HDV "Stream Problem" while digitizing.

I am trying to digitize some HDV footage shot in 720p30. I get deck control I can play the footage in the capture window but when I try to capture now it will capture only a few seconds and then stop and give me this message.
"Stream Problem"
"Capture was stopped due to a problem with the incoming stream. This might be a problem with the tape. All media up to this point has been preserved."
Does anyone know what is going on here or how to fix it?

Greetings everyone,
Just want to add my two cents and testify that this is a real problem regardless of what JVC or Apple want to disavow. My comrade and I shoot with two JVC GY-HD100U's with the HDV 720p30 codec. We purchased the Firestore DR-HD100's (God bless their soul - I don't care what all the reviewers say about this product - they need a visit from the iPod development team) with the cameras and use those for majority of jobs. No problems with TC breaks. However take that backup tape that was simultaneously recording with the Firestore and perform long captures from tape, we encounter stream breaks. Both cameras have had this problem out of the box. We don't have a dedicated deck since we figured most work will come off the Firestores so when we capture from tape its from the camera. However the Firestores are limited by battery life and for long continuous shoots we fall back on tape. Hence the frustration of TC breaks. Could someone from JVC or Apple take some initiative and find the flaw? Thanks.
iMac 20-inch 2 GHz Intel Core Duo Mac OS X (10.4.5) 1GB System RAM/256MB Video RAM

Similar Messages

Flash Player Problems while streaming

Hi there,
i had this problem allready last november with the last flash player version
the problem is:
i can´t stream divx movies anymore!
sounds stupid, and u might tell me, go to the divx support forum BUT as i said i had the same problem allready last year. the update from 28. of november caused a freez every time i wanted to start a stream, only the browser is braking down...the system is still running...there was another update i found from the 1. 2. or 3. of december and after that everything worked out fine.
i don´t have problems with youtube or any other flash animations, it s just the streaming problem.
would be glad if anyone could help

everything is working after deinstalling flash
unbelievable

HDV Luminance Crushed When Digitizing?

I just upgraded to Final Cut 6.
I've shot two interviews with a white background, with the intent to make it very white.
Shot with a Sony Z1U, I specifically lit the background and adjusted the iris so that it read 100% IRE via the zebras. I backed off the aperature by no more than 1/2 stop to just remove zebras from the white background, and then lit my subject based on the background exposure (e.g., I adjusted their lights, not the aperature).
Here's the problem: After digitizing the footage via firewire at both Apple Intermidiate Codec and Native HDV codec, the whites are crushed and the waveform monitor (in FCP) shows the white background as 80%! It should be at least 90%, if not 95%, minimum. 80% just should not be! Both the LCD on the camera and my Sony 8044Q 9" high-end monitor show me WHITE as the background, virtually blown out; yet on the FCP scope it's showing 80%.
My 23" Apple Monitor is calibrated using the Pro version of ColorVision calibration software, and yet, everything looks very warm on my LCD screen as well. Okay, perhaps there's going to be a slight shift in color due to differences in monitors (which is much more than I think it ought to be), BUT, the scope says 80%. So, something somewhere is going on (wrong), and if you have any idea how to help me figure it out, I would be quite thankful.
If it helps, here it is posted on my web site: http://www.thenaturalguide.com/Videos/VegVickiQT.htm
Thank you,
Larry

Greetings everyone,
Just want to add my two cents and testify that this is a real problem regardless of what JVC or Apple want to disavow. My comrade and I shoot with two JVC GY-HD100U's with the HDV 720p30 codec. We purchased the Firestore DR-HD100's (God bless their soul - I don't care what all the reviewers say about this product - they need a visit from the iPod development team) with the cameras and use those for majority of jobs. No problems with TC breaks. However take that backup tape that was simultaneously recording with the Firestore and perform long captures from tape, we encounter stream breaks. Both cameras have had this problem out of the box. We don't have a dedicated deck since we figured most work will come off the Firestores so when we capture from tape its from the camera. However the Firestores are limited by battery life and for long continuous shoots we fall back on tape. Hence the frustration of TC breaks. Could someone from JVC or Apple take some initiative and find the flaw? Thanks.
iMac 20-inch 2 GHz Intel Core Duo Mac OS X (10.4.5) 1GB System RAM/256MB Video RAM

Problem while sending unicode (utf-8) xml to IE.

Hi,
I have encoding problem while sending utf-8 xml from servlet to IE (Client), where i am parsing the xml using Ajax.
In the log I can see proper special characters that are being sent from the servlet. but when same is seen in the client end,, it is showing ? symbols instead of special charcters.
This is the code that sends the xml from servlet.
ByteArrayOutputStream stream = new ByteArrayOutputStream(2000);
transformer.transform(new DOMSource(document), new StreamResult(new OutputStreamWriter(stream, "iso-8859-1")));
_response.setContentType("text/xml; charset=UTF-8");
_response.setHeader("Cache-Control", "no-cache");
_response.getWriter().println(new String(stream.toByteArray(), "UTF-8"));
In the log i can see :
<response status="success" value="1154081722531" hasNextPage="false" hasPreviousPage="false" ><row row_id="PARTY_test_asdasd" column_0="PARTY_test_asdasd" column_1="asdasd �" mode="edit" column_en_US="asdasd �" column_de_DE="? xyz" column_fr_FR="" ></row></response>
But in the Client side I am able to see
<?xml version = '1.0' encoding = 'UTF-8'?>
<response status="success" value="1154082795061" hasNextPage="false" hasPreviousPage="false"><row row_id="PARTY_test_asdasd" column_0="PARTY_test_asdasd" column_1="asdasd ?" mode="edit" column_en_US="asdasd ?" column_de_DE="? xyz" column_fr_FR=""/></response>
I am getting ? instead of �.
It will be greatful if somebody tell how to send utf xml from servlet, for ajax purpose.
Thanks,
Siva1

This is the code that sends the xml from servlet.
ByteArrayOutputStream stream = new
ByteArrayOutputStream(2000);
transformer.transform(new DOMSource(document), new
StreamResult(new OutputStreamWriter(stream,
"iso-8859-1")));Here you produce XML that's encoded in ISO-8859-1. (!!!)
_response.setContentType("text/xml; charset=UTF-8");Here you tell the browser that it's encoded in UTF-8.
_response.getWriter().println(new String(stream.toByteArray(), "UTF-8"));Here you convert the XML to a String, assuming that it was encoded in UTF-8, which it wasn't.
Besides shooting yourself in the foot by choosing ISO-8859-1 for no good reason, you're also doing a lot of translating from bytes to chars and back again. Not only is that a waste of time, it introduces errors if you don't do it right. Try this instead:_response.setContentType("text/xml; charset=UTF-8");
_response.setHeader("Cache-Control", "no-cache");
_transformer.transform(new DOMSource(document_),
new StreamResult(_response.getOutputStream()));

How do I put digitizing window behind other windows while digitizing?

I just upgraded to FCP 5.0.1 and ever since (while digitizing), the digitizing window stays in the forefront and I can not go on the web or work in other applications during the process. I never had this problem in the past. I'm thinking it's a preferences thing but I'm not sure.
Applications do launch..it's just that the windows (i.e. the safari browser window) comes up behind the digitizing window. And it won't come to forefront.

I think you're asking for trouble and dropped frames trying to do much while capturing...
AFAIK, there is no preference to allow the window to be pushed down...
Patrick

Problem while using camera connetor and Sony DSC-M1

Dear all
My digital Camera Sony DSC-M1 is able to take pictures and take video into mpeg4 format .
this is the revirew of this camera
http://www.steves-digicams.com/2004_reviews/m1.html
However, I got a problem while using this camera with iPod +Camera connector.
When I plug this camera into camera connector , ipod will transfer all photo from the camera , but do nothing with the video.
I guess that problem is the video file is not inside the "/DCIM" folder
All video file ( *.mp4 ) are all in the folder named " /MP_ROOT/101MNV01/ "
Can anyone help me how to make this sync from camera to ipod automatically both photo and video ?
This problem also bother me while I am using iPhoto to transfer the file when I was home .
pls , help me , thanks a lot

Hi there, I'm having exactly the same problem. Have you found out how to do it?

MW1 streaming problem - stutter

I bought my MW1 just the other day and been trying different ways to come up with a solution...
Problem; while streaming music from the phone (normal player or Spotify) the music gets chopped up in tiny tiny pieces (stutter) - last for a few seconds up till 20sek(?)... from time to time this repeats it self every 30 sek to 1 minute ((in which cases I freak out and turn it off or start listening to music I put on the memorycard)), but in periods it works ok for a longer time.
Other times the music just stop! ....and then continue again after a short period, and it has also disconnected with no reason.
I tried turn off/on + rebooting my phone, factory reset and so on....
It's reeeealy frustrating... been using MW600 before without issues.
Model: Smart Bluetooth Haedset MW1
Firmware: 0.1.E.1.4
Paired with: Samsung Galaxy Note II

It was possible to do a "downgrade" by performing following steps.
do a Factory reset on your MW1
download "Update services" to your computer link here
follow the instructions from "Update services"
it will tell you it has a new update - fw ver. 0.1.D.0.6
(it will later ask you to update to 0.1.E.1.4 - DON'T!!)
After this the music streaming seams to work OK, although... I can't access the "notification" except from when a new notification pops in through the "round" button (not in the menu), and it looks like the 25% of the battery disappears in a heartbeat after taken off the charger.
PLEASE Sony - review your update and fix the bugs.

Cant stream movies while using airplay

CAnt stream movies while using airplay. says error occured

Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device.
If you are still having problems, the following article(s) may help you.
Troubleshooting AirPlay
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
When making adjustments to your network for better optimisation, you may find some of the points mentioned on this page helpful.

Problem while entering IBAN...

Dear experts...
Im facing the problem while entering the IBAN detils in 0009 Infotype.
It is showing the message that IBAN is wrong.
According to the client it is correct IBAN number.
After giving the Bankkey and Account number it is creating the IBAN,which is differing in CHECKDIGITS FOR VALIDATION.It is the digits after Countrykey.
System is showing IT98,but client is mentioning it as 56.
What could be the reason of difference.
Please advice me to resolve the problem.
Regards,
Vikram.

We have asked the users to check the IBAN once again with particular banks.
They have come with correct IBAN now.
Thanks,
Vishnu.

Problem while dropping a table

Dear All,
I am facing a problem while dropping a table in Oracle 10g.
I am able to find the number of records in the table but unble to delete it.
SQL> select count(*) from merchant_audit;
COUNT(*)
30028278
SQL> drop table merchant_audit;
drop table merchant_audit
ERROR at line 1:
ORA-00942: table or view does not exist
I have to drop this table from the database. Please help.
regards,
Santhosh

Hi,
IS it a table ? Is it your table ?
Read this example :
sqlplus scott/*****
SQL> create table merchant_audit(col1 number);
Table created.
SQL> create public synonym merchant_audit for merchant_audit;
Synonym created.
SQL> grant select on merchant_audit to merchant;
Grant succeeded.
SQL> conn merchant/merchant
Connected.
SQL> select count(*) from merchant_audit;
COUNT(*)
0
SQL> drop table merchant_audit;
drop table merchant_audit
ERROR at line 1:
ORA-00942: table or view does not exist
SQL>
See owner into the dba_tables, and if synonym into dba_synonyms.
Nicolas.
Message was edited by:
Nicolas Gasparotto

Unable to initialize hdv deck problem

Hi all,
I'm having the 'unable to initialize hdv deck' problem. I am trying to capture HD footage from a Sony HVR-A1E camera. iLink and down conversion are off (like they should be) and I have just captured a HD tape before the problem started.
I don't understand how I could capture HD footage just fine and then without touching any settings (just trying to start capture again) I suddenly get the error message, "Unable to initialize HDV deck. Please make sure a deck is connected and try again."
Any ideas?

Definitely. Shot on HDV, definite difference between the clips I've captured so far (HD capture that worked fine before this is high quality sharp image, where as when capturing in SD, image quality is poor and smaller).
Everything has been filmed on the same camera with no setting changes between shots. Like I said before, I have already been able to capture today in HD just fine, but for some unknown reason (which I don't think is the prefs.) capture will not work. I can 'trick' FCE into HD capture but it gets stuck on cueing tape (even though video is playing fine on camera).

Facing problem while going to catch return result from web-services.

Hi everybody,
I am new to BPEL. I am facing problem while going to catch the attributes of resultsets returning from web-services(QAS). As far as my knowledge, two types of results it should return - XML entities and another is attributes which is coming as the part of XML entitites. I am able to catch the XML entities, but can't catch the attributes under it. Even, I am not able to see whether web-services returning something within that field.
When, I tried to catch the attribute and store to a temporary varilable using the following code:
*<assign name="AssignQASDoGetAddress1">*
*<copy>*
*<from variable="InvokeQAS_DoSearch_OutputVariable"*
part="body"
query="/ns6:QASearchResult/ns6:QAPicklist/ns6:PicklistEntry/@PostcodeRecoded"/>
*<to variable="temp"/>*
*</copy>*
*</assign>*
but, I am facing the following selectionFailure errors after running it:
*"{http://schemasxmlsoap.org/ws/2003/03/business-process/}selectionFailure" has been thrown.*
-<selectionFailure xmlns="http://schemasxmlsoap.org/ws/2003/03/business-process/">
-<part name="summary">
*<summary>*
empty variable/expression result.
xpath variable/expression expression "bpws:getVariableData('InvokeQAS_DoSearch_OutputVariable', 'body', '/ns6:QASearchResult/ns6:QAPicklist/ns6:PicklistEntry/@PostcodeRecoded')" is empty at line 269, when attempting reading/copying it.
Please make sure the variable/expression result "bpws:getVariableData('InvokeQAS_DoSearch_OutputVariable', 'body', '/ns6:QASearchResult/ns6:QAPicklist/ns6:PicklistEntry/@PostcodeRecoded')"is not empty.
*</summary>*
*</part>*
*</selectionFailure>*
Getting this error it seems to me that web-service is returning nothing, but, it returns something as it has been catched using a method called isPostcodeRecoded() Java Code in Oracle ADF. This method has been used as it should return boolean whereas for catching the xml entities using java code we used the method like getPostcode(), getMoniker().
For your information, we are using Jdeveloper as the development tool for building the BPEL process.
Am I doing any syntax error. Please consider it as urgent and provide me asolution.
Thanks in advance.
Chandrachur.

Thanks Dave and Marc, for your suggestions. Actually what I found is QAS web-service is returning nothing as attributes when the attributes are set to the default value. For example, following is the part of the wsdl of the result which QAS webservice returns.
<xs:element name="QASearchResult">
- <xs:complexType>
- <xs:sequence>
<xs:element name="QAPicklist" type="qas:QAPicklistType" minOccurs="0" />
<xs:element name="QAAddress" type="qas:QAAddressType" minOccurs="0" />
</xs:sequence>
<xs:attribute name="VerifyLevel" type="qas:VerifyLevelType" default="None" />
</xs:complexType>
</xs:element>
<xs:complexType name="QAPicklistType">
- <xs:sequence>
<xs:element name="FullPicklistMoniker" type="xs:string" />
<xs:element name="PicklistEntry" type="qas:PicklistEntryType" minOccurs="0" maxOccurs="unbounded" />
<xs:element name="Prompt" type="xs:string" />
<xs:element name="Total" type="xs:nonNegativeInteger" />
</xs:sequence>
<xs:attribute name="AutoFormatSafe" type="xs:boolean" default="false" />
<xs:attribute name="AutoFormatPastClose" type="xs:boolean" default="false" />
<xs:attribute name="AutoStepinSafe" type="xs:boolean" default="false" />
<xs:attribute name="AutoStepinPastClose" type="xs:boolean" default="false" />
<xs:attribute name="LargePotential" type="xs:boolean" default="false" />
<xs:attribute name="MaxMatches" type="xs:boolean" default="false" />
<xs:attribute name="MoreOtherMatches" type="xs:boolean" default="false" />
<xs:attribute name="OverThreshold" type="xs:boolean" default="false" />
<xs:attribute name="Timeout" type="xs:boolean" default="false" />
</xs:complexType>
<xs:complexType name="PicklistEntryType">
- <xs:sequence>
<xs:element name="Moniker" type="xs:string" />
<xs:element name="PartialAddress" type="xs:string" />
<xs:element name="Picklist" type="xs:string" />
<xs:element name="Postcode" type="xs:string" />
<xs:element name="Score" type="xs:nonNegativeInteger" />
</xs:sequence>
<xs:attribute name="FullAddress" type="xs:boolean" default="false" />
<xs:attribute name="Multiples" type="xs:boolean" default="false" />
<xs:attribute name="CanStep" type="xs:boolean" default="false" />
<xs:attribute name="AliasMatch" type="xs:boolean" default="false" />
<xs:attribute name="PostcodeRecoded" type="xs:boolean" default="false" />
<xs:attribute name="CrossBorderMatch" type="xs:boolean" default="false" />
<xs:attribute name="DummyPOBox" type="xs:boolean" default="false" />
<xs:attribute name="Name" type="xs:boolean" default="false" />
<xs:attribute name="Information" type="xs:boolean" default="false" />
<xs:attribute name="WarnInformation" type="xs:boolean" default="false" />
<xs:attribute name="IncompleteAddr" type="xs:boolean" default="false" />
<xs:attribute name="UnresolvableRange" type="xs:boolean" default="false" />
<xs:attribute name="PhantomPrimaryPoint" type="xs:boolean" default="false" />
</xs:complexType>
here the attributes like FullAddress, PostcodeRecodedare , etc. are not being return by the web-service when it is getting the default value false. But, if it gets true then , it is being displayed at the BPEL console.
Do you have any idea how can I catch the attributes and its value even when it gets the default value which is already set. Previously, it was returning(it was not being displayed at the console).
Thanks once again for your valuable suggestions...!!!
Chandrachur.

Problem while inserting into a table which has ManyToOne relation

Problem while inserting into a table *(Files)* which has ManyToOne relation with another table *(Folder)* involving a attribute both in primary key as well as in foreign key in JPA 1.0.
Relevent Code
Entities:
public class Files implements Serializable {
@EmbeddedId
protected FilesPK filesPK;
private String filename;
@JoinColumns({
@JoinColumn(name = "folder_id", referencedColumnName = "folder_id"),
@JoinColumn(name = "uid", referencedColumnName = "uid", insertable = false, updatable = false)})
@ManyToOne(optional = false)
private Folders folders;
public class FilesPK implements Serializable {
private int fileId;
private int uid;
public class Folders implements Serializable {
@EmbeddedId
protected FoldersPK foldersPK;
private String folderName;
@OneToMany(cascade = CascadeType.ALL, mappedBy = "folders")
private Collection<Files> filesCollection;
@JoinColumn(name = "uid", referencedColumnName = "uid", insertable = false, updatable = false)
@ManyToOne(optional = false)
private Users users;
public class FoldersPK implements Serializable {
private int folderId;
private int uid;
public class Users implements Serializable {
@Id
@GeneratedValue(strategy = GenerationType.IDENTITY)
private Integer uid;
private String username;
@OneToMany(cascade = CascadeType.ALL, mappedBy = "users")
private Collection<Folders> foldersCollection;
I left out @Basic & @Column annotations for sake of less code.
EJB method
public void insertFile(String fileName, int folderID, int uid){
FilesPK pk = new FilesPK();
pk.setUid(uid);
Files file = new Files();
file.setFilename(fileName);
file.setFilesPK(pk);
FoldersPK folderPk = new FoldersPK(folderID, uid);
// My understanding that it should automatically handle folderId in files table,
// but it is not…
file.setFolders(em.find(Folders.class, folderPk));
em.persist(file);
It is giving error:
Internal Exception: java.sql.SQLException: Field 'folderid' doesn't have a default value_
Error Code: 1364
Call: INSERT INTO files (filename, uid, fileid) VALUES (?, ?, ?)_
_ bind => [hello.txt, 1, 0]_
It is not even considering folderId while inserting into db.
However it works fine when I add folderId variable in Files entity and changed insertFile like this:
public void insertFile(String fileName, int folderID, int uid){
FilesPK pk = new FilesPK();
pk.setUid(uid);
Files file = new Files();
file.setFilename(fileName);
file.setFilesPK(pk);
file.setFolderId(folderId) // added line
FoldersPK folderPk = new FoldersPK(folderID, uid);
file.setFolders(em.find(Folders.class, folderPk));
em.persist(file);
My question is that is this behavior expected or it is a bug.
Is it required to add "column_name" variable separately even when an entity has reference to ManyToOne mapping foreign Entity ?
I used Mysql 5.1 for database, then generate entities using toplink, JPA 1.0, glassfish v2.1.
I've also tested this using eclipselink and got same error.
Please provide some pointers.
Thanks

Hello,
What version of EclipseLink did you try? This looks like bug https://bugs.eclipse.org/bugs/show_bug.cgi?id=280436 that was fixed in EclipseLink 2.0, so please try a later version.
You can also try working around the problem by making both fields writable through the reference mapping.
Best Regards,
Chris

A web developer problem while running a web application

Hi all,
I'm novice to J2EE.
I've encountered a problem while accessing the deployed module in weblogic 8.1 server.
I'm sure that the webapplication module is deployed as i saw my module in administration console & also the status said that it is deployed.
when i access my web application by specifying the proper server and port no and context root it is showing
either 505 - resource not found error(http://localhost:7001/Suresh-2/Suresh) or 404 - not found error.( http://localhost:7001/Suresh-2/Suresh)
Now let me elaborate what i've done till now.
My webapplication folder structure is : C:\bea\user_projects\domains\mydomain\applications\Suresh\WEB-INF\classes\Sai\ServExamp.class
My servlet is ServExamp.java
I created a folder called "Suresh". In that folder created another folder called "WEB-INF". In WEB-INF created a folder called "Classes".
Since my servlet is in package "Sai", the .class file reside in \Suresh\WEB-INF\Classes\Sai\ServExamp.class
The source code is :
package Sai;
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
public class ServExamp extends HttpServlet
public void doPost(HttpServletRequest req,HttpServletResponse res)throws IOException
PrintWriter out=res.getWriter();
java.util.Date today=new java.util.Date();
out.println("<html>"+"<body>"+
"<h1 align=center>HF\'s Chapter1 Servlet </h1>"
+"<br>"+today+"</body>"+"</html>");
Now i'm almost done creating a web application. Next, I constructed a simple web.xml descriptor that gives a web friendly name for my servlet, and points to the servlet. I constructed web.xml descriptor file in the WEB-INF folder (C:\bea\user_projects\domains\mydomain\applications\Suresh\WEB-INF\).
The web.xml file source is :
<!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<display-name>Hello World Web Application</display-name>
<description>Test Servlet</description>
<servlet>
<servlet-name>ServExamp</servlet-name>
<servlet-class>Sai.ServExamp</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>ServExamp</servlet-name>
<url-pattern>/Suresh</url-pattern>
</servlet-mapping>
</web-app>
Now I have told Weblogic that the URI /Suresh corresponds to my servlet "Sai.ServExamp".
My Web Application is ready to be deployed at this point. I logged onto Weblogic's admin console,
1) clicked on deployments, then navigated to "Web Application Modules" .
2) Clicked "Deploy new Web Application Module"
3) Navigated to the location of your web application folder (Suresh). There was a radio button next to it indicating that I can select that folder as a valid web application.
4) I Clicked that radio button and clicked "Target Module".
5) It informed that my web application "Suresh" will be deployed to myServer.It asked a name for my web application deployment. By default it was "Suresh"
I clicked Deploy.
6) After deployment, my web application "Suresh" appeared in the "Web Application Modules" tree on the left.
I Clicked on "Suresh"( my web application) then clicked the testing tab, then clicked the link shown there(http://localhost:7001/Suresh-2).
It was not showing my servlet (showed a 403 error)
Error - 403
This status code is commonly used when the server does not wish to reveal exactly why the request has been refused, or when no other response is applicable.
I think so it came b'coz I don't have an index.html or index.jsp page.
7)Instead,I added my servlet on to the URL it provided.
http://localhost:7001/Suresh-2/Suresh
It is showing these error code: Http: 505 resource not allowed
The page cannot be displayed
The page you are looking for cannot be displayed because the address is incorrect.
Please try the following:
If you typed the page address in the Address bar, check that it is entered correctly.
Open the localhost:7001 home page and then look for links to the information you want.
Click Search to look for information on the Internet.
when i just type : http://localhost:7001/ -> Error 404 not found error
it's showing
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
I want to run my web application & any help would be appreciated.
Thanks in advance.
with regards,
S.SayeeNarayanan.
Note: I even deployed my war file, which i got by execution of (jar cv0f webapp.war . ) command from the root directory of my web application i.e. Suresh
Then executed my webapplication it is showing
error-505 resource not allowed.
--------------------------------------------------------------------------------------------

try a fully qualified path to the pem file

Problem while Fetching BSAD

Hi to all ,
I' ve problem while fetching bsad for a report , in t-code se30 i've seen that it takes %89,1 performance of overall.
SELECT belnr buzei dmbtr blart budat augdt augbl sgtxt
   into table odemelerg
          FROM bsad
          WHERE bukrs EQ bukrs
            AND kunnr EQ kunnr
            AND ( umsks EQ space OR umsks IS NULL )
            AND ( umskz EQ space OR umskz IS NULL )
            AND augbl EQ i_augbl
            AND augdt GE i_budat
            AND gjahr EQ gjahr
            AND belnr NE i_belnr
            AND bsadbelnr NE bsadaugbl
            AND ( blart EQ blart_bt OR blart EQ blart_hf
                  OR blart EQ blart_mi ).
here : blart_bt is declared as a constant type and its value is 'BT'. such as blart_hf, blart_mi
How can I make this Select query working in a better performance
Kind regards,
Caglar

Hi
If you know the bill number:
-1) Search FI document:
Get header data
select * from bkpf where AWTYP = 'VBRK'
                     and AWKEY = BILL NUMBER.
EXIT.
ENDSELECT.
Get items data
SELECT * FROM BSEG INTO TABLE T_BSEG
                       WHERE BUKRS = BKPF-BUKRS
                         AND BELNR = BKPF-BELNR
                         AND GJAHR = BKPF-GJAHR
                         AND KOART = 'D'.
Payment:
LOOP AT T_BSEG WHERE AUGDT <> '00000000'.
IF T_BSEG-AUGBL <> _BKPF-BELNR
    T_BSEG-AUGDT <> _BKPF-BUDAT.
SELECT * FROM BKPF INTO _BKPF
                    WHERE BUKRS = T_BSEG-BUKRS
                      AND BELNR = T_BSEG-AUGBL
                      AND BUDAT = T_BSEG-AUGDT.
   EXIT.
ENDSELECT.
SELECT * FROM BSEG APPENDING TABLE T_PAYMENT
                       WHERE BUKRS = _BKPF-BUKRS
                         AND BELNR = _BKPF-BELNR
                         AND GJAHR = _BKPF-GJAHR
                         AND KOART = 'D'.
ENDIF.
ENDLOOP.
Partial payment
SELECT * FROM BSAD INTO TABLE WHERE BUKRS = BKPF-BUKRS
                                AND KUNNR = T_BSEG-KUNNR
                                AND REBZG = BKPF-BELNR
                                AND REBZJ = BKPF-GJAHR.
Max

HDV "Stream Problem" while digitizing.

Similar Messages

Maybe you are looking for