*** HDV print to video stutters and never gets going.
I'm working in HDV and trying to print my project to video and am having absolutely no success. I've checked and my camera IS connected. I conformed to HDV before choosing file>print to video and then DID to the latter.
When I press record on my camera and return on the keyboard it looks like it starts going, but the minute my sequence starts playing the time on the camera starts and stops and nothing gets printed to the tape.
Can anyone suggest what to do here? I really need to print this project back to tape.......
Thanks in advance!
I would say yes set the camera to HDV recording, and many times the ilink setting is not set to HDV so the signal is coming to the camera in HDV but the camera is set to and looking for DV.
You control the ilink/firewire port manually on the Z1, however any changes must be made while the FW cable is disconnected.
Try this, turn off the camera, disconnect the FW cable, turn on the camera in VTR mode, open the menu to Rec In/Out, find i-link conv and set to OFF for HDV (or ON for DV), then back out of the menu and turn off the camera and connect the FW cable, and turn it back on. By turning off the camera it will insure safe FW connections so there is not possibility of shorting this port.
These step will properly set the deck up to receive HDV.
Good Luck
Z1
Similar Messages
-
Hdv print to video not working
Hi,
I am trying to print to video an HDV sequence, at HDV quality but neither my Macbook Pro nor G5 will see my Sony HVR10P or Canon XHA1. It is true that Final Cut Supports output to HDV decks using Print to Video yes? I can see the HDV Firewire 1440 setting in the External Video menu but it is greyed out.
On both the Camera and Deck I've tried all the different settings to get an HDV input signal, but to no avail. I'm also not getting a DV signal to tape using print to video. I can get the still image of the current frame though.
From what I've read this is supposed to be possible... does anyone have any suggestions? Going a bit nuts here after a couple of days,
thanks,
samFinally I've cracked it. There are a host of alternative HDV firewire setting in the Audio Video Settings. I was using the Sony HDV firewire setting which it defaulted to after recognising the Sony HDR10P deck. After trying HDV Firewire Basic and NDF to Print to Video there was no warning window "incompatible device" or "this sequence is not copmpatible with HDV Print to Video". It played through with a 2 second delay. However it wasn't stable - a large glitch at the beginning of the recording and no audio came through. Then tweaked to HDV Firewire 25fps Basic and it kept coming up with "run out of memory" just after conforming. It seems it IS possible but my systems are having teething problems and I should upgrade to FCP 6 - hopefully memory issues will be resolved there.
Thanks..
sam -
One of my clients is having a problem trying the Print to Video an HDV sequence.
The workflow is to capture their HDV clips as DVCPRO HD via an Aja Kona LHe, edit in DVCPRO HD, then send the project to another facility that has an HDCAM deck for mastering to tape. However, for their first edit, they've created the pilot show, and they want to use it to get more program sponsors. Their only option is to use their Sony HMV-M25U HDV deck and an HD monitor to show the pilot to prospective sponsors.
To do that, they now have to output the pilot show to HDV. They've copied the DVCPRO HD sequence into an HDV timeline and rendered and conformed it. But when they go to Print to Video, they get this error message:
"Unable to perform print to video operation for HDV as
RT Extreme is not supported. Improved CPU Speed
and/or RAM needed to enable RT Extreme and HDV print
to video."
They have a Quad 3GHz MacPro with 4GB RAM, and the Scratch Disk is a 2-way RAID stripe using two of their four internal SATA drives striped together. The boot volume is on a separate drive.
They are using Mac OS X v10.4.8, QT 7.1.3, and FCP 5.1.4.
I don't have an HDV deck to try to duplicate their situation, so I need your help. If you've done HDV and experienced this error message, what is the solution?
They also have received these error messages:
"The sequence is not compatible w/HDV print to video."
"Incompatible settings. You may have attempted to
output a clip w/compression settings that do not match
the current output settings. Try nesting the clip in
a sequence w/the correct settings."
Both those messages would seem to indicate their setting are messed up.
They are 1,000 miles from me, so I can't see their FCP and deck settings. They swear that the sequence is an HDV 1080i60 sequence and that the deck is set to record HDV.
HELP.OK, I have discovered the problem, and it's a doozy.
Her HDV sequence was set for 1280 X 1080, HDV 1080 Compressor, rather than 1440 X 1080. We have no clue how that happened, but it did.
Here's what I had her do last night when she was creating it: She changed the Easy Setup to HDV 1080i60, then created a new sequence. Then she went to the original DVCPRO HD sequence and did a Command-C to copy, then back to the new HDV 1080i60 sequence and Command-V to paste.
This morning, after I discovered the 1280 problem, I did the exact same steps and the new sequence was 1440 X 1080 HDV. I called her and had her do the exact same thing again, and now that new sequence is 1440 X 1080 HDV.
She is now rendering and conforming. I had her make sure ALL of the render bars were checked in Sequence > Render All, and that she chose Both audio and video. This should do it.
Now, the really tough part. I've got to re-read the thread and choose only two Helpful posts. Why can't we have as many as we need?????? -
I uninstalled Adobe Air and Adobe Reader and now I cannot reinstall them on the Adobe web site. I go thru the steps on Adobe site and never get a popup to RUN any programs.
Then there is something seriously wrong with either your
browser
Windows
Internet connection
I have just downloaded that installer (on Windows 7, using Pale Moon), and the download completed within less than 10 seconds. And I am some 10,000km away from the Adobe download servers.
Can you try a different browser?
Can you download anything to your computer, e.g. from Microsoft? -
Revision: 10085
Author: [email protected]
Date: 2009-09-09 07:39:54 -0700 (Wed, 09 Sep 2009)
Log Message:
Fixing video width and height getting reset when there's no true dimensional change reported by 'onMetaData'.
Modified Paths:
osmf/trunk/framework/MediaFramework/org/openvideoplayer/video/VideoElement.ashi their i have tried your last code but their is a problem with it on my pc that when i click the send video button it gives the error related to vector,
Vector deviceList = CaptureDeviceManager.getDeviceList()
di = (CaptureDeviceInfo)deviceList.firstElement();
returns zero.
please help my email address is [email protected]
kindly send me an email regarding the solution of my problem. i am using 'creative web cam' over XP windows. -
Thread get struck and never get released
Hi
We are using Weblogic 8.1 SP 1, (Patch CR134364 applied). Thread get struck and never get released. Do any one faced this problem?
Full thread dump Java HotSpot(TM) Client VM (1.4.1_03-b02 mixed mode):
"LDAPCache-TTLTimer" daemon prio=5 tid=0x5662BE28 nid=0x7b8 in Object.wait() [5301f000..5301fd88]
at java.lang.Object.wait(Native Method)
at netscape.ldap.TTLTimer.run(LDAPCache.java:806)
- locked <1671AB50> (a netscape.ldap.TTLTimer)
at java.lang.Thread.run(Thread.java:536)
"LDAPCache-TTLTimer" daemon prio=5 tid=0x5380A940 nid=0x928 in Object.wait() [52fdf000..52fdfd88]
at java.lang.Object.wait(Native Method)
at netscape.ldap.TTLTimer.run(LDAPCache.java:806)
- locked <08A437F0> (a netscape.ldap.TTLTimer)
at java.lang.Thread.run(Thread.java:536)
"LDAPCache-TTLTimer" daemon prio=5 tid=0x567D5D88 nid=0xb74 in Object.wait() [5311f000..5311fd88]
at java.lang.Object.wait(Native Method)
at netscape.ldap.TTLTimer.run(LDAPCache.java:806)
- locked <0D4F7D00> (a netscape.ldap.TTLTimer)
at java.lang.Thread.run(Thread.java:536)
"LDAPCache-TTLTimer" daemon prio=5 tid=0x56798660 nid=0x858 in Object.wait() [530df000..530dfd88]
at java.lang.Object.wait(Native Method)
at netscape.ldap.TTLTimer.run(LDAPCache.java:806)
- locked <1671AB38> (a netscape.ldap.TTLTimer)
at java.lang.Thread.run(Thread.java:536)
"LDAPConnThread dc02.ameriquest.net:389" daemon prio=5 tid=0x537AB9D0 nid=0x90c runnable [5305f000..5305fd88]
at java.net.SocketInputStream.socketRead0(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:129)
at java.io.BufferedInputStream.fill(BufferedInputStream.java:183)
at java.io.BufferedInputStream.read(BufferedInputStream.java:201)
- locked <1671B420> (a java.io.BufferedInputStream)
at netscape.ldap.ber.stream.BERElement.getElement(BERElement.java:101)
at netscape.ldap.LDAPConnThread.run(LDAPConnThread.java:420)
"LDAPConnThread dc02.ameriquest.net:389" daemon prio=5 tid=0x5682CE70 nid=0x2a0 runnable [55f000..55fd88]
at java.net.SocketInputStream.socketRead0(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:129)
at java.io.BufferedInputStream.fill(BufferedInputStream.java:183)
at java.io.BufferedInputStream.read(BufferedInputStream.java:201)
- locked <1671BD00> (a java.io.BufferedInputStream)
at netscape.ldap.ber.stream.BERElement.getElement(BERElement.java:101)
at netscape.ldap.LDAPConnThread.run(LDAPConnThread.java:420)
"ExecuteThread: '2' for queue: 'weblogic.kernel.Non-Blocking'" daemon prio=5 tid=0x5671B410 nid=0xa44 in Object.wait() [5574f000..5574fd88]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <1479A770> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '1' for queue: 'weblogic.kernel.Non-Blocking'" daemon prio=5 tid=0x61CCEEB0 nid=0xa38 in Object.wait() [5570f000..5570fd88]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <1479A7E8> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '0' for queue: 'weblogic.kernel.Non-Blocking'" daemon prio=5 tid=0x567AAEB0 nid=0x350 in Object.wait() [51f000..51fd88]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <1479A860> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"LDAPConnThread dc02.ameriquest.net:389" daemon prio=5 tid=0x56557C20 nid=0x9ac runnable [5309f000..5309fd88]
at java.net.SocketInputStream.socketRead0(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:129)
at java.io.BufferedInputStream.fill(BufferedInputStream.java:183)
at java.io.BufferedInputStream.read(BufferedInputStream.java:201)
- locked <11A34BC8> (a java.io.BufferedInputStream)
at netscape.ldap.ber.stream.BERElement.getElement(BERElement.java:101)
at netscape.ldap.LDAPConnThread.run(LDAPConnThread.java:420)
"LDAPConnThread dc02.ameriquest.net:389" daemon prio=5 tid=0x565CEC20 nid=0xafc runnable [4df000..4dfd88]
at java.net.SocketInputStream.socketRead0(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:129)
at java.io.BufferedInputStream.fill(BufferedInputStream.java:183)
at java.io.BufferedInputStream.read(BufferedInputStream.java:201)
- locked <11A36668> (a java.io.BufferedInputStream)
at netscape.ldap.ber.stream.BERElement.getElement(BERElement.java:101)
at netscape.ldap.LDAPConnThread.run(LDAPConnThread.java:420)
"ListenThread.Default" prio=5 tid=0x52F69CA0 nid=0x694 runnable [5567f000..5567fd88]
at java.net.PlainSocketImpl.socketAccept(Native Method)
at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:353)
- locked <081E7F68> (a java.net.PlainSocketImpl)
at java.net.ServerSocket.implAccept(ServerSocket.java:448)
at java.net.ServerSocket.accept(ServerSocket.java:419)
at weblogic.socket.WeblogicServerSocket.accept(WeblogicServerSocket.java:24)
at weblogic.t3.srvr.ListenThread.accept(ListenThread.java:715)
at weblogic.t3.srvr.ListenThread.run(ListenThread.java:291)
"Thread-8" prio=5 tid=0x5334DC38 nid=0x92c in Object.wait() [5563f000..5563fd88]
at java.lang.Object.wait(Native Method)
at java.util.TimerThread.mainLoop(Timer.java:429)
- locked <07F5E6E8> (a java.util.TaskQueue)
at java.util.TimerThread.run(Timer.java:382)
"Thread-7" prio=5 tid=0x5327A498 nid=0x23c waiting for monitor entry [555ff000..555ffd88]
at oracle.jdbc.driver.OraclePreparedStatement.clearParameters(OraclePreparedStatement.java:3622)
- waiting to lock <0C516F90> (a oracle.jdbc.driver.OraclePreparedStatement)
at weblogic.jdbc.common.internal.ConnectionEnv.cleanUpStatementForReUse(ConnectionEnv.java:1024)
at weblogic.jdbc.common.internal.ConnectionEnv.returnCachedStatement(ConnectionEnv.java:829)
at weblogic.jdbc.wrapper.Statement.internalClose(Statement.java:263)
at weblogic.jdbc.wrapper.Connection.closeAllStatements(Connection.java:251)
at weblogic.jdbc.wrapper.Connection.closeAllStatements(Connection.java:239)
at weblogic.jdbc.wrapper.PoolConnection.doClose(PoolConnection.java:146)
at weblogic.jdbc.wrapper.Connection.forcedCleanup(Connection.java:111)
at weblogic.common.resourcepool.ResourcePoolImpl.timeoutInactiveResources(ResourcePoolImpl.java:1643)
at weblogic.common.resourcepool.ResourcePoolImpl.access$400(ResourcePoolImpl.java:28)
at weblogic.common.resourcepool.ResourcePoolImpl$ResourcePoolMaintanenceTask.run(ResourcePoolImpl.java:1888)
at java.util.TimerThread.mainLoop(Timer.java:432)
at java.util.TimerThread.run(Timer.java:382)
"Thread-6" daemon prio=5 tid=0x52F01D98 nid=0x1ec in Object.wait() [555bf000..555bfd88]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:426)
at java.util.TimerThread.mainLoop(Timer.java:403)
- locked <07EB2F18> (a java.util.TaskQueue)
at java.util.TimerThread.run(Timer.java:382)
"weblogic.health.CoreHealthMonitor" daemon prio=5 tid=0x53396118 nid=0xa0c waiting on condition [5557f000..5557fd88]
at java.lang.Thread.sleep(Native Method)
at weblogic.t3.srvr.CoreHealthMonitorThread.run(CoreHealthMonitorThread.java:124)
"Thread-5" prio=5 tid=0x533AB648 nid=0x7c8 in Object.wait() [5553f000..5553fd88]
at java.lang.Object.wait(Native Method)
at java.util.TimerThread.mainLoop(Timer.java:429)
- locked <07D0EB90> (a java.util.TaskQueue)
at java.util.TimerThread.run(Timer.java:382)
"ExecuteThread: '0' for queue: 'Multicast'" daemon prio=5 tid=0x5337AF20 nid=0x918 in Object.wait() [554ff000..554ffd88]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <07CE3030> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"NodeManagerAgent" prio=5 tid=0x52F71CE8 nid=0x938 runnable [554bf000..554bfd88]
at java.net.SocketInputStream.socketRead0(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:129)
at java.net.SocketInputStream.read(SocketInputStream.java:182)
at weblogic.utils.io.ChunkedInputStream.read(ChunkedInputStream.java:122)
at com.certicom.tls.record.Util.readUInt8(Unknown Source)
at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
at com.certicom.tls.record.ReadHandler.read(Unknown Source)
- locked <07C90EF8> (a com.certicom.tls.record.ReadHandler)
at sun.nio.cs.StreamDecoder$CharsetSD.readBytes(StreamDecoder.java:408)
at sun.nio.cs.StreamDecoder$CharsetSD.implRead(StreamDecoder.java:448)
at sun.nio.cs.StreamDecoder.read(StreamDecoder.java:182)
- locked <065E61B8> (a java.io.InputStreamReader)
at java.io.InputStreamReader.read(InputStreamReader.java:167)
at java.io.BufferedReader.fill(BufferedReader.java:136)
at java.io.BufferedReader.readLine(BufferedReader.java:299)
- locked <065E61B8> (a java.io.InputStreamReader)
at java.io.BufferedReader.readLine(BufferedReader.java:362)
at weblogic.nodemanager.internal.NMMessage.receive(NMMessage.java:109)
at weblogic.nodemanager.wlscontrol.NodeManagerCommandListener.readInputCommand(NodeManagerCommandListener.java:131)
at weblogic.nodemanager.wlscontrol.NodeManagerCommandListener.run(NodeManagerCommandListener.java:60)
"Thread-4" prio=5 tid=0x52E59E80 nid=0xb50 in Object.wait() [5547f000..5547fd88]
at java.lang.Object.wait(Native Method)
- waiting on <07C0A878> (a java.util.TaskQueue)
at java.lang.Object.wait(Object.java:426)
at java.util.TimerThread.mainLoop(Timer.java:403)
- locked <07C0A878> (a java.util.TaskQueue)
at java.util.TimerThread.run(Timer.java:382)
"LDAPConnThread 192.168.32.60:4001" daemon prio=5 tid=0x535B4738 nid=0x9f4 runnable [5543f000..5543fd88]
at java.net.SocketInputStream.socketRead0(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:129)
at java.io.BufferedInputStream.fill(BufferedInputStream.java:183)
at java.io.BufferedInputStream.read(BufferedInputStream.java:201)
- locked <07BBFAA8> (a java.io.BufferedInputStream)
at netscape.ldap.ber.stream.BERElement.getElement(BERElement.java:101)
at netscape.ldap.LDAPConnThread.run(LDAPConnThread.java:420)
"VDE Transaction Processor Thread" prio=2 tid=0x53506AC0 nid=0xa04 in Object.wait() [553ff000..553ffd88]
at java.lang.Object.wait(Native Method)
- waiting on <07B74C80> (a com.octetstring.vde.backend.standard.TransactionProcessor)
at java.lang.Object.wait(Object.java:426)
at com.octetstring.vde.backend.standard.TransactionProcessor.waitChange(TransactionProcessor.java:355)
- locked <07B74C80> (a com.octetstring.vde.backend.standard.TransactionProcessor)
at com.octetstring.vde.backend.standard.TransactionProcessor.run(TransactionProcessor.java:215)
"ExecuteThread: '2' for queue: 'weblogic.admin.RMI'" daemon prio=5 tid=0x531E0C80 nid=0x670 in Object.wait() [553bf000..553bfd88]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <079BF888> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '1' for queue: 'weblogic.admin.RMI'" daemon prio=5 tid=0x52E0D6F8 nid=0xb54 in Object.wait() [5537f000..5537fd88]
at java.lang.Object.wait(Native Method)
- waiting on <079BF380> (a weblogic.kernel.ExecuteThread)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <079BF380> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '0' for queue: 'weblogic.admin.RMI'" daemon prio=5 tid=0x5367FA50 nid=0x68c in Object.wait() [5533f000..5533fd88]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <079BEE58> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '4' for queue: 'weblogic.socket.Muxer'" daemon prio=5 tid=0x536DD340 nid=0xb90 runnable [552ff000..552ffd88]
at weblogic.socket.NTSocketMuxer.getIoCompletionResult(Native Method)
at weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:85)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:32)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
"ExecuteThread: '3' for queue: 'weblogic.socket.Muxer'" daemon prio=5 tid=0x536E2DE0 nid=0xab0 runnable [552bf000..552bfd88]
at weblogic.socket.NTSocketMuxer.getIoCompletionResult(Native Method)
at weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:85)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:32)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
"ExecuteThread: '2' for queue: 'weblogic.socket.Muxer'" daemon prio=5 tid=0x536E23F0 nid=0xb48 runnable [5527f000..5527fd88]
at weblogic.socket.NTSocketMuxer.getIoCompletionResult(Native Method)
at weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:85)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:32)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
"ExecuteThread: '1' for queue: 'weblogic.socket.Muxer'" daemon prio=5 tid=0x536DFA90 nid=0x77c runnable [5523f000..5523fd88]
at weblogic.socket.NTSocketMuxer.getIoCompletionResult(Native Method)
at weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:85)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:32)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
"ExecuteThread: '0' for queue: 'weblogic.socket.Muxer'" daemon prio=5 tid=0x536DC928 nid=0xb58 runnable [551ff000..551ffd88]
at weblogic.socket.NTSocketMuxer.getIoCompletionResult(Native Method)
at weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:85)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:32)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
"weblogic.security.SpinnerRandomSource" daemon prio=5 tid=0x536D5990 nid=0x9f0 in Object.wait() [54d8f000..54d8fd88]
at java.lang.Object.wait(Native Method)
- waiting on <078B9F48> (a java.lang.Object)
at java.lang.Object.wait(Object.java:426)
at weblogic.security.SpinnerRandomBitsSource.run(SpinnerRandomBitsSource.java:60)
- locked <078B9F48> (a java.lang.Object)
at java.lang.Thread.run(Thread.java:536)
"weblogic.time.TimeEventGenerator" daemon prio=9 tid=0x536D2238 nid=0x69c in Object.wait() [54d4f000..54d4fd88]
at java.lang.Object.wait(Native Method)
at weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:271)
- locked <078AF4C0> (a weblogic.time.common.internal.TimeTable)
at weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.java:118)
at java.lang.Thread.run(Thread.java:536)
"ExecuteThread: '4' for queue: 'weblogic.kernel.System'" daemon prio=5 tid=0x536D0648 nid=0xa40 in Object.wait() [54d0f000..54d0fd88]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <078AEC78> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '3' for queue: 'weblogic.kernel.System'" daemon prio=5 tid=0x536CF9F0 nid=0x664 in Object.wait() [54ccf000..54ccfd88]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <078AE7E8> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '2' for queue: 'weblogic.kernel.System'" daemon prio=5 tid=0x536CED98 nid=0x9b0 in Object.wait() [54c8f000..54c8fd88]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <078AE358> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '1' for queue: 'weblogic.kernel.System'" daemon prio=5 tid=0x536CE140 nid=0x9a4 in Object.wait() [54c4f000..54c4fd88]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <078ADEC8> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '0' for queue: 'weblogic.kernel.System'" daemon prio=5 tid=0x536CDCF8 nid=0xa5c in Object.wait() [54c0f000..54c0fd88]
at java.lang.Object.wait(Native Method)
- waiting on <078ADA20> (a weblogic.kernel.ExecuteThread)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <078ADA20> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '34' for queue: 'weblogic.kernel.Default'" daemon prio=5 tid=0x536CC7B0 nid=0x684 runnable [54bcf000..54bcfd88]
at java.net.PlainDatagramSocketImpl.receive(Native Method)
at java.net.DatagramSocket.receive(DatagramSocket.java:680)
- locked <036BC240> (a java.net.DatagramPacket)
- locked <07EA5528> (a java.net.MulticastSocket)
at weblogic.cluster.FragmentSocket.receive(FragmentSocket.java:169)
at weblogic.cluster.MulticastManager.execute(MulticastManager.java:377)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
"ExecuteThread: '33' for queue: 'weblogic.kernel.Default'" daemon prio=5 tid=0x536CB340 nid=0x9b8 runnable [54b8e000..54b8fd88]
at java.net.SocketInputStream.socketRead0(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:129)
at oracle.net.ns.Packet.receive(Unknown Source)
at oracle.net.ns.DataPacket.receive(Unknown Source)
at oracle.net.ns.NetInputStream.getNextPacket(Unknown Source)
at oracle.net.ns.NetInputStream.read(Unknown Source)
at oracle.net.ns.NetInputStream.read(Unknown Source)
at oracle.net.ns.NetInputStream.read(Unknown Source)
at oracle.jdbc.ttc7.MAREngine.unmarshalUB1(MAREngine.java:931)
at oracle.jdbc.ttc7.MAREngine.unmarshalSB1(MAREngine.java:893)
at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:375)
at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1894)
at oracle.jdbc.ttc7.TTC7Protocol.fetch(TTC7Protocol.java:1199)
- locked <07F4DBD8> (a oracle.jdbc.ttc7.TTC7Protocol)
at oracle.jdbc.driver.OracleStatement.doExecuteQuery(OracleStatement.java:2512)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2840)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:608)
- locked <0C516F90> (a oracle.jdbc.driver.OraclePreparedStatement)
- locked <07F4DC48> (a oracle.jdbc.driver.OracleConnection)
at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:536)
- locked <0C516F90> (a oracle.jdbc.driver.OraclePreparedStatement)
- locked <07F4DC48> (a oracle.jdbc.driver.OracleConnection)
at weblogic.jdbc.wrapper.PreparedStatement.executeQuery(PreparedStatement.java:80)
at tavant.app.wolf.appraisal.dao.LoanDAO.getAllOrderHistory(LoanDAO.java:216)
at tavant.app.wolf.appraisal.business.sessionejbs.ResolveSessionFacadeBean.getValuationHistoryData(ResolveSessionFacadeBean.java:459)
at tavant.app.wolf.appraisal.business.sessionejbs.ResolveSessionFacadeBean_r2meeg_EOImpl.getValuationHistoryData(ResolveSessionFacadeBean_r2meeg_EOImpl.java:216)
at tavant.app.wolf.appraisal.business.webservices.AppraisalWsImpl.getValuationHistoryData(AppraisalWsImpl.java:139)
at tavant.app.wolf.appraisal.business.webservices.CorpAppraisalEngineSoapBindingImpl.getValuationHistoryData(CorpAppraisalEngineSoapBindingImpl.java:27)
at sun.reflect.GeneratedMethodAccessor178.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.apache.axis.providers.java.RPCProvider.invokeMethod(RPCProvider.java:383)
at org.apache.axis.providers.java.RPCProvider.processMessage(RPCProvider.java:291)
at org.apache.axis.providers.java.JavaProvider.invoke(JavaProvider.java:330)
at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:71)
at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:150)
at org.apache.axis.SimpleChain.invoke(SimpleChain.java:120)
at org.apache.axis.handlers.soap.SOAPService.invoke(SOAPService.java:475)
at org.apache.axis.server.AxisServer.invoke(AxisServer.java:323)
at org.apache.axis.transport.http.AxisServlet.doPost(AxisServlet.java:854)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at org.apache.axis.transport.http.AxisServletBase.service(AxisServletBase.java:339)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1053)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:387)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6310)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3622)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2569)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
"ExecuteThread: '32' for queue: 'weblogic.kernel.Default'" daemon prio=5 tid=0x536CA6E8 nid=0x66c runnable [54b4e000..54b4fd88]
at java.net.SocketInputStream.socketRead0(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:129)
at oracle.net.ns.Packet.receive(Unknown Source)
at oracle.net.ns.DataPacket.receive(Unknown Source)
at oracle.net.ns.NetInputStream.getNextPacket(Unknown Source)
at oracle.net.ns.NetInputStream.read(Unknown Source)
at oracle.net.ns.NetInputStream.read(Unknown Source)
at oracle.net.ns.NetInputStream.read(Unknown Source)
at oracle.jdbc.ttc7.MAREngine.unmarshalUB1(MAREngine.java:931)
at oracle.jdbc.ttc7.MAREngine.unmarshalSB1(MAREngine.java:893)
at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:375)
at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1894)
at oracle.jdbc.ttc7.TTC7Protocol.fetch(TTC7Protocol.java:1199)
- locked <07F52838> (a oracle.jdbc.ttc7.TTC7Protocol)
at oracle.jdbc.driver.OracleStatement.doExecuteQuery(OracleStatement.java:2512)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2840)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:608)
- locked <176922E0> (a oracle.jdbc.driver.OraclePreparedStatement)
- locked <07F528A8> (a oracle.jdbc.driver.OracleConnection)
at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:536)
- locked <176922E0> (a oracle.jdbc.driver.OraclePreparedStatement)
- locked <07F528A8> (a oracle.jdbc.driver.OracleConnection)
at weblogic.jdbc.wrapper.PreparedStatement.executeQuery(PreparedStatement.java:80)
at tavant.app.wolf.cdm.AppraisalOrdersBean_1vds1s__WebLogic_CMP_RDBMS.ejbFindByPrimaryKey(AppraisalOrdersBean_1vds1s__WebLogic_CMP_RDBMS.java:3743)
at sun.reflect.GeneratedMethodAccessor285.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.findByPrimaryKey(RDBMSPersistenceManager.java:234)
at weblogic.ejb20.manager.BaseEntityManager.findByPrimaryKey(BaseEntityManager.java:1428)
at weblogic.ejb20.manager.BaseEntityManager.localFindByPrimaryKey(BaseEntityManager.java:1384)
at weblogic.ejb20.internal.EntityEJBLocalHome.findByPrimaryKey(EntityEJBLocalHome.java:264)
at tavant.app.wolf.cdm.AppraisalOrdersBean_1vds1s_LocalHomeImpl.findByPrimaryKey(AppraisalOrdersBean_1vds1s_LocalHomeImpl.java:205)
at tavant.app.wolf.cdmal.appraisal.sessionejbs.OrderALSessionBean.getOrderforCheckStatus(OrderALSessionBean.java:1519)
at tavant.app.wolf.cdmal.appraisal.sessionejbs.OrderALSessionBean_vmnknu_EOImpl.getOrderforCheckStatus(OrderALSessionBean_vmnknu_EOImpl.java:952)
at tavant.app.wolf.appraisal.business.sessionejbs.OrderSessionFacadeBean.CheckOrderStatus(OrderSessionFacadeBean.java:1265)
at tavant.app.wolf.appraisal.business.sessionejbs.OrderSessionFacadeBean_d5o7z0_EOImpl.CheckOrderStatus(OrderSessionFacadeBean_d5o7z0_EOImpl.java:46)
at tavant.app.wolf.appraisal.web.delegate.OrderManagementDelegate.checkOrderStatus(OrderManagementDelegate.java:193)
at tavant.app.wolf.appraisal.resolve.web.actions.UpdatePropertyValuationDetailsAction.checkStatus(UpdatePropertyValuationDetailsAction.java:66)
at sun.reflect.GeneratedMethodAccessor1289.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
at org.apache.struts.actions.LookupDispatchAction.execute(LookupDispatchAction.java:252)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:480)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1420)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:520)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1053)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:387)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6310)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3622)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2569)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
"ExecuteThread: '31' for queue: 'weblogic.kernel.Default'" daemon prio=5 tid=0x536C9A90 nid=0xa28 in Object.wait() [54b0f000..54b0fd88]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <078ABBA8> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '30' for queue: 'weblogic.kernel.Default'" daemon prio=5 tid=0x536C8E38 nid=0xb80 waiting for monitor entry [54acf000..54acfd88]
at oracle.jdbc.driver.OracleConnection.rollback(OracleConnection.java:1400)
- waiting to lock <07F3A228> (a oracle.jdbc.driver.OracleConnection)
at weblogic.jdbc.wrapper.JTSConnection.internalRollback(JTSConnection.java:344)
- locked <17587290> (a weblogic.jdbc.wrapper.JTSConnection_oracle_jdbc_driver_OracleConnection)
at weblogic.jdbc.wrapper.JTSXAResourceImpl.rollback(JTSXAResourceImpl.java:75)
at weblogic.transaction.internal.XAServerResourceInfo.rollback(XAServerResourceInfo.java:1283)
at weblogic.transaction.internal.XAServerResourceInfo.rollback(XAServerResourceInfo.java:631)
at weblogic.transaction.internal.ServerSCInfo.startRollback(ServerSCInfo.java:729)
at weblogic.transaction.internal.ServerTransactionImpl.localRollback(ServerTransactionImpl.java:1787)
at weblogic.transaction.internal.ServerTransactionImpl.globalRollback(ServerTransactionImpl.java:2461)
at weblogic.transaction.internal.TransactionImpl$1.execute(TransactionImpl.java:1759)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
"ExecuteThread: '29' for queue: 'weblogic.kernel.Default'" daemon prio=5 tid=0x536C81E0 nid=0x9c0 waiting for monitor entry [54a8f000..54a8fd88]
at oracle.jdbc.driver.OracleConnection.rollback(OracleConnection.java:1400)
- waiting to lock <07F528A8> (a oracle.jdbc.driver.OracleConnection)
at weblogic.jdbc.wrapper.JTSConnection.internalRollback(JTSConnection.java:344)
- locked <17692418> (a weblogic.jdbc.wrapper.JTSConnection_oracle_jdbc_driver_OracleConnection)
at weblogic.jdbc.wrapper.JTSXAResourceImpl.rollback(JTSXAResourceImpl.java:75)
at weblogic.transaction.internal.XAServerResourceInfo.rollback(XAServerResourceInfo.java:1283)
at weblogic.transaction.internal.XAServerResourceInfo.rollback(XAServerResourceInfo.java:631)
at weblogic.transaction.internal.ServerSCInfo.startRollback(ServerSCInfo.java:729)
at weblogic.transaction.internal.ServerTransactionImpl.localRollback(SeI suspect you have a deadlock in the database. There are some WLS threads that seem to be waiting for a response from the DB and there are some others waiting for locks held by those threads. The latter threads are trying to rollback transactions, probably because the transactions have timed out. I'd examine the DB log files to figure out where the deadlock is.
-
Cannot purchase songs on iTunes. After I enter Apple ID and password, Prompt says I need toed to verify my Apple ID. I enter my password again and never get the verification email although my Apple ID and email are correct? Whats up with that?
from this support article:
How do I verify my Apple ID by email?
Simply follow the link in the verification email that says "Verify Now." Sign in with your current Apple ID and password, then click Verify Address. You can also verify by signing in at My Apple ID. -
my ipad 1 isnt being picked up by my computer it also charges very slowly and never gets past the apple logo on startup what should i do
my ipad 1 isnt being picked up by my computer it also charges very slowly and never gets past the apple logo on startup what should i do
-
I print 2 pages to pdf and file size is 600k, I print 1 additonal page and file size goes to 6M, what would cause this (graphics are same on all pages).
I know the colour graphic shading in the document that causes the issue of larger file size, but it doesn't make sense that printing 1 additional page with same information as first 2 pages would cause this.I print 2 pages to pdf and file size is 600k, I print 1 additonal page and file size goes to 6M, what would cause this (graphics are same on all pages).
I know the colour graphic shading in the document that causes the issue of larger file size, but it doesn't make sense that printing 1 additional page with same information as first 2 pages would cause this. -
HDV Print to Video, My Settings
I've seen several posts here about problems getting Print To Video to work with HDV. I just did this and the results were great. So, at the risk of being redundant, I'm going to post what I did.
Camera: Sony FX1, captured using the camera over Firewire.
Captured into FCP using Easy Setup HDV 1080i60
All the footage was nighttime fast action sports.
In the sequence I slowed almost all the footage down to 33.33%, with Frame Blending turned on.
No dissolves, all simple cuts.
No other filters, motion, overlays, graphics, etc.
Sony FX1 Menu Settings:
IN/OUT REC
VCR HDV/DV > AUTO
REC MODE > SP
COMPONENT > 1080i/48Oi
iLINK CONV > OFF
TV TYPE > 16:9
A/V TO D/V OUT > OFF
Final Cut Pro Settings: (as viewed from MENU>FINAL CUT PRO>AUDIO VIDEO SETTINGS...
Summary Tab
Sequence Preset: HDV - 1080i60
Capture Preset: HDV
Device Control: Sony HDV Firewire
Video Playback: None
Audio Playback: None
Sequence Presets Tab
HDV - 1080i60
Capture Presets Tab
HDV
Device Control Tab
Sony HDV Firewire
A/V Devices Tab
Playback Output
Video: None
Audio: Default
"CHECKED" Different Output for Edit to Tape/Print to Video
Video: HDV (1440 x 1080) 30 fps
"CHECKED" Mirror on Desktop
Audio: Default
"NOT CHECKED" Do not show External A/V ...
"NOT CHECKED" Do no show warning ...
Before you Print To Video, make sure you have the Sequence in the Timeline selected. Otherwise you might get an error message. Also, make sure the Camera has a tape and its sitting at the spot you want to print to. (FCP will control the camera)
Then I choose: MENU>FILE>PRINT TO VIDEO ...
Leader: Nothing checked here
Media: Print In to Out (which was set on the Timeline) nothing else checked
Trailer: "CHECKED" Black 5 seconds
"CHECKED" Automatically Start Recording
After you click OK, your sequence will most likely go through a Conforming process, which conforms the sequence as required for HDV. (different from a render) Then the screen will go black, and you can click OK, FCP will cue up the camera, put it in record mode and start the print. (export)
One note: I thought I had also checked MENU>VIEW>EXTERNAL VIDEO>ALL FRAMES. However, when I was done, I checked this menu again and it was set to OFF. So, to be honest I don't know if I did check it and it went back to off, or it was not in fact checked. (lots of messing around prior to getting it to work, sorry)wish I could get it to work consistantly for my GR-HD1 from JVC. terrible that one of the first cameras on the market isn't fully supported by FCP5.
I have to fiddle around endlessly to get the camera recognised. Usually in Camera mode and then quickly switch the Cam back to VCR mode after FCP recognizes it.
The people at the Sony Store here in San Francisco are so rude and ignorant that I will die before buying a camera from them. I went in to buy 3 cameras for my company a month ago and couldn't get any service. The only one paying attention to me was the security guard who kept coming over to tell me that I couldn't touch the camera in the display. I asked the sales staff I finally got to help me a question about the HDV cameras, and he just dissappeared. Never to return. Eff them.
I will stick to JVC even if it means changing my shop over to PCs. Which has been happening a lot around me lately. Video production people fed up with Apple refusing to support equipement. PC software is fully compliant to the entire spectrum of video out there. The blessings of being an open format I guess.
But, I love my G5 and would miss it. -
Have read all threads for the last year on this, and have not been able to Print to Video. It starts fine, transfers via FW to my Sony FX-1. After about 2-4 min. it starts freezing for a split second, then jumps forward, only to freeze again every few seconds. If I have mirror on desktop on, the video on the desktop does NOT freeze, but plays normal. I have no problems capturing hdv video. Here is a list of the things I have tried.
1. Deleted FCP preferences, and rebooted.
2. Shut off energy saver and screen saver.
3. Tried both FW connections and disconnected ALL other FW (400 & 800) devices.
4. Tried different FW cables and 3 different cameras.
5. Exported the project out as a single QT HDV file and imported that to the timeline.
6. Mixdown audio. The timeline and all setting are 1440x1080 hdv & 1080i60.
7. The single QT HDV file is saved on an internal SATA drive with >200 GBs free, not with FCP, OSX
I would be willing to try any suggestions. Thanks for any help.About the only thing left to do is a total rebuild of your startup disk I'd think... HDV isn't my favorite format... but if you HAVE To print back to tape, you've not much of a choice than to edit with it natively. Hey, if you've not done this in a while, it's time to do so in any event. I do it at least every few months with my own systems, and also at the school I teach at part time, there's about 70 FCP stations. We do it every semester and it serves us extremely well. Stable systems each with about 10 or so Users on each... no crashing, and all works as advertised.
FWIW... few need to record back to HDV for any reason... It's not a deliverable format for broadcast in most all instances, and it was intended to be a consumer format... see the original press release from Sony on this years ago... so running it in a Pro NLE like FCP isn't going to be a flawless thing. I'll wager that iMovie does it better! (Though I've never tried it myself) Most pros deliver HDCAM if going to broadcast, and we don't edit HDV natively. Instead, we capture it as ProRes, then use a card like a Kona 3 or an IoHD to turn it into uncompressed HD for delivery.
If after a totally clean installation of the system startup disk still prevents you to print to video with HDV, I'd suggest you fill out a feedback form in the FCP menu. Apple's FCP team reads and logs every single one of these I'm quite sure. They don't read these forums in fact much. They are for user to user discussion.
Hope this helps you.
Jerry -
HDV Print to Video - Video Doesn't Display or Record on Camera
I am editing HDV 1080i60 on FCP 5.1.3 and when I try to Print to Video, the camera screen displays "HDV in" and "i.LINK" but remains blue and does not allow me to press the record button. However, with the same camera (HDR-HC1) and using Final Cut Express I am able to print to video (although this is annoying because it has to convert to Apple Intermediate Codec).
Has anyone else had a similar problem?OK, I have discovered the problem, and it's a doozy.
Her HDV sequence was set for 1280 X 1080, HDV 1080 Compressor, rather than 1440 X 1080. We have no clue how that happened, but it did.
Here's what I had her do last night when she was creating it: She changed the Easy Setup to HDV 1080i60, then created a new sequence. Then she went to the original DVCPRO HD sequence and did a Command-C to copy, then back to the new HDV 1080i60 sequence and Command-V to paste.
This morning, after I discovered the 1280 problem, I did the exact same steps and the new sequence was 1440 X 1080 HDV. I called her and had her do the exact same thing again, and now that new sequence is 1440 X 1080 HDV.
She is now rendering and conforming. I had her make sure ALL of the render bars were checked in Sequence > Render All, and that she chose Both audio and video. This should do it.
Now, the really tough part. I've got to re-read the thread and choose only two Helpful posts. Why can't we have as many as we need?????? -
HDV Print to Video not showing metadata
I'm running Final Cut Studio 2 and a Canon HV20 camcorder. I'm trying to consolidate footage from one tape to a new tape using "Print to Video" but the metadata such as date and time doesn't transfer. It works perfectly when I tested with DV format (consolidating 1 DV to another) but HDV only transfers video and audio with no metadata, and I'm guessing timecode too but I'm not sure. The original tape shows metadata.
I'ved tried with different settings. Captured using HDV Firewire, HDV Firewire Basic, HDV Firewire Basic NDF, AIC and print to video using HDV (1440 x 1080) 60i. They all record to tape fine but no metadata. I've even tried capturing and export to tape using iMovie with the same results (only video and audio with no metadata/timecode). What am I doing wrong?Nope, I'm not talking about photo EXIF metadata, I'm talking about actual video. If I play DV or HDV tapes on my camcorder the date and time of the recording displays in the lower right hand corner of the LCD screen and the time even changes based upon when it was recorded. I've owned 3 DV camcorders and used friend's and they all do this.
When recording DV or HDV the date and time is registered somewhere. Even the new iMovie '08 will name the clips you import by date and time shot for DV or HDV (ex. clip-2003-02-09 13;57;34.dv).
Again, I can import any DV tape (video) now, export it to another tape, play it and the date and time of when it was recorded is retained, even if I rearrange it's order in iMovie or FCP. This is something I've done for years. I just can't accomplish it with HDV. I'm sure it can be done I just need to see what I'm doing wrong in the chain.
Please don't let my use of the word metadata confuse you that I think it's photo EXIF metadata. I used the word metadata because it just means "a set of data that describes and gives information about other data."
Thanks. -
Macbook air July 2012 airplay with video stutters and stalls
I have Mountain Lion installed on my base model 13" Macbook air 2012 and airplay is stuttering and stalling when playing video in VLC and mplayerx. I've got a belkin n600db router and the 3rd gen apple TV (latest software). Is anyone else seeing similar issues?
I've got the same problem. Late 2011 17" MacBook Pro mirroring to 2nd generation AppleTV (720p) over AirPort Extreme supporting 802.11n.
I agree with your Apple "hope" and the sooner the better. AirPlay mirroring was the single largest motivator in getting Mountain Lion. -
When turning on my imac, it loads to a blue screen with a spinning wheel. It never gets passed that screen. I have tried power up to safe mode and it still doesn't work. I have music files saved on the computer and I don't want to lose any of my files. Can someone help me?
Zap the PRAM and Reset the SMC, and see if that fixes it. BTW. detailed computer and OS info goes a long way to solving problems.
Maybe you are looking for
-
All, I have the below IIF statement in SSRS report based on a sharepoint list. However I get #Error only on certain lines For example when Item_Name = P001-P384D630Z01 I am sort of stunned at this point. All the other lines work except the one with a
-
in FCP x backup process is constantly running in background even though its done which results into slow working of FCP x. any idea to resolve the issue? I am using 10.1.3 and facing the problem ever since i have updated my FCP x to 10.1.3
-
I am one of two Apple System Administrators for our company. We recently received a few new Macbook Pros, and upgraded them to Leopard. When setting up the macbooks, we created admin accounts, and then created individual accounts by setting up the Ac
-
Exporting to QT just gives me a green screen
I'm trying to make a clip music video (in WMM since imovie would take 3-4 hours to import everything) and i'm trying to put in a picture that scrolls down, so i tried to put it in Keynote and add a motion path, but when i export it, it gives me a gre
-
MOVE iTiunes from one computer to another computer
when you adapts titles - artists etc ... in iTunes this is written in a database or file somewhere - WHERE ? as consequence if you move your music from one hard drive/computer to another, besides the folders in which your music is stored what other f