HDV via FireWire output not available

After editing an HDV50i project in a HDV50i timeline I would like to print it to video. Under "View -> Video Playback" all the HDV options are gray! I cannot select them. Consequently I cannot play the video through the FireWire output. In "Easy Setup" all possible codecs are there and I can choose them (DV, HDV, ProRes, DVCPro etc.etc.). When I startup FCP my Sony Z7 is already attached via FireWire. What's going wrong?

You can't play back HDV through FireWire. The video stream has to be conformed because of the MPEG-2 format. You can print to video. To see your output on a monitor you'd need to get a Matrox MXO2 box.

Similar Messages

Audio from firewire interface not available to QT Broadcaster for streaming

We have two Mirror Door Power Mac G4's (Model PowerMac3,6) set up for originating streams.
One has a Lynx Studio L22 sound card in a PCI slot. QuickTime Broadcaster sees the audio from this card and we can originate streams fine.
The other computer has an M-Audio Firewire 410 Audio Interface connected by firewire. This interface is selected as the audio source in QuickTime Broadcaster. When we start broadcasting clients can see the stream, but there is no audio signal present in the stream.
Why is it different when using the external firewire audio interface? All else is the same between the computers. Both send streams to the same QTSS; both have identical RAM; both have the same CPU; both have no issue connecting to the QTSS.
Thanks.

There is a description of a possible workaround at <http://homepage.mac.com/beryrinaldo/gbsf/>. It worked for me in principle, however, it has a significant delay. This does not allow you to monitor your track, e.g., using headphone. You also have to adjust the track after recording manually.
Another workaround would be to record a track using QuickTime Pro 7. QT lets you record directly from a DV camera via firewire. However, you still need to export as AIFF, import in GB, and adjust the track manually for every single recording.
It would be best to have a audio device (something like Soundflower) that can capture incomming signals from a DV camera directly and that is mentioned in the list of possible choices in GB's preferences.
Anyone out there who has seen something like that?
Greetings,
Claus

Can't connect via sqlnet - oracle not available

Having trouble connecting to the database via sql*net. I'm executing sqlplus from the database machine. Connection works if I don't specify a SID in the sqlplus arguments (ie. sqlplus tbils/xxx), so the instance is up and available; but does not work if I give a SID:
$sqlplus tbils/xxx@bils
SQL*Plus: Release 10.1.0.3.0 - Production on Wed Jun 8 13:10:54 2005
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
tnsping works:
$tnsping bils
TNS Ping Utility for Linux: Version 10.1.0.3.0 - Production on 08-JUN-2005 13:14:50
Used parameter files:
/work/software/oracle/app/oracle/product/10.1.0/Db_2/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.107)(PORT = 1521)) (CONNECT_DATA = (SID = BILS)))
OK (0 msec)
Here are the contents of tnsnames.ora:
BILS =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.107)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = BILS)
listener.ora:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(ORACLE_HOME = /work/software/oracle/app/oracle/product/10.1.0/Db_2)
(SERVICE_NAME = BILS)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.107)(PORT = 1521))
sqlnet.ora:
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
and relevant environment:
ORACLE_SID=BILS
ORACLE_BASE=/work/software/oracle/app/oracle
ORACLE_HOME=/work/software/oracle/app/oracle/product/10.1.0/Db_2
TNS_ADMIN=/work/software/oracle/app/oracle/product/10.1.0/Db_2/network/admin
Anyone have an idea as to what's wrong or what file it's looking for?
Thanks!

Do you have a NAMES.DEFAULT_DOMAIN in your SQLNET.ora file?

IPod mounts via Firewire, but not via USB

My wife's iPod used to mount just fine via the USB connector on her PC.
Now it doesn't mount at all via USB. I have tried two different cables.
It DOES mount via my own Firewire cable.
I have updated the iPod mini software to the latest, and the iTunes to the latest.
Any ideas why USB no longer works?
Thanks

I wanted to get rid of this one since nobody answered. I think the 3G is simply broken. It works fine via firewire, and now I use it as a stationary music server -- the battery was too old for regular use. I bought a 5G.

Output not available on HDMI port

The above notebook is with AMD Phenom P960 process & with AMD M880G ATI Mobility Radeon HD 4250 display adaptor.
The display driver is ver 8.900.7.1000 dated 28/09/2011.
Before I was able to plug in the HDMI cable to my TV & extend my display.
Currently, I am unable to extend my display. My TV detects the source, but when I try to output the display, it is not able to output it to the TV. It outputs it only to the VGA port.
I have tried changing the HDMI cAbles as well as different monitors. The story is still the same.
I have disabled the drivers & inmstalled them again still no solution. I deleted the drivers & visited teh AMD site to auto detect & recommend the driver. This too gave no results.
Please advise?

Good Morning @Solutiongetter ,
Welcome to the HP Forums!
It is a wonderful place to find answers and suggestions!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that you are unable to get your TV recognized when connected by HDMI but it was working previously. You have updated the graphic drivers from the AMD site but no change.
Here is a link to the recommended software and drivers HP Pavilion g6-1a44ca Notebook PC Drivers. Please note that the recommended drivers are not the same versions as the one you have currently installed.
I suggest you delete( not uninstall) the current driver and install the recommended driver. If you were to just uninstall the driver, when you restarted it would automatically apply the latest driver.
When you download drivers from the manuafacturer's site as they have been untested the results are unknown and may or may not function correctly. OEM's can and do alter drivers to perform with their system.
Downloading or Updating Software and Drivers for HP Computers
Please note there is also a bios update. If you have not done that yet, I suggest trying that first as in can make a difference.
Updating the BIOS
As updating the bios does carry a potential to cause damage I suggest contacting HP support.
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
If you connect the TV to a different computer, I am assuming it works.
Best of Luck !
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

MacBook Pro 1,1. OS X 10.6.8 Trying to connect an Edirol FA-101 via FireWire, Macbook not recognizing device.

Hello,
I'm trying to connect an Edirol FA-101 to my MacBook Pro. I'm running Snow Leopard 10.6.8. Other fireWire devices and drives work on the port, but the Edirol is not showing up in Audio MIDI setup or anywhere. I've tried both DC power and Bus power on the Edirol. Did the SMC reset, flashed the PRAM. Reset Permissions in safe mode. Still nothing. The lights on the device show that it is on and connected, but in system profiler I get "Warning: Unable to list firewire devices."
Any ideas?
Josh

Hate to say it, but it sounds like the device has gone kaputt.

Capturing video via Firewire does not work on CS6

I recently installed 64 bits Windows 7.
The capture function in Premiere CS6 does not work with my panasonic camcorder NV-GS500
Windows recognizes the camcorder, but I cannot do anything with it in the Capture window.
This not an Premiere-specific problem , because also wit Nero I have the same problem.
I expect that the Windows7 driver for my camera needs to be upodated, but Panasonic cannot help me.
Is there anybody out in the Premiere community who knows a solution?

Windows 7 Changed the standard 1394 driver from XP which allows Win 7 to Throttle bandwidth on Firewire devices. This is why Ann mentioned the legacy driver which is basically the old XP driver. The bandwidth throttling causes allot of issues with certain cameras during the Handshake process which is why you often have deck control but no preview or primary video stream. If you follow the instructions in the link above or the paste below to set the Legacy driver for the 1394 controller , that will often resolve these issues. However some firmware on different manufacturers Firewire controllers include these C-State Bandwidth throttling sets so it still may not work. In that case you want to get a Firewire card with a TI chipset. The firmware on TI chips are clean and dont include the C-State changes.
Solution 6: Use the Legacy FireWire driver (Windows 7 x64)
Click the Windows Start button; type "device manager" into the Search box and select Device Manager
Swivel open the "IEEE 1394 Bus host controllers" item
Right-click on your listed 1394 controller; select "Update Driver Software"
Click the "Browse my computer for driver software" button, followed by the "Let me pick from a list" button
Select the option that has "(Legacy)" at the end of the name; click Next and let Windows install the driver
Make sure you restart the system after you make the change to legacy. Also do not have the Firewire device plugged in when changing the driver to Legacy.
Close out of dialogs and retry capture'
Eric
ADK

External Hard Drive via firewire - files not showing up

I have a new external harddrive formatted for mac and keep having the following issue:
when clicking into the harddrive I see folder but when I go to a folder to see the files they are all gone. If I use spotlight to search then I can open the file. I can re-boot and the the files appear.
Anyone have a clue on what this might be. I hate to keep rebooting it is making think I went back to windows
the external harddrive is a seagate

Hi Will
Never seen the problem myself with either of my FireWire Drives, but open Disk Utility in your Utilities Folder select First Aid, then the External HD's icon and run Repair Disk.
Dennis

Solutions for previewing HDV via video monitors ?

I have recently been given the task of setting up a video editing suite combining:
FCP6
HVR-1500 decks
Panasonic BT-LH1700WE LCD video monitors
FX7E HDV cameras
I've read that it is not possible to preview HDV via firewire and this seems to be the case thus rendering the Video preview monitors useless via the decks at least.
My question is what would we need to get in order to get a live broadcast preview to the monitors ?
Many thanks in advance.
-matt

Ok so i've done a little research and it seems like The Matrox MXO would be the best solution for our needs.
Does anybody have any experiance with this or a similar output device ?

I have a MacBook Pro (Retina) and a Sony HandyCam DCR-HC48 video Camera. The Sony only exports video via Firewire, which is not available on the Mac. Is there a firewire to USB or to HDMI adapter?

I have a MacBook Pro (Retina) and a Sony HandyCam DCR-HC48 video Camera. The Sony only exports video via Firewire, which is not available on the Mac. Is there a firewire to USB or to HDMI adapter?

tyler57,
it would be better to direct that question to Gary Loftis, since my MacBook Pro doesn’t have a Thunderbolt port.

Capturing HDV Into ProRes 422 (LT) Via FireWire

I read this fine tutorial on Moviola on the technique of Capturing HDV Into ProRes Via FireWire.
http://moviola.com/hdv_prores
Since you can choose ProRes 422 (LT) as an option in the Log and Transfer window, I was wondering if there is a way to capture HDV to ProRes 422 (LT) via firewire like in the above mentioned article.
I tried creating a custom capture setting in the AV Settings, but ProRes 422 (LT) was not available as an option, only ProRes 422 and ProRes 422 (HQ). And those settings cannot be edited or duplicated (grayed out).
I don’t know why ProRes 422 (LT) is available in the Log and Transfer window but not in the AV Settings window. Maybe it will become available in an update.
In the meantime, does anyone know a way to get around this? Maybe modifying an FCP file somewhere?
Thanks,
======
Richard

HDV is recorded to tape inside of the camera as digital information. Component coming out of the camera is analog. The camera is performing the first conversion D/A, from HDV (digital) to component out (analog).
Component going into the ioHD is analog. The ioHD then converts via its hardware to Prores (any flavor), which is digital. The ioHD has to convert the analog from the component outs of my camera to digital for use in FCP. FCP only uses digital video.
You said "The IOHD internally converts to ProRes.." converts to ProRes is the second A/D conversion.
So the path is D/A/D. I count that as two conversions, camera D/A as one the ioHD A/D as two.
I don't want to unnecessarily convert from digital to analog to digital which is why I don't use the ioHD to convert from HDV to Prores (any flavor).
Unfortunately I don't have any digital outs for this camera, neither HDMI or HD SDI.
I believe capturing and converting HDV to ProRes via firewire in FCP doesn't have this D/A/D conversion which is why I'd like to be able to capture HDV to ProRes LT via firewire in FCP and stay digital all the way, with no analog conversions.
I use the ioHD for all of my analog to digital conversions. It's a great box from a great company.
Thanks,
=====
Richard

Final Cut Not Recognizing Camera/Devices Connected Via FireWire

I have a Macbook and a Macbook Pro and I'm having the exact same issue with both of them. I'm trying to capture DV footage into Final Cut Pro 5 via a Sony Digital Video Cassette Recorder GV-D1000 NTSC, I've also tried capturing into iMovie with the firewire device not being recognized there either.
Device control is "FireWire NTSC Basic" and Capture/Input is "DV NTSC 48 khz" I've captured footage plenty of times and never had a problem until now. I've tried just about every audio/video setting there is including anamorphic as I saw suggested in a similar thread and nothing has changed. I've also tried different firewire cables, different devices including canon/sony and a panasonic cameras. When I connect a new device it shows "vtr ok" for a few seconds and then switches to "no communication". I've tried trashing my preferences and repairing permissions. I've updated quicktime/restarted the macs/unplugged the devices etc. I've also tried playing the tape on the sony box first and then opening FCP and attempting to capture, the footage stops playing and I get an error message that "video is not available". I'm capturing to a 500gb external harddrive that I've used before with no problems and is connected via usb. At one point it did allow me to start the capture now process, but it kept dropping a million frames and aborting, now it won't even let me get that far. I'm literally pulling my hair out, can some one PLEASE, PLEASE HELP ME??!!?

Exactly what version of QT are you running now?...and FCP5.?
Have you tried the Guiness solution yet?..shut everything down and unplug, wait 15 minutes, plug all back in, then turn on camera/deck first.
Confirm that System Profiler recognizes the camera/deck and the deck is set in VTR mode (not camera mode), then open FCP.
Could be a bad FW port (have you tried other ports on the mac?)
Or, could be QT incompatibility...
http://www.digitalrebellion.com/blog/cats/28/index2.html
http://www.digitalrebellion.com/blog/posts/listof_quicktimedownloads.html
K

Output via Firewire

I am trying to export my finished video to my camera via firewire so that I can then send it to a VCR via the camera's analog outputs. I used to do this often on my old computer, but can't do it on my new one. I connect a firewire cable from the computer to the camera, but do not then see the video in the camera's LCD screen. This leads me to believe that the signal is not being sent from the computer.
Is there a setting, either within Premiere CS4 or in the computer's Control Panel, which I need to change?
Thank you.

Settings : Playback>External Device xxxx may help
or Check out the Export setting in that screen also

J2EE Database is not available via test

Hello my friends,
I've got a problem with my SAP NW/DB2 installation. When i want to start sap, i get the following output:
si4host:si4adm 13> startsap si4host
Checking DB6 db Database
ABAP Database is not available via R3trans
Checking DB6 db Database
Error: java.io.FileNotFoundException: JdbcCon.log (Permission denied)
J2EE Database is not available via test
See logfile JdbcCon.log
Starting SAP-Collector Daemon
This is Saposcol Version COLL 20.86 640 - V1.12 for Linux
Usage: saposcol -l: Start OS Collector
        saposcol -k: Stop OS Collector
        saposcol -d: OS Collector Dialog Mode
        saposcol -s: OS Collector Status
The OS Collector (PID 14643) is already running .....
saposcol already running
Running /usr/sap/SI4/SYS/exe/run/startdb
/usr/sap/SI4/SYS/exe/run/startdb completed successfully
Checking DB6 db Database
ABAP Database is running
Starting SAP Instance SCS01
Startup-Log is written to /home/si4adm/startsap_SCS01.log
Instance on host itpc1f41009 started
Starting SAP Instance DVEBMGS00
Startup-Log is written to /home/si4adm/startsap_DVEBMGS00.log
Instance on host itpc1f41009 started
IGS on host itpc1f41009 started
The server runs on suse 9.3.
Anybody know how to solve this?
Greetings
Chantal

Hi
This is a common problem .Actually ur database pwd is not same mentioned in the configtool----
secure store.
Change the database password and update the same in the secure store of configtool.
Restart the engine.Your problem will be solved.If you have any confusion about how to change the pwd in secure store.Feel free to contact

Can not start instance SAP - ABAP Database is not available via R3trans

Dear all !
My OS : Linux RHEL 4U7 32bit
Oracle 10G R2 32bit 10.2.0.2
when system running but power off suddenly
and when power on ->
i am having problem as below when i start instance SAP (Databse Oracle Started)
Step 1 : I login user (ora<sid>) of Oracel to start up database
Database startup -> OK
then i tried to shutdown database -> OK too
and start up again -> OK
Query -> OK
I think Database do not problem
Step 2: start listener -> OK
Step 3: i login user (<sid>adm) and startup instance SAP (command : startsap r3) with error:
Checking SED Database
ABAP Database is not available via R3trans
Starting SAP-Collector Daemon
11:11:48 10.02.2010   LOG: Effective User Id is root
This is Saposcol Version COLL 20.90 700 - Intel x86 with Linux, PL:75, Aug 29 2006
Usage: saposcol -l: Start OS Collector
        saposcol -k: Stop OS Collector
        saposcol -d: OS Collector Dialog Mode
        saposcol -s: OS Collector Status
The OS Collector (PID 6870) is already running .....
saposcol already running
ABAP Database SED must be started first
Please help me to resolve this problem
Thanks for your advice

Dear all !
1. output of tnsping SED :
TNS Ping Utility for Linux: Version 10.2.0.2.0 - Production on 11-FEB-2010 13:51:24
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
/oracle/SED/102_32/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (COMMUNITY = SAP.WORLD)(PROTOCOL = TCP)(HOST = sapsed)(PORT = 1527))) (CONNECT_DATA = (SID = SED) (GLOBAL_NAME = SED.WORLD)))
OK (0 msec)
2. output startsap_.log
Checking SED Database
ABAP Database is not available via R3trans
Starting SAP-Collector Daemon
saposcol already running
ABAP Database SED must be started first
---> output above repeats many
3. output trans.log
4 ETW000 R3trans version 6.14 (release 700 - 18.09.06 - 09:35:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time   : 11.02.2010 - 13:49:36
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc     ,00000] Thu Feb 11 13:49:36 2010                             159 0.000159
4 ETW000 [dev trc     ,00000] db_con_init called                                    27 0.000186
4 ETW000 [dev trc     ,00000] create_con (con_name=R/3)                             55 0.000241
4 ETW000 [dev trc     ,00000] Loading DB library '/usr/sap/SED/SYS/exe/run/dboraslib.so' ...
4 ETW000                                                                              63 0.000304
4 ETW000 [dev trc     ,00000] load shared library (/usr/sap/SED/SYS/exe/run/dboraslib.so), hdl 0
4 ETW000                                                                           16430 0.016734
4 ETW000 [dev trc     ,00000] Library '/usr/sap/SED/SYS/exe/run/dboraslib.so' loaded
4 ETW000                                                                              56 0.016790
4 ETW000 [dev trc     ,00000] function DbSlExpFuns loaded from library /usr/sap/SED/SYS/exe/run/dboraslib.so
4 ETW000                                                                              41 0.016831
4 ETW000 [dev trc     ,00000] Version of '/usr/sap/SED/SYS/exe/run/dboraslib.so' is "700.08", patchlevel (0.73)
4 ETW000                                                                              94 0.016925
4 ETW000 [dev trc     ,00000] function dsql_db_init loaded from library /usr/sap/SED/SYS/exe/run/dboraslib.so
4 ETW000                                                                              38 0.016963
4 ETW000 [dev trc     ,00000] function dbdd_exp_funs loaded from library /usr/sap/SED/SYS/exe/run/dboraslib.so
4 ETW000                                                                              68 0.017031
4 ETW000 [dev trc     ,00000] New connection 0 created                              44 0.017075
4 ETW000 [dev trc     ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000                                                                              46 0.017121
4 ETW000 [dev trc     ,00000] db_con_connect (con_name=R/3)                         38 0.017159
4 ETW000 [dev trc     ,00000] find_con_by_name found the following connection for reuse:
4 ETW000                                                                              37 0.017196
4 ETW000 [dev trc     ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000                                                                              39 0.017235
4 ETW000 [dev trc     ,00000] Oracle Client Version: '10.2.0.2.0'                  480 0.017715
4 ETW000 [dev trc     ,00000] -->oci_initialize (con_hdl=0)                         42 0.017757
4 ETW000 [dev trc     ,00000] Client NLS settings: AMERICAN_AMERICA.UTF8          3789 0.021546
4 ETW000 [dev trc     ,00000] Logon as OPS$-user to get SAPSR3's password           48 0.021594
4 ETW000 [dev trc     ,00000] Connecting as /@SED on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
4 ETW000                                                                              51 0.021645
4 ETW000 [dev trc     ,00000] Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
4 ETW000                                                                              43 0.021688
4 ETW000 [dev trc     ,00000]    0 UTF8                                                      1 0x9511ea0 0x951750c 0x9516d94
4 ETW000                                                                              40 0.021728
4 ETW000 [dev trc     ,00000] Allocating service context handle for con_hdl=0       40 0.021768
4 ETW000 [dev trc     ,00000] Allocating server context handle                      52 0.021820
4 ETW000 [dev trc     ,00000] Attaching to DB Server SED (con_hdl=0,svchp=0x9516d20,svrhp=0x9528504)
4 ETW000                                                                              88 0.021908
4 ETW000 [dboci.c     ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12505
4 ETW000                                                                            4712 0.026620
4 ETW000 [dbsloci.    ,00000] *** ERROR => CONNECT failed with sql error '12505'
4 ETW000                                                                              49 0.026669
4 ETW000 [dev trc     ,00000] Try to connect with default password                  62 0.026731
4 ETW000 [dev trc     ,00000] Connecting as SAPSR3/<pwd>@SED on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
4 ETW000                                                                              39 0.026770
4 ETW000 [dev trc     ,00000] Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
4 ETW000                                                                              56 0.026826
4 ETW000 [dev trc     ,00000]    0 UTF8                                                      1 0x9511ea0 0x951750c 0x9516d94
4 ETW000                                                                              47 0.026873
4 ETW000 [dev trc     ,00000] server_detach(con_hdl=0,stale=0,svrhp=0x9528504)
4 ETW000                                                                              37 0.026910
4 ETW000 [dev trc     ,00000] Detaching from DB Server (con_hdl=0,svchp=0x9516d20,srvhp=0x9528504)
4 ETW000                                                                              37 0.026947
4 ETW000 [dev trc     ,00000] Deallocating server context handle 0x9528504          45 0.026992
4 ETW000 [dev trc     ,00000] Allocating server context handle                      48 0.027040
4 ETW000 [dev trc     ,00000] Attaching to DB Server SED (con_hdl=0,svchp=0x9516d20,svrhp=0x9528504)
4 ETW000                                                                              60 0.027100
4 ETW000 [dboci.c     ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12505
4 ETW000                                                                            1538 0.028638
4 ETW000 [dbsloci.    ,00000] *** ERROR => CONNECT failed with sql error '12505'
4 ETW000                                                                              41 0.028679
4 ETW000 [dblink      ,00431] ***LOG BY2=>sql error 12505 performing CON [dblink#3 @ 431]
4 ETW000                                                                             131 0.028810
4 ETW000 [dblink      ,00431] ***LOG BY0=>ORA-12505: TNS:listener does not currently know of SID given in connect descriptor [dblink#3 @ 431]
4 ETW000                                                                              39 0.028849
2EETW169 no connect possible: "DBMS = ORACLE                           --- dbs_ora_tnsname = 'SED'"
thansk for your help
Edited by: myfriend280985 on Feb 11, 2010 7:53 AM

HDV via FireWire output not available

Similar Messages

Maybe you are looking for