stop Illustrator automatically adding numbers to file name when exporting with artboard?

I need to export with artboard. Illustrator automatically adds a number to my original file name. It won't even let me replace the old file. It is extremely annoying and makes flow with other programs really hard because they can't auto update, since the file name changes. When you have multiple files, you can't be manually renaming all the time. Anyone knows how to fix this? Thanks.

This has been discussed a few times, and here is a summary of the usual solutions.
http://forums.adobe.com/message/2989508#2989508
What is it EXACTLY you are trying to do. Are you trying to export a single page from filename.ai and make it filename.psd, (without any number afterwards). In that case you could delete the extra artboards prior to export, and then you won't have to checked use artbaords as there is only one page. Otherwise I would plan ahead so your end result will be filename-01.jpg, filename-02.jpg, and then everytime you use export artbaords those names will replace.
I am happy with the function as is, and would prefer to have a serial number automatically after the name when checking use artboards. But sounds liek you and others desire more options and thte ability to turn off adding to the filename.

HELP! What are the settings to export with the highest quality (I will show my project in a cinema.)

Hello,
I have a project I will be showing at a local cinema, and I need to have the best possible quality for that......
My source footage is SD, so I am exporting it as a MPEG2-DVD project, the first time I exported (with the default MPEG2-DVD settings) and burned it, it looked good (at least on my 34" TV) but I am not sure if that quality will be as good when projected on a cinema screen...
So, what I need to know is, which of the MPEG2-DVD export settings I must change in order to get the quality I am looking for.....
BTW I am using Adobe Premiere CS4 and the whole Creative Suite 4....
Thanks in advance
Al

If it looks good on your tv it will look good at the cinema.
The resolution will still be 720x480/576 if a dvd player is hooked up to the projector.

Videos export with purple/green artifacts/splotches/flashes with Media Encoder CC but export fine with Premiere Pro CC?

I use Premiere Pro CC to edit videos, and videos render fine when I export through Premiere Pro, but when I try to use Media Encoder CC, the video exports with weird splotches of green/purple artifacts all throughout. It almost looks like the video is glitching and having a seizure of green and purple. No idea why this happens. Could anybody help me? I use Media Encoder to export bulks of videos at a time through its queue feature, which is why I prefer to use Media Encoder for video exporting.
Please and thanks.
Specs:
Motherboard: MSI® Z87-G45 Gaming [Red on Black color] 2x SLI/CrossFire
Processor: Intel® Core™ i7 4770K 3.5GHz/3.9GHz Turbo 8MB L3 Cache HD 4600
Memory: 16GB Corsair® Vengeance™ DDR3-1600 1.5V (2x8GB)
Graphics and GPGPU Accelerator: AMD R9 295x2
Power Supply: 1300W EVGA
Operating System: Microsoft Windows 7 Home Premium 64-bit

Mitch,
I was hoping that you and others might have some insight as to whether the purple and green artifacts / splotches seen in the attached screenshots (taken from 4 consecutive frames here but occurring through the entirety of the clip) could possibly have resulted from exporting video with ~ Premiere Pro CS5 or 6 ? As seen below, these splotches alternate back and forth between purple and green in every consecutive frame. I was also hoping that someone might know if this is a relatively common type of artifact and how it is caused.

Error In Query Level export with multiple conditions

When i am running the following Query for Export with i am getting the result.
C:\Documents and Settings\ITL>exp scott/tiger@orcl tables=(emp) QUERY='"WHERE deptno > 10 and sal !=2850"' LOG=log011.log FILE=exp.dmp
Export: Release 10.2.0.1.0 - Production on Wed Jan 30 10:01:27 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
Export done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
About to export specified tables via Conventional Path ...
. . exporting table EMP 10 rows exported
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
Export terminated successfully with warnings.
But When I run with The following condition then it shows the following error...
C:\Documents and Settings\ITL>exp scott/tiger@orcl tables=(emp) QUERY='"WHERE deptno > 10 and job!='CLERK' "' LOG=log011.log FILE=Exp01.dmp
LRM-00111: no closing quote for value ' LOG=log01'
EXP-00019: failed to process parameters, type 'EXP HELP=Y' for help
EXP-00000: Export terminated unsuccessfully
C:\Documents and Settings\ITL>exp scott/tiger@orcl tables=(emp) QUERY="WHERE deptno > 10 and job!='CLERK'" LOG=log5.log FILE=exp01.dmp
LRM-00112: multiple values not allowed for parameter 'query'
EXP-00019: failed to process parameters, type 'EXP HELP=Y' for help
EXP-00000: Export terminated unsuccessfully
Please suggest a solution for it.

966523 wrote:
Padma.... wrote:
Hi,
The single quotes used for CLERK are causing the issue most probably.
C:\Documents and Settings\ITL>exp scott/tiger@orcl tables=(emp) QUERY='"WHERE deptno > 10 and job!='CLERK' "' LOG=log011.log FILE=Exp01.dmp
try replacing with this
C:\Documents and Settings\ITL>exp scott/tiger@orcl tables=(emp) QUERY='"WHERE deptno > 10 and job!=''CLERK'' "' LOG=log011.log FILE=Exp01.dmp
Two single quotes(not double quotes) in the place of one single quote for CLERK.
Thanks
Padma...Thanks A Lot...if/when you place all inside control file, then you do not have to worry about such complications

My new iMac with FCPX crashes when rendering complex templates and crashes when exporting with Motion 5

My new iMac with FCPX crashes when rendering complex templates and crashes when exporting with Motion 5
Using Motion 5.0.6 and Final Cut Pro X 10.0.7 on New iMac (December 2012) Mountain Lion,
Intel Core i7 quad-core a 3,4GHz, Turbo Boost fino a 3,9GHz
32GB di SDRAM DDR3 a 1600MHz - 4 x 8GB
Fusion Drive da 3TB
NVIDIA GeForce GTX 680MX 2GB GDDR5
During the rendering of complex FCPX mac crashes and I have to force a restart.
I also happens when I try to export movies with Motion 5.
Does anyone have the same problem with my new iMac?

Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
First, empty the Trash.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Triple-click anywhere in the line below to select it, then drag or copy it — do not type — into the Terminal window:
find . $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 -o -acl $ 2> /dev/null | wc -l
Press return. The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
The output of this command, on a line directly below what you entered, will be a number such as "35." Please post it in a reply.

Sorting singly linked list with minimum time complexity

Hi ...
anyone could tell me how can i sort singly linked list with minimum time complexity .... ????
Regards...

By MergeSort or QuickSort O(n log n). But then you
have to first extract the objects in the list,sort
them, then rebuild the list. But it will still bealot
faster than by keeping the list linked.Technically, I believe insertion sort is marginally
faster for small n ( <20 or so).Woohoo! So for 20 out of the possible 2147483648 array
sizes Insetion is faster!
Unfortunately, checking for that case probably wastes
all the time you get from using the faster sort...
That would depend on the actual distribution off array sizes. So it's an engineering decision.
Sylvia.

Can't export with alpha channel - Again!!!,

So, I have an intro that is designed as an overlay of the incoming video. The objects move out the way to reveal the video underneath. BUT, when I export the sequence the resulting movie has black in the background.
Now, I had this issue several months ago, and after tons of research and trial and error, all of a sudden it worked when I came back to Motion on another project. No explanation. It just worked.
Usually, I have the background set to Transparent and then export using Lossless and Alpha. Works fine. Well, not today. I've changed every export setting under the sun trying variations of Lossless with Alpha and also tried the Animation codec. No luck.
So, what is going on? Any thoughts?

Thanks for your help Patrick. I tell ya, I can't believe what's going on. As I said, this project until today has not caused me any issues what-so-ever. The other six sessions are totally fine. I also created a quick project with the same settings added text - then exported using the same settings I've used before, and it exports with the proper alpha channel.
Yet, I rebooted the Mac, made sure to delete old versions in the trash can and everything. Still, no alpha.
To keep moving forward, I literally had to use a color key in FCP to cut out the background color.
Crazy!

Clips exported with Media Encoder from AE are choppy (CS6)

Hi!
I'm using Media Encoder (6.0.3.1) to export clips from AE (11.0.4.2) so that I can work with them in PPro (6.0.5).
In Media Encoder I go to add AE composition and I've tried the YouTube HD 1080p 25 and the Broadcast HD 1080p 25 presets (the latter creates a much bigger file but I don't think the file size is the issue - for example, the biggest clip of approx. 1 mintute is 276MB).
The curious thing is that most of the clips that are exported are fine, i.e. they play back fine - the problem is that some of the clips go slow or choppy towards the end of the clip. So the last couple of seconds will be choppy. It basically looks like the frame rate isn't quite right.
Once exported from Media Encoder, I import them into PPro to do some more work - the problem with the clips is apparent when I play the original file in VLC (for example) or in PPro. So it seems like the problem occurs during the export from AE. When I export the video containing the AE clips from PPro the problem is obviously still there (wishful thinking on my part). I use AE just for keying and making some basic titles, nothing massively complex.
I had some problems with RAM preview in AE before, in other words, it wasn't playing the clips back in realtime and the exported clips with the problem look exactly like that (i.e. looks like the frame rate isn't right). I deactivated Enable Disk Cache in AE (Multiprocessing was already deactivated) and now I can play back clips ok in AE using RAM preview - even the ones that go choppy towards the end when they are exported with Media Encoder play back fine in AE.
Could Media Encoder be going back to some previous render files saved somewhere on my system and could that cause some of the exported clips to go choppy?
I'm new to Adobe so I'm just guessing here and I don't want to go about and delete stuff that might not have anything to do with this problem. As I've adopted the computer I'm working on from my predecessor and it's had several users since, the system is a bit of a mess and there are files all over the place. Empting the Disk Cache doesn't actually delete anything for example.
I'm really stuck here because I can't finish the projects I started working on with AE.... I would appreciate someone's input!
Many thanks in advance!
My system specs:
Intel Core i7-3930K, 3.20GHz, 16GB RAM, 64-bit operating system, GeForce GTX 680, Windows 7, Creative Suite CS6
Before using Media Encoder to export clips from AE I was just relying on Dynamic Link between AE and PPro by the way and that made all of the clips choppy for the whole duration (this was before I solved the RAM preview problem and I haven't checked if a working RAM preview would make a difference to dynamic link). So Media Encoder nearly solved the problem. I posted this original problem on creativecow (http://forums.creativecow.net/thread/2/1045810) but no one has gotten back to me about the new issue unfortunately.

Thanks for your reply!
I tried using Quicktime with PNG and it created a big file (1.18GB for a 1 minute long clip) that doesn't play back nicely in PPro unfortunately. But I then tried rendering the clip using a lossy format, H.264, in AE and it's playing back ok in PPro! I will just do that for the rest of the clips and hope that this is finally resolved. Many thanks for the tip!
Out of curisoty, do you know what might be causing the problem when I use Media Encoder?

Why is the version file smaller than the original file, although I didn't make changes in the file? And why is the keywords don't exporting with original files?

Hi! Why is the version file smaller than the original file, although I didn't make changes in the file? And why is the keywords don't exporting with original files?

Wild guess: you're using the the wrong export settings. You'll need to tell us more before we can help you - like the export settings you're usng, the size and format of the originals etc.

HDV export with minimum transcoding

Similar Messages

Maybe you are looking for