HDV imovie projects lose audio sync when burned in idvd

I have 80 min. HDV projects from imovie sent to iDVD, after burning them onto dvd they play fine then lose audio sync after about 60 min. or so.....

Painful in iDvd to do interviews when they happen to fall over the 60 minute mark, isn't it?
If it's of any consolation, it's more reliable in Apple's FCS2 / FCP => DVDSP.
Toast might be another option worth looking at....
Good luck on this.

Similar Messages

A portion of audio that is synced in iMovie, is out of sync when burned with iDVD. How can I avoid this?

I'm trying to burn a simple movie, using iMovie and finishing in iDVD. A portion of the audio is out of sync when burned, despite it being in sync in iMovie. Any suggestions?
Thanks.

Hi
Try to - Save as a DiskImage - then test this with Apple DVD-tool.
Does this play OK - burn this DiskImage by using Disk Util tool.
Set down burn speed to x2 or 4
Yours Bengt W

Audio disappears when burning in iDVD 6 from QT movie (from FCP)

Before burning, checked all the chapters and each plays with audio. When the disc burns it does encode the audio during the burning process but the only audio that is present when the burn if completed is the audio on the 1st menu. I only inserted video on menus two and three (using "Full Frame" menu) as I only want video; no audio on those two menus . I had to force quit twice and then ran Repair Permissions. Should have I trashed iDVD prefs and if so, is there only one to trash?
thanks for any help . . .this forum is invaluable.

I had to force quit twice and then ran Repair Permissions. Should have I trashed iDVD prefs and if so, is there only one to trash?
drag and drop all incidents of the iDVD plist to the trash. Use the finder or spotlight to locate all incidents of plist for iDVD. Looks like this:
com.apple.iDVD.plist
secondly, you will need to repair permissions on the HD.
applications > utilities > apple's DU
third, delete all encoded assets from the advanced menu.
forth, recommend using different media like Verbatim DVD-R Minus media and burn from a disc image using apple's DU or Toast at 4x or slower.
fifth .....be very patient while it encodes and burns. i've seen some dvd's take up to 2 days.
sixth ....make certain you have no less than 20GB of available HD space.
Good luck!
SDMacuser

Lose iMovie audio adjustments when burning to iDVD

Using iMovie 3.1 and trying to make an off camera voice audible by raising the volume control, but when I listen to the finished DVD in player, the off camera voice is so low it's inaudible. It seems that I'm getting a result opposite from the one i want. The off camera voice is recorded on one track only, while the on camera subject's voice is on both tracks.
Again, the adjustments sound fine in iMovie - it's only when I burn it to DVD that the off camera voice virtually disappears.

Hi k
There are several things that can lead to this.
I don't use the share/export to iDVD from within iMovie but
- close iMovie
- locate the project folder and in this the QT.mov file (with Your project "name".mov)
- this I drop into a new iDVD theme window (just inside the edge of it)
- if You by any change drop Your QT.mov file on the desktop and rename
it => result - silent movie.
You may cahnge the name "my phantastic movie" when it is a title in the
iDVD theme window without any problems.
Yours Bengt W

Imovie project when burned thru idvd looks horrible

I have worked for several months on making my first Imovie. It is about 1hr in length. It combines both narration, video, soundtrack and still images. When I previewed the project on imovie looked great. I can also export thru quicktime and it looks good, but not as good as it does in imovie. When I followed the directions on how to export to Idvd, I was unaware of how poorly the finished project looked in Idvd. I burned it and was let down as all my titles where pixelated and the still images are combing real bad. Also some of the images are jerky in the ken burns effect. I find this frustrating as I can save it as a quicktime file and it looks pretty good (but not as good as in imovie). It appears to me that everything I have tried as far as importing to idvd looks horrible when Idvd gets done with it. In fact even the Idvd menu I made looks pixelated and horrible. I am making this dvd to sell to others and to present at talks I am giving. The quality is so poor I am thinking about bagging the whole project. I noticed on the forums regarding both idvd and imovie many of the questions about the quality degredation in idvd dont get answered. Or when they do get answered, the answer is to purchase final cut or more software in general. What I want to know is can I make my excellent looking imovie look acceptable in idvd? If not, why? Why would mac make a option to make a movie project look good in imovie, but the only way to export it is to make it look horrible? Also, is there a way to make a dvd in idvd that looks as good as my Imovie project (without dropping 1,000$ for more software which I am not going to do as now I don't trust it until I see it first)? What am I missing here?

Hi Adam,
Just some general comments about exporting from iMovie '09. From posts on the forum, and from my own experience, it's best not to use Apple's preset export option "Share to iDVD". You may not have used this, but it produces an AIC (Apple Intermediate Codec) movie that doesn't look good when burned through iDVD, for some reason. Odd, considering that iMovie edits in this format. _The option "Share to Media Browser" gives much better results._
You don't mention what format your source footage is (to the best of my recollection). This may have a bearing on the final result (burned DVD). Is it DV or AVCHD or some other format? iMovie '09 has a reputation for producing less than stellar results with DV footage, due to the way it handles interlaced material. AVCHD footage turns out quite well on DVD after editing in iMovie.
If you have not already tried this, export using "Share to Media Browser". In iDVD, from the Media tab, drag your movie into the background area of the iDVD theme, then proceed to set up the DVD as usual. When sharing to the Media Browser, you have a range of sizes to select from. Try Large (960x540) and also HD (1280x720). I've used both but see little difference, if any, in the final DVD. But I do get quite good results with both. The picture is softer and less saturated when compared with the original AVCHD footage viewed via the camcorder on an HD TV. This is to be expected, given one is HD and the other SD, of course. But it shouldn't be as bad as you are describing.
There are many posts about DVD quality on the forum. As you would be aware, some offer very good advice. Try different methods using a short test project to see what gives the best results for you. Look out for an e-book by Steve Mullen - not free, but some good tips there.
Hope this helps in some way. Quality issues can be frustrating!
John
Message was edited by: John Cogdell

Loss of audio sync when importing Samsung Galaxy 2 (GT-I1900) video to Premier Elements 10

I am loosing audio sync when I import video from a Samsung Galaxy 2 GT-I1900 phone even when using settings chosen by Premier Elements 10.
The file plays OK in Windows 7 media player.
I have tried using both direct import from the phone and transferring the file separately without solving the problem.
The Premier Elements is version 10.0(20110902.Mol11.B123.280463)
Unlinking the audio and video makes no difference.
VideoReDo reports the file as :
File:                                     Name : C:\dcim from samsung\DCIM\Camera\20121121_114639.mp4
                                           Size : 0.886 GB
                                       Duration : 00:09:45.22
                                       Mux type : MP4
Video:                                Encoding : H.264
                                  VideoStreamID : x201
                                     Frame rate : 29.91 fps
                                  Encoding size : 1280 x 720
                                   Aspect ratio : 16:9
                                Header bit rate : 20.000 Mbps
                                     VBV buffer : 380 KBytes
                                        Profile : Baseline/4.0
                                    Progressive : Progressive
                                         Chroma : 4:2:0
                                   Entropy mode : CABAC
                                       Bit rate : 11.626 Mbps
Audio Stream: 1 (Primary)                Codec : AAC
                                         Format : ADTS
                                       Channels : 2.0
                                       Language : eng
                                            PID : x202
                                  PES Stream Id : xC0
                                  Sampling rate : 48000
Letting VideoReDo simply rewrite the file resulted in loss of all but the first few seconds of audio.
Elements seems to have imported the file as NTSC-AVCHD-AVCHD LITE 720p 30fps
The computer is running Windows 7 Professional 64 bit version Service Pack 1 kernel 6.1.7601.17944 (reported by SIW)
The computer motherboard is a Gigabyte Z68x-UD3H-B3 with an Intel Core i5-2500 CPU at 3.30GHz. Memory is 4GB.
I note that others have had similar problems with non video recorder recordings.
Can you suggest any file conversion of the original that will work – I have tried several with no improvement in the final result.
And can anyone shed light on what is the basic cause of these problems?

According to the Adobe installation information the trial version of Premiere Elements 11 is fully functional and the watermark is only present until a licence code is purchased.
I have edited AVI footage from a camcorder using the program with no problems (and no loss of audio sync) and the watermark is also present with this.
The odd placement of audio and video was caused by my not dragging the clip carefully enough.
What is odd is that the clip plays completely normally using WIndows Media Player and VLC Media player so I would expect Premiere Elements to be able to handle it without problems.
I think that there is some sort of bug in Premiere Elements' handling of mpe4 files (both in versions 10 and 11) rather than there being anything wrong with my computer.
Is there some way of communicating this directly to the Adobe programers ?
I enclose screenshots of the project settings:

Multiplexer error when burning from IDVD

I am getting a Multiplexer error after rendering a movie from IDVD. The project is 7GB in the "project info" screen. When I open the folder in "documents" it says its size it 92 KB. "Project info" says I have over 60 GB available. ? Do I need an external hard drive? Am I out of memory? Thank you!!

I am also having a multiplexing error using IDVD and I movie 09. I like to think I can solve these types of problems on my own but I am running out of good ideas. I have spent the last 10 days trying to burn the same project. I have pages of notes of things I have tried. I have been using I DVD for several years and this is the first serious problem I have encountered. I believe that this issue needs to be resolved by Apple.
I don't believe that size is an issue. My project is 240 min long and is created using 2 seperate IMovie Projects. The first one burned just fine but the second one gives a Multiplexer error at the end of Processing the Movies. I was able to isolate the part of the movie that causes the error by using QT to split the original movie into parts. Once I was able to isolate the parts of the video that will consistently fail I tried to re produce the original source clips and replace them in the original project (also tried twice to re create the project from scratch). Unfortunately the same error happens.
I am willing to try any other suggestions so please share if you know what is going on. I am getting desperate as this Movie is for a customer and I need to deliver.

IMovie audio problems when burning in Toast 6

Hi,
i've tried to burn an imovie project in idvd 5 but i get 'the error #-1 was reported' like most people have been and i've tried loads of things suggested to fix it with no joy.
I then sent the imovie project to toast titanium 6 where it burned fine. However, when i watched it i noticed that although toast had picked up all the audio (both dv audio and aiff), it did not pick up all the volume adjustments during the movie. how annoying! for example: i have an aiff clip that fades into a movie clip with the sound gradually going down but Toast picks up the sound staying at the same level. this also happens with volume adjustments in a DV file.
Any suggestions why this happens / how i can fix it?
Cheers,
Andy

Andy,
This question is really in the wrong place - this is the iDVD '08 forum and not the iDVD 5 forum.
From the description of your problem using Toast, it sounds like you didn't actually export a DV video movie out of iMovie.
Export a DV video movie out of iMovie (it will run 13 GB per hour) and play it back with the QuickTime Player to see if the audio settings you made are really there. If this movie plays OK, you can bring IT into iDVD or Toast for turning it into a DVD.
If the DV video movie you created STILL has audio problems in the QuickTime Player, ask you question about THAT issue in the correct iMovie forum.
F Shippey

Audio goes in and out of sync when burned dvd played on standard DVD player

I made a short film recently (7:00 mins) and once completed and burned to DVD using iDVD and DVD Studio Pro about 20% of the clips have out of sync audio. Just slightly out of sync. Some more noticeable than others.
Playing off the timeline syncs perfect, the exported prores 422 mov file syncs perfectly, and if the finished DVD is played on my mac or my pc the sync is perfect, but when played on a standard dvd player to my TV I get the syncing problem, but only at certain points through the film. As I said, about 20% of it. The rest of the film is fine.
Shot on Canon 5d mkII - footage converted to prores 422 1920x1080. Audio recorded on Zoom H4N with some ADR recorded on logic pro. Audio synced manually using clapper board reference. Using a 27'iMac with current OSX update as of 14 March 2011. Edited in FCP 7, exported to proress 422, burned to DVD with current iDVD and DVD Studio Pro, all current versions and updates.
I have tried exporting to mpg4 and mpg2 - no joy. I checked audio bit rates and discovered the logic recorded stuff was 44.1khz as opposed to 48, so I converted to 48 but still no fix.
I am STUMPPED
Any suggestions?
Cheers
Dallas

Should I convert just the clips which are out of sync in the DVD, or all of theclips in the FCP timeline?
If that is the issue, wouldn't I have the problem in the final prores mov as opposed to just when its played dvd to tv?
Ill try it though. Its an odd problem so its likely to have an odd solution. Willing to try anything at this point.
Thank you.

Slideshow audio gets out of sync when exported to iDvd

I made a large slideshow for a 40th anniversary party. It has 244 images & 7 songs. It is 29 min 54 seconds long. When I view the slideshow in iPhoto it works fine & the last image ends right at the end of the last song.
When I exported it to iDvd, the audio gets out of sync with the video. By the end of the first song, the video is about 2 seconds ahead. By the end of the last image, the last song is cut of by about 30 to 45 seconds. I tried exporting the slideshow directly to iDvd. I also exported it as a large movie & it did the same thing.
I'm using a 17" 1.67ghz powerbook with 1.5 gigs of ram.
I'm using OS 10.4.2.
I'm using iPhoto 5.0.4
I'm using iDvd 5.0.1
The images are scanned tiffs. I also have jpegs that I shot with my canon eos digital rebel xt.
Anybody have any ideas or work-arounds?

I suggest you either use iDVD to create two slideshows or use iMovie to get all 277 images and the 8 audio tracks into one slideshow. If you use iMovie after you get the slideshow/movie put together and completed quit iMovie. Then go into the iMovie project package (Control-click and select Show Package Contents). The find your movie in the Shared Movies folder and drag it into an open iDVD menu. This allows iDVD to to the rendering of the stills and give you a sharper image. That movie file you're dragging is a reference movie so leave it where it is and just drag it into iDVD's window.
If you can live with two separate slideshow (consider it a potty break between the two) and you don't have or need the Ken Burns effect, you can get excellent results by building the slideshows with iDVD from imported stills. The sync to audio in this method works as advertised. I like to add a blank slide at the end of the slideshow so the music fades out during a blank, black slide.
OT

Skipped audio files when burning disc in iDVD.

I burned a DVD using iDVD version 7.0. The audio files sound perfect on the computer but on the disc there are skipped areas noted in three different audio files. I did try different discs and burned discs on both my laptop and my desktop. I have used this program before but never encountered this problem. Any tips? Thanks

Hi
My notes on this.
No audio on DVD disc.
Most common origin.
1. Imported audio from iTunes.
• In iTunes copy out as an Audio-CD .aiff (Same as played on standard Stereo CD - no .mp3)
• Use this in Your movie project
2. Low - Free Space on Start-up/Boot/Internal/Mac OS Hard disk makes it hard for iMovie to work as intended.
Down to 1.3 GB and it doesn’t work - especially audio don’t migrate over to Media Browser
(iM’08 & 09)
3. Material in iMovie’08 & 09 - Shared to Media Browser and here selected as Large
large.m4v. It silenced out this project in iDVD. By making a slight alteration - provoking it to ask for a new Share/Publish to Media Browser and here selecting 640x480 - and audio was back when a new iDVD project was created including this movie.
Minuscular - - 176x144
Mobile - - - - - 480x360
Medium - - - - 640x480
Large - - - - - - 720x540 960x540
HD - - - - - - - - 1280x720
4. Strange audio formats like .mp3, .avi etc.
• Change them to .aiff. Use an audio editor like Audacity (free)
5. Main audio is set to off in System Preferences - Does this by it self - Don’t know why
Cheque Audio-Out resp. Audio-In
6. Ed Hanna
Had the same problem; some Googling around gave me a kludgy, but effective fix
Downgrade Perian from recent versions back to version 1.0.
That worked for me, and so far I haven't encountered any deficiencies — except it takes more advanced versions of Perian to enable QuickTime to handle subtitles in .srt format — that I have noticed.
7. GarageBand fix.
In this set audio to 44.1 kHz (Klaus1 suggestion)
(if this don’t work try 48 kHz - me guessing)
Before burning the DVD.
• Do a DiskImage (File menu and down)
• Double click on the .img file
• Test it with Apple DVD-player
If it’s OK then make Your DVD.
Burn at x1 speed.... (or x4)
• In iDVD 08 - or - 09
• Burn from DiskImage with Apple’s Disk Utilities application
• OR burn with Roxio Toast™ if You got it
Yours Bengt W

Export as QuickTime Movie - lose audio sync

I have a 10 minute project that basically is a sequence of 10 nested sequences. It is an HDV project. I need to export it as a QuickTime Movie to maintain the ability to show it in HD. When I do so (using Export->QuickTime Movie - I am not using "Using QuickTime Conversion"), I maintain "Current Settings". The resulting .mov file, when played back in QuickTime Player (or anything else) has a progressively severe loss of audio sync. This is not present when playing the project within the timeline in FCP (6.0.3).
I have tried opening the project on a different computer with a virgin version of FCP 6.0.3, with the same results. I also made sure to render the individual sequences as well as the master sequence. I created a new sequence and added the individual chapters again, with the same result. I tried using the Media Manager to bring the project over to another computer - same problem. I also took this to an Apple One-to-One class with a FCP expert who couldn't figure it out either.
I could really use some help here.

First of all, thank you for responding.
I don't have a capture delay. The audio rate is 48 khz.
Interestingly, I had previously tried the separate export and stitching you suggested, but a strange thing occurred. If the resulting quicktime movie was created through a Save As... command, you wind up with a self-contained movie. When I did that, I started to get weird audio repetitions or dropouts as the movie went on. On the other hand, if I left it a reference movie, this didn't happen.
Anyway, this is a workaround, but it means that the whole thing has to be done over every time I make any change at all, and I am also concerned about getting rid of this problem for the future.
Any other thoughts?

Idvd does not sync when burning to dvd

I am using a MacBook Pro with OSX, FCP 7 and iDVD 7 or 8 (it's burning now, so can't confirm). I have a 64 minute video (that includes motions, etc in iDVD. I exported the FCP to QT movie using the default settings. Everything remains in sync in FCP and iDVD. When I burn to a disc, it goes out of sync about half way through the movie. I have searched for solutions in the support community but things I have tried do not work.
I have one more question, but I may have to go to FCP community. I export to QT with default settings. Is there another way to export that does not compress so much?
Thank you for your help.

I did notice the "sequence" indicated 32 bit and all the clips, wav music, etc. are 16 bit. Is that normal?
May be but I would.
• Convert all material to formats that FinalCut has easy to use and that match the Final product (Movie)
• especially the Audio file .wma, wav etc and 32-bit - is no good start
- convert them to .aiff 16-bit 44.1kHz or 48kHz
• Set up a NEW Project - BUT FIRST select - right kind of project depending on material - AND FINAL MOVIE PROPERTIES.
THEN FIRST - Start a NEW PROJECT - Else it will not work.
Yours Bengt W

Audio problem when burning DVD

Hi, Hope that someone can help me, I have already make several DVD's,and those went fine, but the latest Imovie project is with spoken audio.
When I try to burn this with IDVD 5.0.1 everything went well till IDVD has come to the audio part, hereby it goes wrong. I didn't get a failure message but nothing happened further on.
Hope someone has a solution!
G5 Mac OS X (10.4.3) 2x1.8 ghz

Hello, prutgers,
You will need to be a bit more specific with your problem so we can help you.
What do you mean by 'it goes wrong'? What exactly happens?
You need to know that when your DVD is encoding audio, the process appears to be doing nothing. If you leave it alone for a while, it just may finish. Maybe you are not waiting long enough.
Especially if you don't get an error message. What are you doing? Did you force quit? Did the DVD burn and has an audio problem?
Give us more information!

Why is sharing HDV iMovie Project back to camera not in real time?

The posting from Michel Raymond on Dec 22th, 2009 asked the question of why is the transfer of iMovie HD Project to camera so long. In his case a 50 minute iMovie Project would have taken 1300 minutes to transfer had he proceeded.
In my posting of Dec 18th I pointed that my 57 minutes 48 GB HDV Project would have taken 43 hours to archive back to camera on mini DV tape.
Bengt Warleby, in his reply on Dec 23rd to Michel Raymond's posting, said that " to copy back to camera (mini DV tape) should take same as movie duration".
So I carried out a simple check of this possibility by downloading 6 minutes of HDV original footage to make a new 6 minute 4.2 GB iMovie Project. No editing was carried. ie no voice-overs, no transitions, nothing extra at all to modify the original footage. I then shared this Project back to the same video camera from which the original footage had been downloaded.
The first stage , "Mixing Audio" was very quick, less than 1 minute.
The 2nd stage of "Encoding" TOOK 23 MINUTES!
The final stage of "Writing to tape" took 6 minutes.
SO, IT TOOK A TOTAL OF 30 MINUTES TO TRANSFER BACK A 6 MINUTE iMOVIE PROJECT TO CAMERA.
WHY? Why was further encoding required when no changes or additions had been made to the original footage? Why was it not transferred back in the same real time as it was downloaded?
HELP.! I really need to have some answers.

MauiJim wrote:
.. Is it possible to open the '09 project with '06 to utilize the share to camera feature in '06?
in iM09, choose Export using QT, and for SD choose dv-stream, HD choose QT/AppleIntermediate.. these are the only two codecs in use in iMHD6.. don't be surprised: ~13/40GBs/h ..
Is Apple considering an update to add the share to camera feature to '09 or possibly in a future version? It's a valuable tool for archiving to tape rather than DVD/HD.
speculation, esp. on future  products is not allowed as topic on this board..
.. imho, this feature was axed&buried finally with iMHD6..

HDV imovie projects lose audio sync when burned in idvd

Similar Messages

Maybe you are looking for