HDV Preset in greyed-out in New Project

My problem:
When I try to create a "New Project" in APPro CS3 and I click on HDV I am not allowed to enter a project name. The OK is greyed-out and the HDV Preset cannot be expanded.
(I understand it is recommended to always record in HDV even if I only burn SD DVD)
II do not have an HD camcorder connected to APPro CS3 via IEEE.
I am just going through the motions: Reading a remendous amount of information about capturing HDV in PPro CS3 before I buy a HD camcorder.
(I have PPro and Encore CS3 and have been NLE on DV for long time)).
My machine: P6T, Intel i7 920 @2.67GHz, 2.99 RAM, ATI RADEON HD 4600, Monitor HPw2007
I am assuming that:
1. If I correctly set my (future) HD camera to record HDV
2. If I do not DV-lock
3. If I used HDV tape, and so on, then would my APPro CS3 correct my problem?
I thank you
Kosmas

Kosmas,
Even with no HD material and no HD camera hooked up, you still should be able to select an HD Project Preset.
Since you are on Win7, this might not apply (seemed to be a Vista issue), but do you have Window Blinds installed? Earlier versions of that program have killed buttons in many Adobe programs.
Also, you do have the full-paid version installed, and not the trial, correct?
Unfortunately, those are my only thoughts, and I hope that others will have much more helpful info and suggestions for you.
Good luck,
Hunt

Similar Messages

Songs are greyed out on new iphone

I got a new iphone and a bunch of my songs are greyed out and I cannot play them.

More advanced security on a device as sophisticated as
an iPhone I can live with. This lack of functionality however
is for me a bit of a let down. Given how powerful the device and
it's os is I would have thought providing read only access to certain
files would not have been difficult. The same applies to
blocking the transfer of these files via any other mechanism
than iTunes. Please don't take this the wrong way, I am very
impressed with the iPhone. I was just frustrated when I sat down
in front of my laptop to find I could not plug in the phone and listen
to music via iTunes. This one function that make it dare I say it
keep pace with an mp3 player.

Indesign CC - All menu items greyed out on new install

Hello!
I just installed Indesign CC on a new Mac laptop (I can provide specs if needed), and when I open ID *all* menu items are greyed out. I can't create a new file, open legacy files, or even quit the app (force quit only). I have not installed any plugins. Other CC programs work fine.
Thank you for your time.
-FBF

Thank you for your response, Peter.
Replacing the preferences and savedData did not innitially work, but it did lead to a solution. I realized that I ported over my old mac to this new one from a backup, and there old versions of preferences from ID (even tho I had uninstalled the program). I cleaned out my preference and cache folders of old and new ID support files. ID then opened with no problem. Hopefully this will help anyone else who has this issue.
Thank you for your help!

"enable auto import" is greyed out in new cc

Previously, everytime I plugged in a SD card lightroom with automatically open up and start the import process. Since switching to CC, it isn't working this way, and the "enable auto import" is greyed out. How do I fix this?

I had this problem and I was able to fix it by editing the Windows registry (it was only a minor edit).
I changed the value of the following registry key:
HKEY_CLASSES_ROOT\Adobe.AdobeLightroom64\shell\open\command
The value was:
C:\Program Files\Adobe\Adobe Photoshop Lightroom 5.7\Lightroom.exe "%L"
I changed it to:
C:\Program Files\Adobe\Adobe Lightroom\lightroom.exe "%L"

My iphotos is grey out and new photos app in Mac is not working after update.

My iphotos and Photos app have stopped working after update today. I am getting this error message.
Process:
Photos [934]
Path:
/Applications/Photos.app/Contents/MacOS/Photos
Identifier:
com.apple.Photos
Version:
Build Info:
PhotoApp-209052000000000~4
Code Type:
X86-64 (Native)
Parent Process:
??? [1]
Responsible:
Photos [934]
User ID:
501
Date/Time:
2015-04-18 21:58:43.854 +0530
OS Version:
Mac OS X 10.10.3 (14D136)
Report Version:
11
Anonymous UUID:
90C1B836-26D6-7503-1EC1-7E9457501D0F
Time Awake Since Boot: 1400 seconds
Crashed Thread:
0
Exception Type:
EXC_BREAKPOINT (SIGTRAP)
Exception Codes:
0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: /System/Library/PrivateFrameworks/PhotoLibraryPrivate.framework/Versions/A/Fram eworks/PhotoLibraryServices.framework/Versions/A/PhotoLibraryServices
Referenced from: /Applications/Photos.app/Contents/MacOS/Photos
Reason: image not found
Binary Images:
0x7fff6b3a1000 -
0x7fff6b3d7837 dyld (353.2.1) <65DCCB06-339C-3E25-9702-600A28291D0E> /usr/lib/dyld

Library not loaded: /System/Library/PrivateFrameworks/PhotoLibraryPrivate.framework/Versions/A/Fram eworks/PhotoLibraryServices.framework/Versions/A/PhotoLibraryServices
Referenced from: /Applications/Photos.app/Contents/MacOS/Photos
Reason: image not found
There's a system component that 's missing that Photos is trying to use. You'll need to boot into the Recovery volume (boot with the Command + R keys held down) and reinstall the system.

HDV presets greyed out

I recently purchased CS3 and a Sony HDR-HC7. I recorded in HDV, have the camera set to play back in HDV, and I am connecting the camera with firewire. However, when I open a new project the HDV presets are greyed out. No HD custom settings are available either and I do not want to set up the project in DV format. Adobe On Location does recognize my camera although I have not tried capturing from this program. Researched Adobe and Sony and can not find any information. Can anyone assist me with this problem? Thanks.

I finally figured it out.
For anyone else that has this problem, even though you pay for your software up front, it is considered a "trial" version until you activate it. The trial version does not make HDV presets available.
ctiprod

Grey out Project/WBS number

Hi,
The Project definition/WBSE number in Project Systems is greyed out once the
project/WBSE is released. In that case, you could use activity type 45 for authorization objects C_PRPS* or C_PROJ* to provide authorization to change these numbers.
But, how do I grey out the PD/WBSE number immediately after the PD/WBSE is created? Can I do it through authorizations or a user status? I tried looking through the field selection for PD and WBS, but the PD and/or WBSE number are not part of the selections there. Any suggestion would be greatly helpful and rewarded through points.
Thanks!
Venkat.

Hi Satish,
With the validations you cannot get your requeriment only you can get this field cannot be editable ( but not greyed), due to valiations works after you are in the screen.
I am not sure how to get this, check WBS BAdi there is a method 'before save' I don't know if you can develop here to grey the field.
Regards,
Sara

Why is the Rollover Slidelet Greyed Out?

We just purchased Captivate 8 and We want to add a Rollover Slidelet but when I click "Objects" the "Rollover Slidelet" is greyed out. Can someone help with this?

It will be greyed out for responsive projects, because it is not supported for them. Same for rollover caption and image.

How do I import an existing finalised imovie into a new project either in part or full. The movie I want to import is filed under "movies" but greyed out when I go through the procedure in imovie 11

How do I import an existing finalised movie clip into a new developing project ? I go through the imovie 11 procedure for importing and the list of clips (finalised and un-finalised) appears, but always "greyed out" which makes it impossible to create anything. I have tried placing it on the desk top and dragging but this doesn't work either.

AppleMan Thanks very much for the information, however I could't make it work. I followed your instructions to the letter, in fact I tried every which-way. I created a dedicated file into which I copied and pasted the project from "package contents" but it was still greyed out when I went to retrieve it. I also found that the file size was reduced to only a few Kb. Any further step-by-step instructions would be appreciated as I am obviously doing something wrong. Babowa It appears that in imovie everything has to be "finalised" before it can be used or shared elsewhere in the same way as a disk has to be to be played elsewhere. Funnily enough an MOV file I converted to Mp4 was not greyed out and I was able to import it.... an exercise I am not keen on because of resolution loss during conversion

Why is Import Video greyed out for a new Flash project?

I have been trying unsuccessfully to load any MP4 (H.264 encoding), FLV, or F4V files into a brand new project. I've tried importing FLV and F4V files via the Import to Library and Import to Stage menu choices but all result in "One or more files were not imported because there were problems reading them" error message. I just downloaded Flash CC today (Feb 23, 2014) and cannot even get started on my project since I cannot seem to load a video into the library or stage. I've looked at the tutorials, but they assume that I can choose the greyed out Import Video... menu choice. Searching the discussion didn't help me as most of the discussions are off-topic or from 2 or more years back.
Thanks,
Xtraspatial

Thank you sinious. I had QT 7.5.5 installed. The problem was unrelated. Like a bufoon, I created a new HTML5 canvas, which is unable to import videos. When I switched to a AS3 canvas all was as it should be. And there was rejoicing throughout the land! Case closed.

How do I share a new project on imovie if the export option is greyed out and not an option?

how do I share a new project on imovie if the export option is greyed out and not an option?

nicoleking wrote:
... I heard that if you bring in your old iPhone, they will give you a new one with some kind of fee, but I don't know how that works.
https://discussions.apple.com/message/22920500

I would like to use GarageBand to remaster downloaded music files that are in iTunes. Poorly mastered files keep clipping and damaging my speakers. When I try to use an iTunes file as a new project, it greys out the iTunes songs so I can't select them.

I would like to use GarageBand to remaster downloaded music files that are in iTunes. Poorly mastered files keep clipping and damaging my speakers. When I try to use an iTunes file as a new project, it greys out the iTunes songs so I can't select them. Any ideas?

As I said - look whether your original file is damaged or not. If not, I wouldn't change it and find out what in your system makes it sound like it's clipping.
Good sound file, with volume maxed out. No need to change anything.
The same song clipped - no chance to repair.

EPT on New project option at project center are all Greyed out

Hello,
We have a problem with only 2 users within the PWA. They can not create new projects. When they click the New button on the project center, all EPTs are gray.
We think it was a issue with the permissions. So, we removed all the groups from the users and assign again, but the problem persisted. For other users with the same permission there are no problems.
Furthermore, we tested with the same user on other computers, and the problem persists. We believe it's tied to the user.
We are using Project Server 2010.
If more information is needed, please let me know.
Tks!

Hi Alessandro,
If it was an issue about the permissions, the "new" button would be greyed out preventing users to click on it and seeing the EPT list. If they can click on "new" but only the EPTs are greyed out, then it is another issue..
Are the users part of a department? Have you associated EPT with departments?
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

I do not have the hdv option in the new project menu

Hello all as my title says I do not not have the hdv option in my new project menu. I have tried reinstalling and that did not work. Also I do own the software.

Welcome to the forum.
Check two things first:
When you go to Help>Transfer Activation, do you have that option, or is it grayed out?
Look at Export Settings, and do you have any HD Export settings?
If you do not have the Transfer Activation, or do not have the HD Export settings, then you full-paid version has likely reverted to the trial.
This was somewhat common with updates to CS4, but much more rare with CS5.
If your full-paid version HAS reverted, then follow these steps:
If possible Deactivate (probably cannot do this)
Uninstall PrPro
Download and run the Adobe Cleanup Utility CS5 several times, rebooting between each run
Install PrPro CS5
Immediately update to the latest version, before launch
Launch and test
Did that bring the Presets back?
Good luck
Hunt

Unlink Audio & Video greyed out in Premeire Elements 13 (Windows 8.1) [new user]

I posted (or at least I thought the post worked) this question Mar.27th but I can't find it or any replies I may have gotten so if anyone knows its whereabouts I'd appreciate you're telling me how to see it so I won't have 2 threads running for the same question. My question is: why is the option to unlink the audio and video tracks greyed out when I'm trying to substitute part of an audio clip (without ruining the synchronization between the existing audio and video). I'm working with a saved "projectX.prel" file. I noticed when I opened a new project that the UNLINK option is active. This seems contrary to logic i.e wouldn't the unlink action be more likely to be needed when working on an existing file as opposed to when working on a brand new file? How can I separate the 2 components (audio & video) so I can edit just the audio clip without the UNLINK procedure working? Would really appreciate any help anyone can offer with any of the foregoing. Thanks.

garryw
Thanks for the reply. Glad that suggestion C worked for you.
Is there any remote possibility that the video and audio are really unlinked to start.
Let us take suggestion A, you say that Link Audio and Video is active choice for what you believe to a linked video audio on the Timeline.
You have your clip in the Expert workspace and the clip is not selected as represented in screenshot 1.
If you click on the Video 1 portion of the clip, does the video portion and audio portion highlight to look like what you see in screenshot 2
where the video and audio portion both look highlighted.
Or, if you click on the Video 1 portion of the clip, is it just the video portion that looks highlighted and the audio part
continues to look unhighlighted? As seen in the next screenshot 3?
Depending on your answers, we may next delete the Adobe Premiere Elements Prefs file which can be found
Local Disk C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements
13.0
and in the 13.0 Folder is the Adobe Premiere Elements Prefs file which you delete. If that does not work, then delete the whole 13.0 Folder in which the Adobe Premiere Elements Prefs file exists. Be sure to be working with Folder Option Show Hidden Files, Folders, and Drives enabled so that you can see the complete path given.
As your schedule permits, looking forward to learning of your progress.
Thanks.
ATR

HDV Preset in greyed-out in New Project

Similar Messages

Maybe you are looking for