Hdv lines when compressed

i am working on an hdv project. i am capturing using easy set up hdv 1080i60. everything is fine in the timeline but when i export to a quicktime movie, there are some lines in the picture. especially when there is a lot of motion. you can really see it in some shots where there are fast moving objects that go from the right side of the frame to the left side of the frame. it is almost like a "digital trail". does anybody know what this is? and how to prevent this?
thanks,
clay

does anybody know what this is?
That is an artifact of the HDV compression. Fast movement, especially side to side, causes horrid artifacting. This is due to how HDV compresses the image. HDV is 1440x1080...anamorphic 1920x1080...and runs about 13.5GB/hour. Now DV is 720x480, and runs about 13.3GB/hour. They have roughly the same data rate, yet HDV is 3 to 4 times the size of DV, dimension wise. So what does that tell you about compression? That HDV is HIGHLY compressed.
and how to prevent this?
Don't shoot fast motion or fast panning shots with HDV. Or, don't shoot HDV. Not what you want to hear owning an HDV camera, but that is the drawback to the format. You can capture uncompressed HD formats, or better compressed HD formats, with the use of capture cards, but then you need to tote around a MacPro, and that isn't very "in the field" friendly.
Shane

Similar Messages

[LaserJet Pro 200 color MFP M276nw] only vertical lines when scanning, scanner broken?

Hi all! I have a problem with the scanner in my HP all in one. If I scan (using the printer function or apples ImageCapture: same result) the output is just a lot of vertical stripes (in colors when in color mode). Not a trace of the image I try to scan. The lines are there even if i scan an empty white page. I see the stripes both when doing a preview scan and an actual scan. The problems are very similar regardless of if I use the flatbed or the feeder scanner (they are separate scanner hardware, yes?). I have updated to the latest software for the printer/scanner and I am connecting over bonjour via wireless. I am on Os X 10.9.1. Anybody having similar problems or is my scanner just plain broken? Thanks in advance!Jon

, , I understand that both of you are seeing vertical lines when scanning from your Laserjet M276nw. First, make sure the printer is plugged directly into a wall outlet and not a surge protector. Now, so I know where to begin I'd need to know the following:If you are seeing the vertical lines when you copy as well as scan?Are you seeing the vertical lines when you copy from the flatbed? The document feeder? both?If you are seeing the lines from both the flatbed and the feeder are they in the same place?Once I know this I'll be better able to assist you.

My Imac is showing gray screen with red line when booting and restarts again

My Imac is showing gray screen with red line when booting and restart again, I can load it in windows 7 safe mode with red lines across the display, pls help

The graphic card is damaged. You can't do anything more than taking your computer to an Apple Store or reseller and getting your graphic card replaced.
Sometimes, when the graphic card is damaged, operating systems can't start. That's caused because the drivers that make the graphic card work detect an error, telling the operating system that the graphic card is unusable, so the operating system can't start and it restarts. However, you can start in safe mode because operating systems use a basic driver in this startup mode

To run a report from command line, when using jdbc-odbc bridge

Hi,
How to run a report from command line, when using jdbc-odbc bridge?
Usually with tns, we do by "rwrun module=<> userid=<user>/<passwd>@tns".
with odbc, we do by "rwrun module=<> userid=<user>/<passwd>@odbc:DSN"
Please specify, what is command line arguments for jdbc-odbc bridge driver?
Environment : Oracle 9i Report Builder on WinNT
Database : Sybase
Regards,
Ramanan

Hello Ramanan,
Report Builder : connect JDBC Query in Report Builder is to through Connection Dialog in JDBC Query Editor. User can use a Sign on parameter (can use, default : P_JDBCPDS or can create new) to connect to JDBC Data Source. Connection once made will be mentioned and will be reused through out Reports Builder.
JDBC PDS allows user to connect one or more same or different kind of databases.
While running report through runtime or Server, user can pass the sign on parameter(connection string) value, like any other user parameter.
Syntax for connection string : <username>/<password>@databaseURL . The syntax of database part of connection string depend on the type of JDBC Driver used to connect to Data Source while designing the JDBC Query. databaseURL refer to the location of the database and its format depend on the JDBCPDS river selected in design time while creating the JDBC Query.
rwrun eg :
rwrun report=jdbc_odbc.rdf destype=file desname=output.html desformat=html P_JDBCPDS=scott/tiger@database
Server eg :
http://server.com:8888/servlet/RWServlet?server=MyReportServer+report=jdbc_odbc.rdf+destype=cache+desformat=html+P_JDBCPDS=scott/tiger@database
http :
Please see ORACLE_HOME/reports/conf/jdbcpds.conf for more information.
With Regards
Reports Team

I have updated on line when I was prompted to do so, and now my phone won't turn on it just shows the itunes logo and the usb plug on the screen What do I do to get all my icons and everything back to normal. i will lose info if I hit the restore button.

My phone is not coming on except for the usb cord showing in the screen with an Itunes logo after doing an update that I received on line when putting my phone into the station for the night, I saw that there was an update so I said yes. Then this happen. Could someone please help me here, because I do not want to restore or I will lose everything I have with numbers and music in my library. Please advise and respond to me. I use my phone for work as well and can not get the contacts up or anything except for this itunes and usb showing on the screen.
Thank you,
Diana

Hi there briana_webb82,
You may find the troubleshooting steps in the article below helpful.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
-Griff W.

Working with Outlook 2011 for Mac, my mails are slow and I can work only on-line, when off-line, mail cannot be opened because it is only partially downloaded. How to solve??

working with Outlook 2011 for Mac, my mails are slow and I can work only on-line, when off-line, mail cannot be opened because it is only partially downloaded. How to solve??

Try http://www.microsoft.com/mac/support.

My 27" iMac displays vertical green lines when turned on and then will not boot up

Can anyone tell me why my 27" iMac displays vertical green lines when it is turned on and then will not boot up?

Welcome to Apple Support Communities
The display or graphic card are damaged. The only thing you can do is to take your computer to an Apple Store or reseller to get your computer repaired.
If you use an external display with your Mac, connect it to your computer and see if these lines appear on the external display. If so, it's a graphic card problem

How to maintain original lines when converting a word file in a PDF

Unfortunately the table lines often change when converting a word file in a PDF, e.g. dotted/broken lines into straight lines or different kinds of broken lines. How can I maintain the original lines when converting the documents?
Many thanks in advance for your advice.
Li Li

Hello,
Ok, this is the background.
I’m a publisher. Any document to end user will go as pdf. And off course it preserves the word appearance. We ship our manuals only in pdf. At this point my end users have to copy the “CODES” into his editor to run the product. So when doing it, the “Codes” copied from pdf to his editor loses its format. Editor need not be the actual one; you can also test in a notepad.
P.S: You can find the difference by copying the code from word to notepad and pdf to notepad
Hope you now understood the purpose what I’m looking at for.

How can I not show my e-mail address in "from" line when sending out e-mails?

I don't want to show the e-mail address in the "from" line when I send out e-mails. Is there a way to hide that?
Thank you!

whiskey sour wrote:
Okay here is where I am at so far and thanks for sticking with me, we may have success eventually! Can you confirm the following:
1--I Go into the iMac Address Book and click on File/Export/Address Book Archive.
2--It then asks me where I want to save Address Book and I indicate Desktop.
3--I then assume I somehow transfer this Desktop file to the iBook--can I just copy the file, email it to the iBook, and paste it into the iBook Desktop?
Yes
4--If I'm accurate so far, I then do the same with the iBook Archive and save it
to the iBook Desktop.
Yes
5--NOW I open the iMac archive that is on the iBook desktop and it will ask me if I want to overwrite the existing iBook address book and I indicate Yes and it will then place the iMac address book on the iBook.
Yes
6--When and if I want to put the iBook address book back into the iBook I click on the file that is on the iBook Desktop and proceed to put the 'old' iBook address book back in.
That's it.
If I am correct on this, another question arises--does this method transfer every email address I use as I notice in Address Book under 'All Contacts' there are some that are missing. I may not have manually added each and every address to my Address Book so maybe that is why some are missing and may not show up in this transfer of Archives? Thanks for your patience Barney.
That's what I would assume. Like I said, the Archive is really just a copy of the AddressBook folder which contains everything related to Address Book and Mail's previous recipients.
Now, the Address Book contacts and Mail's previous recipients are different entities--they just share the same storage location. So, if that is what you mean by there are some missing, they should still auto-complete in Mail since the previous recipients also is used for auto-complete.

I don't want to show the e-mail address in the "from" line when I send out e-mails. Is there a way to hide that? Thank you!

I don't want to show the e-mail address in the "from" line when I send out e-mails. Is there a way to hide that?
Thank you!

No.

Double print in one line,when convert spool to PDF

Dear Expert:
I have a problem to solve when convert spool to PDF,there is one line will double imaged.
The form is created by smartforms.
I have tryed many ways,retype the text or start a new line,all didn't works.
So could any one tell me how to solve this problem.
Many thanks.
[Picture of the PDF|http://picasaweb.google.com/nika.wei/SAP#5274740000941172338]
Edited by: Nika Wei on Dec 1, 2008 9:50 AM

Thanks for your quick response.
I used the program you mentioned to download spool to PDF.The download file is like the link picture.
And the form will not overlap when I print it immediately.But it will overlap the first line when preview or convert to PDF. My user don't want to print it immediately they want to save it to PDF.
I know maybe there is something wrong with the format, I tryed retype the text but it didn't works.

How to pass in variables using the command line when starting ActionScript native app

How do I pass in variables or startup arguments using the command line when starting an ActionScript native app? For example, I have my app call MySweetWidget and it has been compiled with Adobe AIR captive runtime so now I have MySweetWidget.exe.
In the command line, I am calling MySweetWidget.exe and would like to pass in variables or properties to the application. I would assume that those variables are then read from the loaderInfo.parameters object.
Please let me know if the Adobe AIR runtime supports passing in parameters to the native runtime. If so, I would like help determining the correct format of how to pass in the variables. Then would you read those from the loaderinfo.parameters object?
Thanks,
Jeff

I found the answer to my own question:
Yes it is a supported feature. It is documented on the following page:
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/desktop/NativeApp lication.html#event:invoke
When you subscribe to the invoke event of the NativeApplication it will subsequently dispatch the event and you read the e.arguments Array object to get the startup arguments passed into the native application.

Unwanted lines when using effects.

Having much trouble with unwanted thin lines when using outlined text with multiple effects - outer glow & bevel and emboss. Typically the lines show through the outer glow effect in the color of the background. It is then especially noticable with the darker background I used for this layout. The lines are not visible on screen but show up in printing. I have also tried saving as PDF and then printing but no difference.
Here is a scanned portion of the layout.
Any help would be greatly appreciated!

The transparency flattener preset was set to medium resolution.
If it's transparency stitching then the flattener preset you use in the print driver would make a difference. Try High resolution or make a flattener preset that has a heavier raster balance. Here's a flattened PDF/X-1a test with low res vs. a customized high res:
The custom flattener on the left has no stitching at any zoom view

Why does my photoshop keep giving black and white lines when I use my lasso tool?

why does my photoshop keep giving black and white lines when I use my lasso tool? It has never done this before last night. It filles the Whole lasso seleted box with (what it almost looks like) black and white caution lines. then when I go to zoom out, my zoom option starts to mess up where you cant click and move your mouse to zoom in/out with ease but where you have to click to zoom out (many times).
Can ANYONE help me?

I am using CS5, WIndows 7, I am not sure how to tell if my drivers are up to, and I am more than happy to screen shot it.

Office 2010 Don't print blank lines when data fields are empty

How do you do this in office 2010? Where do we go now?
This used to be under the Tools menu in previous versions:
On the Tools menu, click Mail Merge.
In the Mail Merge Helper dialog box, click Merge.
NOTE: You must select the main document and data source for the merge before doing step 2.
In the Merge dialog box, under When Merging Records, click either:
Don't print blank lines when data fields are empty.
-or-
Print blank lines when data fields are empty.
Click Close in the Merge dialog box, and then click
Close in the Mail Merge Helper.
NOTE: If you made no changes in the Merge dialog box, the
Close button is not available. Click Cancel instead.
Back to the top

Hi,
In Word 2007 or Word 2010, you can add
Mail Merge Helper to the Quick Access bar, and perform the steps then.
To add the
Mail Merge Helper command in the Quick Access Toolbar in Word 2007, follow these steps:
a.
In Word 2007, click the
Microsoft Office Button, and then click Word Options >
Customize.
In Word 2010, click File > Options > Customize Ribbon.
b.
Click
All Commands in the Choose commands from, and then click
Mail Merger Helper in the Choose commands from list.
c.
Click
Add, and then OK.
Best Regards,
Sally Tang

Hdv lines when compressed

Similar Messages

Maybe you are looking for