HDV output to 16:9 ratio QT file

I've finsihed a small project on FCP5 shot & edited in HDV. I want to get it out of Final Cut and create a QT file (download or streaming) that retains the aspect ratio 16:9 and has full motion (much like the film trailers you can watch on the Apple site). Is there an easy way to do this? Everything I try ends up being a stretched standard TV frame ratio or something that looks terrible with jerky movement. There should just be a thing you can select in compressor to give what I'm looking for. Any help? Thanks.
Powermac G5 Dual 2.0 Mac OS X (10.4.6)

Bob -- try this workflow on a small piece and see if it doesn't work for you...
File - Export - Quicktime Conversion - make sure it's set for Quicktime Movie export.
Change compression method to BROADBAND HIGH. THEN click OPTION and then SIZE... change size to 480x270 and click out to save.
Let it run.
Then, open THAT in iTunes and using iTunes, select the video file and right click (control-click) and choose 'convert for iPod.'
That's always worked for me.
When you are done, do another right click on the video file in iTunes and do a SHOW FILE IN FINDER (or something like that.) Look for the .m4v file... that's the iPod video one. Open it up and see if it isn't 16:9.
Good luck,
CaptM

Similar Messages

Procedure to save the output of a query into excel file or flat file

Procedure to save the output of a query into excel file or flat file
I want to store the output of my query into a file and then export it from sql server management studio to a desired location using stored procedure.
I have run the query --
DECLARE @cmd VARCHAR(255)
SET @cmd = 'bcp "select * from dbo.test1" queryout "D:\testing2.xlsx;" -U "user-PC\user" -P "" -c '
Exec xp_cmdshell @cmd
error message--
SQLState = 28000, NativeError = 18456
Error = [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'user-PC\user'.
NULL
Goel.Aman

Hello,
-T:
Specifies that the bcp utility connects to SQL Server with a trusted connection using integrated security. The security credentials of the network user,
login_id, and password are not required. If
–T is not specified, you need to specify
–U and –P to successfully log in.
-U:
Specifies the login ID used to connect to SQL Server.
Note: When the bcp utility is connecting to SQL Server with a trusted connection using integrated security, use the
-T option (trusted connection) instead of the
user name and password combination
I would suggest you take a look at the following article:
bcp Utility: http://technet.microsoft.com/en-us/library/ms162802.aspx
A similar thread regarding this issue:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/b450937f-0ef5-427a-ae3b-115335c0d83c/bcp-connection-error-sqlstate-28000-nativeerror-18456?forum=sqldataaccess
Regards,
Elvis Long
TechNet Community Support

How to write the output of a mapping into a file (OWB10.2

Hi
I am using Oracle 10.2.0.1 version of OWB.
the task is to write the output of a mapping into a File (Flat File).
Please help me out!
Regards
Abi

Hi,
Create the file format thru OWB and mention the location in OWB. Deploy the file and it will be ready to use for target load. Make sure the connection to the target loc is available.
Regards
Bharadwaj Hari

Is there a way to create multiple BQY output to one of the Job File ?

Hello,
I am using EPM11.1.2.3.501 version.
BQY report due to the large amount of data, it is difficult to use a WebClient.
So will share on a quarterly basis.
However,
If modifications are to occur,There are difficulties must modify each file.
For example,
Register 2014 1Q, 2014 2Q, 2014 3Q, 2014 4Q BQY Job file.
When you run the job, the output of the job file is created.
If the job file is changed, you must modify all four files.
This will be only grow ations.
Is there a way to create multiple BQY output to one of the Job File ??
Please help me.
Thanks

It is not possible to have multiple BQY outpu into a job file.
Thanks,
KK

How to download alv grid output(with field catalog) into excel file format

Hi all,
How to download alv grid output(with field catalogs) into excel file format and same file has to download to application server.
Please help.
Regards,
Satya.

Hi,
On list where alv is displayed, select export icon( green color -> ),select spread sheet.
This will display records in Excel sheet.

Output array elements to a .dat file

I've written a program that creates two arrays, each containing 999 pseudorandom numbers. Now, I need to output these numbers to a .dat file containing two columns of data (one column for each array). How do I do this?

Never mind, I figured it out on my own!

Output of SQ01 Query to a file in background

Hello,
I have created a SQ01 query for a certain specific outpur from my SAP system. I need to get the output of this query to a file. While i have tried executing this report from the frontend; it works smoothly, and based on the variant it creates the output and writes to a file at a remote location. But while i am trying to process the same query using background job, it creates a spool request and doesnt export the data to a file.
Can someone please help me in getting me right in case i am doing anything wrong.
Regards,
V

Hi,
SAP have created a standard program RSTXPDFT4 to convert your Sapscripts spools into a PDF format.
Specify the spool number and you will be able to download the sapscripts spool into your local harddisk.
It look exactly like what you see during a spool display.
Please note that it is not restricted to sapsciprts spool only. Any reports in the spool can be converted using the program 'RSTXPDFT4'.
Regards,
Pavan

Ant ; how to move nonjava files to the output folder whn i comile java file

Hi when i compile my java file using javac ant task, i want to move non java file to the same output folder where the dot class file are stored. example if a package has 2 java file and a .properties file, when i javac task compile that package .properties file should move where the .class files are moving. can anyone help me please

An ant target can carry out multiple tasks. You need to put the <javac> and <copy> tasks in the same target in your ant file.

AS3: outputting trace() content to external txt file

the question's in the title. ive got a swf but i've gotta run
it on a nokia n800, which means trace() content will be lost and -
boy! - do i need it!
so how can i set my swf up to output its trace content to an
external txt file?

hello kglad
well, not 'lost' thats misleading, sorry. i mean: the swf
will be running on a browser outside the flash authorising
environment so the output window won't be accessible, therefore i
need a way of printing out the trace() output to another source.
the help files say that trace() can output to the output window OR
to an external txt file. only it doesnt actually go on to say quite
HOW you can output to said external txt file, rather
irritatingly..

Is there a way to set the aspect ratio or file type in the camera for video settings?

I always convert my .MOV videos to WMV so I can upload to my web site. However, with my new iPhone (iOS7), the vidoes are distorted due to aspect ratio issues. I'd like to set the output aspect ratio and.or file type when I create a new video on my iPhone 5s.

There is no user setting for this in the native iOS app. It is possible that if you use some other 3rd party app you can make some changes to that, but I'm not sure. There are also no settings for changing the file type on the phone itself.
I've not experienced any issues with distortion on mine, but it could be your converter. Have you tried another one?

Why does Compressor's HDV output look worse than iDVD's output of same?

Okay, here's the thing... for weekly updates I've been sending the client outputs via iDVD. And they've honestly looked great. The HDV footage fills the screen and doesn't show any noticeable compression funkiness. But for the screening of the completed first cut I wanted to deliver what I thought would be an even higher quality look (esp since I intended to deliver the completed project mpeg and AC3), so I exported the HDV cut out of FCP via QT and converted it with Compressor's DVD: Best Quality 90 minutes to turn the HDV into SD 720x480 16:9 letterboxed. I then burned it with DVDSP, complete with nice looking menus, etc. And I was shocked viewing the output. The two clips I'd reversed in FCP stuttered, and even a clip with nothing on it was strobing. Plus, close ups showed noticeable compression on the faces. So what gives? Why does it look so much better when I just slammed it out on iDVD? What don't I "get?" I've scoured the books I have and nothing seems to give me a clue.
Any direction would be greatly appreciated!

Lightroom uses its own raw converter and its own camera profiles to convert the raw data into an image. This will never be the same as the camera-manufacturer’s raw image decoding either in camera or using camera-manufacturer-supplied software or any other third-party software.
Here is a general explanation from a few years ago, that is mostly valid, with the one exception that there are no camera-matching profiles for your brand of camera:
http://www.lightroomforums.net/showthread.php?1285-Why-did-Lightroom-ruin-my-photo
The IDC is apparently using camera settings and is clearly sharpening the image and quashing some of the lens-flare, oversharpening in my opinion.
You can do these sorts of things in LR, too, but you have to tell it to do things, it won’t do this by default.
The 2010 and 2012 are related to Process Version not Profile, and one difference between the two PVs is how the toning responds to near clipping conditions. Your reds are very saturated and near if not actually clipping so it is not surprising that the two raw conversions are not the same.
Can you provide a link to the raw file, using DropBox.com or similar large-file-hosting-service and maybe someone will give some tips on how to make the LR processing closer to what you’re seeing with the camera-manufacturer version.?

XDCAM to HDV output to HVR25U

We have been producing content with the Sony Z1U, editing natively in FCP 6x, outputting to HDV tape with the Sony HVR25U that was sent to the DVD producer for SD DVD's. Maybe not the best workflow but worked moderately well.
Recently we replaced our Z1's with a couple EX3's and an EX1 and edited XDCAM natively in FCP. That worked great, unfortunately you can't export an XDCAM sequence to the M25U. So we exported an HDV Quicktime from the XDCAM sequence and then placed that Quicktine into an HDV sequence and tried to print to tape from there. The resulting Quicktime played fine in the timeline but it kept pausing/freezing in the M25U.
To get around this problem we copied the XDCAM timeline and pasted it into an HDV sequenced and then rendered AND THEN conformed for a print to video. It worked but this process took more than five hours for a fourty minute sequence.
Anyone else experience this? Any ideas why FCP would have any trouble printing to tape an HDV Quicktime that it generated from and XDCAM sequence?
We have 2.66MGHz Mac Pro's with 5GB RAM, served by a shared file system that is running about 280MB/s per work station.
Thanks in advance for any help.

its a 40 minute sequence and from the XDCAM time line I exported an HDV 1440x1080i 60 Quicktime which took about three hours to render. I then opened a new project with an HDV sequence and tried to print to tape from there.
When that didn't work I copied all from the XDCAM sequence and pasted it into an HDV time line rendered for about 2 hours and then conformed for at least another 2 hours but it did print to tape successfully.
I would have thought that the rendered self contained HDV Quicktime would print to tape without any difficulty.
In the past I have had this problem trying to print an HDV Quicktime to tape from a firewire attached Lacie, and thought it might be a fragmentation issue. But this Quicktime was stored on our shared file system via fiber channel. So I don't think this is a bandwidth issue but I'm at a lose on this.

NOOB Question - Cannot seem to get the output in a text or CSV file - Please help!!

I was able to put together a script which finds members of a certain AD group, filters down the users, and then calculates the number of days till a password reset is needed. I am able to get on screen exactly what i am looking for, but cannot seem
to figure out how to get the same data to a file. What i am doing wrong? two goals here:
1. Create a spreadsheet with a list of users whose password is about to expire.
2. Down the line automate an email to users whose password is about to expire.
Here is my code:
## Get List Of Users in Password Change Lockout that do not have an expired password or a password that never expires
$Names = (Get-ADGroupMember -Identity "Password Change Lockout" -Recursive |`
Get-ADUser -Properties * |`
Where-Object {$_.PasswordNeverExpires -eq $False -and $_.PasswordExpired -eq $False} |`
Sort-Object name |Select-Object -ExpandProperty SamAccountName)
## Get Password last Set values for all
Foreach ($Name in $Names)
$VAR1 = (Get-ADUserResultantPasswordPolicy -Identity $Name).MaxPasswordAge
$VAR2 = (Get-ADUser $Name -Properties *).passwordlastset
$VAR3 = (Get-ADUser $Name -Properties *).name
$DTPC = (New-TimeSpan -Start (Get-Date) -End ($VAR2 + $VAR1) | Select-Object -ExpandProperty Days)
Filter users to those who need to change thier password in 15 days.
If ($DTPC -lt 15)
No matter what i try between the {} after the If statement, I cannot get the output to a file. However, if I use a Write-Output I get exactly what i looking for. I feel like i am forgetting some basic concept and could really use some help. Thanks.
Matt
Matt Dillon

Hi Matt,
I generally create an empty array (something like $out = @()) at the top of the script and then use $out += $desiredOutput inside of the foreach loop.
Outside of the loop, you can then pipe $out to Out-File or Export-Csv, depending on your needs.
Don't retire TechNet! -
(Don't give up yet - 12,830+ strong and growing)

How to set input/output "use" attribute in the WSDL file of BPEL process?

Hello,
I have a BPEL process that I want to deploy it as an RPC web service. I want to access it from a Java module (via an automatic generated Java stub from the WSDL file exposed by the BPEL process).
I wrote manually the corresponding WSDL file for my BPEL process, where I stipulated for the operations exposed by my process ( in <soap:binding> tag) the value of the attribute "style" to "rpc". Also, for each <input> and <output> of the operations (inside the <operation> tag), I set manually the attributes "use" to the values "encoded". Something like this:
<operation name="getCustomers">
<soap:operation style="rpc" soapAction="getCustomers"/>
<input>
<soap:body use="encoded" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="Trial"/>
</input>
<output>
<soap:body use="encoded" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="Trial"/>
</output>
</operation>
The issue is that, when the BPEL process is built and deployed, the WSDL file generated automatically by BPEL (based on the one manually writen) set the values of the "use" attributes to "literal". This is what is generated:
<operation name="getCustomers">
<soap:operation style="rpc" soapAction="getCustomers" />
<input>
<soap:body use="literal" namespace="http://acm.org/samples" />
</input>
<output>
<soap:body use="literal" namespace="http://acm.org/samples" />
</output>
</operation>
Is there any chance to keep the original values (written by hand) for the "use attributes?
Many thanks in advance!
Regards,
Marinel

I am not sure I understand your question. If you want all your BPEL service to be rpc still by default, you can change the templates: C:\eclipse\plugins\bpelz_0.9.XXX\templates.
The BPEL PM engine support both style of invocation.
I hope this helps. -Edwin

Make the output of the BI report rtf file some fields non editable

Hello All,
I want to make some fields in the output of the BI report as editable and some non editable. Any output format is fine (PDF, RTF or HTML) Please let me know if anyone knows how to do it.
Thanks in advance..
Anu

You can add RTF to active allowed output type list (provided that your reporting system supports it) by going to CustomerReportExtensions.xml file and adding the following node right after ParameterTypes node:
<ActiveReportOutputTypes configChildKey="key">
<ActiveReportOutputType key="RTF" value="RTF" extension=".rtf"/>
</ActiveReportOutputTypes>

HDV output to 16:9 ratio QT file

Similar Messages

Maybe you are looking for